Holly Goose Plastic Bag Holder Crochet Pattern

This Holly Goose bag holder turns a pile of grocery bags into a winter decoration. The body is a teardrop of sage green shell lace. Offset tiers of fans stack like scales from a rounded base up to a narrow rim. On the front, a cream goose in a red fringed scarf stands beside a sprig of holly.

The colors are sage green for the holder, cream for the goose, red for the scarf and berries, orange for the beak and feet, dark green for the holly, and a scrap of black for the eye. Layered scalloped feather strips give the goose real depth.

The finished holder is 9 in (22.9 cm) wide and 14 in (35.6 cm) tall. Including the ring, it hangs about 19 in (48.3 cm). All terms are US.

You work the body in the round from the bottom opening up, then add a short border at the top and bottom. A strap is worked from the top border and looped through a covered ring. The appliqués are made separately and sewn to the front. Bags go in at the top and come out through the oval opening at the bottom.

Finished Size and Construction

  • Finished size: 9 in (22.9 cm) wide x 14 in (35.6 cm) tall, flat
  • Hanging length: about 19 in (48.3 cm)
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hooks: 5.0 mm (H-8) for the body; 4.0 mm (G-6) for the appliqués
  • Pieces: 1 body (with the strap worked on), 1 covered ring, 16 small appliqué parts
  • Layout: goose centered on the front, holly at its lower right
  • Body width: 5 in (12.7 cm) at the opening, 9 in (22.9 cm) at the widest point, 5 in (12.7 cm) at the rim
  • Size before border: 13.25 in (33.7 cm) tall
  • Border depth: 0.5 in (1.3 cm) at the top; 0.25 in (0.6 cm) at the bottom

Materials

Use cotton or a cotton blend. Cotton keeps the shells crisp, resists stretching under the weight of the bags, and washes well. Avoid fuzzy acrylic, because it blurs the lace.

  • Sage green (body, strap, ring): 120 g / 204 m
  • Cream (goose): 20 g / 34 m
  • Red (scarf, berries): 15 g / 26 m
  • Orange (beak, feet): 5 g / 9 m
  • Dark green (holly): 5 g / 9 m
  • Black (eye): 1 m scrap

These quantities include about 15% extra.

Tools:
– 5.0 mm and 4.0 mm hooks
– 3 in (7.6 cm) plastic or metal ring
– Tapestry needle
– 4 stitch markers
– Pins
– Scissors
– Cardboard, 8 x 12 in (20.3 x 30.5 cm)
– Blocking mats

Abbreviations (US Terms)

ch – chain; sl st – slip stitch; sc – single crochet; hdc – half double crochet; dc – double crochet; BLO – back loop only; sk – skip; sp(s) – space(s); rep – repeat.

Shell: the stated number of dc (3, 5, 7 or 9) worked in the same stitch.

Arch round: a round with a sc in the center dc of each shell, and chains and a dc over each sc between shells. The next shells go into those dc, which offsets each new tier of fans.

Gauge and Checkpoints

Gauge (5.0 mm hook):
– 16 sc and 17 rounds = 4 in (10.2 cm)
– One 7-dc shell repeat = 2 in (5.1 cm) wide
– One arch round plus one shell round = 1.5 in (3.8 cm) tall

Test swatch: Ch 26. Sc in the 2nd ch from the hook and in each ch across (25 sc). Next row: ch 1, sc in the first st, then (sk 3, 7 dc in the next st, sk 3, sc in the next st) 3 times. The 3 shells should measure 6 in (15.2 cm) across.

Checkpoints (measured flat):
– After Rnd 4: 8 in (20.3 cm) wide, 1.25 in (3.2 cm) tall
– After Rnd 9: 9 in (22.9 cm) wide, 5 in (12.7 cm) tall
– After Rnd 13: 8 in (20.3 cm) wide, 8 in (20.3 cm) tall
– After Rnd 19: 12.5 in (31.8 cm) tall
– After Rnd 21: 5 in (12.7 cm) wide, 13.25 in (33.7 cm) tall

If your piece is too big, go down a hook size. If it’s too small, go up a size. Don’t change the stitch counts: the 8-repeat structure controls the shape.

Cream crocheted goose with orange beak and feet, red fringed scarf, on sage green textured background with holly.

Body

Use sage green and the 5.0 mm hook. Don’t turn between rounds.

Foundation: Ch 40 and join with a sl st, without twisting. This ring of chains becomes the bottom opening.

Rnd 1: Ch 1, sc in each ch; join. (40 sc)

Rnd 2: Ch 2 (doesn’t count as a st), *hdc in next 4 sts, 2 hdc in next st; rep from * 7 more times; join. (48 hdc)

Rnd 3: Ch 1, *sc in next 5 sts, 2 sc in next st; rep from * 7 more times; join. (56 sc)

Rnd 4: Ch 3 (counts as dc), dc in next 5 sts, 2 dc in next st, *dc in next 6 sts, 2 dc in next st; rep from * 6 more times; join. (64 dc)

Rnd 5: Ch 1, sc in same st, *sk 3, 7 dc in next st, sk 3, sc in next st; rep from * around, omitting the last sc; join. (8 shells; 64 sts = 56 dc + 8 sc)

Rnd 6 (arch): Sl st in next 4 dc. Ch 1, sc in same st, *ch 3, dc in next sc, ch 3, sc in center dc of next shell; rep from * around, omitting the last sc; join. (8 sc, 8 dc, 16 ch-3 sps)

Rnd 7: Ch 1, sc in first sc, *sk ch-3 sp, 9 dc in next dc, sk ch-3 sp, sc in next sc; rep from * around, omitting the last sc; join. (8 shells; 80 sts = 72 dc + 8 sc)

Rnd 8: Sl st in next 5 dc, ch 1, sc in same st. Continue as in Rnd 6. (8 sc, 8 dc, 16 ch-3 sps)

Rnd 9: Rep Rnd 7. (80 sts) This is the widest round.

Rnd 10: Sl st in next 5 dc. Work as Rnd 6, but ch 2 instead of ch 3. (8 sc, 8 dc, 16 ch-2 sps)

Rnd 11: Work as Rnd 7 with 7-dc shells. (8 shells; 64 sts = 56 dc + 8 sc)

Rnd 12: Sl st in next 4 dc. Work as Rnd 10. (8 sc, 8 dc, 16 ch-2 sps)

Rnd 13: Rep Rnd 11. (64 sts)

Rnd 14: Rep Rnd 12.

Rnd 15: Work as Rnd 7 with 5-dc shells. (8 shells; 48 sts = 40 dc + 8 sc) The piece now measures 7 in (17.8 cm) wide.

Rnd 16: Sl st in next 3 dc. Work as Rnd 6, but ch 1 instead of ch 3. (8 sc, 8 dc, 16 ch-1 sps)

Rnd 17: Rep Rnd 15. (48 sts)

Rnd 18: Rep Rnd 16.

Rnd 19: Work as Rnd 7 with 3-dc shells. (8 shells; 32 sts = 24 dc + 8 sc)

Rnd 20: Sl st in next 2 dc. Work as Rnd 10. (8 sc, 8 dc, 16 ch-2 sps)

Rnd 21 (conversion): Ch 1, *sc in next sc, 2 sc in next ch-2 sp, sc in next dc, sc in next ch-2 sp; rep from * 7 more times; join. (40 sc = 16 worked 1 per st + 24 worked into the sps)

Don’t fasten off. Go straight to the top border.

Covered Ring and Strap

Ring: Join sage green around the 3 in (7.6 cm) ring.
– Rnd 1: Work 60 sc over the ring; join.
– Rnd 2: Sl st in each sc for a raised ridge. (60 sl st)

Fasten off. The covered ring measures 3.5 in (8.9 cm) across.

Strap: Work the strap after the top border. Flatten the body with the round joins at one side fold. Stitches 1–20 are now the front and 21–40 the back.
– Row 1: Join yarn in st 28 of the last border round. Ch 1, sc in the same st and in the next 5 sts. (6 sc)
– Rows 2–14: Ch 1, turn, sc in each st. (6 sc)

Pass the strap through the ring and fold the end to the inside. Whipstitch Row 14 to the inside of the top border. The loop should stand 1.5 in (3.8 cm) above the rim.

Appliqués

Use the 4.0 mm hook. Leave long tails on every piece for sewing.

Goose body (cream): Ch 11.
– Rnd 1: Sc in 2nd ch from hook, sc in next 8 ch, 3 sc in last ch. Working along the other side of the chain, sc in next 8 ch, 2 sc in last ch; join. (22 sc)
– Rnd 2: Ch 1, 2 sc in first st, sc in next 8 sts, 2 sc in each of next 3 sts, sc in next 8 sts, 2 sc in each of last 2 sts; join. (28 sc)
– Rnd 3: Ch 2, 2 hdc in each of first 2 sts, hdc in next 9 sts, 2 hdc in each of next 6 sts, hdc in next 9 sts, 2 hdc in each of last 2 sts; join. (38 hdc)
– Tail: Ch 5. Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, dc in last ch. Sk 2 hdc on the body, sl st in next hdc. Fasten off.

The finished body measures 4 x 2 in (10.2 x 5.1 cm).

Feather strips (cream): Each 5-dc scallop uses 4 chains.
– Strip A: Ch 18. Sc in 2nd ch from hook, sk 1, 5 dc in next ch, sk 1, sc in next ch; rep from * 3 more times. (4 scallops)
–
Strip B: Ch 14 and work as Strip A. (3 scallops)
–
Strip C:* Ch 10 and work as Strip A. (2 scallops)

Head and neck (cream):
– Head: Make a magic ring and work 6 sc into it. Next rnd: 2 sc in each st. (12 sc)
– Neck, Row 1: Ch 1, sc in next 4 sts, turn. (4 sc)
– Neck, Rows 2–10: Ch 1, sc in each st, turn. (4 sc)

Beak (orange): Ch 4. Sl st in 2nd ch from hook, sc in next ch, hdc in last ch.

Feet (orange, make 2): Ch 6. Sl st in 2nd, 3rd and 4th ch from hook for the leg. Work (hdc, dc, hdc) in next ch, then sl st in last ch for the webbed foot.

Scarf (red):
– Wrap: Ch 21. Row 1: hdc in 3rd ch from hook and in each ch across. (19 hdc) Rows 2–3: ch 2, turn, hdc in BLO of each st. (19 hdc)
– Tails (make 2): Ch 13 and work as the wrap. (11 hdc)
– Fringe: Cut 8 strands, each 2 in (5.1 cm) long. Fold each strand and knot it into the bottom edge of a tail, 4 per tail. Trim the fringe to 0.75 in (1.9 cm).

Holly leaves (dark green, make 2): Ch 8.
1. Sl st in 2nd ch from hook, sc in next ch.
2. (Hdc, ch 2, sl st in the hdc) in next ch. (Dc, ch 2, sl st in the dc) in next ch.
3. Hdc in next ch, sc in next ch, 3 sc in last ch.
4. Working along the other side of the chain, repeat the same sequence in reverse; join.

Berries (red, make 3): Work 6 sc in a magic ring. Tuck the tails inside and pull tight to form a 0.5 in (1.3 cm) bobble.

Assembly:
1. Slide the cardboard into the body so you only sew through the front layer.
2. Sew the feathers to the goose body, scallops pointing down:
– Strip A along the lower edge.
– Strip B above it, overlapping A by half a scallop’s height and shifted sideways by half a scallop.
– Strip C near the tail, placed the same way.
3. Sew the neck behind the front end of the body so it curves up and forward. Add the beak, then embroider a black French knot for the eye.
4. Sew the goose to the holder, centered side to side. The feet should sit 4.5 in (11.4 cm) above the bottom edge, and the top of the head 3.5 in (8.9 cm) below the rim. Catch the dc posts as you sew.
5. Sew the feet under the body.
6. Wrap the scarf around the neck and cross it at the front. Tuck both tails under the crossing and stitch them in place.
7. Sew the holly leaves at the goose’s lower right and stack the 3 berries where the leaves meet.

Border

Border gauge: 4 sts per inch. That makes 40 sts = 10 in (25.4 cm) around, or 5 in (12.7 cm) flat with 20 sts per side.

Top border (continue from Rnd 21):
– Rnd 1: Ch 2, hdc in each st; join. (40 hdc; 20 per side)
– Rnd 2: Ch 1, sc in each st; join. (40 sc; 20 per side)

The top border adds 0.5 in (1.3 cm), so the piece now measures 13.75 in (34.9 cm) tall.

Bottom border: Join yarn in a free loop of the foundation chain.
– Rnd 1: Ch 1, sc in each free loop; join. (40 sc; 20 per side)
– Rnd 2: Sl st loosely in each sc; join. (40 sl st; 20 per side)

The bottom border adds 0.25 in (0.6 cm), for a total of 14 in (35.6 cm).

Why the math works: Each border matches its edge one to one: 40 sts on the 40 sc of Rnd 21, and 40 sts in the 40 foundation chains. Nothing is added or removed, so the edges don’t flare or pucker.

Final Blocking

  1. Weave in all ends through solid stitches, not through the lace.
  2. Mist the holder with water until it’s evenly damp.
  3. Lay it flat with the goose facing up.
  4. Pin the widest point to 9 in (22.9 cm). Pin the rim and the opening to 5 in (12.7 cm) each, and the height to 14 in (35.6 cm).
  5. Pin the center dc of each fan to open it up.
  6. Let it dry completely before unpinning.

Final Quality-Control Checklist

  • Every shell round has 8 shells.
  • Each tier of fans is offset from the one below.
  • Both borders have 40 sts.
  • The holder measures 9 in (22.9 cm) wide and 14 in (35.6 cm) tall.
  • The strap is centered on the back, and the ring is fully covered.
  • The appliqués are sewn through the front layer only.
  • The feather strips are staggered.
  • The fringe is trimmed evenly.

Troubleshooting

  • Shells drift sideways: You probably missed the starting sl sts in an arch round. Recount to the center dc.
  • Body is too wide: Your arches are loose. Use ch 2 in Rnds 6–8.
  • Rim ruffles: Recount Rnd 21. It should have 40 sc.
  • Opening stretches: Work the bottom border tighter, or add a round of sl sts.
  • Stitches show on the back: You sewed through both layers. Resew with the cardboard inside.
  • Goose curls: Steam it flat before sewing it on.

Care

Hand wash in cool water, reshape, and dry flat. Don’t tumble dry: the cotton can shrink and the appliqués can distort.

Sage-green crocheted tissue holder with appliqué goose wearing red scarf hanging on rustic farmhouse door.

Final Notes

Here is the measurement chain from bottom to top:
– The 40-st opening is 5 in (12.7 cm) wide.
– At 64 sts, the body is 8 in (20.3 cm) wide.
– At the 9-dc shells, it reaches its widest point, 9 in (22.9 cm).
– The shells then shrink back to a 40-st rim, 5 in (12.7 cm) wide.
– The body is 13.25 in (33.7 cm) tall before the borders and 14 in (35.6 cm) after.

Check your measurements at each stage and the goose will land exactly where it belongs. For a bolder look, make the body in red and keep the goose cream.

Happy crocheting!

Leave a Comment