Aegean Key Bauble Christmas Ornament Crochet Pattern

The Aegean Key Bauble is a small, round crochet ornament with a crisp Greek key band running around its middle. A cream background lets the rust-red meander stand out, and a matching twisted-cord loop and tiny bow finish the top. It looks classic and a little bit vintage, and it suits both a rustic tree and a more modern one.

The ornament is worked in one piece, in continuous single crochet rounds, using US crochet terms throughout. The key band is tapestry crochet: you carry the unused color inside each stitch, so the inside stays neat and there are no long floats to catch.

The finished ornament measures about 2.75 in (7.0 cm) in diameter and about 8.75 in (22.2 cm) around the widest point. The hanging loop adds about 2.5 in (6.4 cm) above the top.

Construction is simple. You start at the bottom with a magic ring, increase to a flat disc, work straight rounds that include the 7-round colorwork band, then decrease, stuff, and close the top. A twisted cord and a bow are added last. Once you have made one in rust, try black, navy, or forest green bands for a full matching set.

Finished Size and Construction

  • Finished size: about 2.75 in (7.0 cm) diameter; 8.75 in (22.2 cm) circumference
  • Skill level: Intermediate (basic tapestry color changes)
  • Terminology: US crochet terms
  • Yarn weight: DK (weight 3)
  • Hook: 3.0 mm (US C/2 or D/3)
  • Number of pieces: 1 (plus a separate cord and bow)
  • Layout: single seamless ball, worked bottom to top in a spiral
  • Piece size: 26 rounds; maximum 48 stitches per round
  • Size before border: the flat base disc after Round 8 measures about 2.75 in (7.0 cm) across
  • Border depth: no edging border; the top closure and the 2.5 in (6.4 cm) hanging loop act as the finishing trim

Materials

Choose a smooth DK yarn with good stitch definition. A cotton or cotton-acrylic blend gives the crispest key pattern. Fuzzy or very soft yarn will blur the meander lines.

  • Main color (MC), cream: 12 g / about 29 m (32 yd)
  • Contrast color (CC), rust red: 6 g / about 14 m (15 yd), including the cord and bow

For the variations, swap CC for black, navy blue, or forest green in the same amount.

Tools:

  • 3.0 mm crochet hook
  • Polyester fiberfill, about 8 g
  • Stitch marker
  • Tapestry needle
  • Scissors
  • Pins (optional, for placing the bow)

Quantities include a margin of about 20% for gauge differences and swatching.

Abbreviations (US Terms)

  • MR – magic ring
  • ch – chain
  • sc – single crochet
  • inc – 2 sc in the same stitch
  • sc2tog – single crochet 2 together (invisible decrease: insert hook in front loops only of the next 2 stitches, yarn over, pull through both loops, yarn over, pull through 2)
  • sl st – slip stitch
  • st(s) – stitch(es)
  • MC / CC – main color / contrast color
  • Rnd – round

Special technique – tapestry color change: Work the last stitch before a color change until 2 loops remain on the hook. Drop the working color, pick up the new color, and pull it through both loops. Lay the unused color along the tops of the next stitches and work over it, so it stays hidden inside.

Gauge and Checkpoints

Gauge: 11 sc and 12 rnds = 2 in (5.1 cm) in sc worked in the round.

Tapestry crochet usually makes your gauge a little tighter, so carry the second strand while you swatch. The best test is the ornament itself: work Rounds 1–8 first and measure.

Checkpoints:

  • After Round 8: the flat disc measures about 2.75 in (7.0 cm) across and lies flat.
  • After Round 19: the open cup is about 8.75 in (22.2 cm) around the rim and about 1.75 in (4.4 cm) tall when set on the table.
  • Key band: 7 rounds tall, about 1.2 in (3.0 cm).
  • Finished ball: about 2.75 in (7.0 cm) in diameter after stuffing.

If your disc is too big (over 2.9 in / 7.4 cm), go down to a 2.75 mm hook. If it is too small (under 2.6 in / 6.6 cm), go up to a 3.25 mm hook. If the disc ruffles, your increases are too loose for your tension, so go down a hook size. If it cups early, go up a size.

Crocheted holiday ornament with cream and rust striped pattern and matching bow resting on rustic wooden surface.

Pattern

Work in continuous spiral rounds. Do not join or turn. Place a marker in the first stitch of each round and move it up as you go.

Base (Increase Rounds)

With MC:

Rnd 1: MR, 6 sc in ring. (6 sts)

Rnd 2: Inc in each st around. (12 sts)

Rnd 3: Sc 1, inc 6 times. (18 sts)

Rnd 4: Sc 2, inc 6 times. (24 sts)

Rnd 5: Sc 3, inc 6 times. (30 sts)

Rnd 6: Sc 4, inc 6 times. (36 sts)

Rnd 7: Sc 5, inc 6 times. (42 sts)

Rnd 8: Sc 6, inc 6 times. (48 sts)

Checkpoint: the disc measures about 2.75 in (7.0 cm) across.

Lower Sides

Rnds 9–10: Sc in each st around. (48 sts)

On the last stitch of Round 10, change to CC. From here, carry MC inside your stitches.

Greek Key Band

The key motif is 8 stitches wide and 7 rounds tall. It repeats 6 times around (6 × 8 = 48 sts). Carry the unused color inside every stitch in all band rounds. Each round below lists one 8-stitch repeat.

Rnd 11: With CC, sc in each st around. (48 sts: 48 CC)

Rnd 12: 1 CC, 5 MC, 1 CC, 1 MC 6 times. (48 sts: 12 CC, 36 MC)

Rnd 13: 1 CC, 1 MC, 3 CC, 1 MC, 1 CC, 1 MC 6 times. (48 sts: 30 CC, 18 MC)

Rnd 14: 1 CC, 1 MC 24 times. (48 sts: 24 CC, 24 MC)

Rnd 15: 1 CC, 1 MC, 1 CC, 3 MC, 1 CC, 1 MC 6 times. (48 sts: 18 CC, 30 MC)

Rnd 16: 1 CC, 1 MC, 5 CC, 1 MC 6 times. (48 sts: 36 CC, 12 MC)

Rnd 17: With CC, sc in each st around, changing to MC on the last stitch. (48 sts: 48 CC)

How the motif builds: stitch 1 of each repeat is a solid CC column that links the top and bottom lines. Stitch 7 rises from the bottom line, turns left along Round 16, drops down stitch 3, and curls right along Round 13 into the center at stitch 5. Stitches 2 and 8 stay cream and separate one key from the next. After Round 13, check that your CC columns stack straight above each other. If they drift, you are miscounting at the round start.

Cut CC, leaving a 4 in (10.2 cm) tail, and carry the tail inside the first 6–8 MC stitches of the next round to secure it.

Upper Sides

Rnds 18–19: With MC, sc in each st around. (48 sts)

Checkpoint: the open cup is about 8.75 in (22.2 cm) around the rim.

Top Shaping (Decrease Rounds)

Use the invisible decrease for a smooth surface.

Rnd 20: Sc 6, sc2tog 6 times. (42 sts)

Rnd 21: Sc 5, sc2tog 6 times. (36 sts)

Rnd 22: Sc 4, sc2tog 6 times. (30 sts)

Rnd 23: Sc 3, sc2tog 6 times. (24 sts)

Stuff the ball firmly now, pushing fiberfill into the bottom and sides first. At this point the opening is about 1.5 in (3.8 cm) across.

Rnd 24: Sc 2, sc2tog 6 times. (18 sts)

Rnd 25: Sc 1, sc2tog 6 times. (12 sts)

Top up the stuffing so the top is as round as the bottom.

Rnd 26: Sc2tog 6 times. (6 sts)

Fasten off, leaving a 6 in (15.2 cm) tail. Thread it through the front loops of the last 6 sts, pull tight to close, and weave the tail into the center of the ball.

Border (Finishing Trim)

This ornament has no edging border. Its “border” is the top finish: the closure, the hanging loop, and the bow. The math for it is already built into the shaping.

Why the math works: The 8 increase rounds add 6 sts per round (6 to 48). The 7 decrease rounds remove 6 sts per round (48 to 6). The band rounds sit on an even 48 sts, so the 8-stitch key repeat fits exactly 6 times with no partial motif. With 2 plain rounds below the band and 2 above it, the key sits on the equator.

Twisted cord loop: Cut one strand of CC 40 in (101.6 cm) long. Fold it in half, anchor the fold, and twist the two ends together until the strand kinks back on itself. Bring the ends to the fold and let it twist into a cord about 10 in (25.4 cm) long. Knot the loose end.

Fold the cord into a loop about 2.5 in (6.4 cm) tall. With the tapestry needle, thread the cord ends down through the closed center of Round 26 and bring them out 2 stitches apart. Knot them together, then tug the knot gently back inside the ball so it is hidden in the stuffing. The loop should stand straight up.

Bow: Cut a 14 in (35.6 cm) strand of CC. Wrap it around the base of the loop and tie a small bow with loops about 0.75 in (1.9 cm) wide. Trim the tails to about 1 in (2.5 cm). If you like, add a drop of fabric glue to the knot.

Final Blocking

  1. Roll the ball between your palms to even out the stuffing.
  2. Press gently on any flat spots. If needed, push in a little more fiberfill through the stitches with a blunt needle.
  3. Hold a steam iron about 1 in (2.5 cm) above the surface. Do not touch the yarn with the iron, especially if it contains acrylic.
  4. While the yarn is warm and damp, use your fingertip to nudge any wandering key stitches back into straight lines.
  5. Let the ornament dry completely on a towel, bow side up.
  6. Measure: the diameter should be about 2.75 in (7.0 cm).

Final Quality-Control Checklist

  • Every round from 9 to 19 has 48 sts.
  • The key band shows 6 complete motifs with no half motif at the round start.
  • The CC columns line up vertically through Rounds 11–17.
  • No carried yarn shows through on the outside.
  • The ball is firmly stuffed and round, about 2.75 in (7.0 cm) across.
  • The top and bottom holes are fully closed.
  • The loop stands upright and is about 2.5 in (6.4 cm) tall.
  • The bow is centered and securely knotted.

Troubleshooting

The motifs lean or slant. Single crochet in a spiral naturally drifts a little. Keep the hook angle consistent. For straighter columns, work the band in the back loop of the previous round’s stitches.

There is a step at the round start. This jog is normal in spiral work. Keep the round start at the back of the ornament.

Carried color peeks through. Keep the carried strand a little firmer, and keep it lying flat on top of the stitches before you work over them.

The ball is egg-shaped. The top is probably under-stuffed. Add fiberfill before Round 25, not after closing.

The band puckers. The carried strand is too tight. Stretch the fabric gently every few stitches so the carried yarn relaxes.

There are gaps at the decreases. Use the invisible decrease through the front loops only.

Care

Spot clean with mild soap and cool water, then reshape and air dry. Store the ornament wrapped in tissue so the bow and loop keep their shape.

Crocheted rust and cream striped ornament with red ribbon bow hanging on an evergreen branch with golden lights.

Final Notes

The measurement chain is short and easy to check. A gauge of 11 sc and 12 rnds per 2 in (5.1 cm) gives a 48-stitch disc of about 2.75 in (7.0 cm) after Round 8. That same 48-stitch round makes a rim of 8.75 in (22.2 cm) after Round 19, with a 1.2 in (3.0 cm) key band centered between 2 plain rounds on each side. Seven matching decrease rounds close the ball to a finished diameter of about 2.75 in (7.0 cm). A 2.5 in (6.4 cm) loop and a small bow finish the top.

Make one in rust, then add black, navy, and green for a full set on the tree.

Happy crocheting!

Leave a Comment