This curtain is made of hanging strands of small five-petal flowers. Each strand is a column of rounded blossoms linked by short chains, with one light wooden bead between flowers. A pair of beads and a full tassel finish the bottom. Eight strands hang side by side from a rod, so light comes through in a soft, airy way.
The palette is deep burgundy and pale blush pink, alternated strand by strand. The natural wood beads warm up both colors. The look is boho and romantic, and works on a window, a doorway, or a closet opening.
This pattern uses US crochet terms. Each flower measures 3 in (7.6 cm) across. One finished strand, from the top of the hanging loop to the end of the tassel, is 53 in (134.6 cm) long. Hung with strands 4.5 in (11.4 cm) apart, the curtain is about 34.5 in (87.6 cm) wide.
Construction is simple and repetitive. You work three rounds per flower. Each new flower joins to the bead link of the flower above it while you work its last round. When a strand is complete, add a hanging loop at the top, a beaded drop at the bottom, and a tassel.
Finished Size and Construction
- Finished curtain: 8 strands, about 34.5 in (87.6 cm) wide when hung with 4.5 in (11.4 cm) spacing
- Strand length: 53 in (134.6 cm) including loop and tassel
- Skill level: Easy / advanced beginner
- Terminology: US crochet terms
- Yarn weight: Worsted weight (#4) cotton
- Hook: 5.0 mm (US H-8)
- Number of pieces: 64 flowers (8 per strand), 8 tassels
- Layout: 8 columns × 8 rows, colors alternating by column
- Piece size: one flower is 3 in (7.6 cm) across
- Size before border (flowers plus links only): 41.5 in (105.4 cm) per strand
- Border depth (strand ends): 2.5 in (6.4 cm) loop at the top; 3.5 in (8.9 cm) beaded drop plus 5.5 in (14.0 cm) tassel at the bottom
Materials
Choose a smooth, mercerized or combed worsted cotton, about 85 m per 50 g. Cotton holds the petal shape and doesn’t stretch much when it hangs. Avoid fuzzy or very stretchy acrylics, because long strands will slowly grow.
- Color A, Burgundy: 200 g / 340 m (32 flowers, 4 tassels)
- Color B, Blush Pink: 200 g / 340 m (32 flowers, 4 tassels)
- Wooden beads: 72 natural light-wood beads, 12 mm (about 0.5 in), with a hole of at least 4 mm (9 per strand)
Tools:
– 5.0 mm (US H-8) crochet hook
– Tapestry needle
– Fine wire bead threader or dental floss threader
– Stiff card, 6 in (15.2 cm) tall, for the tassels
– Sharp scissors and a ruler
– Stitch markers
– Curtain rod or tension rod, up to 1.25 in (3.2 cm) in diameter
The quantities include a margin of about 20 percent for gauge swatches, tails, and tension differences.
Abbreviations (US Terms)
- ch – chain
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sl st – slip stitch
- st(s) – stitch(es)
- sp – space
- rep – repeat
Special stitch – Bead chain (Bch): Slide one pre-strung bead up against the hook, yarn over beyond the bead, and pull through the loop on the hook. The bead is now locked inside that chain. A Bch counts as 1 ch.
Gauge and Checkpoints
Make one complete flower before you start. Gauge for this design is the flower size, not a square swatch.
- Chain gauge: 4 ch = 1 in (2.5 cm)
- After Round 1: center measures 1 in (2.5 cm) across
- After Round 2: ring of loops measures 1.75 in (4.4 cm) across
- After Round 3: flower measures 3 in (7.6 cm) across, tip to tip over two neighboring petals
- One link (9 ch including 1 bead): 2.5 in (6.4 cm)
If your flower is bigger than 3.25 in (8.3 cm), go down to a 4.5 mm hook. If it’s smaller than 2.75 in (7.0 cm), go up to a 5.5 mm hook. A difference of ±0.25 in (0.6 cm) per flower adds up to ±2 in (5.1 cm) over a strand, so it’s worth checking. Measure the second color as well, because blush and burgundy cottons from different dye lots can work up differently.

Flower Pattern
Before you start each flower, thread its beads onto the yarn with the bead threader:
– Flowers 1–7 of a strand: thread 1 bead
– Flower 8 (bottom flower): thread 2 beads
Push the beads well down the yarn so they stay out of the way while you work.
Round 1: Make a magic ring. Ch 1, work 10 sc into the ring, then sl st to the first sc. Pull the ring tight. (10 sc)
Round 2: Ch 1, sc in the first sc, ch 5, skip the next sc. Sc in the next sc, ch 5, skip the next sc. Rep from * 3 more times, then sl st to the first sc. (5 sc, 5 ch-5 loops)*
Each ch-5 loop arches over a skipped stitch. This leaves the open hole you see inside each petal.
Round 3: Sl st into the first ch-5 loop. Work (sc, hdc, 7 dc, hdc, sc) in each ch-5 loop around, then sl st to the first sc. (55 sts: 5 petals × 11 sts)
Neighboring petals touch at the valleys, which sit above the Round 2 sc stitches. The round ends at the valley between petal 5 and petal 1.
Marking the flower: Petal 3 is the top petal, and its 4th dc (the 6th of its 11 sts) is the top tip. The valley where Round 3 ends is the bottom valley, directly opposite the top tip. This keeps every strand hanging straight.
Make All Pieces
Each strand has 8 flowers, all in one color.
- Color A, Burgundy: 4 strands × 8 flowers = 32 flowers, 4 tassels
- Color B, Blush: 4 strands × 8 flowers = 32 flowers, 4 tassels
- Total: 64 flowers, 8 tassels, 72 beads
Layout as seen from the front (A = burgundy, B = blush; columns are strands 1–8):
Row 1: A B A B A B A B
Row 2: A B A B A B A B
Row 3: A B A B A B A B
Row 4: A B A B A B A B
Row 5: A B A B A B A B
Row 6: A B A B A B A B
Row 7: A B A B A B A B
Row 8: A B A B A B A B
Because every strand has the same counts, the flowers line up in neat horizontal rows across the curtain.
Joining
The flowers in a strand are joined as you go. Each one hangs from the bead link of the flower above it.
Flower 1: Work Rounds 1–3 as written. After joining Round 3 at the bottom valley, make the link:
Link: Ch 4, Bch, ch 4. (9 ch including 1 bead) Fasten off, leaving a 6 in (15.2 cm) tail. Put a stitch marker in the last chain so it can’t unravel.
Flowers 2–8: Work Rounds 1 and 2 as written. In Round 3, work petals 1 and 2 as usual. For petal 3, work (sc, hdc, 4 dc) in the loop. Then drop the loop from your hook and insert the hook from front to back through the last chain of the link above. Pick up the dropped loop and pull it through. Finish the petal with (3 dc, hdc, sc), then work petals 4 and 5 as usual and join at the bottom valley. (55 sts — the join adds no stitches)
On flowers 2–7, make a link after Round 3 exactly as for flower 1. Flower 8 gets its bottom drop instead (see Border).
Stitch-to-stitch logic: Each join connects one top tip (the center dc of petal 3) to one chain at the end of a link. Each link starts at the bottom valley, exactly opposite. This tip-to-valley line keeps the flowers stacked vertically with no twist.
Tension: Make link chains at the same tension as your gauge chains. Tight links make the strand shorter and pull the petals out of shape. Loose links let the beads slide around.
Size checkpoint: 8 flowers × 3 in + 7 links × 2.5 in = 24 in + 17.5 in = 41.5 in (105.4 cm). Measure each strand while it hangs freely. Within ±0.5 in (1.3 cm) is fine.
Weave the link tails back into the link chains so the beads stay centered.
Border (Strand Ends)
On this design, the “border” is the finishing at the top and bottom of each strand. Border gauge: 4 ch = 1 in (2.5 cm), the same as the links.
Top end – hanging loop (worked on flower 1): Join yarn with a sl st into the top tip of flower 1. Ch 20, then sl st into the same top tip. Fasten off and weave in the ends. (20 ch + 2 sl st)
Bottom end – beaded drop (worked on flower 8): After joining Round 3 at the bottom valley, ch 4, Bch, ch 2, Bch, ch 4. Fasten off, leaving a 6 in (15.2 cm) tail. (12 ch including 2 beads)
Tassel: Wrap the strand’s color 40 times around the 6 in (15.2 cm) card. Slide a 12 in (30.5 cm) strand under the wraps at the top edge and tie it tightly. Cut the wraps at the bottom edge. Wrap a second strand of yarn tightly around the bundle 0.75 in (1.9 cm) below the top tie. Do this 6 times, knot it, and bury the ends inside the tassel. Thread the top tie through the last chain of the bottom drop, knot it securely, and bury the tails inside the tassel head. Trim the tassel to 5.5 in (14.0 cm).
Why the math works:
– The 20 ch loop is 5 in (12.7 cm) around and hangs 2.5 in (6.4 cm) deep. It fits a rod up to 1.25 in (3.2 cm) in diameter, which is about 3.9 in (9.9 cm) around, with room to slide.
– The bottom drop has 10 plain ch (2.5 in / 6.4 cm) plus 2 beads (about 1 in / 2.5 cm), so it hangs 3.5 in (8.9 cm).
– Full strand: 2.5 + 41.5 + 3.5 + 5.5 = 53 in (134.6 cm).
To fit a taller opening, add flowers in pairs of colors across all strands. Each added flower plus link adds 5.5 in (14.0 cm) to every strand.
Final Blocking
- Lay all strands flat on a large towel or blocking mats, side by side, with their top tips aligned.
- Mist each flower with cool water until it is damp but not soaked.
- Gently open the five Round 2 holes with your fingertip and round out each petal.
- Pin each flower at 3 in (7.6 cm) across, with one pin in each petal tip.
- Straighten the links so each bead sits in the middle of its chain.
- Comb the tassels straight with your fingers and trim any uneven ends.
- Let everything dry completely, then unpin.
- Hang the strands and let them settle for a day before the final trim.
Final Quality-Control Checklist
- Every flower has 55 sts in Round 3, with 5 open holes and 5 even petals.
- Every flower measures 3 in (7.6 cm) across.
- Each strand has 8 flowers, 7 link beads, and 2 drop beads.
- Every link has 9 ch (including the bead) and measures 2.5 in (6.4 cm).
- Every join sits at the center dc of the top petal.
- All strands measure 53 in (134.6 cm) within ±0.5 in (1.3 cm).
- Colors alternate A, B, A, B across the rod.
- All tails are woven in and all tassel ties are knotted securely.
Troubleshooting
Petals cup or ruffle: Seven dc is too many or too few for your ch-5 loop. Loosen or tighten the loop chains, or change hook size.
Flowers hang tilted: The join isn’t at the center dc of petal 3. Count 6 sts into the petal and redo the join.
Strands are different lengths: Link tension varies. Redo the longest or shortest links to match a 2.5 in (6.4 cm) reference link.
Beads slide along the link: The Bch was worked loosely. Pull the bead chain snug before working the next chain.
Center hole won’t close: Pull the magic ring tail firmly before weaving it in, then weave it in a full circle around the center.
Tassel looks thin: Increase the wraps to 50 for a fuller tassel. This uses about 2 g more yarn per tassel.
Care
Hand wash in cool water with mild soap and press out the water in a towel. Dry the strands flat, then rehang them while slightly damp so they hang straight.

Final Notes
Everything in this design follows from one chain gauge of 4 ch per inch:
– A three-round flower measures 3 in (7.6 cm).
– A 9 ch bead link adds 2.5 in (6.4 cm).
– Eight flowers and seven links make a 41.5 in (105.4 cm) column.
– The 2.5 in (6.4 cm) top loop, 3.5 in (8.9 cm) beaded drop, and 5.5 in (14.0 cm) tassel bring each strand to 53 in (134.6 cm).
Check your first flower against these numbers and the other 63 will follow. Happy crocheting!