Blossom Lattice Three-Tier Toilet Paper Holder Crochet Pattern

This hanging toilet paper holder has three round baskets, one above the other, held by two cream straps that meet at a wooden ring. Each basket has an open diamond mesh with soft pink five-petal flowers, plus a scalloped cream rim that looks a little like lace.

The colors are cream and dusty pink with a natural wood ring, so it suits a light, calm bathroom. Each basket holds one standard roll, and the whole holder hangs from a single wall hook.

This pattern uses US crochet terms. Each basket measures 5.4 in (13.7 cm) across and 4 in (10.2 cm) tall. The assembled holder hangs about 28 in (71.1 cm) long, including the ring.

Here is how it comes together. You work each basket from the bottom up: a flat double crochet base, solid single crochet sides, a chain mesh band, and then a shell-and-scallop rim. The pink flowers are made separately and sewn into the mesh. Last, you sew two flat straps down the sides of all three baskets and wrap them around the ring.

Finished Size and Construction

  • Finished size: each basket is 5.4 in (13.7 cm) across and 4 in (10.2 cm) tall; the hanging length is about 28 in (71.1 cm)
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: worsted (#4) cotton
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 3 baskets, 18 flowers, 2 straps, and 1 purchased wooden ring
  • Layout: 3 baskets in a vertical column with 3 in (7.6 cm) of strap between them
  • Piece size: one basket is 5.4 in (13.7 cm) across and 4 in (10.2 cm) tall; one flower is 1.75 in (4.4 cm) across
  • Size before border: the basket is 2.6 in (6.6 cm) tall after Round 12
  • Border depth: the rim (Rounds 13–16) adds 1.4 in (3.6 cm)

Materials

Use a smooth, firm 100% cotton worsted yarn. Cotton keeps its shape when the baskets hold weight, and it handles bathroom humidity well. Avoid acrylic: it stretches, and the baskets will sag over time.

  • Cream (Color A): 150 g, about 240 m. This covers the baskets and the straps.
  • Pink (Color B): 70 g, about 112 m. This covers the 18 flowers.

These quantities include a margin of about 15%.

Tools:
– 4.0 mm (G-6) crochet hook
– 1 natural wooden ring, 2 in (5.1 cm) across
– Tapestry needle
– 4 locking stitch markers
– Scissors
– Pins and a tape measure
– Wall hook with screw and anchor, for hanging

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • BLO: back loop only
  • sk: skip
  • sp: space
  • st(s): stitch(es)
  • MR: magic ring

Special stitches
– Shell: 5 dc in the same stitch.
– Scallop: (sc, hdc, 5 dc, hdc, sc) all in the same chain space. This makes 9 stitches.

Gauge and Checkpoints

Gauge: 17 sc = 4 in (10.2 cm) with the 4.0 mm hook.

Make one full basket before you start the others. If that basket fits a roll, the rest of the project will fit too.

Checkpoints for the base (measure flat, across the widest point):
– After Round 2: 1.8 in (4.6 cm)
– After Round 4: 3.6 in (9.1 cm)
– After Round 6: 5.4 in (13.7 cm)

Checkpoints for the sides:
– After Round 9, the sides stand 0.6 in (1.5 cm) tall.
– After Round 12, the sides stand 2.6 in (6.6 cm) tall.
– After Round 16, the basket is 4 in (10.2 cm) tall.
– The outside circumference is about 17 in (43.2 cm).

If your base is too big, go down to a 3.75 mm hook. If it is too small, go up to a 4.5 mm hook. Do not add or remove rounds to fix the size. The mesh and the rim need exactly 72 stitches.

Close-up of thick cream rope crochet border with centered pink five-petaled flower against softly blurred neutral background.

Basket (Make 3)

Use Color A throughout. Join every round with a sl st to the first stitch. The ch-1 or ch-3 at the start of a round does not count as a stitch unless the instructions say so.

Base

Round 1: Make an MR. Ch 3 (counts as 1 dc), then work 11 dc in the ring. Pull the ring closed and join. (12 sts)

Round 2: Ch 3 (counts as 1 dc). Work 1 dc in the same st, then 2 dc in each st around. Join. (24 sts)

Round 3: Ch 3. Work 1 dc in the same st and 1 dc in the next st. Work 2 dc in the next st, then 1 dc in the next st. Repeat from * to * around. Join. (36 sts)

Round 4: Ch 3. Work 1 dc in the same st and 1 dc in each of the next 2 sts. Work 2 dc in the next st, then 1 dc in each of the next 2 sts. Repeat around. Join. (48 sts)

Round 5: Ch 3. Work 1 dc in the same st and 1 dc in each of the next 3 sts. Work 2 dc in the next st, then 1 dc in each of the next 3 sts. Repeat around. Join. (60 sts)

Round 6: Ch 3. Work 1 dc in the same st and 1 dc in each of the next 4 sts. Work 2 dc in the next st, then 1 dc in each of the next 4 sts. Repeat around. Join. (72 sts)

The base should now be flat and measure 5.4 in (13.7 cm) across. If it ruffles, your tension is too loose. If it cups, it is too tight.

Sides

Round 7: Ch 1, then work 1 sc in the BLO of each st around. Join. (72 sts)

Working in the back loops creates a ridge that turns the work upward to form the wall. Place a marker in stitch 1 and another in stitch 37. These two marked points are directly opposite each other, and the straps will run there.

Rounds 8–9: Ch 1, then work 1 sc in each st around. Join. (72 sts each round)

Mesh Band

Round 10: Ch 1. Work 1 sc in the first st. Ch 5, sk 5 sts, then work 1 sc in the next st. Repeat from * to * 10 more times. Ch 5, sk the last 5 sts, and join to the first sc. (12 sc and 12 ch-5 sps)

The math: each repeat uses 6 stitches (1 sc plus 5 skipped), and 12 × 6 = 72.

Round 11: Sl st into each of the first 3 ch of the first ch-5 sp. Ch 1 and work 1 sc in that same sp. Ch 5, then work 1 sc in the next ch-5 sp. Repeat around. Ch 5 and join to the first sc. (12 ch-5 sps)

Round 12: Repeat Round 11. (12 ch-5 sps)

The three mesh rounds overlap to form 12 open diamonds around the basket. The sides now measure 2.6 in (6.6 cm) tall.

Rim (Rounds 13–16)

The rim works like a border for each basket. It turns the 12 loops of the mesh back into a solid count, then builds the shells, arches, and scallops on top.

Round 13 (conversion round): Sl st into the first ch-5 sp. Ch 1, then work 6 sc in each ch-5 sp around. Join.

The count is (5 sc, one for each chain of the 5-ch space) + (1 extra sc) per space. Over 12 spaces, that gives 12 × 5 + 12 = 72 sts.

Round 14 (shell round): Ch 1. Work 1 sc in the first st. Sk 2 sts, work a shell in the next st, sk 2 sts, then work 1 sc in the next st. Repeat from * to * around, ending with sk 2 sts, a shell in the next st, and sk 2. Join to the first sc.

This gives 12 shells and 12 sc. Each repeat uses 6 base stitches, and 12 × 6 = 72.

Round 15 (arch round): Sl st across to the center (3rd) dc of the first shell. Ch 1 and work 1 sc in that same dc. Ch 7, then work 1 sc in the center dc of the next shell. Repeat around. Ch 7 and join to the first sc. (12 ch-7 arches)

Round 16 (scallop round): Sl st into the first ch-7 sp. Work a scallop in each ch-7 sp around. Join and fasten off.

The count is 12 scallops × 9 sts = 108 sts.

Why the math works: every rim round is built on 12 repeats, and each repeat sits on top of one of the 12 mesh loops. Because the repeats line up, the rim stays the same size as the sides instead of pulling them in or making them flare.

The basket now measures 4 in (10.2 cm) tall. The scallops add a gentle flare at the top. Weave in all ends.

Flower (Make 18)

Use Color B.

Round 1: Make an MR. Ch 1, then work 10 sc in the ring. Pull the ring nearly closed, leaving a small hole in the center, and join. (10 sts)

Round 2: In the next st, work (sc, hdc, dc). In the next st, work (dc, hdc, sc). Repeat from * to * 4 more times. Join to the first sc. (30 sts, 5 petals)

Fasten off and leave a 10 in (25.4 cm) tail for sewing. The flower measures 1.75 in (4.4 cm) across.

Make All Pieces

  • Color A: 3 baskets and 2 straps
  • Color B: 18 flowers, 6 for each basket

Strap (make 2), Color A:
1. Ch 121.
2. Row 1: Work 1 sc in the 2nd ch from the hook and in each ch across. (120 sts)
3. Row 2: Ch 1 and turn. Work 1 sc in each st across. (120 sts)
4. Fasten off.

Each strap is about 0.5 in (1.3 cm) wide and 28 in (71.1 cm) long, which matches the 17 sc = 4 in gauge.

Layout (front view):

            [ RING ]
           /        \
     strap 8.5 in     strap
         /              \
   [ TOP BASKET    4 in ]
   |  3 in strap gap    |
   [ MIDDLE BASKET 4 in ]
   |  3 in strap gap    |
   [ BOTTOM BASKET 4 in ]

Joining

Flowers to the baskets: number the 12 mesh diamonds from 1 to 12, starting at the diamond above the stitch 1 marker. The diamond above the stitch 37 marker is diamond 7.

Pin one flower over the center of each even-numbered diamond (2, 4, 6, 8, 10, and 12). That is 6 flowers per basket, spaced evenly around. The odd-numbered diamonds stay open, and the straps will lie over diamonds 1 and 7.

Sew each flower in place with its tail. Tack the tip of each petal to the mesh chain beneath it, and make one stitch through the flower’s center to anchor it. The edges of the petals should rest over the sides of the diamond.

Straps to the baskets: lay the three baskets in a column. Starting at the bottom end of one strap, sew 4 in (10.2 cm) of the strap down the outside of the bottom basket, from the Round 7 ridge to the top of the rim, along the stitch 1 marker.

Leave 3 in (7.6 cm) of strap free. Then sew the next 4 in (10.2 cm) to the middle basket. Leave another 3 in (7.6 cm) free, and sew the next 4 in (10.2 cm) to the top basket.

That uses 4 + 3 + 4 + 3 + 4 = 18 in (45.7 cm) of the strap. The remaining 10 in (25.4 cm) goes to the ring.

Repeat with the second strap along the stitch 37 markers.

Stitch-to-stitch logic: whipstitch through both edges of the strap and into the outside loops of the basket wall. The 2 rows of the strap line up with the solid sc rounds of the basket, and the strap crosses the mesh at the loop joins. Sew into the sc of Rounds 7–9, the sc anchors of the mesh, and the sc of Round 13.

Tension: keep your stitches snug but don’t pull them tight. A strap sewn too tightly will pucker the wall of the basket.

Ring: bring both free ends up through the ring. Leave 8.5 in (21.6 cm) of each strap free between the top basket and the ring. Fold the last 1.5 in (3.8 cm) of each strap back over the ring and sew it down securely.

Size checkpoint: hold the holder up by the ring. It should measure about 28 in (71.1 cm) from the top of the ring to the base of the bottom basket, and all three baskets should hang level.

Final Blocking

  1. Wet the assembled holder in cool water and gently press out the excess. Do not wring it.
  2. Roll it in a towel to remove more water.
  3. Put a toilet paper roll wrapped in plastic wrap into each basket. A 4.5 in (11.4 cm) roll gives the baskets their round shape.
  4. Pull each mesh diamond open evenly, and center each flower in its diamond.
  5. Pin the rim scallops so they flare evenly.
  6. Lay the holder flat with the straps straight, and let it dry completely.
  7. Remove the rolls once it is fully dry.

Final Quality-Control Checklist

  • Each base lies flat and measures 5.4 in (13.7 cm) across.
  • Each basket has 72 sts in Rounds 7–9 and Round 13.
  • Each basket has 12 diamonds, 12 shells, 12 arches, and 108 scallop stitches.
  • There are 6 flowers per basket, all in the even-numbered diamonds.
  • The straps run down opposite sides of every basket.
  • The strap gaps are 3 in (7.6 cm) each, and the ring sections are 8.5 in (21.6 cm) each.
  • All ends are woven in and secure.
  • The holder hangs straight and level.

Troubleshooting

  • The base cups: your tension is tight. Go up half a hook size, or loosen your increases.
  • The base ruffles: your tension is loose. Go down half a hook size.
  • The roll doesn’t fit: your gauge is too small. Remake the basket with a 4.5 mm hook.
  • The mesh is uneven: count 5 chains exactly every time, and make sure the sc sits in the third chain of each loop.
  • The rim pulls inward: your Round 15 chains are too tight. Chain loosely, or work ch 8 instead.
  • The baskets tilt: the straps are attached unevenly. Re-measure the 3 in (7.6 cm) gaps and re-sew.
  • The flowers curl: steam-block them flat before you sew them on.

Care

Hand wash the holder in cool water with mild soap, then reshape it and lay it flat to dry. Do not put it in the dryer.

Crocheted hanging organizer with three cream pockets trimmed in pink flowers, holding toilet paper rolls on bathroom wall.

Final Notes

Everything in this holder depends on a few measurements. The 17 sc = 4 in (10.2 cm) gauge gives a base of 5.4 in (13.7 cm) and 72 stitches. Those 72 stitches divide into 12 mesh repeats, and the rim builds on the same 12 repeats, so each basket finishes 4 in (10.2 cm) tall.

Three baskets, two 3 in (7.6 cm) gaps, and two 8.5 in (21.6 cm) strap sections to the ring give a hanging length of about 28 in (71.1 cm). Check each measurement as you go, and the final assembly will line up without extra adjusting.

Happy crocheting!

Leave a Comment