This little Letter O keychain is made in sky blue with eight cream diamonds spaced around the band. Two yellow flowers on green leaves sit over the edge. It is a small project you can finish in an evening, and it makes a personal gift tag, bag charm, or initial keyring.
The fabric is dense tapestry single crochet. You carry the unused color inside the stitches, so the piece is firm and holds its shape on a key ring. The diamonds are small and crisp, and the flowers add a soft cottage-garden touch.
The pattern uses US crochet terms. The finished letter measures 3.5 in (8.9 cm) wide by 4.5 in (11.4 cm) tall, not counting the hanging loop.
You make it as one piece in joined rounds, starting from a chain ring that forms the inner opening and working outward. Diamonds are charted into five of the rounds. Then you add a border round and a hanging loop, finish the inner edge, and sew on the flowers and leaves.
Finished Size and Construction
- Finished size: 3.5 in (8.9 cm) wide × 4.5 in (11.4 cm) tall
- Hanging loop: about 0.75 in (1.9 cm) tall
- Skill level: Intermediate (tapestry color changes)
- Terminology: US crochet terms
- Yarn weight: Sport-weight cotton (weight 2)
- Hook: 2.5 mm (US B/1–C/2)
- Number of pieces: 1 letter, plus 2 flowers and 4 leaves sewn on
- Layout: Single oval ring with 8 diamond segments
- Inner opening: about 1.25 in (3.2 cm) × 2.25 in (5.7 cm)
- Size before border: 3.25 in (8.3 cm) × 4.25 in (10.8 cm)
- Border depth: 0.125 in (0.3 cm) each side, 1 round
Materials
Use a smooth, mercerized sport-weight cotton. Cotton gives clear stitch definition, doesn’t stretch much, and holds up to daily handling on keys. Avoid fuzzy or very soft acrylics, because the diamonds will blur.
- Light blue (main color): 10 g, about 30 m (33 yd)
- Cream (diamonds and flower centers): 6 g, about 18 m (20 yd)
- Yellow (petals): 3 g, about 9 m (10 yd)
- Green (leaves): 2 g, about 6 m (7 yd)
All quantities include a margin for swatching and weaving in ends.
Tools:
– 2.5 mm crochet hook
– Tapestry needle
– Stitch markers (at least 8)
– Scissors
– 1 in (2.5 cm) gold split key ring with a short chain and jump ring
– Rustproof pins and a blocking mat
– Spray bottle with water
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- inc – 2 sc in the same stitch
- st(s) – stitch(es)
- rnd – round
- B – light blue
- C – cream
Tapestry single crochet (special technique): Hold the unused color along the top of the stitches in the previous round, and work each sc over it so it’s hidden inside. To change color, work the last sc before the change until 2 loops remain on the hook. Then yarn over with the new color and pull through. Keep the carried strand relaxed.
Gauge and Checkpoints
Gauge: 7 sc and 8 rnds = 1 in (2.5 cm) in tapestry sc with a 2.5 mm hook.
Make a swatch before you start. Chain 15 and work tapestry sc in rows, carrying the second color, for 16 rows. Your swatch should measure 2 in (5.1 cm) square.
Checkpoints while working (lay the piece flat, don’t stretch it):
– After Rnd 1: The ring lies as a smooth oval, with an opening about 1.25 in (3.2 cm) × 2.25 in (5.7 cm).
– After Rnd 4: The piece measures about 2.25 in (5.7 cm) × 3.25 in (8.3 cm).
– After Rnd 8: The piece measures 3.25 in (8.3 cm) × 4.25 in (10.8 cm).
– After the border: The piece measures 3.5 in (8.9 cm) × 4.5 in (11.4 cm).
Piece too big? Go down to a 2.25 mm hook.
Piece too small or stiff? Go up to a 2.75 mm hook.
Band ruffling? Your rounds are shorter than your stitches are wide, so tighten your carry slightly or go down a hook size.
Band cupping? Your carried strand is pulling. Spread the stitches along the hook after each color change.

Pattern: The Letter O
Notes:
– Every round is divided into 8 equal segments. Each segment holds one diamond.
– Place a marker at the start of each segment on Rnd 1, and move it up as you go.
– Join each round with a sl st to the first sc. Then ch 1 (this doesn’t count as a stitch) and work the first sc into the same stitch as the join.
– Carry C inside the stitches from Rnd 1 through Rnd 8, even in solid-blue rounds. This keeps the fabric the same thickness all over.
– Every diamond is centered on stitch 3 of its segment, from Rnd 3 through Rnd 7.
Foundation: With B, ch 40. Join with a sl st to the first ch to form a ring, taking care not to twist the chain.
Rnd 1 (B): Ch 1, sc in each ch around. Join. (40 sts, 5 per segment)
Place a marker in every 5th stitch to mark the 8 segments. Pick up C and start carrying it.
Rnd 2 (B): Ch 1, [sc in next 4 sts, inc in next st] 8 times. Join. (48 sts, 6 per segment)
Rnd 3: Ch 1, [2 B sc, 1 C sc, 2 B sc, B inc in next st] 8 times. Join. (56 sts, 7 per segment: 8 C, 48 B)
Rnd 4: Ch 1, [1 B sc, 3 C sc, 3 B sc] 8 times. Join. (56 sts, 7 per segment: 24 C, 32 B)
Rnd 5: Ch 1, [5 C sc, 1 B sc, B inc in next st] 8 times. Join. (64 sts, 8 per segment: 40 C, 24 B)
On this round, each diamond reaches its full width of 5 stitches. Three blue stitches separate each diamond from the next.
Rnd 6: Ch 1, [1 B sc, 3 C sc, 3 B sc, B inc in next st] 8 times. Join. (72 sts, 9 per segment: 24 C, 48 B)
Rnd 7: Ch 1, [2 B sc, 1 C sc, 6 B sc] 8 times. Join. (72 sts, 9 per segment: 8 C, 64 B)
Rnd 8 (B): Ch 1, [sc in next 8 sts, inc in next st] 8 times. Join. (80 sts, 10 per segment)
Cut C, leaving a 4 in (10.2 cm) tail to weave in. Check that the piece measures 3.25 in (8.3 cm) × 4.25 in (10.8 cm).
Why the shaping works: A round of sc adds about 6 stitches of circumference for every 1 in (2.5 cm) of band width at this gauge. Increasing 8 stitches on 5 of the 8 rounds averages 5 extra stitches per round. That matches the slightly short height of a single crochet stitch, so the band stays flat.
Border
Border gauge: Same as the body, 7 sts per 1 in (2.5 cm).
Rnd 9, outer border (B): Ch 1, [sc in next 9 sts, inc in next st] 8 times. Join. (88 sts, 11 per segment)
Don’t fasten off yet.
Choose the top: Lay the piece flat with the long axis vertical. Rotate it until one diamond sits at top center. Mark the Rnd 9 stitch directly above that diamond’s center as the “top stitch.”
Hanging loop: Sl st along the edge to the stitch before the top stitch. Ch 10, skip the top stitch, and sl st in the next stitch. Turn, and work 14 sc over the ch-10 loop. Sl st into the border stitch where the loop started. Fasten off.
Inner edge (B): Join B in any foundation chain on the inner opening. Sl st loosely in each of the 40 foundation loops around. Join and fasten off. (40 sl sts)
This hides the chain bumps and gives the inner edge the same smooth finish as the outer edge.
Why the math works: The outer border has 88 stitches, and 88 ÷ 7 = 12.57 in of edge. That matches the measured perimeter of a 3.5 in (8.9 cm) × 4.5 in (11.4 cm) oval. Each of the 8 segments gets exactly 11 border stitches, so the diamonds stay evenly spaced right up to the edge.
Flowers and Leaves (Make 2 flowers, 4 leaves)
Flower center (C): Make a magic ring and work 5 sc into it. Pull the ring closed and join. Fasten off C. (5 sts)
Petals (yellow): Join yellow in any sc. In each sc around, work (sl st, ch 2, 2 dc, ch 2, sl st). Fasten off, leaving a 6 in (15.2 cm) tail for sewing. (5 petals)
Each flower measures about 1 in (2.5 cm) across.
Leaf (green): Ch 6. Starting in the 2nd ch from the hook, work 1 sc, 1 hdc, 1 dc, 1 hdc, then 1 sc in the last ch. Ch 1 to make the tip. Rotate the leaf and work along the other side of the chain: 1 sc, 1 hdc, 1 dc, 1 hdc, 1 sc. Sl st to the first sc. Fasten off, leaving a tail for sewing. (10 sts plus a ch-1 tip)
Each leaf is about 0.75 in (1.9 cm) long.
Assembly: Place one flower over the outer edge at the upper right, about where the 1 o’clock diamond sits, with its center about 0.25 in (0.6 cm) inside the border. Tuck one leaf under its upper-left side and one under its lower-right side, with the tips pointing outward.
Place the second flower the same way at the lower left, at about 7 o’clock, with leaves to its upper left and lower right. Sew the leaves first, then the flowers, stitching through the center round and around the petal bases. Keep your stitches hidden in the blue fabric.
Final Blocking
- Weave in all ends inside the tapestry stitches, before you attach the key ring.
- Pin the piece face down to a mat, shaping a smooth oval that measures 3.5 in (8.9 cm) × 4.5 in (11.4 cm).
- Pin the inner opening to 1.25 in (3.2 cm) × 2.25 in (5.7 cm).
- Spray until damp, but not soaked.
- Press the band gently flat with your palm. Don’t flatten the flowers.
- Leave it to dry completely, which takes at least 6 hours.
- Unpin it. Open the jump ring, slip it through the hanging loop, and close it securely.
Final Quality-Control Checklist
- All 8 diamonds are the same size (1-3-5-3-1 stitches) and evenly spaced.
- Rnd 9 has 88 stitches, and the inner edge has 40 slip stitches.
- No carried cream strand shows through the blue stitches.
- The band lies flat, with no ruffle or cup.
- The finished size is 3.5 in (8.9 cm) × 4.5 in (11.4 cm).
- The hanging loop is centered above a diamond.
- The flowers and leaves are firmly attached at the upper right and lower left.
- The jump ring is fully closed.
Troubleshooting
The diamonds lean to one side. This is normal in joined-round tapestry crochet. Working into the back of the carried strand consistently, or blocking firmly, will minimize it.
Cream shows through the blue. Keep the carried strand tight against the stitch tops, and change colors on the last yarn over only.
The diamond count goes off. Check your segment markers each round. Every segment must match the stitch count given for that round.
The inner opening is too tight. Work the foundation chain with a 3 mm hook, then switch back to 2.5 mm.
The flowers curl. Steam-block them separately before you sew them on.
The hanging loop stretches. Work the 14 sc tightly over the chain, or add a second pass of sl sts.
Care
Hand wash in cool water and lay flat to dry, reshaping it while damp. Remove the metal key ring before washing.

Final Notes
Everything in this pattern follows one measurement chain. Gauge is 7 sts and 8 rnds per 1 in (2.5 cm). Forty foundation chains form a 1.25 in (3.2 cm) × 2.25 in (5.7 cm) opening. Eight rounds build the band to 3.25 in (8.3 cm) × 4.25 in (10.8 cm). The 88-stitch border brings the letter to 3.5 in (8.9 cm) × 4.5 in (11.4 cm).
If you match your gauge on the swatch and check each checkpoint, your diamonds, border, and flowers will line up. Once you’ve made the O, the same segment method works for other round letters and initials.
Happy crocheting!