Bluebell Fans Panel Crochet Pattern

This panel is made of feathery fan shells sitting inside a soft cream mesh. Every fan is a single solid color: light sky blue, deep denim blue, cream, or gray. Each band of fans is shifted half a repeat from the one below, so the colors fall into a calm diagonal pattern that looks good in a cottage-style room as well as a coastal one.

The finished panel measures 13.75 x 14.25 in (34.9 x 36.2 cm) with the scalloped border. Use it as a table mat, a pillow front, a wall hanging, or a sampler panel. The pattern uses US crochet terms throughout.

You make the panel in one piece, working in rows from a cream foundation chain. Fan rows alternate with cream net rows. The fan colors are joined in short lengths, one per fan, and the cream yarn is carried along. A flat cream row squares off the top, and a three-round border finishes the panel.

This pattern is for exactly one panel. Because the panel is one piece, there are no assembly or joining sections.

Finished Size and Construction

  • Finished size: 13.75 x 14.25 in (34.9 x 36.2 cm)
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4)
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 1
  • Layout: 7 fan bands, alternating 4 full fans and 3 full fans plus 2 half fans
  • Pattern repeat: 12 sts = 3 in (7.6 cm) wide
  • Size before border: 12.25 x 12.75 in (31.1 x 32.4 cm)
  • Border depth: 0.75 in (1.9 cm) on each side

Materials

Choose a smooth worsted-weight yarn with good stitch definition. A wool-acrylic blend or a cotton blend works well. Fuzzy yarns blur the fan ribs, and splitty yarns are harder to work around the carried strand. These quantities assume a yarn of about 200 m per 100 g.

  • Cream (MC, also C in the color plan): 50 g, about 100 m (109 yd), for the mesh, cream fans, top row, and border
  • Light Blue (L): 15 g, about 30 m (33 yd)
  • Denim Blue (D): 15 g, about 30 m (33 yd)
  • Gray (G): 15 g, about 30 m (33 yd)

All quantities include a margin of about 50% over the measured use, so you have extra for a gauge swatch and tails.

Tools:

  • 5.0 mm (H-8) crochet hook
  • Tapestry needle
  • Scissors
  • Measuring tape
  • Stitch markers (4)
  • Blocking mat and rustproof pins
  • Spray bottle

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • sk – skip
  • sp(s) – space(s)
  • st(s) – stitch(es)
  • tch – turning chain
  • MC – main color (cream)

Special stitches:

  • Fan: 9 tr in the same st. The 5th tr is the center of the fan.
  • Half fan: at the start of a row, ch 4 (counts as tr) and 4 tr in the same st, for 5 sts. At the end of a row, 5 tr in the same st.
  • Color change: work the last yarn over of the st before the change with the new color.

Gauge and Checkpoints

Gauge: 16 sc = 4 in (10.2 cm). One fan band (one fan row plus one net row) = 1.75 in (4.4 cm) tall.

Test swatch first: Ch 26. Work Rows 1–3 below with 2 repeats instead of 4 (25 sc in Row 1, 2 fans in Row 2). The swatch should be 6.25 in (15.9 cm) wide and 2 in (5.1 cm) tall. If it is wider, go down 0.5 mm. If it is narrower, go up 0.5 mm. If the width is right but the band is too tall, wrap the tr yarn overs a little tighter rather than changing the hook.

Checkpoints on the panel (height includes Row 1):

  • After Row 1: 12.25 in (31.1 cm) wide
  • After Row 3: 2 in (5.1 cm) tall
  • After Row 7: 5.5 in (14.0 cm) tall
  • After Row 11: 9 in (22.9 cm) tall
  • After Row 15: 12.5 in (31.8 cm) tall
  • After Row 16: 12.75 in (32.4 cm) tall, 12.25 in (31.1 cm) wide
Crocheted leaf motifs in blue, gray, and navy on cream lace over wood background.

Carrying the Cream Yarn

The cream yarn is never cut during the body of the panel. Before you start a colored fan, change to the fan color on the last yarn over of the st before it. Then lay the cream strand across the base st and work the first 5 tr of the fan over it. Leave the cream hanging loosely up the back of the last 4 tr and change back to cream on the final yarn over of the 9th tr.

Always keep this short float on the wrong side of the panel. That means it goes behind the work on right-side rows (odd-numbered rows) and in front of the work on wrong-side rows (even-numbered rows).

For each full colored fan, cut a 72 in (182.9 cm) length. For each half fan, cut a 40 in (101.6 cm) length. Leave 6 in (15.2 cm) tails at both ends and weave each tail into its own fan only. Cream fans need no color change.

Fan Color Plan

The colors are listed in the order you work them. ½ = half fan, and C = cream fan worked in MC.

Band 1 (Row 2):   L    G    L    G
Band 2 (Row 4):  ½G   C    D    C   ½L
Band 3 (Row 6):   D    L    G    C
Band 4 (Row 8):  ½C   G    D    L   ½G
Band 5 (Row 10):  L    C    D    G
Band 6 (Row 12): ½G   D    L    C   ½L
Band 7 (Row 14):  C    L    G    D

Totals: 7 full L fans, 6 G, 6 C, and 6 D (25 full fans), plus 6 half fans (3 G, 2 L, 1 C).

Panel Pattern

Foundation: With MC, ch 50.

Row 1 (RS): Sc in the 2nd ch from the hook and in each ch across, turn. (49 sc)

Row 2 (Fan Row A): Ch 1, sc in the first sc, [ch 2, sk 5 sts, fan in the next st, ch 2, sk 5 sts, sc in the next st] 4 times, turn. Each bracket uses 12 sts, so 1 + 48 = 49 sts are used. (4 fans = 36 tr, 5 sc, 8 ch-2 sps)

Row 3 (Net Row): Ch 1, sc in the first sc, [ch 5, sc in the center tr of the next fan, ch 5, sc in the next sc] 4 times, turn. (9 sc, 8 ch-5 arches)

Place a marker in the 2nd, 4th, 6th, and 8th sc of this row; these are the sc above the fan centers. The remaining sc are the 2 edge sc and the 3 “between” sc.

Row 4 (Fan Row B): Ch 4 (counts as tr), 4 tr in the first sc for the half fan. [Ch 2, sc in the next marked sc, ch 2, fan in the next between sc] 3 times, ch 2, sc in the last marked sc, ch 2, 5 tr in the last sc for the second half fan, turn. (37 tr including tch: 3 full fans plus 2 half fans; 4 sc, 8 ch-2 sps)

Move the markers up as you go, or simply count. The fans now sit over the gaps between the Row 2 fans.

Row 5 (Net Row): Ch 1, sc in the first tr. [Ch 5, sc in the next sc, ch 5, sc in the center tr of the next fan] 3 times, ch 5, sc in the next sc, ch 5, sc in the top of the tch, turn. (9 sc, 8 ch-5 arches)

The 2nd, 4th, 6th, and 8th sc now sit above the Row 4 single crochets, which line up with the Row 2 fans.

Row 6 (Fan Row A): Ch 1, sc in the first sc, [ch 2, fan in the next sc, ch 2, sc in the next sc] 4 times, turn. (4 fans = 36 tr, 5 sc, 8 ch-2 sps)

Row 7: Repeat Row 3. (9 sc, 8 ch-5 arches)

Rows 8–15: Work Rows 4, 5, 6, and 7 two more times. Row 15 is a Net Row over a Fan Row A. You now have 7 fan bands. (Row 15: 9 sc, 8 ch-5 arches)

Row 16 (Top Row, MC): Ch 1, sc in the first sc, [5 sc in the next ch-5 arch, sc in the next sc] 8 times. Do not turn. (1 + 8 x 6 = 49 sc)

The panel now matches Row 1 at 49 sts and should measure 12.25 x 12.75 in (31.1 x 32.4 cm).

Border

Border gauge: Round 1 keeps the panel gauge of 4 sc per inch (2.5 cm) along every edge.

Round 1: Continue with MC. Ch 2 in the corner (corner sp). Rotate the panel to work along the side.

  • Side 1: Work 51 sc evenly into the row ends: 1 sc in Row 16, 3 sc in each net row end, 4 sc in each fan row end, and 1 sc in Row 1. That is 1 + 21 + 28 + 1 = 51.
  • Corner: Ch 2.
  • Bottom: Work 49 sc into the free loops of the foundation ch.
  • Corner: Ch 2.
  • Side 2: Work 51 sc as for Side 1.
  • Corner: Ch 2.
  • Top: Work 49 sc, one in each Row 16 st.

Sl st into the first corner sp. (200 sc: 49 / 51 / 49 / 51, plus 4 corner ch-2 sps) In this border the corners are ch-2 sps, and they are not included in the side counts.

Round 2: Ch 1. Work (sc, ch 3, sc) in each corner sp. Along each side, sc in the first st, [ch 3, sk 1 st, sc in the next st] across.

  • On the 49-st sides: 25 sc and 24 ch-3 arches.
  • On the 51-st sides: 26 sc and 25 ch-3 arches.

Sl st to the first sc. (110 sc including 8 corner sc; 102 ch-3 arches including 4 corner arches)

Round 3: Ch 1. Work (sc, hdc, dc, hdc, sc) in each ch-3 arch, and sl st in each sc between arches. (102 scallops = 510 sts, plus 110 sl sts) Fasten off and weave in the ends.

Why the math works: 49 = 1 + (2 x 24) and 51 = 1 + (2 x 25). Each side has an odd count, so the sk-1 arches divide it evenly and every side begins and ends on a sc. The corner arches turn the corners without adding stitches to the sides. Round 1 matches the panel gauge, so the edges lie flat without ruffling or cupping. The three rounds add 0.75 in (1.9 cm) per side, giving 12.25 + 1.5 = 13.75 in (34.9 cm) by 12.75 + 1.5 = 14.25 in (36.2 cm).

Final Blocking

  1. Weave in all fan tails first. Each tail should go only into its own fan.
  2. Mist the panel evenly until it is damp. For a wool blend, use a full wet soak instead.
  3. Lay it right side up on the blocking mat.
  4. Pin the four corners to 13.75 x 14.25 in (34.9 x 36.2 cm).
  5. Pin each scallop point along the edges in a straight line.
  6. Ease each fan open so its tr fan out evenly, then open each cream arch into a smooth curve.
  7. Let the panel dry completely before you unpin it.

Final Quality-Control Checklist

  • 7 fan bands, alternating 4 fans and 3 fans plus 2 half fans
  • Every fan has 9 tr, and every half fan has 5
  • Fan colors match the color plan, with no color next to itself
  • No cream floats showing on the right side
  • Rows 1 and 16 both have 49 sc
  • Border Round 1 has 49 / 51 / 49 / 51 sts per side
  • Border Round 3 has 102 scallops
  • Blocked size is 13.75 x 14.25 in (34.9 x 36.2 cm)
  • Side edges are straight, not wavy

Troubleshooting

  • The panel is narrowing: You may be skipping too many sts in Row 2, or a half fan is missing. Count 9 sc per net row.
  • The fans look flat or crowded: Check that the ch-2 links are there on both sides of every fan.
  • Cream shows through on the right side: The float is on the wrong side of the work. Remember that the float goes behind on RS rows and in front on WS rows.
  • The panel is too tall: Your tr are too loose. Go down a hook size for the fan rows only.
  • The edges are wavy: Recount the row-end sc in Round 1; each side should have exactly 51.
  • The corners are cupping: Make sure each corner arch has a full ch 3.

Care

Hand wash in cool water with a mild wool wash, then press out the water in a towel. Dry flat and reshape to the blocked size.

Crocheted throw with navy, light blue, tan, and brown fan motif hanging from wooden dowel rod in bright sunlit window.

Final Notes

The measurement chain is simple. Your gauge of 16 sc = 4 in (10.2 cm) gives a 49-st panel that is 12.25 in (31.1 cm) wide. Seven bands of 1.75 in (4.4 cm), plus the two sc rows, give a height of 12.75 in (32.4 cm). The 0.75 in (1.9 cm) border then brings the panel to 13.75 x 14.25 in (34.9 x 36.2 cm).

If you check the swatch, the Row 1 width, and each band height, the panel will come out flat and square. If you later want a wider piece in this stitch, add 12 chains to the foundation for each extra repeat.

Happy crocheting!

Leave a Comment