This little ornament is a flat Christmas tree built from lacy fan shells. Three fans sit on the bottom tier, two on the middle tier, and one fan crowns the top. Each fan is edged with small chain arches. This gives the tree a soft, scalloped outline with open diamond windows between the fans.
The canopy is soft blush pink, and the trunk is a neat little rectangle of brown single crochet. A pink chain loop rises from the top fan for hanging. The style is modern and gentle, a nice change from classic red and green. It works on a tree, a gift package, a wreath or a door handle.
The pattern uses US crochet terms. The finished ornament measures about 4 in (10.2 cm) wide and 4 in (10.2 cm) tall without the loop. With the hanging loop it is about 6 in (15.2 cm) tall.
The whole ornament is made in one piece. You chain a foundation, work three treble crochet fans and outline them with chain arches. Then you stack two more tiers on top, working in rows. The hanging loop is made as part of the last row. Next, you work the trunk downward into the foundation chain, and a short pink edging finishes the bottom edge.
Finished Size and Construction
- Finished size: 4 in (10.2 cm) wide × 4 in (10.2 cm) tall, plus a 2 in (5.1 cm) hanging loop
- Skill level: Easy
- Terminology: US crochet terms
- Yarn weight: DK / light worsted (#3)
- Hook: 3.5 mm (US E-4)
- Number of pieces: 1 (a single flat ornament, no joining)
- Layout: 3 tiers of fans stacked 3-2-1, with the trunk centered below the bottom tier
- Piece size: canopy 4 in (10.2 cm) wide × 3 in (7.6 cm) tall; trunk 1 in (2.5 cm) × 1 in (2.5 cm)
- Size before border: 4 in (10.2 cm) × 4 in (10.2 cm); the bottom edging doesn’t change the outer size
- Border depth: one row of single crochet, about 0.17 in (0.4 cm)
Materials
Choose a smooth DK cotton or cotton blend. Cotton shows the fan spokes clearly and keeps a crisp outline after blocking. Soft acrylic also works, but the fans will look a little rounder and less defined. Avoid fuzzy or highly textured yarns, which fill in the diamond windows.
- Blush pink (canopy, loop, edging): 8 g, about 19 m (21 yd)
- Brown (trunk): 3 g, about 7 m (8 yd)
Tools:
- 3.5 mm (US E-4) crochet hook
- Tapestry needle
- Scissors
- Rust-proof pins and a foam blocking mat
- Spray bottle with water
- Optional: fabric stiffener or diluted craft glue, for a firmer ornament
These amounts include a margin of about 25% for a test ornament and for weaving in ends.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- tr – treble crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
- [ ] × n – repeat the steps in brackets n times
Special stitch – Fan: work 9 tr into the same stitch or space. The 9 trebles are numbered tr 1 to tr 9 in the order you make them on that row, so tr 5 is the center.
Arch: a ch-3 loop with a sc at each end. Arches form the scalloped outline of every fan.
Gauge and Checkpoints
Gauge: 20 sc and 24 rows = 4 in (10.2 cm) in single crochet with the 3.5 mm hook. That equals 5 sts and 6 rows per 1 in (2.5 cm).
Because the ornament is small, the best test is to make one complete ornament and measure it at each stage. Lay the piece flat without stretching it, and measure with a rigid ruler rather than a soft tape.
- Foundation chain: the 19 working chains (every chain except the turning chain) measure 3.8 in (9.7 cm).
- After Row 2 (tier 1): about 4 in (10.2 cm) across the fan tops and 1 in (2.5 cm) tall.
- After Row 4 (tier 2): tier 2 is about 2.75 in (7.0 cm) wide, and the canopy is about 2 in (5.1 cm) tall.
- After Row 6 (tier 3): the top fan is about 1.4 in (3.6 cm) wide, and the canopy is about 3 in (7.6 cm) tall.
- Trunk: 1 in (2.5 cm) wide × 1 in (2.5 cm) tall.
If your ornament is too big, go down 0.5 mm in hook size. If it’s too small, go up 0.5 mm. If only the fans are off and the trunk measures correctly, the problem is your treble crochet height. Pull up the first loop a little less if the fans are too tall, or a little more if they’re too short, rather than changing hooks.

Pattern
Tier 1 – Bottom Fans
With pink, ch 20.
Row 1 (RS): Sc in 2nd ch from hook, [sk 2 ch, Fan in next ch, sk 2 ch, sc in next ch] × 3. Turn.
(27 tr + 4 sc = 31 sts: 3 Fans, with 1 sc at each end and 1 sc between Fans.)
Check how the chains are used: 1 sc + 3 repeats × 6 ch = 19 chains, plus 1 turning chain = 20. Each Fan sits in the 3rd chain of its 6-chain repeat. The Fans flare out until their outer trebles almost touch at the top. Keep each treble the same height so the fan tops form a smooth curve.
Row 2 (WS, outline row): Ch 1, sc in first sc, ch 2, sc in tr 1 of the first Fan, [ch 3, sk 1 tr, sc in next tr] × 4 (the sc go into tr 3, 5, 7 and 9), ch 1, sc in tr 1 of next Fan, [ch 3, sk 1 tr, sc in next tr] × 4; repeat from * to * once more, ch 2, sc in last sc. Turn.
(17 sc, 12 ch-3 arches, 2 ch-1 bridges, 2 ch-2 corner sps.)
The ch-1 bridges join tr 9 of one Fan to tr 1 of the next at the top. The gap under each bridge becomes a diamond window between the bottom fans. Each Fan now has 5 sc along its top. The 3rd of these (on tr 5) is the Fan’s center sc.
Tier 2 – Middle Fans
Row 3 (RS): Sl st in first sc, sl st in ch-2 sp, sl st in next sc, [sl st in next arch, sl st in next sc] × 2. That’s 7 sl sts, and you’re now in the center sc of the first Fan. Ch 1, sc in same sc, sk 2 arches, Fan in next ch-1 bridge, sk 2 arches, sc in center sc of next Fan; repeat from * to * once more. Turn and leave the rest of the row unworked.
(18 tr + 3 sc = 21 sts: 2 Fans.)
Each new Fan sits on a bridge, directly above the point where two bottom fans meet. It spans from one center sc to the next, the same distance as one bottom Fan, so all fans come out the same size.
Row 4 (WS, outline row): Ch 1, sc in first sc, ch 2, sc in tr 1 of first Fan, [ch 3, sk 1 tr, sc in next tr] × 4, ch 1, sc in tr 1 of next Fan, [ch 3, sk 1 tr, sc in next tr] × 4, ch 2, sc in last sc. Turn.
(12 sc, 8 ch-3 arches, 1 ch-1 bridge, 2 ch-2 corner sps.)
Tier 3 – Top Fan and Hanging Loop
Row 5 (RS): Sl st in first sc, sl st in ch-2 sp, sl st in next sc, [sl st in next arch, sl st in next sc] × 2. That’s 7 sl sts, ending in the center sc of the first Fan. Ch 1, sc in same sc, sk 2 arches, Fan in ch-1 bridge, sk 2 arches, sc in center sc of next Fan. Turn.
(9 tr + 2 sc = 11 sts: 1 Fan.)
Row 6 (WS, outline row with loop): Ch 1, sc in first sc, ch 2, sc in tr 1, ch 3, sk 1 tr, sc in tr 3, ch 3, sk 1 tr, sc in tr 5, ch 20, sl st in the sc just made (hanging loop), ch 3, sk 1 tr, sc in tr 7, ch 3, sk 1 tr, sc in tr 9, ch 2, sc in last sc. Fasten off.
(7 sc, 4 ch-3 arches, 2 ch-2 corner sps, 1 ch-20 loop.)
The loop comes out of tr 5 at the tip of the tree, so the ornament hangs straight. Folded in half, the ch-20 loop is about 2 in (5.1 cm) tall.
Trunk
Turn the canopy so the foundation chain points up and the RS faces you. Find the free loop directly under the center Fan of Row 1. Count 2 more free loops on each side of it, for 5 loops in total. You’ll work into these loops only.
Row 1: Join brown with a sc in the first of the 5 loops, then sc in each of the next 4 loops. Turn. (5 sc)
Rows 2–6: Ch 1, sc in each sc across. Turn. (5 sc in each row)
Fasten off after Row 6. The trunk is 5 sts × 6 rows, which at gauge measures 1 in (2.5 cm) × 1 in (2.5 cm).
Border (Bottom Edging)
The fans already have their own arch outline, so the only edge left to finish is the foundation chain on each side of the trunk.
Border gauge: the same as the main gauge, 5 sc per 1 in (2.5 cm).
Left side: With the RS facing and the bottom edge up, join pink with a sc in the free loop at the outer corner. Sc in each free loop up to the trunk. (7 sc) Fasten off.
Right side: Join pink with a sc in the free loop next to the other side of the trunk. Sc in each remaining free loop to the outer corner. (7 sc) Fasten off.
Why the math works: The foundation has 19 working chains. The trunk uses 5 of them, which leaves 19 − 5 = 14 loops, split 7 per side. Each side gets 7 sc, one per loop. At 5 sc per inch, each side measures 1.4 in (3.6 cm). Across the whole bottom, 7 + 5 + 7 = 19 sts = 3.8 in (9.7 cm), which matches the foundation checkpoint. Because there is exactly 1 sc per chain, the edging won’t ruffle or pull the bottom fans inward.
Weave in all ends along the back of the sc rows or inside the trunk.
Final Blocking
- Mist the ornament lightly with water until it’s damp, not soaked.
- Lay it on the blocking mat with the RS up.
- Pin the trunk into a 1 in (2.5 cm) × 1 in (2.5 cm) rectangle, square and centered under the middle fan.
- Pin the bottom edge straight at 3.8 in (9.7 cm).
- Pin the two outer bottom corners and the tip of each fan so the canopy measures 4 in (10.2 cm) wide and 3 in (7.6 cm) tall.
- Push a pin into each diamond window to hold it open.
- Pin each ch-3 arch outward so the scallops sit evenly.
- Straighten the hanging loop above the top fan.
- For a firmer ornament, brush on stiffener at this stage.
- Let it dry completely, usually 6–12 hours, before you remove the pins.
Final Quality-Control Checklist
- The bottom tier has 3 Fans, the middle tier 2 and the top tier 1.
- Every Fan has 9 tr and 4 ch-3 arches.
- There are 2 diamond windows between the bottom fans and 1 between the middle fans.
- Each upper Fan is centered above the point where the two Fans below it meet.
- The trunk is 5 sc × 6 rows, centered under the middle bottom Fan.
- The bottom edging has 7 sc on each side.
- The ornament measures 4 in (10.2 cm) × 4 in (10.2 cm), plus a 2 in (5.1 cm) loop.
- The loop is secure and centered at the top.
- All ends are woven in and trimmed.
Troubleshooting
Fans overlap and buckle. Your trebles are too tall or the foundation chain is too tight. Check the 3.8 in (9.7 cm) foundation checkpoint. If needed, make just the chain with a hook one size larger.
The gaps between the bottom fans are too wide. The Fans aren’t flaring enough. Work the trebles a little more loosely, and check that you skipped exactly 2 chains on each side of every Fan.
An upper fan is off-center. You probably finished the slip-stitch travel in the wrong sc. Count again: 7 sl sts should end in the 3rd sc of the first Fan.
The arches look uneven. Check that every arch is anchored on the odd-numbered trebles (1, 3, 5, 7, 9) and not on a skipped treble.
The trunk is crooked. Count the 5 loops again. The middle loop must be directly below the center Fan.
The foundation chain twisted. Before you work Row 1, check that every chain’s “V” faces the same way.
The ornament curls. Block it again while damp, or add a light coat of stiffener.
Care
Hand wash in cool water, press out the water in a towel and dry flat. If you used stiffener, spot clean only, and store the ornament flat between seasons.

Final Notes
The measurements build on each other in a short chain. The 20-chain foundation gives 19 working chains, or 3.8 in (9.7 cm). The three Fans on that base flare to about 4 in (10.2 cm) wide. Each tier adds about 1 in (2.5 cm) of height, for a 3 in (7.6 cm) canopy. The 5 × 6 sc trunk adds 1 in (2.5 cm), so the tree is 4 in (10.2 cm) tall. The 7 + 5 + 7 edging closes the bottom, and the 2 in (5.1 cm) loop brings the total hanging height to 6 in (15.2 cm).
Make one in pink, then try ivory, sage or soft gold for a whole set of matching tree ornaments.
Happy crocheting!