This three-tier hanging holder stacks three small round baskets on two long yellow straps that meet in a point over a wall peg. Each basket holds one standard toilet paper roll and keeps it on display, so the holder works as storage and as decoration.
The baskets have solid butter-yellow bases and short yellow walls. Each one is finished with a deep white rim of two layered fan rounds, so the top edge scallops like a lace crown. The straps are firm yellow cords with a braided-look surface. The two colors keep it bright and cottage-style, which suits a bathroom with natural wood, greenery, and white fixtures.
The pattern uses US crochet terms. Each basket base measures about 5.5 in (14.0 cm) across, each basket is about 3.5 in (8.9 cm) tall, and the scalloped rim flares to about 6.5 in (16.5 cm). Hung up, the holder is about 22.4 in (56.9 cm) from the bottom of the lowest basket to the top of the loop.
You make five pieces: three identical baskets worked in joined rounds from the center out, and two identical straps worked in rows. Then you sew the straps up opposite sides of all three baskets and join their ends at the top to make the hanging point.
Finished Size and Construction
- Finished size (hung): about 6.5 in (16.5 cm) wide × 22.4 in (56.9 cm) tall
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (Category 4) cotton
- Hook: 4.5 mm (US 7)
- Number of pieces: 5 (3 baskets, 2 straps)
- Layout: 3 baskets stacked vertically, 6 in (15.2 cm) apart from base to base
- Piece size (one basket): 5.5 in (14.0 cm) base diameter × 3.5 in (8.9 cm) tall
- Size before rim: 5.5 in (14.0 cm) diameter × 1.3 in (3.3 cm) wall
- Rim depth: about 2.2 in (5.6 cm)
- Strap size: 24 in (61.0 cm) long × 0.5 in (1.3 cm) wide
Materials
Use a smooth, mercerized or combed cotton in worsted weight. Cotton holds the basket shape and the fan rounds better than acrylic, and it won’t stretch as much in a humid bathroom. Quantities below assume about 85 m per 50 g (about 170 m per 100 g).
- Color A, butter yellow: 80 g / 136 m (bases, lower walls, straps)
- Color B, white: 50 g / 85 m (scalloped rims)
Both quantities include a margin of about 20% for gauge swatching and weaving in ends.
Tools:
- 4.5 mm (US 7) crochet hook
- Tapestry needle
- Stitch markers (at least 4)
- Scissors
- Measuring tape
- Spray starch (optional, for rims)
- Plastic canvas circles, 5 in (12.7 cm) across (optional, for extra-firm bases)
- Wooden peg or hook for hanging
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- inc – 2 sc in the same stitch
- BLO – back loop only
- st(s) – stitch(es)
- rep – repeat
- * * – repeat the section between asterisks
Special stitch – Fan: 7 dc worked into the same stitch.
Gauge and Checkpoints
Gauge: 16 sc × 18 rounds = 4 in (10.2 cm) in sc with a 4.5 mm hook.
Make one full basket before the others. It is your gauge swatch, and you can use it as long as it passes these checkpoints:
- After Round 6 (36 sts): base measures 2.75 in (7.0 cm) across.
- After Round 12 (72 sts): base measures 5.5 in (14.0 cm) across and lies flat.
- After Round 17: yellow wall stands 1.1 in (2.8 cm) tall and straight up.
- After Round 22: basket is 3.5 in (8.9 cm) tall and the rim flares to 6.5 in (16.5 cm).
If your base is too big, go down to a 4 mm hook. If it is too small, go up to a 5 mm hook. A standard roll is about 4.5 in (11.4 cm) wide, so your base needs to be at least 5 in (12.7 cm) across or the roll won’t fit.

Basket (Make 3)
Join every round with a sl st to the first st. The ch 1 at the start of a round does not count as a stitch.
Base
With Color A, make a magic ring.
Round 1: Ch 1, 6 sc in ring, join. (6 sts)
Round 2: Ch 1, inc in each st around, join. (12 sts)
Round 3: Ch 1, *sc in next st, inc in next st*, rep 6 times, join. (18 sts)
Round 4: Ch 1, *sc in next 2 sts, inc in next st*, rep 6 times, join. (24 sts)
Round 5: Ch 1, *sc in next 3 sts, inc in next st*, rep 6 times, join. (30 sts)
Round 6: Ch 1, *sc in next 4 sts, inc in next st*, rep 6 times, join. (36 sts)
Checkpoint: 2.75 in (7.0 cm) across.
Round 7: Ch 1, *sc in next 5 sts, inc in next st*, rep 6 times, join. (42 sts)
Round 8: Ch 1, *sc in next 6 sts, inc in next st*, rep 6 times, join. (48 sts)
Round 9: Ch 1, *sc in next 7 sts, inc in next st*, rep 6 times, join. (54 sts)
Round 10: Ch 1, *sc in next 8 sts, inc in next st*, rep 6 times, join. (60 sts)
Round 11: Ch 1, *sc in next 9 sts, inc in next st*, rep 6 times, join. (66 sts)
Round 12: Ch 1, *sc in next 10 sts, inc in next st*, rep 6 times, join. (72 sts)
Checkpoint: 5.5 in (14.0 cm) across and flat. If you want a plastic canvas insert, trim it to fit now. You’ll drop it in after blocking.
Lower Wall
Round 13 (turning round): Ch 1, sc in BLO of each st around, join. (72 sts)
The unused front loops form a neat ridge, and the work starts to turn upward.
Rounds 14–17: Ch 1, sc in each st around, join. (72 sts)
Fasten off Color A. Checkpoint: wall 1.1 in (2.8 cm) tall, sides straight.
Each basket still needs its white rim. Work the Scalloped Shell Rim from the Border section on all three baskets before joining.
Make All Pieces
Straps (Make 2)
With Color A, ch 97.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (96 sts)
Row 2: Ch 1, sl st loosely in each st across. (96 sl sts)
Fasten off and leave a 24 in (61.0 cm) tail for sewing. The slip stitch row gives the strap its braided look and keeps it from stretching. Checkpoint: 24 in (61.0 cm) long at 4 sts per 1 in (2.5 cm).
Quantities per color:
- Color A: 3 bases with lower walls, 2 straps
- Color B: 3 rims
Layout (front view):
/\ <- sts 93-96 overlapped
/ \ <- free strap, sts 63-92
|[Basket 3]| <- strap sts 49-62
| | <- gap, sts 39-48
|[Basket 2]| <- strap sts 25-38
| | <- gap, sts 15-24
|[Basket 1]| <- strap sts 1-14
Joining
Block the baskets after their rims are done (see Final Blocking). Sewing is easier once the walls hold their shape.
Mark the baskets. On each basket, put one marker in a Round 17 st and a second marker 36 sts away, exactly opposite. Keep the color joins at the back.
Stitch-to-stitch logic. Each basket is 3.5 in (8.9 cm) tall, which equals 14 strap sts. Lay the strap wrong side against the outer wall. Strap st 1 sits at the Round 13 ridge and strap st 14 sits at Round 22, between two upper fans.
- With the long tail, whipstitch strap sts 1–14 to Basket 1. Catch one strap st per wall round.
- Leave sts 15–24 free: 10 sts, 2.5 in (6.4 cm).
- Sew sts 25–38 to Basket 2.
- Leave sts 39–48 free.
- Sew sts 49–62 to Basket 3.
- Repeat with the second strap on the opposite markers.
- Bring both free ends up and overlap sts 93–96 of each strap, 1 in (2.5 cm). Sew through both layers to form the point.
Sts 63–92 stay free on each strap: 30 sts, 7.5 in (19.1 cm), forming the triangle.
Tension advice: Sew firmly but don’t pull, because pinched stitches dent the wall. Check that the gaps on both sides match before you sew the next basket.
Size checkpoint: Base-to-base spacing is 24 strap sts, 6 in (15.2 cm). Held by the point, the baskets hang level and the piece measures about 22.4 in (56.9 cm). A 4 in (10.2 cm) tall roll stands slightly above its rim and clears the basket above.
Border: Scalloped Shell Rim (Make 3)
Work in Color B on top of each yellow wall.
Border gauge: One fan repeat uses 6 base sts, or 1.5 in (3.8 cm) of the circumference. 72 sts ÷ 6 = 12 repeats, so each quarter of the basket holds 18 sts and 3 repeats.
Round 18: Join Color B in any st. Ch 1, sc in each st around, join. (72 sts; 18 per quarter)
Round 19 (lower fans): Ch 1, *sc in next st, skip 2 sts, Fan in next st, skip 2 sts*, rep 12 times, join to first sc. (12 sc + 84 dc = 96 sts; 24 per quarter)
Each repeat uses 1 + 2 + 1 + 2 = 6 sts, so 12 × 6 = 72 and the round closes exactly.
Round 20 (lower arcs and stems): Ch 3 (counts as dc), *sc in next 3 dc, 3 sc in center dc, sc in next 3 dc, dc in next sc*, rep 12 times but leave out the final dc, join to top of ch-3. (12 dc + 108 sc = 120 sts; 30 per quarter)
This is a conversion round. Each repeat works 8 sts one-to-one (7 dc + 1 sc) and adds 2 extra sts in the center dc, so 12 × (8 + 2) = 120. The 3-sc points form a white arc over each lower fan, and each dc becomes a stem between fans.
Round 21 (upper fans): Ch 3 (counts as dc), 6 dc in same st, *skip next 4 sc, sc in next sc (center of the 3-sc group), skip next 4 sc, Fan in next dc*, rep 12 times but leave out the final Fan, join to top of ch-3. (84 dc + 12 sc = 96 sts; 24 per quarter)
Each repeat uses 1 + 4 + 1 + 4 = 10 sts of Round 20. The upper fans grow from the stems, so they sit between the lower fans.
Round 22 (top scallop edge): Ch 1, starting in same st as join, *sc in next 3 dc, 3 sc in center dc, sc in next 3 dc, sc in next sc*, rep 12 times, join. (120 sts; 30 per quarter)
This is also a conversion round: 8 sts worked one-to-one plus 2 extra per repeat, so 12 × (8 + 2) = 120. Fasten off and weave in ends.
Why the math works: Every rim round keeps the same 12 repeats, each tied to 6 base sts. The totals switch between 96 and 120 because the fans add height and the 3-sc points add flare. The circumference at the wall doesn’t change. That flare takes the rim from 5.5 in (14.0 cm) to 6.5 in (16.5 cm).
Final Blocking
- Wet each basket, or mist it heavily, and press out the extra water in a towel.
- Slip it over a can or jar about 5.5 in (14.0 cm) across.
- Press the base flat and push the yellow wall straight.
- Open the fans and pinch each 3-sc point upward.
- Mist the rim with spray starch for crisp scallops.
- Let it dry completely, about 24 hours, then add a plastic canvas insert if you’re using one.
- After joining, hang the holder and smooth any twisted strap sections with a damp cloth.
Final Quality-Control Checklist
- Each base is 5.5 in (14.0 cm) across and flat.
- Round 18 has 72 sts, and each fan round has 12 fans.
- Each basket is 3.5 in (8.9 cm) tall with a 6.5 in (16.5 cm) rim.
- Upper fans sit between lower fans all the way around.
- Both straps are 24 in (61.0 cm).
- Strap seams sit exactly opposite each other on every basket.
- Both gaps between baskets measure 2.5 in (6.4 cm).
- The point is sewn through both layers.
- All ends are hidden.
Troubleshooting
Base ripples: Your tension is loose. Go down a hook size.
Base cups: Your tension is tight. Go up a hook size for the base.
Walls lean outward: Redo Round 13 firmly in the BLO.
Fans don’t close the round: Recount Round 18. It must be exactly 72 sts.
Upper fans stack over lower fans: Each Round 21 Fan goes into a stem dc, not into a 3-sc point.
Scallops droop: Starch the rim, or work Round 22 with a 4 mm hook.
Baskets tilt: The straps aren’t opposite. Recount 36 sts between markers and resew.
Straps stretch: Work Row 2 tighter, or add a second sl st row.
Care
Hand wash in cool water and dry flat, reshaping each basket over a can. Don’t use the dryer, because it can shrink cotton and flatten the scallops.

Final Notes
Each measurement depends on the one before it. At 16 sc per 4 in (10.2 cm), Round 12 reaches 72 sts and 5.5 in (14.0 cm). The wall adds 1.1 in (2.8 cm), and 12 fan repeats finish each basket at 3.5 in (8.9 cm) with a 6.5 in (16.5 cm) rim. The 96-st straps are 24 in (61.0 cm) long. They cover 14 sts per basket plus 10-st gaps, which gives 6 in (15.2 cm) spacing and about 22.4 in (56.9 cm) overall. Check each checkpoint before you move on.
Happy crocheting!