Cathedral Arch Hanging Toilet Paper Holder Crochet Pattern

This hanging holder has three round baskets stacked on two slim straps, and it hangs from a wooden ring. Each basket has bands of pointed gothic arches, so it looks light and lacy but still holds a full roll firmly.

The sample uses one color, a soft dusty denim blue in bulky cotton. Cotton holds its shape and washes well. A single solid color lets the arches, braided ridges and rolled rims stand out.

The pattern uses US crochet terms. Each basket is about 6.4 in (16.3 cm) across and 4 in (10.2 cm) tall. The finished holder is about 24 in (61.0 cm) long, measured from the top of the ring to the bottom basket, and about 7 in (17.8 cm) wide.

For each basket, you crochet a flat circular base, work the wall up in joined rounds with two arch rounds, and finish with a crab stitch rim. Then you crochet two straps in rows, sew them to opposite sides of the baskets, and loop the tops around the ring.

Finished Size and Construction

  • Finished size: about 24 in (61.0 cm) long x 7 in (17.8 cm) wide
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Bulky (#5) cotton or cotton blend
  • Hook: 6 mm (US J-10)
  • Number of pieces: 5 crocheted pieces (3 baskets, 2 straps) plus 1 wooden ring
  • Layout: 3 baskets stacked in 1 column, with a strap on the left and right
  • Piece size: each basket is 6.4 in (16.3 cm) across x 4 in (10.2 cm) tall; each strap is 24 in (61.0 cm) x 1 in (2.5 cm)
  • Basket height before rim: about 3.7 in (9.4 cm)
  • Rim depth: about 0.3 in (0.8 cm)

Materials

Choose a firm bulky cotton or cotton blend, about 110 m per 100 g. Soft acrylic will sag under the weight of the rolls. You can also hold two strands of worsted cotton together, as long as you match the gauge.

  • Denim Blue: 300 g, about 330 m (361 yd)

These amounts include a margin of about 15% for swatching and seaming.

Tools:

  • 6 mm (US J-10) crochet hook
  • Wooden ring, about 3 in (7.6 cm) outside diameter
  • 6 locking stitch markers
  • Tapestry needle and scissors
  • Measuring tape
  • Rustproof pins

Abbreviations (US Terms)

  • ch = chain
  • sl st = slip stitch
  • sc = single crochet
  • dc = double crochet
  • tr = treble crochet
  • inc = 2 sc in the same stitch
  • BLO = back loop only
  • rev sc = reverse single crochet (crab stitch)
  • MR = magic ring
  • st(s) = stitch(es)
  • sp = space

Lower arch cluster (LAC): Yo, insert the hook in the next st, pull up a loop, yo and pull through 2 loops. Skip the next 3 sts. Yo, insert the hook in the next st, pull up a loop, yo and pull through 2 loops (3 loops on the hook). Yo and pull through all 3 loops. The two legs spread apart at the bottom and meet at the top, which forms a pointed arch over the skipped sts. The cluster uses 5 sts.

Upper arch cluster (UAC): Work it like the LAC, but make each leg a treble: yo twice, insert the hook, pull up a loop, then (yo, pull through 2) twice. It also uses 5 sts.

Surface braid: Hold the outside of the basket toward you. Insert the hook in an unused front loop, pull up a loop, and pull it through the loop on the hook. Repeat this in each front loop around.

Gauge and Checkpoints

Gauge: 12 sc and 13 rounds = 4 in (10.2 cm), worked in rounds.

Make one full basket before you start the other pieces. It works as your gauge swatch, and it shows you whether a roll fits.

Checkpoints:

  • After Rnd 3 (18 sts): base about 1.9 in (4.8 cm) across
  • After Rnd 6 (36 sts): base about 3.8 in (9.7 cm) across
  • After Rnd 10 (60 sts): base about 6.4 in (16.3 cm) across and lying flat
  • After Rnd 15: wall about 1.8 in (4.6 cm) tall
  • After Rnd 16: wall about 2.8 in (7.1 cm) tall
  • After Rnd 19: wall about 3.7 in (9.4 cm) tall
  • After Rnd 20: wall about 4 in (10.2 cm) tall

If the base is too big (over 6.6 in / 16.8 cm), switch to a 5.5 mm hook. If it is too small (under 6.2 in / 15.7 cm), switch to a 6.5 mm hook. A standard roll is about 4.5 in (11.4 cm) across, so it will not fit in a base smaller than 5.5 in (14.0 cm). For the straps, 12 sts should measure 4 in (10.2 cm).

Blue-gray cable-stitch crochet wrapped around a natural wood ring, displayed on white and gray marble.

Basket (Make 3)

Join each round with a sl st to the first st. The beginning ch does not count as a stitch unless the pattern says it does.

Base

Rnd 1: Make a MR. Ch 1, work 6 sc in the ring, join. (6 sts)

Rnd 2: Ch 1, inc in each st around, join. (12 sts)

Rnd 3: Ch 1, sc in the next st, inc; repeat from * 6 times total, join. (18 sts)

Rnd 4: Ch 1, sc in the next 2 sts, inc; repeat 6 times total, join. (24 sts)

Rnd 5: Ch 1, sc in the next st, inc, sc in the next 3 sts, inc; repeat 4 times, sc in the last 2 sts, join. (30 sts)

Rnd 6: Ch 1, sc in the next 4 sts, inc; repeat 6 times total, join. (36 sts)

Rnd 7: Ch 1, sc in the next 2 sts, inc, sc in the next 5 sts, inc; repeat 4 times, sc in the last 3 sts, join. (42 sts)

Rnd 8: Ch 1, sc in the next 6 sts, inc; repeat 6 times total, join. (48 sts)

Rnd 9: Ch 1, sc in the next 3 sts, inc, sc in the next 7 sts, inc; repeat 4 times, sc in the last 4 sts, join. (54 sts)

Rnd 10: Ch 1, sc in the next 8 sts, inc; repeat 6 times total, join. (60 sts)

The increases are staggered so the base stays round and does not turn into a hexagon.

Wall

Rnd 11: Ch 1, sc in the BLO of each st around, join. (60 sts) The front loops of Rnd 10 stay free for the base braid.

Rnd 12: Ch 1, sc in each st around, join. (60 sts)

Rnd 13 (lower arches): Ch 3 (counts as the first dc, which is the first pillar), ch 2, LAC over the next 5 sts, ch 2, dc in the next st, ch 2, LAC over the next 5 sts, ch 2; repeat from * 8 more times, join to the top of the beginning ch-3. (10 pillars, 10 LAC, 20 ch-2 sps)

Each repeat uses 6 sts (1 pillar + 5 under the cluster). 10 repeats x 6 = 60 sts.

Rnd 14: Ch 1, sc in the pillar, 2 sc in the ch-2 sp, sc in the top of the LAC, 2 sc in the ch-2 sp; repeat 10 times total, join. (20 sc in stitches + 40 sc in spaces = 60 sts)

Rnd 15: Ch 1, sc in the BLO of each st around, join. (60 sts) The front loops of Rnd 14 stay free for the middle braid.

Rnd 16 (upper arches): Ch 4 (counts as the first tr, which is the first pillar), ch 2, UAC over the next 5 sts, ch 2, tr in the next st, ch 2, UAC over the next 5 sts, ch 2; repeat from * 8 more times, join to the top of the beginning ch-4. (10 pillars, 10 UAC, 20 ch-2 sps) The pillars sit directly above the pillars in Rnd 13.

Rnd 17: Ch 1, sc in the pillar, 2 sc in the ch-2 sp, sc in the top of the UAC, 2 sc in the ch-2 sp; repeat 10 times total, join. (20 sc in stitches + 40 sc in spaces = 60 sts)

Rnds 18–19: Ch 1, sc in each st around, join. (60 sts)

Keep the loop on the hook. Rnd 20 is the rim, worked in the Rims and Edge Finishes section.

Strap (Make 2)

Foundation: Ch 73.

Row 1: Sc in the 2nd ch from the hook and in each ch across, turn. (72 sts)

Rows 2–3: Ch 1, sc in each st across, turn. (72 sts)

Each strap is 72 sts long, which is 24 in (61.0 cm), and about 1 in (2.5 cm) wide. Place markers along one long edge:

  • Sts 1–12: bottom basket, 4 in (10.2 cm)
  • Sts 13–16: gap, 1.33 in (3.4 cm)
  • Sts 17–28: middle basket, 4 in (10.2 cm)
  • Sts 29–32: gap, 1.33 in (3.4 cm)
  • Sts 33–44: top basket, 4 in (10.2 cm)
  • Sts 45–65: free strap up to the ring, 7 in (17.8 cm)
  • Sts 66–72: loop around the ring, 2.33 in (5.9 cm)

Make All Pieces

Make all pieces in Denim Blue: 3 baskets and 2 straps. You also need 1 wooden ring.

Layout (front view):

            ( RING )
            /      \
      Strap A      Strap B
           |  TOP   |
           |   gap  |
           | MIDDLE |
           |   gap  |
           | BOTTOM |

Joining

Mark the strap positions. On each basket, st 1 is a pillar in Rnds 13 and 16, and the round joins sit above it. Put markers in st 1 and st 31. These two pillars are opposite each other, with 30 sts on each side between them. Strap A covers sts 60, 1 and 2, which also hides the round joins. Strap B covers sts 30, 31 and 32.

Pin. Line up st 1 of the strap with the base braid of the bottom basket and st 12 with its rim. Pin the middle basket at sts 17–28 and the top basket at sts 33–44. Pin Strap B the same way on the other side.

Stitch-to-stitch logic. Each wall (Rnds 11–20) is 4 in (10.2 cm) tall, the same length as 12 strap sts. Anchor the strap at Rnds 11, 12, 14, 15, 17, 18 and 19, at the rim, and through the pillar posts in Rnds 13 and 16. Do not sew into the arch openings.

Method and tension. Whipstitch both long edges of the strap to the wall, one stitch per strap edge stitch. Fasten off after each basket so that a single loose seam cannot affect the other baskets. Keep your stitches snug but not tight. If the wall puckers, the seam is too tight. Leave the gaps unsewn.

Ring. Pass sts 66–72 of each strap through the ring from front to back. Fold the end down so that sts 69–72 lie on the back of sts 62–65, and whipstitch them in place.

Size checkpoint: From the base of the bottom basket to the rim of the top basket, the holder should measure 14.67 in (37.3 cm), which is 44 strap sts. The full holder should hang about 24 in (61.0 cm) long.

Rims and Edge Finishes

Border gauge: Every edge finish is worked 1 st into each existing st, with no increases. The baskets are round, so there are no corners. Each rim matches the wall’s circumference of 60 sts, which is 20 in (50.8 cm).

Top rim (Rnd 20): Ch 1, rev sc in each st around, working from left to right, join. (60 sts) Fasten off. This makes the thick rolled braid, about 0.3 in (0.8 cm) deep.

Base braid: Join yarn in any unused front loop of Rnd 10 and work a surface braid around. (60 sl sts)

Middle braid: Join yarn in any unused front loop of Rnd 14 and work a surface braid around. (60 sl sts) This makes the ridge between the two arch bands.

Strap edging: Sl st in each st along each long edge. (72 sl sts per long side) Skip the short ends, because they will be sewn down or hidden.

Why the math works: Each finish adds exactly 1 stitch for each stitch below it: 60 per basket round and 72 per strap side. Nothing flares or pulls in, so each basket stays 6.4 in (16.3 cm) across.

Final Blocking

  1. Weave in all the ends.
  2. Spray each basket lightly with water until it is damp.
  3. Push the arches up so they are tall and pointed, and open each ch-2 sp with your fingers.
  4. To keep the walls straight while they dry, stand each basket over a jar about 6 in (15.2 cm) across.
  5. Pin the free sections of the straps flat.
  6. Let everything dry completely before you put the rolls in.

Final Quality-Control Checklist

  • Each base has 60 sts and lies flat at about 6.4 in (16.3 cm).
  • Each wall round has 60 sts.
  • Each band has 10 arches, and the pillars line up vertically.
  • All braids and rims go all the way around.
  • Both straps have 72 sts and measure 24 in (61.0 cm).
  • On every basket, the straps sit over sts 1 and 31.
  • Both gaps are 1.33 in (3.4 cm).
  • The holder hangs level.

Troubleshooting

Base cups upward: Your tension is too tight. Go up a hook size.

Base ruffles: You have extra stitches or your tension is too loose. Count each round.

Arches lean: You skipped the wrong number of stitches. Each cluster uses exactly 5 sts, with 3 skipped.

Roll does not fit: The base is too small. Remake it with a larger hook.

Rim flares: Work Rnd 20 with a smaller hook.

Holder hangs crooked: The ring loops are different lengths. Re-sew them so that sts 69–72 match on both straps.

Care

Hand wash in cool water with mild soap, and reshape the arches while the piece is damp. Lay it flat to dry, and keep the wooden ring dry.

Blue macramé crochet toilet paper holder holding three white rolls, displayed in a minimalist bathroom setting.

Final Notes

Here is the measurement chain. A gauge of 12 sc = 4 in (10.2 cm) gives a 60-st base that is 6.4 in (16.3 cm) across and a 60-st wall that is 4 in (10.2 cm) tall. Each 72-st strap is 24 in (61.0 cm) long. It holds three baskets with two 1.33 in (3.4 cm) gaps and leaves 7 in (17.8 cm) of free strap below the ring. Check your first basket against every checkpoint, and the rest will match.

Happy crocheting!

Leave a Comment