The Delft Shell Bag Holder is a tidy kitchen helper. You stuff grocery bags in through the top and pull them out one at a time through a small slot near the bottom. It has a solid cream base, an open royal-blue shell-mesh body, a cream rim band and a sturdy hanging strap. The look is a little like blue-and-white Delft pottery.
The shell rows are offset, so each fan sits between two fans of the row below. This makes a fish-scale lattice that shows off the bags inside and still holds them firmly. A mustard-yellow body with the same cream trim works just as well.
This pattern uses US crochet terms. The finished holder is about 6.5 in (16.5 cm) wide and 12.5 in (31.8 cm) tall without the strap. With the strap it’s about 18.5 in (47.0 cm) long.
The holder is worked as one seamless piece from the bottom up. First you make a flat single-crochet circle, then curve it into a cup. A chain slot goes into the cup wall. Next comes the shell mesh, then a top band that narrows the opening slightly. Last, you work the strap in rows straight off the rim.
Finished Size and Construction
- Finished size: 6.5 in (16.5 cm) wide × 12.5 in (31.8 cm) tall; 18.5 in (47.0 cm) with the strap
- Skill level: Easy / Intermediate
- Terminology: US
- Yarn weight: Worsted (#4), cotton or cotton blend
- Hook: 5.0 mm (H-8)
- Number of pieces: 1 (seamless, worked in the round)
- Layout: cream base cup → blue shell mesh → cream top band → cream strap
- Piece size before top band: 6.5 in (16.5 cm) wide × 11.25 in (28.6 cm) tall
- Top band (border) depth: 1.25 in (3.2 cm)
- Opening at top: about 5.5 in (14.0 cm) across
Materials
Use a smooth, firm cotton or cotton-blend worsted yarn. Cotton barely stretches, so the holder keeps its shape when it’s full of bags. Very soft acrylic will sag. Choose yarn of about 170 m per 100 g.
- Color A, Cream: 80 g, about 136 m (base cup, top band and strap)
- Color B, Royal Blue: 90 g, about 153 m (shell mesh body)
- Optional colorway: swap Color B for mustard yellow in the same amount
Tools
- 5.0 mm (H-8) crochet hook
- 4 locking stitch markers
- Tapestry needle
- Scissors
- Tape measure
- Spray bottle and a tall bottle or rolled towel for blocking
The quantities above include a margin of about 15%, so you won’t run short if your gauge is a little loose.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- inc – 2 sc in the same stitch
- sp – space
- st(s) – stitch(es)
- rnd(s) – round(s)
- MR – magic ring
Special stitch: Shell. Work 5 dc into the same stitch or space.
Arch. A ch-5 that runs from the center dc of one shell to the center dc of the next.
Gauge and Checkpoints
Gauge in sc: 14 sts and 16 rnds = 4 in (10.2 cm). That works out to 3.5 sts and 4 rnds per inch.
Gauge in shell mesh: one 6-stitch repeat = 1.7 in (4.3 cm) wide. One shell round plus one arch round = 1.25 in (3.2 cm) tall.
Gauge controls the circumference, and the circumference decides whether bags fit and dispense properly. Treat the base as your swatch. After Rnd 10, measure the flat circle and compare it with the checkpoint before you go on.
Checkpoints
- After Rnd 10: flat circle 5.5 in (14.0 cm) across.
- After Rnd 20: cream cup 6.5 in (16.5 cm) across, walls 2.5 in (6.4 cm) tall.
- After Rnd 34: piece 11.25 in (28.6 cm) tall.
- After Rnd 39: piece 12.5 in (31.8 cm) tall, opening about 5.5 in (14.0 cm) across.
If your circle is too big: go down 0.5 mm in hook size and start again.
If your circle is too small: go up 0.5 mm in hook size.
Don’t add or remove stitches to fix size. The mesh needs a stitch count that divides by 6.

Base Cup (Color A, Cream)
Work in continuous spiral rounds and move a marker up to the first stitch of each round. Join with a sl st only where the pattern says so.
Rnd 1: 6 sc in MR. (6 sts)
Rnd 2: inc in each st around. (12 sts)
Rnd 3: sc 1, inc 6 times. (18 sts)
Rnd 4: sc 2, inc 6 times. (24 sts)
Rnd 5: sc 3, inc 6 times. (30 sts)
Rnd 6: sc 4, inc 6 times. (36 sts)
Rnd 7: sc 5, inc 6 times. (42 sts)
Rnd 8: sc 6, inc 6 times. (48 sts)
Rnd 9: sc 7, inc 6 times. (54 sts)
Rnd 10: sc 8, inc 6 times. (60 sts)
Checkpoint: the flat circle measures 5.5 in (14.0 cm) across.
The next three rounds slow down the increases so the edge turns upward into a rounded bowl. This is the curved bottom you see in the photo.
Rnd 11: sc 9, inc 6 times. (66 sts)
Rnd 12: sc in each st around. (66 sts)
Rnd 13: sc 10, inc 6 times. (72 sts)
Rnds 14–15: sc in each st around. (72 sts)
Rnd 16 (slot round): sc 32, ch 8, skip next 8 sts, sc 32. (64 sc + 8 ch = 72 sts)
Rnd 17: sc in each sc and in each ch around. (72 sts)
Rnds 18–20: sc in each st around. (72 sts)
Once the strain of the chain pulls on it, the slot relaxes into an oval about 2.3 in (5.8 cm) wide and 0.75 in (1.9 cm) tall. Mark the center of the slot. This is the front of the holder.
At the end of Rnd 20, sl st to the next st to even out the step from the spiral. Fasten off Color A.
Checkpoint: the cup is 6.5 in (16.5 cm) across. 72 sts at 3.5 sts per inch gives a circumference of 20.6 in (52.3 cm). The walls rise 2.5 in (6.4 cm) from where the flat circle ends.
Shell Mesh Body (Color B, Blue)
From here, work in joined rounds. 72 stitches make exactly 12 repeats of 6.
Rnd 21 (foundation shells): Join Color B with a sl st in any st at the side of the cup. Ch 1, sc in same st. Skip 2 sts, shell in next st, skip 2 sts, sc in next st. Repeat from * 10 more times. Then skip 2 sts, shell in next st, skip 2 sts, and sl st to the first sc. (12 shells + 12 sc = 72 sts)
Rnd 22 (arches): Sl st in each of the first 3 dc of the first shell, so you’re at its center dc. Ch 1, sc in the same dc. Ch 5, sc in the center dc of the next shell. Repeat from * 10 more times. Ch 5, sl st to the first sc. (12 sc + 12 ch-5 arches = 72 sts)
Each arch spans the 5 stitches between two shell centers: 2 dc, 1 sc and 2 dc. Five chains over 5 stitches lets the mesh hang straight without gathering or flaring.
Rnd 23 (offset shells): Ch 1, sc in the first sc. Shell in the next ch-5 arch, sc in the next sc. Repeat from * 10 more times. Shell in the last arch, sl st to the first sc. (12 shells + 12 sc = 72 sts)
The new shells sit in the arches, which are centered over the sc points of Rnd 21. Each round of shells therefore lands halfway between the shells below it. This offset makes the fish-scale lattice.
Rnd 24 (arches): Work as Rnd 22. (12 sc + 12 ch-5 arches = 72 sts)
Rnds 25–34: Repeat Rnds 23–24 five more times.
That gives 7 shell rounds (Rnds 21, 23, 25, 27, 29, 31 and 33) and 7 arch rounds, ending with an arch round. Fasten off Color B.
Checkpoint: the blue section is 8.75 in (22.2 cm) tall, from 7 pairs × 1.25 in (3.2 cm). The whole piece is 11.25 in (28.6 cm) tall.
Top Band (Border, Color A, Cream)
Border gauge: same as the base, 14 sc = 4 in (10.2 cm).
Rnd 35: Join Color A with a sl st in any sc of Rnd 34. Ch 1, sc in the same sc. 4 sc in the next ch-5 arch. Sc in the next sc, 4 sc in the next ch-5 arch. Repeat from * 10 more times. Sl st to the first sc. (12 repeats × 5 sts = 60 sts)
Rnds 36–39: Ch 1, sc in each st around, sl st to the first sc. (60 sts)
Finish Rnd 39 with an invisible join and weave in the tail.
Why the math works: each 6-stitch repeat becomes 5 stitches, 1 sc on the sc plus 4 sc in the 5-chain arch. That takes the round from 72 to 60. 60 sts at 3.5 per inch is 17.1 in (43.4 cm) around, an opening about 5.5 in (14.0 cm) wide. The mesh below is 20.6 in (52.3 cm) around, so the band gently gathers the top into the pod shape. That keeps bags from spilling out, while your hand still fits in easily.
Checkpoint: the piece is 12.5 in (31.8 cm) tall and the band is 1.25 in (3.2 cm) deep.
Hanging Strap (Color A, Cream)
Flatten the holder with the slot centered at the front. Find the 5 sts of Rnd 39 directly opposite the slot, at the back, and mark the first and last of them.
Row 1: Join Color A with a sl st in the first marked st. Ch 1, sc in the same st and in the next 4 sts. (5 sts)
Rows 2–40: Ch 1, turn, sc in each st across. (5 sts)
The strap is 1.4 in (3.6 cm) wide and 10 in (25.4 cm) long. Fasten off and leave a 12 in (30.5 cm) tail.
Form the loop: fold the top 4 in (10.2 cm) of the strap (Rows 25–40) toward the back. Whipstitch the edge of Row 40 across Row 24. This leaves 6 in (15.2 cm) of single-layer strap above the rim and a closed loop at the top that fits over a cabinet knob or hook. Weave in the end.
Final Blocking
- Weave in all remaining tails along cream sc stitches, where they’re hidden best.
- Lightly mist the whole holder with water until it’s damp but not wet.
- Slide a tall bottle or a rolled towel about 6.5 in (16.5 cm) wide inside the holder.
- Gently pull each shell open so the fans spread evenly and the arches sit in neat curves.
- Press the base cup into a smooth bowl shape and stretch the slot into its oval.
- Lay the strap flat and straighten its edges.
- Leave it to dry completely, then remove the form.
Final Quality-Control Checklist
- The base circle is flat in the center and curves smoothly up into the walls.
- The slot is 2.3 in (5.8 cm) wide, with no loose or twisted chains.
- Every shell round has 12 shells, and every arch round has 12 arches.
- The shells alternate position from round to round, with no stacked columns.
- The top band has exactly 60 sts and lies flat without ruffling.
- The strap sits directly opposite the slot.
- Total height is 12.5 in (31.8 cm), or 18.5 in (47.0 cm) with the strap.
- All tails are woven in and secure.
Troubleshooting
The base cups too early or ruffles. Your tension is changing as you work. Check the counts in Rnds 1–10 and keep the stitches even.
The shells stack instead of offsetting. You worked shells into sc instead of into the arches. In shell rounds, shells always go in the ch-5 arches.
The arches pull tight and the mesh puckers. Chain more loosely, or use a hook 0.5 mm larger just for the chains.
The mesh flares. Your arches are too long. Make sure each one is exactly 5 chains.
The top band ruffles. Count Rnd 35 again: it should be exactly 60 sts, with 4 sc in each arch, not 5.
Bags fall out of the slot. Your slot is too long. Use ch 6 and skip 6 instead, which keeps the 72-stitch count.
The strap stretches. Work it in tighter sc, or add a row of sl st along each long edge.
Care
Hand wash in cool water with mild soap, reshape, and dry flat over a form. Don’t tumble dry, because cotton can shrink and the shells can lose their shape.

Final Notes
Everything in this pattern follows one measurement chain. The 5.5 in (14.0 cm) circle grows into a 72-stitch, 6.5 in (16.5 cm) cup with 2.5 in (6.4 cm) walls. Twelve 6-stitch shell repeats add 8.75 in (22.2 cm) of mesh, bringing the piece to 11.25 in (28.6 cm). The 60-stitch band adds 1.25 in (3.2 cm), for 12.5 in (31.8 cm) in total. A 6 in (15.2 cm) strap with its folded loop finishes the holder at 18.5 in (47.0 cm).
If you check your gauge at the base, everything that follows will fit. Make one in blue for a classic Delft look, or in yellow for a sunny kitchen.
Happy crocheting!