Evergreen Lace Hanging Toilet Paper Holder Crochet Pattern

This hanging holder has three matching oval baskets stacked one above the other on two teal straps. Each basket has a solid teal base and a ribbed teal lower wall. Above that is a band of cream lace: two rows of upward leaf fans with an open lattice between them and a row of small arches under the rim.

The deep teal and soft cream give it a calm, slightly vintage bathroom look. Each basket holds one standard toilet roll standing upright, and the whole piece hangs from a single wall peg.

The pattern uses US crochet terms. Each basket measures about 6.75 in long x 4.5 in wide x 4 in tall (17.1 x 11.4 x 10.2 cm). The assembled holder hangs about 23 in (58.4 cm) from the peak of the straps to the bottom of the lowest basket.

You work each basket in joined rounds from the center of the base up to the rim. Then you make two flat straps in rows. Last, you sew the straps to the curved ends of the baskets and join the strap tops into a hanging point.

Finished Size and Construction

  • Basket size: 6.75 in x 4.5 in x 4 in (17.1 x 11.4 x 10.2 cm)
  • Hanging length: about 23 in (58.4 cm)
  • Skill level: Intermediate (post stitches, shells, working in rounds)
  • Terminology: US
  • Yarn weight: Bulky (#5) cotton or cotton blend
  • Hook: 5.5 mm (I-9)
  • Number of pieces: 5 (3 baskets, 2 straps)
  • Layout: 3 baskets in a vertical column, 2.67 in (6.8 cm) apart
  • Base size before walls: 6.75 in x 4.5 in (17.1 x 11.4 cm), 56 sts
  • Wall height before rim: about 3.5 in (8.9 cm)
  • Rim (border) depth: 2 rounds, about 0.5 in (1.3 cm)
  • Strap size: 25 in x 0.5 in (63.5 x 1.3 cm)

Materials

Use a smooth, firm bulky cotton. Cotton holds its shape well, which matters for baskets that carry weight. Acrylic will work, but the walls will be softer. Pick a yarn with clear stitch definition so the leaf fans show up well.

  • Color A (Deep Teal): 100 g, about 120 m (131 yd). Used for bases, ribbed lower walls, straps, and sewing.
  • Color B (Cream): 70 g, about 85 m (93 yd). Used for the lace bands and rims.

These quantities include a margin of about 15 percent for your test basket and seams.

Tools:

  • 5.5 mm (I-9) crochet hook
  • Tapestry needle
  • 4 locking stitch markers
  • Scissors and measuring tape
  • Rust-proof pins
  • Spray bottle for blocking
  • Wooden peg or wall hook for hanging

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • st(s) – stitch(es)
  • sp – space
  • blo – back loop only
  • inc – 2 sc in the same st
  • FPdc – front post double crochet: yarn over, insert hook from front to back to front around the post of the stitch, then complete as a dc
  • BPdc – back post double crochet: yarn over, insert hook from back to front to back around the post of the stitch, then complete as a dc
  • rep – repeat

Special stitch – Leaf Fan: 5 dc in the same stitch. Each fan opens upward from a single point, which gives the leaf shape in the lace band.

Gauge and Checkpoints

Gauge: 12 sc and 13 rounds = 4 in (10.2 cm) in sc. In dc, 12 sts and 7 rounds = 4 in (10.2 cm).

Make one complete basket before you start the others. It works as a large gauge swatch, and every later measurement depends on it.

Checkpoints:

  • After Round 4, the base measures about 4.75 in x 2.5 in (12.1 x 6.4 cm).
  • After Round 7, the base measures 6.75 in x 4.5 in (17.1 x 11.4 cm).
  • After Round 10, the teal wall stands about 1.5 in (3.8 cm) tall.
  • After Round 14, the wall stands about 3.5 in (8.9 cm) tall.
  • After Round 16, the wall stands 4 in (10.2 cm) tall.

If your base is too big, go down half a hook size. If it is too small, go up half a hook size. Don’t add or remove rounds. The wall count has to stay at 56 for the lace repeats to fit. If the base is the right size but the wall flares, your post stitches are too loose. Tighten your tension on Rounds 9–10 only.

Crocheted hanging holder with teal rope, wooden toggle, and three white rolls in cream fan-stitch and green crochet bands.

Basket (Make 3)

Work in joined rounds and don’t turn. A ch-1 at the start of a sc round does not count as a stitch. Join each round with a sl st to the first st.

Base

With Color A, ch 10.

Round 1: 3 sc in 2nd ch from hook, sc in next 7 ch, 3 sc in last ch. Rotate the work and sc in the bottom loops of the next 7 ch. Join. (20 sts: 3 per end, 7 per long side)

Round 2: Ch 1, 2 sc in each of next 3 sts, sc in next 7 sts, 2 sc in each of next 3 sts, sc in next 7 sts. Join. (26 sts: 6 per end, 7 per side)

Round 3: Ch 1, [sc in next st, inc] 3 times, sc in next 7 sts, [sc in next st, inc] 3 times, sc in next 7 sts. Join. (32 sts: 9 per end)

Round 4: Ch 1, [sc in next 2 sts, inc] 3 times, sc in next 7 sts, rep bracket once more, sc in next 7 sts. Join. (38 sts: 12 per end)

Round 5: Ch 1, [sc in next 3 sts, inc] 3 times, sc in next 7, rep bracket once more, sc in next 7. Join. (44 sts: 15 per end)

Round 6: Ch 1, [sc in next 4 sts, inc] 3 times, sc in next 7, rep bracket once more, sc in next 7. Join. (50 sts: 18 per end)

Round 7: Ch 1, [sc in next 5 sts, inc] 3 times, sc in next 7, rep bracket once more, sc in next 7. Join. (56 sts: 21 per end, 7 per long side)

Every round adds 3 sts at each curved end and none along the straight sides. That makes 6 per round, the same rate as a flat sc circle split into two halves, so the base lies flat. Place a marker in the 11th st of each 21-st end. That marks the center of each curve, where the straps will be sewn later.

Teal Wall

Round 8 (turning round): Ch 1, sc blo in each st around. Join. (56 sc)

Working into the back loops leaves a ridge of front loops that turns the wall upward and gives the base a crisp edge.

Round 9: Ch 2 (does not count), [FPdc around next st, BPdc around next st] 28 times. Join to first FPdc. (56 sts)

Round 10: Ch 2 (does not count), [FPdc around the FPdc, BPdc around the BPdc] 28 times. Join with Color B by pulling cream through on the final sl st. Cut Color A. (56 sts)

The front posts stack into vertical columns, which makes the ribbed teal band.

Cream Lace Band

Round 11: With Color B, ch 1, sc in each st around. Join. (56 sc)

Round 12 (lower leaf fans): Ch 1, [sc in next st, skip 1 st, Leaf Fan in next st, skip 1 st] 14 times. Join to first sc. (84 sts: 14 sc + 70 dc)

Each repeat uses 4 sts of Round 11: 14 repeats x 4 = 56, with nothing left over.

Round 13 (lattice): Ch 5 (counts as dc + ch 2). [Sc in center dc of next fan, ch 2, dc in next sc, ch 2] 13 times, sc in center dc of last fan, ch 2. Join to 3rd ch of beginning ch-5. (84 sts: 14 dc + 14 sc + 28 ch-2 sps)

This round makes the open V-shaped lattice between the two fan rows.

Round 14 (upper leaf fans): Ch 1, sc in same st as join, [Leaf Fan in next sc, sc in next dc] 13 times, Leaf Fan in last sc. Join to first sc. Skip all ch-2 sps. (84 sts: 14 sc + 70 dc)

Each upper fan sits directly above a lower fan, so the leaves stack in columns.

Rim (Border)

Round 15 (arches): Ch 1, sc in first sc, [ch 4, skip 5 dc, sc in next sc] 13 times, ch 4, skip 5 dc. Join to first sc. (70 sts: 14 sc + 14 ch-4 sps)

Round 16 (rim): Ch 1, [sc in next sc, 3 sc in next ch-4 sp] 14 times. Join. (56 sc)

Fasten off and weave in the ends.

Border Gauge and Math

The rim is worked at the same sc gauge as the base: 3 sts per inch, or 12 sts per 4 in (10.2 cm). Round 16 has 56 sts, matching Rounds 7 and 8 stitch for stitch. Measured from the base markers, that’s 7 sts above each long side and 21 sts around each curved end (7 + 21 + 7 + 21 = 56).

Here’s why the math works. The lace rounds hold 84 sts, but each fan repeat still covers the same 4-st footprint from Round 11. Round 15 bridges each fan with a ch-4, and Round 16 puts 4 sc into each repeat (1 sc + 3 sc). That brings the count back to exactly 14 x 4 = 56. The rim circumference, about 18.7 in (47.5 cm), equals the base edge, so the walls stand straight instead of flaring. The ch-4 arches stay as small cream openings above each upper fan.

Strap (Make 2)

With Color A, ch 76.

Row 1: Sc in the back bump of 2nd ch from hook and each ch across. (75 sc)

Row 2: Ch 1, turn, sl st loosely in blo of each st across. (75 sl sts)

Fasten off and leave a 40 in (101.6 cm) tail for sewing. The strap measures 25 in x 0.5 in (63.5 x 1.3 cm). The sl st row rolls slightly, which gives the strap its corded, braided look.

Counting from the starting end, mark each strap after sts 12, 20, 32, 40, and 52.

Make All Pieces

  • Baskets: 3 (Color A for Rounds 1–10, Color B for Rounds 11–16)
  • Straps: 2 (Color A)

Layout (front view):

          /\
         /  \
   Strap A    Strap B
   |  [Basket 3]  |   strap sts 41–52
   |              |   gap: sts 33–40
   |  [Basket 2]  |   strap sts 21–32
   |              |   gap: sts 13–20
   |  [Basket 1]  |   strap sts 1–12

Joining

Method: Whipstitch with Color A through both loops of the strap and the outer layer of the basket wall.

Stitch-to-stitch logic: The strap runs vertically up the center of each curved end, at the Round 7 marker. Each wall is 4 in (10.2 cm) tall, and 12 strap sts also measure 4 in (10.2 cm), so each basket gets exactly 12 strap sts.

  1. Pin strap st 1 of Strap A to the base edge (Round 8) of Basket 1, centered on the end marker. Pin strap st 12 to the top of Round 16.
  2. Whipstitch strap sts 1–12 to the wall, one whipstitch per strap stitch, spread evenly across Rounds 8–16.
  3. Leave strap sts 13–20 free. That’s an 8-st gap of 2.67 in (6.8 cm).
  4. Sew strap sts 21–32 to Basket 2 the same way.
  5. Leave sts 33–40 free.
  6. Sew sts 41–52 to Basket 3.
  7. Repeat Steps 1–6 with Strap B on the opposite curved end. Check that each basket sits level.

Top point: Strap sts 53–72 (20 sts, 6.67 in / 16.9 cm) stay free and angle inward. Overlap sts 73–75 (1 in / 2.5 cm) of both straps flat and sew them together securely around all edges and once through the center. This makes the peak that hangs on the peg.

Tension: Pull each whipstitch snug but not tight, because tight stitches pucker the wall and tilt the basket. Sew through the outer wall only, not all the way through, so the seam doesn’t show inside.

Size checkpoint: The sewn and gap sections use 52 sts, which measure 17.33 in (44.0 cm). The slanted strap ends rise about 5.75 in (14.6 cm) above the top basket. Total hanging length is about 23 in (58.4 cm).

Final Blocking

  1. Weave in every end along stitches of the same color.
  2. Mist each basket until it’s lightly damp, not soaked.
  3. Stuff each basket firmly with a towel so the walls stand straight.
  4. Gently spread each Leaf Fan with your fingers so the dc stitches open evenly.
  5. Lay the holder on a towel and pin the straps flat and straight, with the baskets still stuffed.
  6. Let it dry completely, at least 24 hours.
  7. Remove the stuffing and hang the holder.

Final Quality-Control Checklist

  • Each base measures 6.75 in x 4.5 in (17.1 x 11.4 cm) and lies flat.
  • Round 16 of every basket has 56 sts.
  • Each lace band shows 14 lower and 14 upper fans, stacked in columns.
  • Walls stand straight at 4 in (10.2 cm).
  • Straps sit centered on each curved end.
  • Both gaps measure 2.67 in (6.8 cm).
  • Baskets hang level without tipping forward.
  • The top point is sewn through both layers.
  • All ends are hidden.

Troubleshooting

Base ruffles: You have extra sts. Recount Rounds 1–7 against the totals.

Base cups before Round 8: Your tension is too tight. Go up half a hook size.

Walls flare: Your post stitches are too loose. Rework Rounds 9–10 more firmly.

Fans don’t line up: Each sc in Round 13 must go into the 3rd dc of a fan.

Rim ripples: You put more than 3 sc into a ch-4 sp. Round 16 should total 56.

Basket tilts: The strap is off-center. Remove the seam and re-pin it on the Round 7 marker.

Straps twist: Pin them flat during blocking.

Care

Hand wash in cool water with mild soap, press the water out in a towel, and reshape to dry flat. Don’t tumble dry, because heat can shrink cotton and distort the lace.

Teal crocheted hanging basket organizer with three cream-trimmed pockets holding white paper rolls, styled on a wall with trailing vines.

Final Notes

The measurement chain is short. A gauge of 12 sc = 4 in (10.2 cm) gives a 56-st base of 6.75 in x 4.5 in (17.1 x 11.4 cm). Those 56 sts carry unchanged through the walls and rim, which reach 4 in (10.2 cm). Three baskets at 12 strap sts each, plus two 8-st gaps, use 52 sts of each strap. The free strap ends form the peak, for a hanging length of about 23 in (58.4 cm). Check your first basket against every checkpoint, and the other two will match.

Happy crocheting!

Leave a Comment