Evergreen Sprig Lace Curtain Panel Crochet Pattern

The Evergreen Sprig curtain panel is an airy grid of forest-green arches. Each cell holds a pair of cream lacy leaves. A small green sprig sits on top of every arch, and each sprig anchors the leaf pair in the cell above, so the whole panel reads as rows of tiny seedlings climbing toward the light.

The palette is two colors: deep green for the grid and a soft cream for the leaves. The look is cottage-style and works well for winter and the holidays without being loud. It is a good choice for a window where you want light and privacy at the same time.

This pattern uses US crochet terms. One finished panel measures 25 in wide x 81.25 in long (63.5 cm x 206.4 cm) after the border. The curtains in the photo are a pair, so make two identical panels.

You make 256 small leaf-pair motifs per panel. The green grid is then worked in rows from the bottom up, and the leaves are joined in as you go: each leaf’s base ring is caught by a stem or sprig, and the leaf tips are caught by the arch above. A two-round border finishes the panel.

Finished Size and Construction

  • Finished size (one panel): 25 in x 81.25 in (63.5 cm x 206.4 cm)
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4), cotton or cotton blend
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 2 panels for a pair; each panel = 1 green grid + 256 cream leaf-pair motifs joined as you go
  • Layout: 8 cells across x 32 tiers tall
  • Cell size: 3 in wide x 2.5 in tall (7.6 cm x 6.4 cm)
  • Size before border: 24 in x 80.25 in (61.0 cm x 203.8 cm)
  • Border depth: 0.5 in (1.3 cm) on each side

Materials

Choose a smooth, mercerized or matte cotton that blocks well. It gives crisp arches and helps the leaves lie flat. Acrylic is lighter in weight but drapes less evenly. The amounts below assume about 180 m per 100 g.

Per panel:
– Green (grid and border): 250 g / 450 m
– Cream (leaf motifs): 375 g / 675 m

For the pair: green 500 g / 900 m, cream 750 g / 1,350 m.

These quantities include a margin of about 10–15% for swatching and weaving in ends.

Tools:
– 5.0 mm (H-8) hook
– Tapestry needle
– Locking stitch markers
– Measuring tape
– Blocking mats and rust-proof pins (or a clean carpet and towels)
– Spray bottle
– 9 curtain clip rings per panel (18 for the pair)

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • RS – right side

Special stitches:

  • Quadruple treble (qtr): Yo 5 times, insert hook in st, yo, pull up a loop (7 loops on hook), [yo, pull through 2 loops] 6 times.
  • Join to tip: Remove the hook from the working loop. Insert the hook from front to back through the ch-2 tip sp of a leaf, pick up the dropped loop and pull it through. The join adds no stitch.
  • Stem with join (StJ): Sc in indicated st, ch 3, sl st through the base ring of the next leaf motif, sl st in each of the 3 ch back down. Counts as 1 sc.
  • Sprig with join (SpJ): Sc in indicated st, ch 3 (stem), [ch 3, sl st in 3rd ch from hook] (left loop), sl st through the base ring of the next leaf motif (center), [ch 3, sl st in 3rd ch from hook] (right loop), sl st in each of the 3 stem ch back down. Counts as 1 sc.
  • Top sprig (SpT): Same as SpJ, but work a third [ch 3, sl st in 3rd ch from hook] loop in place of the leaf join. Counts as 1 sc.

Gauge and Checkpoints

Gauge: 4 sc = 1 in (2.5 cm). One 12-st cell = 3 in (7.6 cm). One tier (qtr row + sc row) = 2.5 in (6.4 cm). One leaf-pair motif = about 2.5 in wide x 1.75 in tall (6.4 cm x 4.4 cm).

Test piece first. Make 4 leaf motifs. Then work the grid on a 25-st base: ch 26, followed by Row 1, then 2 tiers (Rows 2–5). That is 2 cells wide.

The swatch should measure 6 in wide x 5.25 in tall (15.2 cm x 13.3 cm). Check these points:

  • Leaf checkpoint: each motif is about 2.5 in (6.4 cm) across the spread leaves.
  • Row 1 checkpoint: 25 sc = 6 in (15.2 cm).
  • Tier checkpoint: each tier = 2.5 in (6.4 cm).

Too big? Go down a half size to a 4.5 mm hook. Too small? Go up to a 5.5 mm hook. If only the tier height is off, adjust how far you pull up the first loop of each qtr rather than changing hooks. If the leaves crowd the cell, tighten your cream tension slightly.

Step-by-step crochet tutorial displaying green and cream yarn with progressive leaf-motif stages leading to finished patterned curtains.

Leaf-Pair Motif (Make 256 per panel)

Use cream. Each motif has two leaves joined at a shared base, with a small chain ring hanging below.

Leaf 1
1. Make a slip knot, ch 3, sl st in 1st ch to form the tip ring.
2. Ch 8. This is the spine.
3. Ch 6, sl st in last spine ch (the one nearest the hook before these 6) to form the base ring.
4. Side A (work back along the spine toward the tip): sc in next ch, hdc in next ch, dc in next ch, ch 1, sk 1 ch, dc in next ch, hdc in next ch, sc in last ch.
5. Tip: (sc, ch 2, sc) in tip ring.
6. Side B (work in the unused loops of the spine toward the base): sc, hdc, dc, ch 1, sk 1, dc, hdc, sc. Sl st in the base-ring join.

Leaf 1 count: 14 sts, 2 ch-1 sps, 1 ch-2 tip sp.

Leaf 2
1. Ch 8 (spine), ch 3, sl st in 3rd ch from hook to form the tip ring.
2. (Sc, ch 2) in tip ring.
3. Side A (work down the spine): sc, hdc, dc, ch 1, sk 1, dc, hdc, sc, sl st in last ch.
4. Sl st in the base-ring join.
5. Side B (work in the unused loops toward the tip): sc, hdc, dc, ch 1, sk 1, dc, hdc, sc.
6. Sc in tip ring, sl st in first sc. Fasten off.

Leaf 2 count: 14 sts, 2 ch-1 sps, 1 ch-2 tip sp.

Spread the two leaves into a V with the base ring centered below them. The ch-1 spaces create the lacy vein line. Weave in both ends now; the tails sit at the tips, where the arch joins will cover them.

Make All Pieces

Per panel: 256 cream leaf-pair motifs (8 per tier x 32 tiers). Pair: 512.

Store the motifs in bags of 8, one bag per tier. Layout of one panel (L = leaf cell, | = green post):

Top border + 9 posts + 8 top sprigs
| L | L | L | L | L | L | L | L |   Tier 32
| L | L | L | L | L | L | L | L |   Tier 31
            ... (repeat) ...
| L | L | L | L | L | L | L | L |   Tier 2
| L | L | L | L | L | L | L | L |   Tier 1
=================================   Row 1 base (97 sc)

Green Grid (Join-As-You-Go)

Use green. Odd rows are RS, and all stems and sprigs sit on the RS.

Foundation: Ch 98.

Row 1 (RS, base row): Sc in 2nd ch from hook, sc in next 5 ch. StJ in next ch, sc in next 11 ch 7 times. StJ in next ch, sc in last 6 ch. Turn.
Count: 97 sc. The stems are on sts 7, 19, 31, 43, 55, 67, 79 and 91.

Row 2 (post row): Ch 6 (counts as qtr). Ch 3, join to the nearest leaf tip, ch 5, join to the other tip of the same motif, ch 3, sk 11 sc, qtr in next sc. Repeat 8 times. Turn.
Count: 9 qtr + 8 ch-11 arches = 97 sts (1 + 8 x 12).

Row 3 (RS, arch row): Ch 1, sc in first qtr. Sc in next 5 ch, SpJ in next ch (center ch, catching a new leaf motif), sc in next 5 ch, sc in next qtr (top of the ch-6 on the last repeat). Repeat 8 times. Turn.
Count: 97 sts (1 + 8 x 12).

Rows 4–63: Repeat Rows 2–3 thirty times. This completes tiers 2–31. Row 63 catches the leaves for tier 32.

Row 64: Repeat Row 2.

Row 65 (RS, top row): Work as Row 3, but use SpT instead of SpJ. Count: 97 sts. Do not fasten off.

Height checkpoints: After 10 tiers, the panel measures 25.25 in (64.1 cm). After 20 tiers, it measures 50.25 in (127.6 cm). After 32 tiers, it measures 80.25 in (203.8 cm). Measure on a flat surface without stretching.

Joining

The leaves are joined while the grid is worked, so there is no sewing.

  • Base ring: One join per motif, made with the StJ (Row 1) or SpJ (Rows 3–63) on the center stitch of each cell. Stitches 2–12 of every cell are the 11 skipped stitches under the arch, and the center one, stitch 7, takes the join.
  • Leaf tips: Two joins per motif, made in the post row. Each join comes after 3 ch from a post, so the tips sit symmetrically under the arch. The 5 ch between the tips span the top of the V.
  • Stitch logic: Joins add no stitches, so every row stays at 97.
  • Tension: Keep the arch chains firm but not tight. If a leaf buckles, your ch-11 is too short; if it hangs loose, the chains are too long.
  • Width checkpoint: After Row 3, the panel measures 24 in (61.0 cm) across. The one extra edge stitch is absorbed into the outer posts.

Border

Border gauge: 4 sc = 1 in (2.5 cm) along the edges. 2 rounds = 0.5 in (1.3 cm).

Rnd 1 (RS): Ch 1. Work 3 sc in the first st of Row 65 (corner).
– Top: Sc in the next 95 sts, leaving the sprigs standing above the edge. 3 sc in the last st (corner).
– Side: Work 9 sc around each qtr post and 1 sc in the end of each sc row (Rows 63 down to Row 3). That is 32 x 9 + 31 x 1 = 319 sc.
– Bottom: 3 sc in the end st of Row 1 (corner). Sc in the 95 unused foundation loops. 3 sc in the last st (corner).
– Second side: 319 sc to match the first side. Join with sl st to the first sc.

Count: 968 sc. The total is 2 x 95 + 2 x 319 + 4 x 3.

Rnd 2: Ch 1. Sc in each st and 3 sc in each corner center st. Join.
Count: 976 sc. The top and bottom now have 97 sts between corner centers, and the sides have 321.

Why the math works: Each tier is 2.5 in (6.4 cm) tall. At 4 sc per inch, a tier needs 10 sc (9 on the post + 1 on the row end). The 95 top and bottom stitches are the same 1-per-stitch count as the 97-st rows minus the 2 corner stitches. As a result, the border lies flat without ruffling or cupping. Fasten off and weave in ends.

Final Blocking

  1. Soak the panel in cool water for 15 minutes, then gently press out the water. Do not wring.
  2. Roll it in towels to remove more water.
  3. Lay it flat and pin it to 25 in x 81.25 in (63.5 cm x 206.4 cm).
  4. Pin each post straight and every 5 tiers check that the posts line up vertically.
  5. Shape each leaf pair into an even V with the base ring centered on its sprig.
  6. Ease each arch into a soft curve with the sprig standing upright.
  7. Mist again if needed and let it dry completely, usually 24–48 hours.

Final Quality-Control Checklist

  • Every row has 97 sts.
  • There are 9 posts per post row and 32 tiers in all.
  • All 256 leaf motifs are joined at 3 points: the base ring and both tips.
  • Each of the 8 top sprigs has 3 loops.
  • Border Rnd 1 has 968 sts and Rnd 2 has 976 sts.
  • The panel measures 25 in x 81.25 in (63.5 cm x 206.4 cm).
  • Both panels match within 0.5 in (1.3 cm).

Troubleshooting

  • Panel narrows toward the top: The qtr stitches are leaning. Recount to 11 skipped sts per cell.
  • Tiers are too short: Pull up the first loop of each qtr taller, or loosen your yo wraps.
  • Leaves twist: Join both tips from the RS, front to back, every time.
  • Border ruffles: Use 8 sc per post instead of 9 and recount the side total.
  • Border pulls in: Use 10 sc per post and recount the side total.
  • Sprigs flop: Work the stem ch tighter and pin the sprigs upright during blocking.

Care

Hand wash in cool water with mild soap and dry flat. Re-pin to the finished size if needed. Do not hang the panel while it is wet, because the weight will stretch it.

Pair of green-and-cream leaf-patterned curtains frame a bright window in a holiday-decorated living room with Christmas tree and garland.

Final Notes

The measurement chain is simple:
– 4 sc = 1 in (2.5 cm).
– One 12-st cell = 3 in (7.6 cm), and 8 cells = 24 in (61.0 cm).
– One tier = 2.5 in (6.4 cm), and 32 tiers plus the base row = 80.25 in (203.8 cm).
– The 0.5 in (1.3 cm) border brings the panel to 25 in x 81.25 in (63.5 cm x 206.4 cm).

Check your gauge at each stage and every panel will hang straight and match. Make two panels for the pair, clip a ring at each of the 9 post tops, and hang.

Happy crocheting!

Leave a Comment