Iced Cookie Gingerbread Man Ornament Crochet Pattern

This little gingerbread man looks like a fresh-baked cookie. The caramel-brown body is worked in firm single crochet, wavy off-white “icing” runs across the head, hands, feet and hem, and a red bow and three green buttons add the classic sweet-shop details.

The palette is simple: caramel brown for the cookie, off-white for icing and the smile, red for the bow, green for the buttons, and a little black for the eyes. The ornament lies completely flat, so it works on the tree, on a gift package, or on a garland hook.

This pattern uses US crochet terms. The finished ornament is about 5 in (12.7 cm) wide and 7 in (17.8 cm) tall, not counting the 2.5 in (6.4 cm) hanging loop.

You’ll make six pieces: a round head, a trapezoid body, two arms and two legs. Then you whipstitch them together edge to edge, sew on the icing cords and appliqués, embroider the face, and add the loop.

Finished Size and Construction

  • Finished size: about 5 in (12.7 cm) wide x 7 in (17.8 cm) tall
  • Skill level: Advanced beginner
  • Terminology: US
  • Yarn weight: DK / light (#3) cotton or cotton blend
  • Hook: 3.5 mm (US E-4)
  • Number of main pieces: 6 (1 head, 1 body, 2 arms, 2 legs)
  • Layout: the head sits above the body, an arm on each upper side of the body, and both legs below the body
  • Piece sizes: head 2.5 in (6.4 cm) across; body 1.8 in (4.6 cm) at the top, 3.4 in (8.6 cm) at the hem and 2.6 in (6.6 cm) tall; arms 1.6 x 1.0 in (4.1 x 2.5 cm); legs 1.9 x 1.1 in (4.8 x 2.8 cm)
  • Body size before the edging round: 3.0 in (7.6 cm) at the hem x 2.2 in (5.6 cm) tall
  • Border depth: there is no separate border. The body’s edging round adds about 0.2 in (0.5 cm) on each edge, and the icing cords sit on the surface.

Materials

Choose a smooth, tightly plied cotton so the stitches show clearly and the edges stay crisp. Acrylic DK also works, but cotton blocks flatter.

  • Caramel brown: 15 g / 35 m
  • Off-white: 3 g / 7 m
  • Red: 2 g / 5 m
  • Green: 1 g / 2 m
  • Black: 1 m, for the eyes

These quantities include a small safety margin.

Tools:
– 3.5 mm (US E-4) hook
– Tapestry needle
– Scissors
– Rust-proof pins
– Stitch marker
– Spray bottle and a foam blocking mat
– Optional: brown felt to back the ornament

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • inc – 2 sc in the same stitch
  • sc2tog – single crochet 2 together: insert the hook in the next st, yarn over and pull up a loop, insert the hook in the following st, yarn over and pull up a loop, then yarn over and draw through all 3 loops
  • MR – magic ring
  • st(s) – stitch(es)

Special stitch – whipstitch: lay two edges side by side, right sides up. Pass the needle up through the outer loop of one edge, then down through the outer loop of the matching stitch on the other edge. Repeat 1 stitch to 1 stitch.

Gauge and Checkpoints

Gauge: 20 sc x 22 rows = 4 in (10.2 cm). That works out to 5 sts and 5.5 rows per inch.

Chain gauge (for the cords): 6 ch = 1 in (2.5 cm).

Make the head first and treat it as your test piece. It’s the quickest way to check your tension.

Head checkpoints:
– After Round 3: 1.1 in (2.8 cm) across
– After Round 5: 1.8 in (4.6 cm) across
– After Round 7: 2.5 in (6.4 cm) across

Body checkpoints:
– After Row 12: 3.0 in (7.6 cm) wide at the hem and 2.2 in (5.6 cm) tall
– After the edging round: 3.4 in (8.6 cm) wide at the hem and 2.6 in (6.6 cm) tall

If your piece is too big: go down to a 3.25 mm hook. If it’s too small: go up to a 3.75 mm hook. A difference of 0.2 in (0.5 cm) on the head is fine. Anything larger will change the proportions of the whole cookie.

Tan crocheted plush character with black button eyes and cream embroidered smile, photographed against a wooden background.

Head (make 1, caramel brown)

Join every round with a sl st to the first sc. Ch 1 at the start of each round does not count as a stitch.

  • Round 1: MR, 6 sc in the ring, join. (6)
  • Round 2: inc in each st around, join. (12)
  • Round 3: [sc 1, inc] 6 times, join. (18)
  • Round 4: [sc 2, inc] 6 times, join. (24)
  • Round 5: [sc 3, inc] 6 times, join. (30)
  • Round 6: [sc 4, inc] 6 times, join. (36)
  • Round 7: [sc 5, inc] 6 times, join. (42)

Fasten off and leave a 12 in (30.5 cm) tail for joining. Round 7 is the visible rolled rim of the head. The head should lie flat. If it cups, your increases are too tight. If it ripples, your tension is too loose.

Body (make 1, caramel brown)

The body is worked in rows from the hem up. Decreases on both sides create the trapezoid. Ch 1 at the start of each row does not count as a stitch.

  • Foundation: ch 16.
  • Row 1: sc in the 2nd ch from the hook and in each ch across. (15)
  • Row 2: ch 1, turn, sc across. (15)
  • Row 3: ch 1, turn, sc2tog, sc 11, sc2tog. (13)
  • Rows 4–5: ch 1, turn, sc across. (13)
  • Row 6: ch 1, turn, sc2tog, sc 9, sc2tog. (11)
  • Rows 7–8: ch 1, turn, sc across. (11)
  • Row 9: ch 1, turn, sc2tog, sc 7, sc2tog. (9)
  • Rows 10–11: ch 1, turn, sc across. (9)
  • Row 12: ch 1, turn, sc2tog, sc 5, sc2tog. (7)

Checkpoint: 3.0 in (7.6 cm) wide at the hem, 2.2 in (5.6 cm) tall.

Round 13 (edging round, conversion): ch 1, don’t turn. Work around the whole trapezoid.

  • Top edge: 2 sc in the first st, sc 5, 2 sc in the last st. That’s 7 sts worked + 2 added = 9.
  • First side: 1 sc in each row end down the side = 12.
  • Hem: working into the free loops of the foundation chain, 2 sc in the first loop, sc 13, 2 sc in the last loop. That’s 15 sts worked + 2 added = 17.
  • Second side: 1 sc in each row end up the side = 12.
  • Join with a sl st to the first sc.

Total: 9 + 12 + 17 + 12 = 50 sts. The 2 sc worked into each corner stitch are already counted in the top and hem totals.

Fasten off and weave in the ends. Checkpoint: 1.8 in (4.6 cm) at the top, 3.4 in (8.6 cm) at the hem, 2.6 in (6.6 cm) tall.

Arms (make 2, caramel brown)

Each arm is a small oval worked around both sides of a foundation chain. Join every round with a sl st.

  • Foundation: ch 5.
  • Round 1: sc in the 2nd ch from the hook, sc 2, 3 sc in the last ch. Rotate and work along the other side of the chain: sc 2, then 2 sc in the same ch as the first sc. Join. (10)
  • Round 2: ch 1, inc, sc 2, inc in each of the next 3 sts, sc 2, inc in each of the last 2 sts. Join. (16)
  • Round 3: ch 1, sc 1, inc, sc 2, [sc 1, inc] 3 times, sc 2, [sc 1, inc] 2 times. Join. (22)

Each rounded end now has 9 sts and each straight side has 2 sts. Checkpoints: about 1.3 x 0.7 in (3.3 x 1.8 cm) after Round 2, and 1.6 x 1.0 in (4.1 x 2.5 cm) after Round 3. Fasten off and leave a 10 in (25.4 cm) tail.

Legs (make 2, caramel brown)

  • Foundation: ch 6.
  • Round 1: sc in the 2nd ch from the hook, sc 3, 3 sc in the last ch. Along the other side: sc 3, then 2 sc in the same ch as the first sc. Join. (12)
  • Round 2: ch 1, inc, sc 3, inc in each of the next 3 sts, sc 3, inc in each of the last 2 sts. Join. (18)
  • Round 3: ch 1, sc 1, inc, sc 3, [sc 1, inc] 3 times, sc 3, [sc 1, inc] 2 times. Join. (24)

Each rounded end has 9 sts and each straight side has 3 sts. Checkpoints: about 1.5 x 0.7 in (3.8 x 1.8 cm) after Round 2, and 1.9 x 1.1 in (4.8 x 2.8 cm) after Round 3. Fasten off and leave a 10 in (25.4 cm) tail.

Small Appliqués

Bow (make 1, red): ch 9. Row 1: sc in the 2nd ch from the hook and across (8). Rows 2–4: ch 1, turn, sc across (8). Fasten off and leave a 12 in (30.5 cm) tail. Wrap the tail tightly around the center 6 times to pinch it into a bow, then secure it on the back. The finished bow is about 1.6 x 0.7 in (4.1 x 1.8 cm).

Buttons (make 3, green): MR, 6 sc in the ring, join, pull the ring closed. Fasten off and leave an 8 in (20.3 cm) tail. Each button is about 0.4 in (1.0 cm) across.

Hanging loop (make 1, caramel brown): ch 31. Sl st in the 2nd ch from the hook and in each ch across (30). This makes a 5 in (12.7 cm) cord.

Make All Pieces

Before you join anything, check that you have:

  • Caramel brown: 1 head, 1 body, 2 arms, 2 legs, 1 loop cord
  • Red: 1 bow
  • Green: 3 buttons
  • Off-white: 6 icing cords (see Border)

Lay the pieces out like this:

            [ HEAD ]
[ ARM ] [    BODY    ] [ ARM ]
          [LEG]   [LEG]

Joining

Use the leftover caramel-brown tails. Whipstitch the pieces edge to edge with right sides up, working 1 stitch to 1 stitch through the outer loops.

  1. Head to body: find the center 5 sts at the bottom of the head’s Round 7. Whipstitch them to the center 5 of the 9 top-edge sts of the body (sts 3–7). That’s 5 sts joined to 5 sts.
  2. Arms to body: take the center 3 sts at the tip of one arm end (out of that end’s 9 sts). Whipstitch them to the body’s side edging sts 2–4, counting down from the top corner. Repeat on the other side. That’s 3 sts joined to 3 sts on each side, and both arms angle slightly downward.
  3. Legs to body: take the center 4 sts at the tip of one leg end. Whipstitch them to hem sts 3–6, counting from the left corner of the 17 hem sts. Join the second leg to hem sts 12–15. This leaves 5 hem sts (7–11) free between the legs.

Tension: pull each stitch snug enough to close the gap but not so tight that the seam puckers. The pieces should still lie flat.

Size checkpoint: 2.5 + 2.6 + 1.9 = 7.0 in (17.8 cm) tall, and about 5 in (12.7 cm) from hand to hand.

Border: Icing Trim

There’s no stitched border around the outside of the ornament. The finishing “border” is the off-white icing cords sewn onto the surface. Each cord is a plain chain.

Border gauge: 6 ch = 1 in (2.5 cm). Every cord is 1.5 times the straight distance it covers, so it can curve into a gentle wave.

  • Head: ch 22, about 3.7 in (9.4 cm). It covers a 2.4 in (6.1 cm) arc over Round 6, curving across the top of the head.
  • Body hem: ch 31, about 5.2 in (13.2 cm). It covers 3.4 in (8.6 cm) along the hem, just inside the edging round.
  • Each arm: ch 9, about 1.5 in (3.8 cm). It covers 1.0 in (2.5 cm) across the outer end of the arm.
  • Each leg: ch 10, about 1.7 in (4.3 cm). It covers 1.1 in (2.8 cm) across the bottom end of the leg.

Pin each cord into evenly spaced waves. Aim for about 3 crests per inch on the hem and 2–3 crests on the shorter pieces. Tack the cord down at every crest and every trough with matching thread or a split ply of off-white yarn.

Why the math works: a wave uses about 1.5 times the straight length it covers. For the hem, 3.4 in x 1.5 = 5.1 in, and 31 ch at 6 per inch is 5.2 in. The other cords follow the same ratio, so the waves are the same depth on every piece.

Face and finishing:
– Eyes: two black French knots on Round 4 of the head, 5 sts apart.
– Smile: chain-stitch a 6-stitch curve in off-white, below the eyes and along Round 3.
– Bow: sew it centered over the head-to-body seam.
– Buttons: sew them down the center of the body, spaced 0.5 in (1.3 cm) apart, starting 0.5 in (1.3 cm) below the bow.
– Loop: fold the cord in half and sew both ends to the back of the head at the top center, so the loop stands 2.5 in (6.4 cm) high.

Final Blocking

  1. Weave in all the ends on the back, inside stitches of the same color.
  2. Lay the ornament face down on a blocking mat.
  3. Pin it to 7 in (17.8 cm) tall and 5 in (12.7 cm) wide. Keep the head round and the arms angled evenly.
  4. Mist it lightly with water until it’s damp but not soaked.
  5. Gently press the seams flat with your fingers.
  6. Let it dry completely, which takes about 6 hours.
  7. Optional: cut a felt backing slightly smaller than the outline and glue or stitch it on.

Final Quality-Control Checklist

  • Head 2.5 in (6.4 cm) across with 42 sts in Round 7
  • Body edging round has 50 sts (9 / 12 / 17 / 12)
  • Arms have 22 sts and legs have 24 sts in Round 3
  • Both arms are joined at the same height, and both legs are spaced evenly
  • Icing waves are evenly spaced and tacked down at every crest
  • Eyes are level and the smile is centered
  • Loop is secure and centered at the top
  • Finished size is about 5 x 7 in (12.7 x 17.8 cm)

Troubleshooting

  • Head cups: your increases are too tight. Go up a hook size, or relax your tension in the later rounds.
  • Head ripples: your stitches are too loose, or you added extra increases. Recount each round.
  • Body leans to one side: you missed a decrease. Every decrease row should drop by exactly 2 sts.
  • Oval ends look pointed: make sure you worked 3 sc in the last ch of Round 1.
  • Seams gap: you skipped stitches while joining. Match 1 stitch to 1 stitch.
  • Icing looks flat: your chain is too short. Add 1–2 ch so the waves have room.
  • Ornament curls: block it again and pin the edges flat.

Care

Spot clean with cool water and mild soap, then lay flat to dry. Store the ornament flat so the loop and icing keep their shape.

Crocheted tan gingerbread ornaments with white frosting trim and red bows on rustic wood against evergreen and warm holiday lights.

Final Notes

Here’s the full measurement chain:

  • Gauge of 5 sts and 5.5 rows per inch gives a 2.5 in (6.4 cm) head and a 1.8 x 3.4 x 2.6 in (4.6 x 8.6 x 6.6 cm) body.
  • Ovals: 1.6 in (4.1 cm) arms and 1.9 in (4.8 cm) legs.
  • Joined size: about 5 x 7 in (12.7 x 17.8 cm).
  • Icing cords follow the 1.5x wave rule at 6 ch per inch.

Check your gauge on the head first, and every other piece will fit around it.

Happy crocheting!

Leave a Comment