This lace butterfly is a light, airy ornament made in cotton thread. It has four open fan-shaped wings in warm ivory and a small, ridged body in pale butter yellow. Two beaded antennae and a slim chain hanging loop finish it off. It looks lovely on a Christmas tree, in a window, or tied to a gift.
The wings get their stained-glass look from radiating spokes, a row of arched chain windows, and a beaded picot edge. The body is worked in the round like a tiny amigurumi. Back-loop rounds form neat raised segments down the abdomen.
The pattern uses US crochet terms. The finished butterfly measures 5.5 in (14.0 cm) across the wings and 4 in (10.2 cm) from the top wing edge to the bottom wing tip. It is about 6 in (15.2 cm) tall from the top of the hanging loop to the lowest wing point.
You will make eight small pieces: one body, two antennae, two upper wings, two lower wings, and one hanging loop. The wings are worked flat as half-circle fans from a small ring. You sew everything together, then work a picot border along the outer curve of each wing. A light starch blocking sets the shape.
Finished Size and Construction
- Finished size: 5.5 in (14.0 cm) wide x 4 in (10.2 cm) tall across the wings; about 6 in (15.2 cm) tall including the loop
- Skill level: Intermediate (thread work, small pieces, sewing)
- Terminology: US crochet terms
- Yarn weight: Size 3 mercerized cotton crochet thread (Lace, weight 0)
- Hook: 2.25 mm (B-1)
- Number of pieces: 8 (1 body, 2 antennae, 2 upper wings, 2 lower wings, 1 hanging loop)
- Layout: Body down the center; one upper and one lower wing on each side; antennae and loop at the head
- Piece sizes: Upper wing 2.5 in (6.4 cm) radius; lower wing 2 in (5.1 cm) long; body 3 in (7.6 cm) long x 0.5 in (1.3 cm) wide
- Size before border: 5.1 in (13.0 cm) wide x 3.6 in (9.1 cm) tall
- Border depth: 0.2 in (0.5 cm) on each wing edge
Materials
Choose a mercerized cotton thread. It holds crisp lace shapes, takes starch well, and has a soft sheen. Avoid fuzzy or very stretchy fibers, which blur the open windows.
- Ivory (cream): 12 g, about 33 m (wings, border, hanging loop)
- Pale butter yellow: 5 g, about 14 m (body, antennae)
These amounts include a margin of about 20 percent for a gauge test and sewing tails.
Tools:
- 2.25 mm (B-1) crochet hook
- Fine tapestry needle
- Stitch marker
- A small pinch of fiberfill or matching thread scraps
- Scissors
- Blocking board or foam mat and rustproof pins
- Spray starch or a fabric stiffener
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- inc – 2 sc in the same stitch
- dec – single crochet 2 together
- BLO – back loop only
- MR – magic ring
- sp(s) – space(s)
- st(s) – stitch(es)
Special stitches:
- Picot: Ch 3, sl st in the 3rd ch from hook.
- 4-dc bobble: [Yarn over, insert hook in st, pull up a loop, yarn over, pull through 2 loops] 4 times in the same st, yarn over, pull through all 5 loops on hook.
Gauge and Checkpoints
Make one upper wing first. It is the largest piece and shows you quickly whether your tension matches.
- Body gauge: 9 sc and 9 rounds = 1 in (2.5 cm) in continuous rounds.
- Upper wing, after Row 4: 1.7 in (4.3 cm) from the center of the ring to the top of the middle tr.
- Upper wing, after Row 6: 2.3 in (5.8 cm) radius.
- Lower wing, after Row 3: 1.3 in (3.3 cm) from ring to tip.
- Lower wing, after Row 5: 1.8 in (4.6 cm) long.
- Body, after Rnd 9: 1 in (2.5 cm) long.
If your upper wing is more than 0.2 in (0.5 cm) too large after Row 4, change to a 2.0 mm hook. If it is more than 0.2 in (0.5 cm) too small, try a 2.5 mm hook. Measure the lace gently flattened but not stretched, because starching opens it up a little.

Pattern
Upper Wing (make 2, ivory)
Leave an 8 in (20.3 cm) starting tail for sewing.
Ch 4, sl st in first ch to form a ring.
Row 1: Ch 3 (counts as dc), 8 dc in ring. Turn. (9 dc, forming a half circle)
Row 2: Ch 5 (counts as dc + ch 2), skip first dc, dc in next dc, ch 2, dc in next dc 7 times, working the last dc in the top of the turning ch. Turn. (9 dc, 8 ch-2 sps)
Row 3: Ch 6 (counts as dc + ch 3), skip first dc, dc in next dc, ch 3, dc in next dc 7 times, working the last dc in the 3rd ch of the turning ch-5. Turn. (9 dc, 8 ch-3 sps)
Row 4: Ch 7 (counts as tr + ch 3), skip first dc, tr in next dc, ch 3, tr in next dc 7 times, working the last tr in the 3rd ch of the turning ch-6. Turn. (9 tr, 8 ch-3 sps)
Rows 2–4 build the long radiating spokes. Checkpoint: 1.7 in (4.3 cm) radius.
Row 5: Ch 1 (does not count), sc in first tr, ch 5, sc in next tr 8 times, working the last sc in the 4th ch of the turning ch-7. Turn. (9 sc, 8 ch-5 loops)
Row 6: Ch 1 (does not count), work (sc, hdc, 5 dc, hdc, sc) in each ch-5 loop across. (8 scallops of 9 sts = 72 sts)
The ch-5 loops become the arched outer windows, and the scallops shape the rounded wing edge. Fasten off. Checkpoint: 2.3 in (5.8 cm) radius.
Lower Wing (make 2, ivory)
Leave an 8 in (20.3 cm) starting tail.
Ch 4, sl st in first ch to form a ring.
Row 1: Ch 3 (counts as dc), 6 dc in ring. Turn. (7 dc)
Row 2: Ch 5 (counts as dc + ch 2), skip first dc, dc in next dc, ch 2, dc in next dc 5 times, working the last dc in the top of the turning ch. Turn. (7 dc, 6 ch-2 sps)
Row 3: Ch 7 (counts as tr + ch 3), skip first dc, tr in next dc, ch 3, tr in next dc 5 times, working the last tr in the 3rd ch of the turning ch-5. Turn. (7 tr, 6 ch-3 sps)
Checkpoint: 1.3 in (3.3 cm).
Row 4: Ch 1 (does not count), sc in first tr, ch 5, sc in next tr 6 times, working the last sc in the 4th ch of the turning ch-7. Turn. (7 sc, 6 ch-5 loops)
Row 5: Ch 1 (does not count), work (sc, hdc, 4 dc, hdc, sc) in each ch-5 loop across. (6 scallops of 8 sts = 48 sts)
Fasten off. Checkpoint: 1.8 in (4.6 cm). Because it has fewer spokes, this fan is narrower, which gives the lower wing its teardrop shape.
Body (make 1, pale yellow)
Work in continuous rounds. Mark the first st of each round.
Rnd 1: 6 sc in MR. (6)
Rnd 2: [Sc in next st, inc] 3 times. (9)
Rnd 3: Sc in each st around. (9)
Rnd 4: [Sc in next st, dec] 3 times. (6) – this forms the neck.
Rnd 5: [Sc in next st, inc] 3 times. (9)
Rnd 6: [Sc in next 2 sts, inc] 3 times. (12)
Rnds 7–9: Sc in each st around. (12)
Checkpoint: 1 in (2.5 cm). Stuff the head and thorax lightly.
On the abdomen, BLO rounds alternate with regular rounds. Each BLO round leaves a front-loop ridge, which makes the segments.
Rnd 10: BLO sc in each st around. (12)
Rnd 11: Sc in each st around. (12)
Rnd 12: BLO sc in each st around. (12)
Rnd 13: Sc in each st around. (12)
Rnd 14: BLO sc in each st around. (12)
Rnd 15: [Sc in next 2 sts, dec] 3 times. (9)
Rnd 16: BLO sc in each st around. (9)
Rnd 17: Sc in each st around. (9)
Rnd 18: BLO sc in each st around. (9)
Rnd 19: Sc in each st around. (9)
Rnd 20: BLO sc in each st around. (9)
Rnd 21: Sc in each st around. (9)
Rnd 22: BLO sc in each st around. (9)
Rnd 23: [Sc in next st, dec] 3 times. (6)
Stuff the abdomen lightly. It should stay slim, not round.
Rnd 24: BLO sc in each st around. (6)
Rnd 25: Sc in each st around. (6)
Rnd 26: Dec 3 times. (3)
Fasten off, weave the tail through the last 3 sts, and pull closed. Checkpoint: 3 in (7.6 cm) long, 0.5 in (1.3 cm) wide at the thorax.
Antenna (make 2, pale yellow)
Ch 18. Work a 4-dc bobble in the 4th ch from hook. The 3 skipped ch fold around the bobble to make the round tip. Sl st in the back bump of each of the remaining 14 ch. (1 bobble + 14 sl st)
Fasten off, leaving a 6 in (15.2 cm) tail. Each stem is about 1.25 in (3.2 cm) long.
Hanging Loop (make 1, ivory)
Ch 48. Sl st in the back bump of the 2nd ch from hook and each ch across. (47 sl st)
Fasten off, leaving a 6 in (15.2 cm) tail. The strip is about 4 in (10.2 cm) long and folds into a 2 in (5.1 cm) loop.
Make All Pieces
- Ivory: 2 upper wings, 2 lower wings, 1 hanging loop (5 pieces)
- Pale yellow: 1 body, 2 antennae (3 pieces)
Layout, right side facing you:
[ LOOP ]
[ANT] [ANT]
[UPPER WING L] [BODY] [UPPER WING R]
[LOWER WING L] [BODY] [LOWER WING R]
[BODY]
Lace looks the same on both sides, so every wing is made the same way. To mirror a pair, flip one wing over before sewing.
Joining
Sew with the starting tails and a tapestry needle. Use small whipstitches through whole stitches, never through split thread.
- Upper wings: Set each upper wing so its ring touches the side of the body. Sew the ring to body Rnds 6–9 (thorax) with 6 to 8 stitches. The top straight edge, running from Row 1 out to Row 6, should angle up toward the head.
- Lower wings: Set each lower wing ring against body Rnds 10–13. Sew it with 5 to 6 stitches, angling the wing down and out.
- Wing overlap: Where an upper wing’s bottom straight edge meets the lower wing’s top straight edge, tack the last Row 5 sc of the upper wing to the first Row 4 sc of the lower wing with 2 small stitches.
- Antennae: Sew the stem ends to the top of the head at Rnd 2, about 3 sts apart, angled in a V.
- Hanging loop: Fold the strip in half and sew both ends to Rnd 1 at the center top of the head, between the antennae.
Tension advice: Pull each stitch just snug. Seams that are too tight dimple the soft body, and loose seams let the wings tilt. Pin the wings in place before sewing so both sides match.
Size checkpoint: The width should now be 2.3 in + 0.5 in + 2.3 in = 5.1 in (13.0 cm). The height across the wings should be 3.6 in (9.1 cm).
Border
The picot border goes only along the scalloped outer curve of each wing. It never touches the body, so you can work it now that the shape is set. You can also work it before joining; the counts stay the same.
Border gauge: One picot every 2 sc, which works out to about 4 picots per 1 in (2.5 cm) of edge.
Upper Wing Border (each)
With the right side facing, join ivory with a sl st in the first sc of Row 6.
Border Row: Ch 1. Repeat sc in next st, [picot, sc in next 2 sts] 4 times 8 times, working the very first sc in the same st as the join. Fasten off.
Count: 72 sc and 32 picots. Each scallop has 9 sts, worked 1 per stitch as 1 sc + (4 x 2 sc) = 9 sc, plus 4 added picots. So 8 scallops x 9 sc = 72 sc, and 8 x 4 = 32 picots.
Lower Wing Border (each)
Join ivory with a sl st in the first sc of Row 5.
Border Row: Ch 1. Repeat sc in next st, [picot, sc in next 2 sts] 3 times, sc in next st 6 times, working the very first sc in the same st as the join. Fasten off.
Count: 48 sc and 18 picots. Each scallop is worked as 1 + (3 x 2) + 1 = 8 sc, plus 3 added picots. So 6 x 8 = 48 sc, and 6 x 3 = 18 picots.
Why the math works: Each scallop stitch gets exactly one sc, so the edge doesn’t ruffle or pull in. The picots sit on top of the sc, centered in each scallop, so the beaded points follow the curve evenly. The border adds 0.2 in (0.5 cm) to each wing. The width becomes 2.5 in + 0.5 in + 2.5 in = 5.5 in (14.0 cm), and the height goes from 3.6 in (9.1 cm) to 4 in (10.2 cm).
Final Blocking
- Weave in all remaining ends through solid stitches, not chain spaces.
- Lay the butterfly right side up on a blocking board.
- Pin the body straight down the center.
- Pin the tip of every spoke and the center of every scallop on each wing, opening the arched windows evenly.
- Check that both upper wings measure 2.5 in (6.4 cm) from ring to edge and both lower wings measure 2 in (5.1 cm) long.
- Spray starch over the wings until damp. Don’t soak the stuffed body.
- Bend the antennae into gentle outward curves and pin them.
- Let it dry completely, at least 6 hours, before unpinning.
Final Quality-Control Checklist
- Wingspan measures 5.5 in (14.0 cm).
- Wing height measures 4 in (10.2 cm).
- Each upper wing has 9 spokes and 8 arched windows.
- Each lower wing has 7 spokes and 6 arched windows.
- The body shows clear ridges and tapers to a point.
- Both antennae are about 1.25 in (3.2 cm) long.
- The loop is centered and the butterfly hangs level.
- No ends show on the front.
Troubleshooting
- Wing cups instead of lying flat: There are too few chains between spokes. Add 1 ch to each space in Rows 2–4, or block harder with extra starch.
- Wing ruffles: The chains are too loose. Go down a hook size or tighten your chains.
- Body ridges disappear: Work the BLO rounds firmly, and check your marker so you don’t skip a round.
- Bobble tip is flat: Pull the bobble’s last loop snug and push the skipped chains around it.
- Butterfly hangs crooked: Move the loop ends one stitch toward the heavier side.
Care
Hand wash in cool water with mild soap, roll in a towel, and re-block with starch while damp. Store flat or hanging, with nothing heavy pressing on it.

Final Notes
The upper wing should measure 1.7 in (4.3 cm) after Row 4 and 2.3 in (5.8 cm) after Row 6. The lower wing should measure 1.8 in (4.6 cm) and the body 3 in (7.6 cm). Sewn together, the butterfly is 5.1 in (13.0 cm) wide. The 0.2 in (0.5 cm) picot border brings it to 5.5 in (14.0 cm) wide and 4 in (10.2 cm) tall. If each checkpoint matches, the finished ornament will too.
Happy crocheting!