This letter L bag charm is a small, quick project with a lot of texture. Rows of lacy shell stitch alternate between soft lavender and warm peach. A tidy lavender border frames the outline, and three tiny white daisies add a spring garden touch.
The look is sweet and personal. You can clip it to a tote, a backpack, or a key set, and it makes a good gift for anyone whose name starts with L. The stripes change color every row, so the letter reads clearly even from a distance.
The pattern uses US crochet terms. The finished charm measures 4.4 in (11.2 cm) wide by 4.9 in (12.4 cm) tall, not counting the keyring hardware.
You work the letter flat in one piece from the bottom up. First comes a 4-shell base. The stem then continues over the left 2 shells, a flared top row finishes the stem, and a small serif fan goes on the right end of the base. One round of single crochet borders the whole outline. After that you make the daisies and leaves separately, sew them on, and attach the hardware.
Finished Size and Construction
- Finished size: 4.4 in (11.2 cm) wide x 4.9 in (12.4 cm) tall
- Skill level: Advanced beginner
- Terminology: US crochet terms
- Yarn weight: Sport (#2) cotton
- Hook: 3.0 mm
- Number of pieces: 1 letter, plus 3 daisy and 4 leaf appliqués
- Layout: One single letter L, not joined to any other piece
- Base width before border: 4 in (10.2 cm)
- Stem width before border: 2 in (5.1 cm)
- Top bar width before border: 2.4 in (6.1 cm)
- Height before border: 4.5 in (11.4 cm)
- Border depth: 0.2 in (0.5 cm) on every edge
Materials
Use a smooth, mercerized sport-weight cotton. It shows the shell texture clearly, holds its shape on a bag, and doesn’t fuzz. A yarn of about 165 m per 50 g (180 yd per 1.75 oz) is a good match.
- Lavender (A): 7 g / 23 m (25 yd), for the odd rows, serif and border
- Peach (B): 4 g / 13 m (14 yd), for the even rows
- White (C): 2 g / 7 m (8 yd), for the daisy petals
- Yellow (D): 1 g / 3 m (3 yd), for the daisy centers
- Green (E): 1 g / 3 m (3 yd), for the leaves
All quantities include a margin of about 20% for swatching and weaving in ends.
Tools:
– 3.0 mm crochet hook (between US C-2 and D-3)
– Tapestry needle
– Scissors
– Stitch marker
– Blocking mat and rust-proof pins
– Gold split keyring, 1 in (2.5 cm)
– Gold chain, 1 in (2.5 cm) long
– 2 gold jump rings, 0.25 in (0.6 cm)
– 2 pairs of flat-nose pliers
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- st(s) – stitch(es)
- MR – magic ring
- RS / WS – right side / wrong side
Special stitch – Shell: 5 dc worked into the same stitch.
Row types used in the stem:
– A-row (13 sts): sc, shell, sc, shell, sc. The shells sit on the sc of the row below.
– B-row (13 sts): 3-dc half shell, sc, shell, sc, 3-dc half shell. The shells sit on the sc of the row below, and the sc sit in the center dc of the shells below.
Gauge and Checkpoints
Gauge matters because the border counts depend on it. The gauge swatch is simply Rows 1–2 of the base. If it matches, keep going.
- Gauge: Rows 1–2 (25 sts) = 4 in (10.2 cm) wide x 1 in (2.5 cm) tall
- Border gauge: about 6 sc = 1 in (2.5 cm)
Checkpoints (measure flat, without stretching):
– After Row 2: 4 in (10.2 cm) wide, 1 in (2.5 cm) tall
– After Row 4: 2 in (5.1 cm) tall; stem 2 in (5.1 cm) wide
– After Row 6: 3 in (7.6 cm) tall
– After Row 8: 4 in (10.2 cm) tall
– After Row 9: 4.5 in (11.4 cm) tall; top bar 2.4 in (6.1 cm) wide
– After border: 4.4 in (11.2 cm) x 4.9 in (12.4 cm)
If your swatch is too big, go down to a 2.75 mm hook. If it is too small, go up to a 3.25 mm hook. A difference of up to 0.125 in (0.3 cm) is fine. Anything more will make the border cup or ruffle.

Letter Pattern
Cut the yarn at the end of every row and leave a 4 in (10.2 cm) tail. The border will cover the tails later. Join each new color with a standing stitch or a sl st and ch 1.
Base
Foundation: With A, ch 26.
Row 1 (RS, A): Sc in 2nd ch from hook, [sk 2 ch, shell in next ch, sk 2 ch, sc in next ch] 4 times. Fasten off. (25 sts: 4 shells, 5 sc)
Row 2 (WS, B): Turn. Join B in the first sc. Ch 3 (counts as dc), 2 dc in the same sc, [sc in the center dc of the next shell, shell in the next sc] 3 times, sc in the center dc of the last shell, 3 dc in the last sc. Fasten off. (25 sts: 3 shells, 2 half shells, 4 sc)
For reference, the Row 2 stitches numbered from the left edge (RS view) are:
– sts 1–3: half shell
– st 4: sc
– sts 5–9: shell
– st 10: sc
– sts 11–15: shell
– st 16: sc
– sts 17–21: shell
– st 22: sc
– sts 23–25: half shell
Checkpoint: 4 in (10.2 cm) x 1 in (2.5 cm).
Stem
The stem sits over the left 13 stitches of Row 2. With RS facing, st 13 is the center dc of the second full shell from the left.
Row 3 (RS, A): With RS facing, join A with sc in st 13. Then shell in st 10 (sc), sc in st 7 (center dc), shell in st 4 (sc), sc in the top of the ch-3 (st 1). Fasten off. (13 sts: A-row)
Sts 14–25 of Row 2 stay unworked for now. They form the foot.
Row 4 (WS, B): Turn. Join B in the first sc. Ch 3, 2 dc in the same st, sc in the center dc of the next shell, shell in the next sc, sc in the center dc of the next shell, 3 dc in the last sc. Fasten off. (13 sts: B-row)
Row 5 (RS, A): Turn. Join A with sc in the first st, shell in the next sc, sc in the center dc of the next shell, shell in the next sc, sc in the top of the ch-3. Fasten off. (13 sts: A-row)
Rows 6–8: Repeat Row 4 with B, Row 5 with A, and Row 4 with B. (13 sts each)
Checkpoint after Row 8: 4 in (10.2 cm) tall, stem 2 in (5.1 cm) wide.
Top Bar (Flared)
Row 9 (RS, A): Turn. Join A in the first st (the last dc of Row 8). Ch 3 (counts as dc), 3 dc in the same st, sk 2 sts, sc in the next sc, shell in the center dc of the next shell, sc in the next sc, sk 2 sts, 4 dc in the top of the ch-3. Fasten off. (15 sts: 4 + 1 + 5 + 1 + 4)
Row 9 is the only row where the fans sit on center dc instead of sc. That shift, plus the 4-dc end fans, makes the top bar flare 0.2 in (0.5 cm) past the stem on each side.
Checkpoint: 4.5 in (11.4 cm) tall; top bar 2.4 in (6.1 cm) wide.
Foot Serif
Serif (RS, A): With RS facing, join A with sl st in st 25 of Row 2 (right edge). Sk 2 sts, shell in st 22 (sc), sl st in st 21. Fasten off. (7 sts: 1 sl st + 5 dc + 1 sl st)
The fan stands up from the right end of the base and frames the foot. Sts 14–20 of Row 2 stay exposed as the peach shelf.
Border
Border gauge: 6 sc per 1 in (2.5 cm). Work 3 sc into each row end (each row is 0.5 in / 1.3 cm tall), 1 sc into each stitch, and 3 sc into each outer corner stitch.
With RS facing and A, join with sc in the bottom-left corner (the last free loop of the foundation chain). You will work counterclockwise.
Round 1 (A):
1. Bottom edge: Work 2 more sc in the same corner loop (3 sc in the corner), 1 sc in each of the next 23 free loops, then 3 sc in the last loop. (29 sc, including both corners)
2. Right edge of foot: 3 sc in each end of Rows 1–2. (6 sc)
3. Serif: 2 sc in the side of the first serif dc, 1 sc in each of the 5 dc, 2 sc in the side of the last serif dc. (9 sc)
4. Shelf: 1 sc in each of Row 2 sts 20 to 14. (7 sc)
5. Right edge of stem: 3 sc in each end of Rows 3–9. (21 sc)
6. Top edge: 3 sc in the first st of Row 9, 1 sc in each of the next 13 sts, 3 sc in the last st. (19 sc, including both corners)
7. Left edge: 3 sc in each end of Rows 9 down to 1. (27 sc)
Join with sl st to the first sc. (118 sc total)
Fasten off and weave in all ends behind the border.
Why the math works: Each row is 0.5 in (1.3 cm) tall, so 3 sc per row end matches the 6 sc per inch border gauge. The bottom edge has 25 stitches over 4 in (10.2 cm), which is the same density. The total checks out: 29 + 6 + 9 + 7 + 21 + 19 + 27 = 118.
The 3-sc corners turn the outer corners neatly. The inner corner where the shelf meets the stem needs no extra stitches, because the shelf and row-end counts already pull it square. The border adds 0.2 in (0.5 cm) to every edge:
– Width: 4 + 0.2 + 0.2 = 4.4 in (11.2 cm)
– Height: 4.5 + 0.2 + 0.2 = 4.9 in (12.4 cm)
Daisies and Leaves
Daisy (make 3)
Round 1 (D): 5 sc in MR, then pull the ring closed. Join with sl st to the first sc and fasten off. (5 sc)
Round 2 (C): Join C in any sc. In each sc, work (sl st, ch 2, 2 dc, ch 2, sl st). Join and fasten off, leaving a 6 in (15.2 cm) tail. (5 petals)
Each daisy measures about 0.9 in (2.3 cm) across.
Leaf (make 4)
With E, ch 5. Sl st in the 2nd ch from hook, sc in the next ch, hdc in the next ch, sc in the last ch. Fasten off, leaving a 6 in (15.2 cm) tail. (4 sts)
Each leaf is about 0.6 in (1.5 cm) long.
Placement
Sew each piece flat with small stitches through the front layer only.
- Daisy 1: On the upper-left corner of the top bar, with 1 leaf tucked under its right side.
- Daisy 2: On the left edge of the stem over Rows 4–5, with 1 leaf below it on the left.
- Daisy 3: On the base just left of the serif, with 1 leaf on each side.
Hardware
- Open a jump ring with two pairs of pliers. Twist it sideways instead of pulling it apart.
- Thread the jump ring through the top border, above the center (7th) st of Row 9, and through the end link of the chain. Close it.
- Use the second jump ring to connect the other end of the chain to the split ring.
Final Blocking
- Lightly mist the letter with water until it is damp, not soaked. Do this before sewing on the appliqués, or mist around them.
- Lay it RS up on the blocking mat.
- Pin the outer corners first: the bottom corners, then the top bar corners.
- Pin the bottom edge straight at 4.4 in (11.2 cm), the top bar at 2.8 in (7.1 cm), and the stem at 2.4 in (6.1 cm).
- Check that the total height is 4.9 in (12.4 cm).
- Gently open each shell with your fingertip so the fans spread evenly.
- Pin the serif fan upright and square off the inner corner.
- Let it dry completely, then unpin.
Final Quality-Control Checklist
- Row 1 has 25 sts, and Rows 3–8 each have 13 sts
- Row 9 has 15 sts and flares evenly on both sides
- The serif has 7 sts and stands upright
- The border has 118 sc and lies flat with no cupping
- All four outer corners have 3 sc
- Stripes alternate cleanly between lavender and peach
- All tails are hidden inside the border
- Each daisy has 5 even petals and a centered yellow middle
- The jump rings are fully closed with no gaps
- The finished size is 4.4 in (11.2 cm) x 4.9 in (12.4 cm)
Troubleshooting
- Shells lean sideways: You skipped the wrong number of stitches. Every shell needs exactly 2 skipped sts on each side.
- Stem drifts right: Row 3 started in the wrong place. Rejoin in st 13, the center dc of the second full shell.
- Border ruffles: Use 2 sc per row end instead of 3, or go down one hook size for the border only.
- Border cups: Check that you worked 3 sc per row end and 3 sc in each outer corner.
- Gaps at the color changes: Pull the tails snug before weaving them in.
- Daisy center has a hole: Tighten the magic ring before joining.
- Charm twists on the bag: Move the jump ring to the exact center of the top edge.
Care
Hand wash in cool water with mild soap and lay flat to dry. Take the charm off the bag before washing, and don’t wring it, so the shells and the metal hardware stay in shape.

Final Notes
The measurement chain is simple:
1. Rows 1–2 set the gauge at 4 in (10.2 cm) wide and 1 in (2.5 cm) tall.
2. Each stem row adds 0.5 in (1.3 cm), reaching 4.5 in (11.4 cm) after Row 9.
3. The 118-stitch border adds 0.2 in (0.5 cm) per edge, for a finished 4.4 in (11.2 cm) x 4.9 in (12.4 cm) letter.
If each checkpoint matches, the border and blocking will fall into place. The daisies are the final, cheerful touch.
Happy crocheting!