The Midnight Frost Mandala Ornament is a round Christmas bauble covered in deep navy crochet and outlined in bright silver. The front shows a ten-petal mandala with silver rays and a pearl center. Around it is a second ring of larger pointed petals, with a small silver bead at every tip.
The palette has just two colors. Navy cotton forms the body and petals, and silver metallic forms the outlines, cap, rays and hanging loop. The look is classic and a little formal, like a vintage glass ornament reworked in thread.
This pattern uses US crochet terms. The finished ball measures about 3.25 in (8.3 cm) across. It is about 3.85 in (9.8 cm) tall with the cap and about 6.1 in (15.5 cm) tall with the loop.
First you crochet a navy dome that covers the back and sides of a 3 in (7.6 cm) foam ball. Then you make a flat mandala motif that closes the front. After joining the two, you work a petal border into the dome’s free front loops. A small silver cap and a chain loop finish the ornament.
Finished Size and Construction
- Finished size: ball 3.25 in (8.3 cm) across; 3.85 in (9.8 cm) tall with cap; 6.1 in (15.5 cm) tall with loop
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Sport (#2)
- Hook: 2.75 mm (US C-2)
- Number of pieces: 4 (dome, mandala motif, cap, loop cord), assembled into 1 ornament
- Layout: dome at the back, mandala at the front, cap and loop at the top
- Piece size: dome opening 2.9 in (7.4 cm) across; mandala 2.9 in (7.4 cm) from tip to tip
- Size before border: covered ball about 3.1 in (7.9 cm) across
- Border depth: petals 0.6 in (1.5 cm) long, lying flat on the surface
Materials
Use a smooth mercerized cotton for the navy because it gives crisp stitch definition and holds the petal points. For the silver, choose a sport-weight metallic or cotton-metallic blend that is not too slippery.
- Navy blue, sport cotton: 10 g (33 m)
- Silver metallic, sport weight: 8 g (24 m)
Tools and notions:
- 2.75 mm (US C-2) crochet hook
- One 3 in (7.6 cm) foam ball
- 20 silver beads, 4 mm, with holes large enough for the silver yarn
- 1 silver pearl bead, 8 mm
- Beading needle or floss threader
- Tapestry needle and stitch marker
- Straight pins and a spray bottle
These quantities include about 20% extra for swatching and yarn tails.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- tr – treble crochet
- inc – 2 sc in the same stitch
- sk – skip
- sp – space
- BLO / FLO – back loop only / front loop only
- MR – magic ring
- st(s) – stitch(es)
Bead chain (bead ch): Slide one pre-strung bead up to the hook, yarn over and pull through. The bead sits on the back of the chain. Push it to the right side when the round is finished.
Small shell: (2 dc, tr, ch 2, tr, 2 dc) in the same st.
Large shell: (2 dc, 2 tr, ch 2, 2 tr, 2 dc) in the same st.
Gauge and Checkpoints
Gauge: 26 sc and 26 rounds = 4 in (10.2 cm) in navy, worked in spiral rounds. Gauge matters because the dome must fit snugly over the ball.
Test one piece first. Make the mandala before anything else. It is small and uses both yarns, so it doubles as your gauge swatch.
- Mandala Round 1: about 0.6 in (1.5 cm) across
- Mandala Round 2: about 1.2 in (3.0 cm) across
- Mandala Round 3: about 1.5 in (3.8 cm) across
- Mandala Round 5: 2.9 in (7.4 cm) from tip to tip
- Dome Round 10: edge measures about 9.25 in (23.5 cm) around
- Dome Round 15: 2.25 in (5.7 cm) measured along the curve from the center; about 1.5 in (3.8 cm) deep when cupped
- Dome Round 17: opening is 2.9 in (7.4 cm) across
If your pieces are too big, go down 0.25 mm in hook size. If they are too small, go up 0.25 mm. The mandala and the dome opening must match, so check both before joining.

Mandala Motif (Front)
Work in joined rounds with the right side facing. Before Round 5, string 10 of the 4 mm beads onto the silver yarn.
Round 1 (navy): MR, ch 3 (counts as dc), 9 dc in ring, sl st to top of ch-3. (10 dc)
Round 2 (navy): Ch 3 (counts as dc), dc in same st, 2 dc in each st around, sl st to top of ch-3. (20 dc) Fasten off.
Round 3 (silver): Join in any st, ch 1, sc in next st, 2 sc in next st; repeat from * 10 times, sl st to first sc. (30 sc)* Fasten off.
Round 4 (navy, petals): Join in any sc, ch 1, sc in this st, small shell in next st, sk next st; repeat from * 10 times, sl st to first sc. (10 sc + 60 shell sts = 70 sts, plus 10 ch-2 sps)* Each repeat uses 3 sts, and 10 × 3 = 30. Fasten off.
Round 5 (silver outline): Join in any sc between petals. Sl st in sc, sc in each of next 2 dc, 2 sc in tr, (sc, bead ch, sc) in ch-2 sp, 2 sc in tr, sc in each of next 2 dc; repeat from * 10 times, sl st to first sl st. (120 sc + 10 sl sts + 10 bead chs)*
Each petal has 12 sc and a beaded tip. Fasten off, leaving a 12 in (30.5 cm) tail.
Rays and center: Use the silver tail to embroider 20 straight stitches from the center out to Round 3. Make 10 long rays pointing at the petal centers and 10 short rays between them. Sew the 8 mm pearl over the magic ring.
Dome (Back)
Work in navy in continuous spiral rounds. Mark the first st of each round.
Round 1: MR, 6 sc in ring. (6)
Round 2: Inc in each st around. (12)
Round 3: Sc in next st, inc; repeat from * 6 times. (18)*
Round 4: Sc in next 2 sts, inc; repeat from * 6 times. (24)*
Round 5: Sc in next 3 sts, inc; repeat from * 6 times. (30)*
Round 6: Sc in next 4 sts, inc; repeat from * 6 times. (36)*
Round 7: Sc in next 5 sts, inc; repeat from * 6 times. (42)*
Round 8: Sc in next 6 sts, inc; repeat from * 6 times. (48)*
Round 9: Sc in next 7 sts, inc; repeat from * 6 times. (54)*
Round 10: Sc in next 8 sts, inc; repeat from * 6 times. (60)* The edge measures about 9.25 in (23.5 cm) around.
Rounds 11–15: Sc in each st around. (60 each round)
Round 16 (eyelets): Sc in next 5 sts, ch 1, sk 1; repeat from * 10 times. (50 sc + 10 ch-1 sps = 60)*
Round 17: Sc in each sc and each ch-1 sp around. (60) Sl st in next st to smooth the step at the end of the round.
The 10 eyelets form a ring of small holes just behind where the border will go. Fasten off, leaving a 12 in (30.5 cm) tail.
Cap
Work in silver in continuous rounds.
Round 1: MR, 6 sc in ring. (6)
Round 2: Inc in each st around. (12)
Round 3: Sc in next st, inc; repeat from * 6 times. (18)*
Round 4: Sc in BLO of each st. (18) This makes a crisp top edge.
Rounds 5–7: Sc in each st around. (18 each round)
Round 8: Sc in next 5 sts, inc; repeat from * 3 times. (21)*
Fasten off, leaving a 10 in (25.4 cm) tail. The cap is about 0.9 in (2.3 cm) wide at the top, 1 in (2.5 cm) wide at the base and 0.75 in (1.9 cm) tall.
Hanging Loop
With silver, ch 36. Sl st in the back bump of the second ch from the hook and in each ch across. (35 sl sts) The cord is about 5 in (12.7 cm) long.
Joining
Step 1: Slip the foam ball into the dome. Round 1 sits at the back center, and Rounds 16–17 sit just in front of the ball’s widest point.
Step 2: Mark any st of Round 17 as st 1. Place the mandala over the opening, right side out.
Step 3: Use the navy tail to sew the mandala to the BLO of Round 17. Leave the front loops free for the border.
Stitch-to-stitch logic: Round 17 has 60 sts. The mandala has 10 beaded tips and 10 sl-st valleys, which makes 20 anchor points. Since 60 ÷ 20 = 3, tack one anchor to every third st. Tips go on sts 1, 7, 13 and so on, and valleys go on sts 4, 10, 16 and so on. Between anchors, catch the silver outline every 2 to 3 sc.
Tension: Pull each stitch just snug enough to close the gap. Pulling too hard makes the mandala dimple and the tips curl under.
Checkpoint: The covered ball measures about 3.1 in (7.9 cm) across in both directions. The front may be slightly flatter than the back.
Border
Work into the free front loops of Round 17. Before starting, string the remaining 10 beads onto the silver yarn.
Border gauge: Each large petal is 6 sts wide at the base, which is about 0.9 in (2.3 cm), and 0.6 in (1.5 cm) long.
Border Round 1 (navy): Join in the FLO of st 2 and ch 1. Sc in FLO of this st, sk 1, large shell in FLO of next st, sk 1, sc in FLO of next st, sk 1; repeat from * 10 times, sl st to first sc. (20 sc + 80 shell sts = 100 sts, plus 10 ch-2 sps)* Fasten off.
Border Round 2 (silver outline): Join in the first sc of any repeat. Sc in sc, sc in each of next 2 dc, sc in tr, 2 sc in next tr, (sc, bead ch, sc) in ch-2 sp, 2 sc in next tr, sc in next tr, sc in each of next 2 dc, sc in next sc; repeat from * 10 times, sl st to first sc. (140 sc + 10 bead chs)*
Each petal has 14 sc. Fasten off.
Why the math works: The border starts with 60 sts, which is all of Round 17. Each repeat uses exactly 6 sts, and 10 × 6 = 60. So the last repeat ends on st 1, right before the first sc. The shells land on sts 4, 10, 16 and so on. These are the same sts as the mandala valleys, halfway between the tips. This offsets the two petal layers, so the large petals frame the small ones. Each shell sits in a single st, so the border lies on the surface without making the ball wider.
Attach Cap and Loop
Choose a spot between two border petals as the top of the ornament. Center the cap over dome Rounds 13–17 at that spot. Sew Round 8 down, one stitch per cap stitch.
Fold the loop in half and push both ends through the top of the cap. Knot them inside and sew the knot to the dome. The loop stands about 2.25 in (5.7 cm) above the cap.
Final Blocking
- Lightly mist the ornament, keeping the foam ball as dry as possible.
- Press each mandala petal flat with your fingertips.
- Shape each border petal so it lies against the ball with its bead pointing forward.
- Pin the bead tips into the foam with straight pins.
- Pinch the cap’s top ridge into a crisp edge.
- Let it dry for at least 6 hours, then remove the pins.
Final Quality-Control Checklist
- The ball is 3.25 in (8.3 cm) across and the cover is snug
- The mandala shows 10 petals, 20 rays and a centered pearl
- All 20 small beads face outward
- Border petals alternate evenly with mandala petals
- The 10 eyelets form an even ring
- The cap sits upright without wobbling
- The loop is centered and secure
- No yarn ends show
Troubleshooting
Dome is loose on the ball: Your gauge is too loose. Rework the dome with a smaller hook instead of changing the stitch count, because the border depends on 60 sts.
Mandala ruffles: Round 4 is too loose. Block it firmly or rework it with a smaller hook.
Mandala cups: Round 2 is too tight. Rework it with looser tension.
Petal tips curl under: The silver outline is too tight. Rework it with a hook 0.25 mm larger.
Beads face inward: Push them to the right side and tack each one with a small silver stitch.
Gaps at the seam: Add extra tacking stitches between the anchor points. The border will hide them.
Care
Spot clean with a damp cloth and mild soap, and keep the ornament away from heat. Store it in a small box so the petal tips keep their shape.

Final Notes
The measurement chain is short. A gauge of 26 sc = 4 in (10.2 cm) gives a 60-stitch dome opening 2.9 in (7.4 cm) across. That matches the 2.9 in (7.4 cm) mandala, and together they cover a 3 in (7.6 cm) ball at about 3.1 in (7.9 cm). The 0.6 in (1.5 cm) border petals bring the ball to 3.25 in (8.3 cm). The cap and loop bring the total height to 6.1 in (15.5 cm). If every checkpoint matches, the pieces will fit together without adjustments.
Happy crocheting!