Peppermint Twist Grocery Bag Holder Crochet Pattern

The Peppermint Twist Grocery Bag Holder is a festive, practical way to keep plastic bags tidy. A mint green mesh tube holds the bags, a twisted red-and-cream cuff trims the top like a peppermint stick, and a small candy cane appliqué decorates the front. A covered ring at the top lets it hang from any hook or cabinet knob.

The style is cheerful and simple. The colors are soft mint, bright red and creamy white. The open filet mesh shows the bags inside and uses relatively little yarn.

This pattern uses US crochet terms. The finished body measures 6 in (15.2 cm) wide laid flat and 17 in (43.2 cm) long. Including the ring, the holder hangs about 21 in (53.3 cm) long.

The body is worked in the round from the bottom up. You start with a solid single crochet band around the dispensing opening, increase to the full width, work straight filet mesh rounds and finish with a solid rim. Then you make the ring, two twisted cords for the cuff and two small cords for the candy cane, and sew everything in place.

Finished Size and Construction

  • Finished body size: 6 in (15.2 cm) wide flat × 17 in (43.2 cm) long
  • Total hanging length: about 21 in (53.3 cm) including the ring
  • Skill level: Easy / Advanced Beginner
  • Terminology: US crochet terms
  • Yarn weight: Worsted weight (#4) cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 6 (body, ring, 2 cuff cords, 2 candy cane cords)
  • Layout: Vertical tube with the ring at the top back, cuff at the rim, appliqué on the front
  • Body circumference: 12 in (30.5 cm) in mesh
  • Size before border (rim): 6 in (15.2 cm) wide × 16.25 in (41.3 cm) long
  • Border (rim) depth: 0.75 in (1.9 cm)
  • Bottom opening: 4 in (10.2 cm) wide laid flat

Materials

Use a smooth worsted weight cotton or cotton blend. Cotton holds its shape well and gives the mesh crisp, square openings. Acrylic also works, but it stretches more over time.

  • Mint green: 100 g / about 170 m (186 yd)
  • Red: 10 g / about 17 m (19 yd)
  • Cream/white: 10 g / about 17 m (19 yd)

These quantities include a margin of about 15% for gauge swatching and small differences in tension.

Tools:

  • 5.0 mm (H-8) crochet hook
  • One plastic or metal ring, 2.75 in (7.0 cm) outer diameter
  • Stitch marker
  • Tapestry needle
  • Scissors
  • Straight pins
  • Measuring tape

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sp – space
  • st(s) – stitch(es)
  • rep – repeat
  • inc – 2 sc in the same stitch

Special stitch – Mesh square: One dc and the ch 2 that follows it. Each mesh square takes up 3 sts of width (1 dc + 2 ch).

Gauge and Checkpoints

  • Single crochet: 16 sc and 16 rounds = 4 in (10.2 cm)
  • Mesh: 4 mesh squares and 4 mesh rounds = 3 in (7.6 cm), so each square is 0.75 in (1.9 cm) wide and tall
  • Hdc cord: 7 hdc = 2 in (5.1 cm)

For this project, the body itself is your test piece. Check your measurements at each checkpoint below before going on.

  • After Round 1: The opening ring measures 8 in (20.3 cm) around, or 4 in (10.2 cm) laid flat.
  • After Round 5: The base band is 1.25 in (3.2 cm) tall and 12 in (30.5 cm) around.
  • After Round 9 (4 mesh rounds): The mesh section is 3 in (7.6 cm) tall.
  • After Round 25: The body is 16.25 in (41.3 cm) long and 6 in (15.2 cm) wide flat.

If your piece is too big, go down one hook size. If it is too small, go up one hook size. A finished holder that is up to 0.5 in (1.3 cm) narrower or wider still works fine, but the cuff cords must be adjusted to match your rim (see the Border section).

A red and white crocheted candy cane rests against a light green mesh knit background.

Body

The body is worked in joined rounds with the right side facing you. Do not turn.

Foundation: With mint green, ch 32. Join with a sl st to the first ch to form a ring, making sure the chain is not twisted.

Round 1: Ch 1, sc in each ch around, join with a sl st to the first sc. (32 sc)

Round 2: Ch 1, sc in each st around, join. (32 sc)

Round 3 (growth): Ch 1, *sc in next 3 sts, inc in next st; rep from * 8 times total, join. (40 sc)

Round 4 (growth): Ch 1, *sc in next 4 sts, inc in next st; rep from * 8 times total, join. (48 sc)

Round 5: Ch 1, sc in each st around, join. (48 sc)

The base band now measures 1.25 in (3.2 cm) tall. Rounds 3 and 4 widen the band from the 4 in (10.2 cm) opening to the full 6 in (15.2 cm) body width. This makes the gently rounded base.

Round 6 (conversion to mesh): Ch 5 (counts as dc + ch 2), skip next 2 sts, *dc in next st, ch 2, skip next 2 sts; rep from * around, join with a sl st to the 3rd ch of the beginning ch-5. (16 dc + 16 ch-2 sps = 16 mesh squares, 48 sts of width)

This round places 1 dc on every 3rd sc, so 48 ÷ 3 = 16 squares.

Rounds 7–25: Ch 5 (counts as dc + ch 2), *dc in next dc, ch 2; rep from * around, join to the 3rd ch of the beginning ch-5. (16 mesh squares per round)

That gives 20 mesh rounds in total (Rounds 6–25), measuring 15 in (38.1 cm). Do not fasten off; the rim continues directly in the Border section.

Checkpoint: The body measures 1.25 in + 15 in = 16.25 in (41.3 cm) long and 6 in (15.2 cm) wide flat.

Make All Pieces

Hanging Ring

With mint green, join yarn to the plastic ring with a sl st. Ch 1. Work 44 sc over the ring, pushing the stitches together so the ring is fully covered. Join to the first sc and fasten off, leaving a 6 in (15.2 cm) tail. With the cover, the ring measures about 3.5 in (8.9 cm) across.

Cuff Cords (make 1 red, 1 cream)

Ch 62. Hdc in the 3rd ch from the hook and in each ch across. (60 hdc) Fasten off, leaving a 10 in (25.4 cm) tail on each end of the red cord.

Each cord measures about 17 in (43.2 cm) before twisting.

Candy Cane Cords (make 1 red, 1 cream)

Ch 22. Hdc in the 3rd ch from the hook and in each ch across. (20 hdc) Fasten off, leaving a 10 in (25.4 cm) tail on the red cord only.

Each cord measures about 5.75 in (14.6 cm) before twisting.

Pieces by Color

Piece Color Quantity
Body Mint green 1
Ring Mint green 1
Cuff cord Red 1
Cuff cord Cream 1
Candy cane cord Red 1
Candy cane cord Cream 1

Assembly Layout (front view)

        ( RING )          <- attached at center back
   [ RED/CREAM CUFF ]     <- around Round 28 rim
   |  #  #  #  #  #  |
   |  #  #  J  #  #  |    <- J = candy cane, front center
   |  #  # J J #  #  |       upper-middle mesh
   |  #  #  J  #  #  |
   |  #  #  #  #  #  |
   |  #  #  #  #  #  |
    \ ( opening )   /     <- sc base band

Joining

Ring tab: Flatten the finished body so that the beginning-of-round join sits at center back. The 54 rim sts split into 27 front and 27 back. Count 10 sts in from the back fold. Join mint green in the next st.

  • Row 1: Ch 1, sc in the same st and the next 6 sts, turn. (7 sc)
  • Rows 2–8: Ch 1, sc across, turn. (7 sc)

The tab measures 1.75 in (4.4 cm) wide × 2 in (5.1 cm) long, with 10 rim sts left free on each side of it (10 + 7 + 10 = 27).

Fold the tab over the bottom of the ring toward the inside of the holder. Whipstitch the last row of the tab to the base of Row 1, one stitch to one stitch (7 tacks). The ring now sits 1 in (2.5 cm) above the rim.

Cuff: Lay the red and cream cords side by side and pin them together at one end. Twist them around each other evenly, about 1 full twist every 0.75 in (1.9 cm), until the twisted rope measures 13.5 in (34.3 cm). This equals the rim circumference. Pin the rope around Round 28, butting the ends at center back behind the tab.

With a red tail, tack the rope to the rim at every 2nd sc. That is 27 tacks for 54 sts. Catch only the back loops of the rim so the stitching stays hidden. Sew the two rope ends together firmly.

Candy cane: Twist the red and cream candy cane cords together the same way, to about 4.75 in (12.1 cm). Shape a straight shaft 3.25 in (8.3 cm) long and curl the top 1.5 in (3.8 cm) into a hook. The finished cane is 4 in (10.2 cm) tall and 2 in (5.1 cm) wide.

Pin the cane to the front center, with the top of the hook 3 in (7.6 cm) below the cuff. With the red tail, tack it to the mesh bars about every 0.5 in (1.3 cm).

Tension: Keep the tacking snug but not tight. If you pull too hard, the mesh puckers and the squares lose their shape.

Checkpoint: The body is still 6 in (15.2 cm) wide flat, the cuff is 6.75 in (17.1 cm) wide flat, and the total hanging length is about 21 in (53.3 cm).

Border

The border is the solid rim worked directly onto the last mesh round, before the ring tab and cuff are attached.

Border gauge: 16 sc = 4 in (10.2 cm).

Round 26 (conversion): Ch 1, sc in the same st as the join, 2 sc in the next ch-2 sp, *sc in next dc, 2 sc in next ch-2 sp; rep from * around, join.

Count: 16 sc (1 per dc) + 32 sc (2 per ch-2 sp) = 48 sc. Laid flat, that is 24 sc per side.

Round 27 (growth): Ch 1, *sc in next 7 sts, inc in next st; rep from * 6 times total, join. (54 sc, 27 per side)

Round 28: Ch 1, sc in each st around, join. (54 sc, 27 per side) Fasten off and weave in the end.

Why the math works: Each mesh square is 3 sts wide (1 dc + 2 ch). Working 3 sc per square gives 16 × 3 = 48 sc, so Round 26 matches the mesh width exactly. Round 27 adds 6 sts for a slight flare at the top: 54 ÷ 4 = 13.5 in (34.3 cm) around, or 6.75 in (17.1 cm) laid flat. The flare gives the cuff a firm, slightly wider ledge to sit on. The three rim rounds add 0.75 in (1.9 cm), bringing the body to 17 in (43.2 cm).

Optional opening edge: Join mint green to the foundation chain and sl st in each ch around (32 sl sts). This firms up the dispensing opening.

Final Blocking

  1. Weave in all remaining ends, except the tails you still need for sewing.
  2. Dampen the body by spraying it with water until it is evenly moist.
  3. Slide a rolled towel or a cardboard form 6 in (15.2 cm) wide inside the tube.
  4. Straighten the mesh rounds so the dc bars run vertically and the squares are 0.75 in (1.9 cm) across.
  5. Pin the length to 17 in (43.2 cm).
  6. Let it dry completely before attaching the cuff and the candy cane.
  7. Lightly steam the twisted cords if they untwist. Do not press them flat.

Final Quality-Control Checklist

  • The bottom opening measures 4 in (10.2 cm) wide flat.
  • There are 16 mesh squares in every round, with no spiraling.
  • There are 20 mesh rounds in total.
  • The rim has 54 sc, 27 per side.
  • The tab is centered on the back with 10 rim sts free on each side.
  • The cuff ends meet neatly at center back.
  • The candy cane hook faces the way you want and is tacked flat.
  • All ends are secured.

Troubleshooting

  • The mesh slants: Make sure each dc goes into the dc below, not into the chain space.
  • The squares are taller than they are wide: Try ch 1 + skip 1 tension tests, or go down a hook size for the dc only.
  • The opening is too tight for bags: Add 4 more chains to the foundation and add 1 extra inc per repeat in Round 3.
  • The cuff gaps: Twist the cords more tightly to shorten the rope, then add more tacks.
  • The ring tilts: Re-center the tab between the free stitches (10 on each side).

Care

Hand wash in cool water and lay flat to dry, reshaping the mesh while it is damp. Avoid wringing, which can loosen the twisted cords.

Crocheted green tissue box holders with red and white candy cane stripes displayed on wooden panels with tissue dispensing.

Final Notes

Here is the full measurement chain:

  • A 32-st opening of 4 in (10.2 cm) grows to 48 sts.
  • 16 mesh squares make a body 6 in (15.2 cm) wide.
  • 20 mesh rounds add 15 in (38.1 cm).
  • The 54-st rim brings the body to 17 in (43.2 cm).
  • A 13.5 in (34.3 cm) twisted cuff fits the rim exactly.
  • The ring brings the total hanging length to about 21 in (53.3 cm).

Check each number as you go, and your holder will hang straight and dispense bags smoothly. For a second holder, swap the mint for pink.

Happy crocheting!

Leave a Comment