Prima Ballerina Window Curtain Crochet Pattern

This curtain has a row of little dancers across a sunny window. A teal lace header with a band of four-petal flowers holds nine hanging strands. Five strands carry two ballerinas each, with pink tutus, spiral-round heads, and arms raised over their heads. The four strands between them alternate pink bows with small teal popcorn beads.

The palette is just two colors: deep teal blue for the structure and soft peach pink for the tutus, bows, flowers, and header scallops. Teal outlines every tutu, so the dancers still read clearly against bright light.

The pattern uses US crochet terms. The finished curtain measures 30.2 in (76.7 cm) wide. It hangs 35.5 in (90.2 cm) from the top of the header to the tip of the longest strand, not counting the hanging tabs.

You’ll make the small motifs first: ballerinas, bows, flowers, and teardrops. Then you’ll crochet the header in rows, add the scallop and tab edgings, and finally chain each strand straight down from the header, joining the motifs in as you go.

Finished Size and Construction

  • Finished size: 30.2 in (76.7 cm) wide × 35.5 in (90.2 cm) long
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: DK (#3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 1 header, 10 ballerinas, 39 bows, 15 flowers, 9 teardrops
  • Layout: 9 strands, 3.6 in (9.1 cm) apart, with ballerina strands and bow strands alternating
  • Piece sizes: ballerina 7.5 in (19.1 cm) tall, with a tutu 3.25 in (8.3 cm) wide; strand 32.5 in (82.6 cm) long
  • Header before border: 30.2 in × 2.4 in (76.7 cm × 6.1 cm)
  • Border depth: scallops add 0.6 in (1.5 cm) at the bottom edge; the tabs stand 0.8 in (2.0 cm) above the top edge

Materials

Mercerized cotton works best. It holds the open tutu loops crisply, blocks flat, and won’t fuzz in sunlight. Choose a DK yarn of about 110 m per 50 g.

  • Teal blue: 100 g (220 m / 240.6 yd)
  • Peach pink: 100 g (220 m / 240.6 yd)

These quantities include a margin of about 30% over what the sample used. The extra covers your gauge swatch and any re-chained strands.

Tools:

  • 3.5 mm (E-4) hook
  • Tapestry needle
  • Stitch markers
  • Rustproof pins and a blocking board
  • Spray bottle
  • 11 curtain clip rings
  • Scissors
  • Measuring tape

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • MR – magic ring
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • RS – right side

Cluster (cl): Yarn over, insert the hook in the indicated st or sp, pull up a loop, yarn over, and draw through 2 loops. Repeat from * 2 more times (4 loops on the hook). Yarn over and draw through all 4 loops.

Popcorn bead (pc): Ch 4, then work 5 dc in the 4th ch from the hook. Drop the loop from your hook, insert the hook in the top of the first dc, pick up the dropped loop, and pull it through.

Gauge and Checkpoints

Gauge: 20 sc and 22 rows = 4 in (10.2 cm). Chain gauge for the strands: 6 ch = 1 in (2.5 cm), measured relaxed.

Test one piece first. Make a header swatch on 22 ch: work Rows 1–6 with 2 flower repeats over 21 sts. It should measure 4.2 in (10.7 cm) wide. Then make one complete ballerina and check it against these measurements:

  • Head after Round 3: 1 in (2.5 cm) across
  • Waist (bodice Row 5): 1 in (2.5 cm) wide
  • Tutu after Row 4: 3.25 in (8.3 cm) wide × 1.5 in (3.8 cm) deep
  • Whole ballerina, ring tip to toe tip: 7.5 in (19.1 cm)

If your pieces are too big, go down 0.25 mm in hook size. If they’re too small, go up 0.25 mm. Check your chains separately. Tight chains shorten the strands and make the arm ovals pucker.

Teal crocheted figure with round head, looped arms, and pink wings on marble surface.

Ballerina (make 10)

Head (teal)

  • Round 1: MR, 6 sc in the ring. (6 sts)
  • Round 2: 2 sc in each st. (12 sts)
  • Round 3: Sc in next st, 2 sc in next st; repeat 6 times. (18 sts)

Work these as a continuous spiral without joining, so the rounds form the visible swirl. Sl st in the next st.

Neck and bodice (teal, continue from the head)

  • Row 1: Ch 1, sc in the next 3 sts. (3 sts)
  • Row 2: Ch 1, turn, sc in each st. (3 sts)
  • Row 3: Ch 1, turn, 2 sc in the first st, sc in the next st, 2 sc in the last st. (5 sts)
  • Rows 4–5: Ch 2 (does not count as a st), turn, hdc in each st. (5 sts)

Fasten off.

Arms (teal)

  • Row 1: Join at the end of Row 3 on the right side of the bodice. Ch 15, then ch 6 and sl st in the 6th ch from the hook (this makes the top ring). Ch 15 and sl st to the end of Row 3 on the left side.
  • Row 2: Turn. Sc in each of the 15 ch, 10 sc in the ring, sc in each of the 15 ch, then sl st to the right end of Row 3. (40 sts)

Fasten off. The oval should frame the head with a small gap all around.

Tutu (pink, then teal)

  • Row 1: With RS facing, join pink in the first hdc of bodice Row 5. Ch 1, 2 sc in the first st, sc in the next st, 2 sc in the next st, sc in the next st, 2 sc in the last st. (5 + 3 = 8 sts)
  • Row 2: Ch 4 (counts as tr), turn, ch 1, tr in next st; repeat 7 times. (8 tr, 7 ch-1 sps)
  • Row 3: Ch 1, turn, sc in the first tr, ch 5, sc in next tr; repeat 7 times. (8 sc, 7 ch-5 loops)

Fasten off pink.

  • Row 4: Join teal in the first sc. Work 7 sc in the next ch-5 loop, then sl st in the next sc; repeat 7 times. (49 sc, 8 sl st)

Legs and toe (teal)

  • Row 1: Join teal in sc 3 of the center (4th) loop on tutu Row 4. Ch 15 for the left leg. Ch 6 and sl st in the 6th ch from the hook (toe ring). Ch 15 for the right leg, then sl st in sc 5 of the same loop.
  • Row 2: Turn. Sc in each of the 15 ch. In the toe ring work (2 sc, hdc, dc, ch 2, dc, hdc, 2 sc). Sc in each of the 15 ch, then sl st in sc 3. (30 leg sc + 8 toe sts and 1 ch-2 point)

Fasten off. The two legs should meet in a point at the teardrop toe.

Small Motifs

Bow (pink, make 39)

  • Round 1: MR. [Ch 6, sl st in ring] twice for the wings, then [ch 4, sl st in ring] twice for the tails.
  • Round 2: In each ch-6 loop work (sc, hdc, 5 dc, hdc, sc), 9 sts per wing. In each ch-4 loop work (sc, hdc, sc).

Pull the ring tight. Wrap the yarn tail 4 times around the center and secure it. The finished bow measures 1.25 in × 0.75 in (3.2 cm × 1.9 cm).

Flower (pink, make 15)

  • Round 1: MR, (sc, ch 3) 5 times, then sl st to the first sc. (5 ch-3 sps)
  • Round 2: Work (sl st, hdc, dc, hdc, sl st) in each ch-3 sp. (5 petals, 25 sts)

The finished flower is 0.75 in (1.9 cm) across.

Teardrop (teal, make 9)

Ch 7. Sc in the 2nd ch from the hook, then hdc, dc, dc, hdc. Work 3 sc in the last ch. Working along the other side of the chain: hdc, dc, dc, hdc, sc. Ch 2, then sl st in the first sc to form the point. (13 sts)

The finished teardrop is 1 in (2.5 cm) long.

Header (teal, then pink)

  • Row 1: Ch 152. Sc in the 2nd ch from the hook and in each ch across. (151 sts)
  • Row 2: Ch 1, turn, sc in each st. (151 sts)
  • Row 3 (lower petals): Ch 1, turn, sc in the first st, ch 3, sk 4, (cl, ch 3, cl) in the next st, ch 3, sk 4, sc in the next st; repeat 15 times. (16 sc, 15 petal pairs)
  • Row 4 (upper petals): Ch 4 (counts as tr), turn, ch 2, (cl, ch 3, cl) in the ch-3 sp between the next 2 clusters, ch 2, tr in the next sc; repeat 15 times. (16 tr, 15 petal pairs)

Each flower now has 4 petals around a center space.

  • Row 5: Ch 1, turn, sc in the first tr, 2 sc in the ch-2 sp, sc in the top of the cl, 3 sc in the ch-3 sp, sc in the top of the cl, 2 sc in the ch-2 sp, sc in the tr; repeat 15 times. (1 + 15 × 10 = 151 sts)
  • Row 6: Ch 1, turn, sc in each st. (151 sts)

Fasten off.

Checkpoint: The header now measures 30.2 in × 2.4 in (76.7 cm × 6.1 cm).

Make All Pieces

Before you assemble anything, check that you have:

  • Teal: 1 header, 9 teardrops, and the teal parts of 10 ballerinas
  • Pink: 10 tutus, 39 bows, and 15 flowers

You’ll make the 24 popcorn beads in line while you chain the bow strands.

The strands hang from the centers of the header scallops (you’ll add the scallops in the Border section):

Scallop:  1   4   7   10  13  16  19  22  25
Strand:   B   W   B   W   B   W   B   W   B
B = ballerina strand (2 ballerinas, 3 flowers, 3 bows)
W = bow strand (6 bows, 6 popcorn beads)

Joining

Every motif is joined into a single teal chain that runs from the header down.

To pass a chain through a bow or flower:

  1. Sl st into its top center.
  2. Ch 4 down the back of the motif.
  3. Sl st into its bottom center, between the tails or between two petals.

This keeps each motif facing forward and adds 0.75 in (1.9 cm) of length.

Ballerina strand. Join teal in the 4th dc of the scallop. Then work the following sequence twice: ch 9, flower, ch 6, bow, ch 9, sl st into the ballerina’s top ring, then rejoin at the ch-2 toe point. Each pass adds 13 in (33.0 cm). To finish, ch 9, flower, ch 6, bow, ch 9, and sl st into the rounded end of a teardrop.

Total: 26 + 5.5 + 1 = 32.5 in (82.6 cm).

Bow strand. Join teal in the 4th dc of the scallop. Work [ch 12, bow, ch 12, pc] 6 times. Each unit is 2 + 0.75 + 2 + 0.5 = 5.25 in (13.3 cm), so the six units add 31.5 in (80.0 cm). Sl st into a teardrop to finish.

Total: 32.5 in (82.6 cm).

Tension: Chain at your normal relaxed tension and count every chain. Pulling the chains tight is the most common reason strands end up uneven.

Checkpoint: Hang the header and let the strands hang free for an hour. All 9 teardrops should sit within 0.25 in (0.6 cm) of one another.

Border

Border gauge matches the header: 5 sc per inch (2.5 cm).

Bottom edge (scallops):

  • Row 7: With RS facing, join pink in the first sc of Row 6. Ch 1, sc in the first st, sk 2, 7 dc in the next st, sk 2, sc in the next st; repeat 25 times. (26 sc, 25 scallops)

Top edge (tabs):

  • Tab row: Join teal in the first free loop of the foundation ch. Ch 1, sc in each free loop, working (sc, ch 10, sl st in the same sc) in sts 1, 16, 31, 46, 61, 76, 91, 106, 121, 136, and 151. (151 sc + 11 ch-10 tabs)

Short sides:

  • With teal, work 9 sc evenly along each short end: 1 sc per sc row, 2 sc for the cl row, and 3 sc for the tr row. (9 sts per side)

Why the math works: 151 = (25 × 6) + 1, so the scallops end exactly at both edges. 151 = (10 × 15) + 1, so the tabs land every 3 in (7.6 cm). The strands sit every 3 scallops, or 18 sts, which is 3.6 in (9.1 cm). The outer strands are 144 sts apart: 28.8 in (73.2 cm).

Final Blocking

  1. Weave in all tails along matching-color stitches.
  2. Pin the header flat to 30.2 in × 3 in (76.7 cm × 7.6 cm), with a pin in each scallop point.
  3. Lay each ballerina flat. Pin the tutu to 3.25 in (8.3 cm) wide, and pin out each tutu scallop and the arm oval.
  4. Pin out the bow wings and flower petals.
  5. Mist everything until damp, not soaked.
  6. Let it dry completely, then unpin.
  7. Hang the curtain so the chains relax to their full length.

Final Quality-Control Checklist

  • The header is 30.2 in (76.7 cm) wide, with 25 even scallops and 11 tabs.
  • There are 9 strands, hanging from scallops 1, 4, 7, 10, 13, 16, 19, 22, and 25.
  • Every ballerina is 7.5 in (19.1 cm) tall, and the tutus lie flat.
  • All bows and flowers face forward.
  • The teardrops line up within 0.25 in (0.6 cm).
  • No tails show from the front.

Troubleshooting

  • The tutu cups or ruffles: Your ch-5 loops are too long or too tight. Rework them as ch 4, or loosen your chains.
  • The arm oval puckers: Your Row 2 sc are too tight. Go up one hook size for that row only.
  • The header is too short: Your sc is tight. Remake it with a larger hook. Don’t add stitches, or the 151-st repeat math will break.
  • The strands are uneven: Count the chains. If one strand is long, take out chains just above its teardrop.
  • The bows twist: Re-pin them while damp and steam them lightly.

Care

Hand wash in cool water, roll in a towel, and dry flat with light pinning. Re-block whenever the tutus lose their shape.

Teal and coral crochet curtain with ballerina-inspired motifs hanging in a sunlit bedroom window.

Final Notes

The measurement chain works in this order:

  1. Gauge (20 sc = 4 in / 10.2 cm) sets the header at 30.2 in (76.7 cm).
  2. The 151-stitch foundation divides cleanly into 15 flowers, 25 scallops, and 11 tabs.
  3. Strands every 18 sts give 3.6 in (9.1 cm) spacing.
  4. Chain gauge (6 ch = 1 in / 2.5 cm) makes every strand 32.5 in (82.6 cm) long.

If you check each step as you go, the dancers will hang evenly across your window.

Happy crocheting!

Leave a Comment