Rosy Scallop Fan Plastic Bag Holder Crochet Pattern

This plastic bag holder is a tall, open-lace tube covered in staggered fans, each topped by a curved scallop arch, so the whole surface looks like soft fish scales. A small opening at the bottom closes with a chain-cord bow. At the top, a solid ribbed band and a sturdy hanging strap finish the piece.

The sample is worked in a warm dusty rose cotton, and the same pattern looks just as fresh in olive green. The style suits a cottage kitchen. It is pretty enough to hang on a cabinet knob in plain view and strong enough to hold a full stash of grocery bags.

The pattern uses US crochet terms. The finished tube measures about 4.5 in (11.4 cm) wide when laid flat, 9 in (22.9 cm) around, and 14.5 in (36.8 cm) tall, with a 9 in (22.9 cm) hanging strap.

The construction is simple and has no seams. You start at the bottom opening with a chain ring and increase for a rounded base. Next you work the fan-and-scallop lace in joined rounds, level the top, and add a ribbed band. The strap is worked directly onto the band. Last, you weave a separate chain drawstring through the base and tie it in a bow.

Finished Size and Construction

  • Finished size: 4.5 in (11.4 cm) wide flat, 9 in (22.9 cm) around, 14.5 in (36.8 cm) tall
  • Skill level: Easy-intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 1 body (strap worked on) + 1 drawstring chain
  • Layout: Single tube, worked from the bottom up in joined rounds
  • Piece size: 9 in (22.9 cm) around, 14.5 in (36.8 cm) tall
  • Size before top band: 13 in (33.0 cm) tall
  • Top band depth: 1.5 in (3.8 cm)

Materials

Choose a smooth worsted-weight cotton or cotton blend. Cotton holds the fan shape, doesn’t stretch much under the weight of the bags, and washes well. Avoid very fuzzy yarns, which blur the lace.

  • Dusty rose (main color): about 70 g / 125 m (137 yd)
  • Optional second colorway, olive green: the same 70 g / 125 m (137 yd) per holder

Tools:

  • 5.0 mm (H-8) crochet hook
  • Stitch marker
  • Tapestry needle
  • Scissors
  • Measuring tape
  • Rust-proof pins and a towel for blocking

The yarn amounts include a margin of about 20% to allow for your gauge swatch and for differences in tension.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • BLO – back loop only
  • st(s) – stitch(es)
  • sp – space
  • rep – repeat

Special stitch – Fan: Work (dc, ch 1) 4 times, then 1 more dc, all in the same stitch. One fan = 5 dc and 4 ch-1 sps.

Gauge and Checkpoints

  • Solid sc: 16 sts and 16 rounds = 4 in (10.2 cm)
  • Lace: 1 pattern repeat = 1.5 in (3.8 cm) wide; Rounds 5–8 (2 tiers) = 2 in (5.1 cm) tall
  • Band: 16 hdc = 4 in (10.2 cm); 4 hdc rounds + 1 sc round = 1.5 in (3.8 cm)

To check your gauge, work the base and the first two lace tiers (Rounds 1–8). These rounds are the actual start of the holder, so nothing is wasted if your gauge is correct.

Checkpoints:

  1. After Round 1: the opening is about 4.5 in (11.4 cm) around, roughly 1.4 in (3.6 cm) across.
  2. After Round 4: the edge is 9 in (22.9 cm) around, about 2.9 in (7.4 cm) across.
  3. After Round 8: 3 in (7.6 cm) tall from the bottom edge, still 9 in (22.9 cm) around.
  4. After Round 26: 12 in (30.5 cm) tall.
  5. After Round 28: 13 in (33.0 cm) tall.
  6. After Round 33: 14.5 in (36.8 cm) tall.

If the piece is too big, go down one hook size (4.5 mm). If it is too small, or the fans curl inward, go up one size (5.5 mm). Change the hook, not the stitch counts, because the 6-repeat structure depends on them.

Detailed closeup of mauve crocheted lace showing interlocking yarn stitches forming a diamond openwork pattern.

Body

Base

Foundation: Ch 18 and join with a sl st in the first ch to form a ring. Make sure the chain isn’t twisted.

Round 1: Ch 1, sc in each ch around, join with a sl st in the first sc. (18 sc)

Round 2: Ch 1, *sc in next 2 sts, 2 sc in next st; rep from * 5 more times, join. (24 sc)

Round 3: Ch 1, *sc in next 3 sts, 2 sc in next st; rep from * 5 more times, join. (30 sc)

Round 4: Ch 1, *sc in next 4 sts, 2 sc in next st; rep from * 5 more times, join. (36 sc)

The base is a shallow ring around the bottom opening. Once the bags are inside, it rounds out into the soft, curved bottom you see on the finished holder.

Fan and Scallop Lace

Round 5 (first fan round): Ch 1, sc in same st as join, *skip 2 sts, Fan in next st, skip 2 sts, sc in next st; rep from * 4 more times, skip 2 sts, Fan in next st, skip 2 sts, join with a sl st in the first sc. (6 fans, 6 sc)

Each repeat uses 6 sts of Round 4: 1 sc + 2 skipped + 1 fan st + 2 skipped. Six repeats use all 36 sts.

Round 6 (scallop round): Ch 1, *sc in sc, sc in first dc of fan, (sc in ch-1 sp, sc in next dc) 4 times; rep from * 5 more times, join. (60 sc: 6 repeats of 10 sc)

This round builds the curved arch over each fan, 9 sc per arch. The single sc between two arches marks the low point where the next fan will sit.

Round 7 (offset fan round): Sl st in next 5 sts to reach the center sc of the first arch (the 6th sc of the repeat). Ch 1, sc in same st, *skip next 4 sc, Fan in next sc (the low sc between arches), skip next 4 sc, sc in next sc (center of next arch); rep from * 4 more times, skip next 4 sc, Fan in next sc, skip next 4 sc, join with a sl st in the first sc. (6 fans, 6 sc)

Each repeat uses 10 sc of Round 6: 1 sc + 4 skipped + 1 fan st + 4 skipped. The new fans sit between the fans of the tier below, which creates the staggered scale look.

Round 8 (scallop round): Work as Round 6. (60 sc)

Rounds 9–26: Repeat Rounds 7–8 nine more times. You now have 11 complete tiers of fans and scallops. Round 26 ends with 60 sc.

Checkpoint: 12 in (30.5 cm) tall from the bottom edge, 9 in (22.9 cm) around.

Round 27 (final fan round): Work as Round 7. (6 fans, 6 sc)

Leveling Round

Round 28: Ch 1, *tr in sc, hdc in first dc of fan, sc in each of next 3 dc, hdc in last dc of fan; rep from * 5 more times, skipping all ch-1 sps, join. (36 sts)

This is a conversion round. The count is 1 tr in each of the 6 sc (6 sts) + 5 sts across each of the 6 fans (30 sts) = 36 sts. No stitches go into the ch-1 sps. This closes the spokes and brings the edge back to the 36-st count of the base. Each tr fills the low point between two fans, so the top edge sits straight.

Checkpoint: 13 in (33.0 cm) tall.

Top Band (Border)

The top band is the border of this piece. It is a solid ribbed edge that gives the opening structure and anchors the strap.

Border gauge: 16 hdc = 4 in (10.2 cm). Four hdc rounds plus one sc round = 1.5 in (3.8 cm).

When you flatten the tube, each side (front and back) has 18 sts. The folds fall between sts 36 and 1 and between sts 18 and 19. Because this is a tube, there are no corner stitches to count.

Round 29: Ch 2 (does not count as a st), hdc in BLO of each st around, join to first hdc. (36 hdc: 18 per flattened side)

Rounds 30–32: Repeat Round 29. (36 hdc each round: 18 per side)

Round 33: Ch 1, sc in both loops of each st around, join. (36 sc: 18 per side)

Don’t fasten off. Go straight on to the strap.

Why the math works: The band keeps the same 36 sts as Rounds 4 and 28, so the tube doesn’t flare out or pull in at the top. At 4 sts per inch, 36 sts = 9 in (22.9 cm) around, and 18 sts per side = 4.5 in (11.4 cm) flat width, which matches the finished size exactly.

Hanging Strap

Flatten the tube so the round joins line up along one side fold. You’ll work the strap over the 4 sts at that fold and attach it to the 4 sts at the opposite fold.

Row 1: Ch 1, sc in sts 1, 2, 3, and 4 of Round 33. (4 sc)

Rows 2–36: Ch 1, turn, sc in each st across. (4 sc each row)

Checkpoint: the strap is 1 in (2.5 cm) wide and 9 in (22.9 cm) long.

Attach: Without twisting the strap, bring Row 36 over to the opposite side of the band. Hold it against sts 19, 20, 21, and 22 of Round 33. Work a sl st through each strap st and its matching band st together. (4 sl sts) Fasten off and weave in the ends.

Drawstring

Ch 88, which is about 22 in (55.9 cm). Fasten off, leaving 2 in (5.1 cm) tails. Tie an overhand knot at each end and trim the tails.

Starting at the center front, weave the drawstring through Round 2, going over 2 sts and under 2 sts all the way around. With 24 sts, that makes 12 passes. Bring both ends out on the front, next to each other. Pull until the opening is about 1.25 in (3.2 cm) across, then tie a bow.

Final Blocking

  1. Untie the drawstring and pull it out.
  2. Soak the holder in cool water for 10 minutes, then gently press out the water. Don’t wring it.
  3. Roll it in a towel to remove excess moisture.
  4. Stuff the tube loosely with a rolled towel so it keeps a 9 in (22.9 cm) circumference.
  5. Lay it flat and use your fingers to smooth each fan into an even, open shape.
  6. Pin the strap straight at 1 in (2.5 cm) wide and 9 in (22.9 cm) long.
  7. Let it dry completely, then rethread the drawstring.

Final Quality-Control Checklist

  • Round 4, Round 28, and every band round each have 36 sts.
  • Every fan round has 6 fans and 6 sc.
  • Every scallop round has 60 sc.
  • Each tier of fans is offset from the tier below.
  • The top edge sits level, with no dips at the tr points.
  • The tube measures 4.5 in (11.4 cm) flat and 14.5 in (36.8 cm) tall.
  • The strap isn’t twisted and is attached at opposite sides.
  • The drawstring is woven evenly and both ends come out together.
  • All ends are woven in securely.

Troubleshooting

The fans lean to one side. The round joins are drifting as you go. Make sure each offset fan round starts with exactly 5 sl sts to reach the arch center.

The tube flares out. Your lace is looser than your sc. Use a hook one size smaller for the fan rounds only.

The scallops look flat. Make sure each arch has 9 sc, one in every dc and every ch-1 sp, and pull each sc snug.

The top edge waves. Recount Round 28. It must have exactly 36 sts, with no stitches in the ch-1 sps.

The strap stretches. Work the strap with a hook one size smaller, or with a doubled strand of yarn.

Bags fall out of the bottom. Tighten the bow, or weave the drawstring through Round 1 instead.

Care

Machine wash cool on a gentle cycle inside a mesh bag, then reshape and lay flat to dry. Avoid hot dryers, which can shrink cotton and distort the fans.

Dusty rose crochet basket with lace detail displayed on wooden table in bright, sunlit contemporary room.

Final Notes

The measurements build on each other in a simple chain. A 36-st base gives 9 in (22.9 cm) around. Six lace repeats at 1.5 in (3.8 cm) each keep that circumference. Each tier adds 1 in (2.5 cm), so the tube reaches 12 in (30.5 cm) after Round 26 and 13 in (33.0 cm) after the leveling round. The 1.5 in (3.8 cm) band brings it to 14.5 in (36.8 cm). If each checkpoint matches, the holder will hang neatly and hold plenty of bags.

Happy crocheting!

Leave a Comment