The Royal Guard Nutcracker Armchair Caddy turns a sofa arm into a festive little organizer. A navy back panel holds six burgundy pockets with cream cuffs. A classic nutcracker head stands above the top edge, with a tall black hat, gold laurel and a red jewel.
The colors are traditional and rich: navy, burgundy, cream, black, metallic gold, green, red and peach. Gold trim ties everything together, from the twisted border to the fringed epaulettes and the holly-vine tassels.
This pattern uses US crochet terms. The finished bordered panel measures 13 x 14 in (33.0 x 35.6 cm). With the head, the total height is about 18.5 in (47.0 cm).
The construction is modular. You work the panel sideways in single crochet through the back loop and add a three-round border. Then you make the pockets and appliqués separately and sew everything in place.
Finished Size and Construction
- Finished panel size: 13 x 14 in (33.0 x 35.6 cm)
- Overall height with head: about 18.5 in (47.0 cm)
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4)
- Hooks: 5.0 mm (H-8) for the panel and pockets; 4.0 mm (G-6) for the appliqués
- Number of pieces: 1 panel, 6 pockets, 1 head set, 1 collar, 2 epaulettes, 2 holly vines, 2 tassels
- Layout: pockets in 2 rows of 3
- Pocket size: 3.5 x 4 in (8.9 x 10.2 cm)
- Panel size before border: 12 x 13 in (30.5 x 33.0 cm)
- Border depth: 0.5 in (1.3 cm) per side
Materials
Choose a smooth worsted acrylic or acrylic blend that holds its shape. For gold, use a metallic worsted, or hold a fine metallic thread together with gold worsted.
- Navy: 120 g / 216 m
- Burgundy: 60 g / 108 m
- Cream: 25 g / 45 m
- Black: 15 g / 27 m
- Metallic gold: 40 g / 72 m
- Green: 15 g / 27 m
- Red: 10 g / 18 m
- Peach: 10 g / 18 m
Tools:
- 5.0 mm (H-8) and 4.0 mm (G-6) hooks
- Tapestry needle
- 9 gold shank buttons, 0.5 in (1.3 cm)
- Stitch markers and pins
- 3 in (7.6 cm) piece of cardboard for the tassels
- Blocking mat and spray bottle
All quantities include a margin of about 15 percent for swatching and sewing.
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sc2tog / sc3tog: single crochet 2 / 3 together
- BLO: back loop only
- rev sc: reverse single crochet
- st(s): stitch(es)
Special stitch: reverse single crochet (rev sc). Work from left to right. Insert the hook in the next st to the right, yarn over and pull up a loop. Yarn over again and pull through both loops. This makes the twisted cord edge.
Gauge and Checkpoints
- 5.0 mm hook, sc BLO: 16 sts and 18 rows = 4 in (10.2 cm).
- 4.0 mm hook, sc: 18 sts and 20 rows = 4 in (10.2 cm).
Make one pocket first as your test piece. It should measure 3.5 in (8.9 cm) wide and 4 in (10.2 cm) tall. If it matches, your panel will match too.
Panel checkpoints:
- Row 18: 4 in (10.2 cm) wide
- Row 36: 8 in (20.3 cm) wide
- Row 54: 12 in (30.5 cm) wide
- Height throughout: 13 in (33.0 cm)
If your piece is too big, go down a hook size. If it is too small, go up a hook size. Do not change the stitch counts.

Back Panel
You work the panel sideways, so the BLO ridges run vertically.
With navy and the 5.0 mm hook, ch 53.
Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (52 sts)
Rows 2–54: Ch 1, sc BLO in each st across. Turn. (52 sts)
Fasten off. Check that the panel measures 12 x 13 in (30.5 x 33.0 cm). The foundation chain and the last row form the side edges. The row ends form the top and bottom edges.
Pockets (Make 6)
With burgundy and the 5.0 mm hook, ch 13.
Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (12 sts)
Row 2: Ch 1, 2 sc in first st, sc in next 10 sts, 2 sc in last st. Turn. (14 sts)
Rows 3–15: Ch 1, sc in each st across. Turn. (14 sts)
Change to cream.
Rows 16–18: Ch 1, sc BLO in each st across. Turn. (14 sts)
Fasten off. The increases in Row 2 round off the bottom corners.
Swag trim: With gold and the 4.0 mm hook, work surface sl sts in a shallow wave across Row 11, dipping to Row 10 at the center. Sew a gold button at the center dip.
Checkpoint: 3.5 x 4 in (8.9 x 10.2 cm).
Nutcracker Head
Use the 4.0 mm hook for all head pieces.
Face
With peach, ch 7.
Rnd 1: Sc in 2nd ch from hook, sc in next 4 ch, 3 sc in last ch. Working along the other side of the chain, sc in next 4 ch, 2 sc in first ch. Join. (14 sts)
Rnd 2: Ch 1, 2 sc in first st, sc in next 4, 2 sc in each of next 3, sc in next 4, 2 sc in each of last 2. Join. (20 sts)
Rnd 3: Ch 1, (sc in next, 2 sc in next) once, sc in next 4, (sc in next, 2 sc in next) 3 times, sc in next 4, (sc in next, 2 sc in next) twice. Join. (26 sts)
Rnd 4: Ch 1, (sc in next 2, 2 sc in next) once, sc in next 4, (sc in next 2, 2 sc in next) 3 times, sc in next 4, (sc in next 2, 2 sc in next) twice. Join. (32 sts)
Fasten off. The face measures about 3 x 2 in (7.6 x 5.1 cm). Place it with the long side horizontal.
Nose
With peach, ch 2. Work 5 dc in 2nd ch from hook, then sl st to the first dc to close it into a bobble. Sew it to the center of the face.
Hat
With burgundy, ch 15.
Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (14 sts)
Rows 2–3: Ch 1, sc in each st. Turn. (14 sts)
Change to black.
Rows 4–8: Ch 1, sc in each st. Turn. (14 sts)
Row 9: Ch 1, 2 sc in first st, sc in next 12, 2 sc in last st. Turn. (16 sts)
Rows 10–15: Ch 1, sc in each st. Turn. (16 sts)
Fasten off. The hat flares to about 3.5 in (8.9 cm) at the top and stands 3 in (7.6 cm) tall. With gold, work surface sl sts along the top and bottom of the burgundy band.
Jewel
With red, ch 4. Sc in 2nd ch from hook, sc in next ch, 3 sc in last ch. Working along the other side, sc in next ch, 2 sc in first ch. (8 sts) Change to gold and sl st in each st around. (8 sts)
Sew the jewel to the center of the hat. Embroider two gold laurel sprays in lazy daisy stitch, fanning out from the jewel.
Curls (Make 8)
With cream, ch 10. Work 3 sc in 2nd ch from hook and in each remaining ch. (27 sts) The strip twists into a corkscrew. Coil it into a flat rosette and tack it in place.
Mustache
With cream, ch 13. Starting in 2nd ch from hook, work: sl st, sc, hdc, dc, hdc, sc, sl st (center), sc, hdc, dc, hdc, sc. (12 sts)
Beard
With cream, ch 6.
Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (5 sts)
Row 2: Ch 1, sc2tog, sc, sc2tog. Turn. (3 sts)
Row 3: Ch 1, sc3tog. (1 st) Fasten off.
Assemble the Head
- Sew the hat over the top 0.25 in (0.6 cm) of the face.
- Sew 4 curls down each side of the face.
- Add the mustache under the nose, then the beard below it with the point facing down.
- Embroider black eyes and cream eyebrows. Use one split ply of red for the cheeks.
Collar and Epaulettes
Collar
With burgundy and the 4.0 mm hook, ch 21.
Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (20 sts)
Rows 2–7: Ch 1, sc2tog, sc to last 2 sts, sc2tog. Turn. (18, 16, 14, 12, 10, 8 sts)
Row 8: Ch 1, sc in each st across. (8 sts) Fasten off.
Edging: Join gold and sc around the collar:
- Top edge: 3 sc in each corner st and 1 sc in each of the other 18 sts. (24 sts)
- Slanted sides: 8 sc down each side. (16 sts)
- Bottom edge: 3 sc in each corner st and 1 sc in each of the other 6 sts. (12 sts)
Join. (52 sts) Sew 3 gold buttons down the center of the collar.
Epaulettes (Make 2)
With gold and the 4.0 mm hook, ch 10.
Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (9 sts)
Rows 2–4: Ch 1, sc in each st. Turn. (9 sts)
Row 5: Ch 1, sc2tog, sc in next 5, sc2tog. (7 sts) Do not fasten off.
Fringe: Work along the foundation chain. Repeat 9 times: sl st in next st, ch 6, sl st in 2nd ch from hook and in each ch back to the edge. (9 strands)
Each epaulette is about 2 x 2.25 in (5.1 x 5.7 cm).
Holly Vines and Tassels
Vines (make 2): With green, ch 36, about 7 in (17.8 cm).
Leaves (make 12): With green, ch 7. Starting in 2nd ch from hook, work sc, hdc, dc, dc, hdc, sc. Ch 1. Along the other side of the chain, work sc, hdc, dc, dc, hdc, sc. Sl st to the tip. (12 sts) Sew 6 leaves in pairs along each vine.
Berries (make 12): With red, ch 2, work 4 sc in 2nd ch from hook, sl st to close. Gather the tail to form a ball. Sew 3 berries at each of 2 points on each vine.
Tassels (make 2): Wrap gold 30 times around the 3 in (7.6 cm) card. Tie the top, cut the bottom loops and wrap the neck.
Tassel caps (make 2): With gold, make a magic ring.
- Rnd 1: 6 sc in ring. (6 sts)
- Rnd 2: 2 sc in each st. (12 sts)
- Rnd 3: Sc2tog 6 times. (6 sts)
Stuff with yarn scraps, close the top and sew the cap above the tassel. Attach one tassel to the bottom of each vine.
Make All Pieces
Pieces by color:
- Navy: 1 panel, plus border Rnds 1–2
- Burgundy: 6 pockets, 1 collar, 1 hat band
- Cream: 6 pocket cuffs, 8 curls, mustache, beard, eyebrows
- Black: 1 hat
- Gold: border Rnd 3, 2 epaulettes, 2 tassels with caps, all trims
- Green: 2 vines, 12 leaves
- Red: 12 berries, 1 jewel, cheeks
- Peach: face, nose
Layout (panel body, before border):
[ HEAD ]
[EPAULETTE] [COLLAR] [EPAULETTE]
[ A1 ] [ A2 ] [ A3 ]
[ B1 ] [ B2 ] [ B3 ]
holly vine + tassel on each side edge
Across: 0.5 in margin + 3.5 in pocket + 0.25 in gap + 3.5 in pocket + 0.25 in gap + 3.5 in pocket + 0.5 in margin = 12 in (30.5 cm). In cm that is 1.3 + 8.9 + 0.6 + 8.9 + 0.6 + 8.9 + 1.3 cm.
Down: 3 in (7.6 cm) top space + 4 in (10.2 cm) pocket + 0.75 in (1.9 cm) gap + 4 in (10.2 cm) pocket + 1.25 in (3.2 cm) bottom margin = 13 in (33.0 cm).
Joining
Work the Border (next section) on the panel first. Then sew all the pieces on.
- Pin all six pockets in place using the layout measurements.
- With burgundy, whipstitch each pocket’s sides and bottom to the panel. Leave the cream cuff open.
Stitch-to-stitch logic: Each pocket side has 18 rows. The same height on the panel spans 16 sts (4 in at 4 sts per in). Catch one panel stitch for each pocket row, and skip one pocket row about every 9 rows. Along the bottom, the pocket’s 14 sts sit over about 16 panel ridges. Catch one ridge per stitch and add one extra ridge about every 7 sts.
Tension: Sew snugly but not tightly. Each pocket should lie flat without rippling.
Next, attach the rest of the pieces:
- Sew the collar centered at the top edge, overlapping the panel by 0.75 in (1.9 cm).
- Sew the epaulettes at the top corners.
- Sew the head to the back of the panel top so it rises about 4.5 in (11.4 cm) above the edge. The beard should overlap the collar.
- Sew one vine down each side border, starting 3.25 in (8.3 cm) from the top.
Checkpoint: The panel still measures 13 x 14 in (33.0 x 35.6 cm), and the overall height is about 18.5 in (47.0 cm).
Border
You work the border on the panel only. It follows the panel gauge: 4 sts per in along the side edges, and 4 sc per 4.5 row ends along the top and bottom.
Rnd 1 (navy): Join in a corner. Along each 52-st side edge, work 3 sc in the first st, 1 sc in each of the next 50 sts and 3 sc in the last st. Along the top and bottom edges, work 48 sc evenly across the 54 row ends. Join. That gives 50 sts on each side, 48 sts on the top and on the bottom, plus 4 corner groups of 3, for a total of 208 sts.
Rnd 2 (navy): Ch 1, sc in each st, working 3 sc in the center st of each corner. Join. Between corners there are 52 sts on each side and 50 sts on the top and on the bottom. With 4 corners of 3 sts, the total is 216 sts.
Rnd 3 (gold): Ch 1, rev sc in each st around. Join. (216 sts)
Why the math works: 54 rows at 4.5 rows per in equal 12 in, and 48 sc at 4 sts per in also equal 12 in, so the top and bottom do not ruffle. Each round adds 2 sts to every side run, and the corner increases keep the corners flat. The three rounds add 0.5 in (1.3 cm) per side, for a finished size of 13 x 14 in (33.0 x 35.6 cm).
Final Blocking
- Pin the panel to 13 x 14 in (33.0 x 35.6 cm) before you sew on the appliqués.
- Mist it with water until damp, not soaked.
- Straighten the vertical ridges and square the corners.
- Let it dry completely.
- Pin and mist the face, hat and collar separately so their edges lie flat.
- Never use high heat on metallic yarn.
Final Quality-Control Checklist
- The panel measures 12 x 13 in (30.5 x 33.0 cm) before the border.
- The border counts are 208, 216 and 216.
- All 6 pockets measure 3.5 x 4 in (8.9 x 10.2 cm).
- The pocket tops are open and evenly aligned.
- Rnd 4 of the face has 32 sts.
- The hat is centered and the jewel is straight.
- Each epaulette has 9 fringe strands.
- Each vine has 6 leaves, 6 berries and a tassel.
- All ends are securely woven in.
Troubleshooting
- Panel ruffles at the top or bottom: There are too many sc in the row ends. Recount to 48.
- Corners cup: Check that each corner has exactly 3 sc.
- Pockets gape: Sew the side seams 1 st tighter, then block.
- Face is too pointy: Make sure the increases are only at the two ends.
- Fringe curls: Mist the strands and pin them straight while they dry.
- Head flops forward: Add a second line of stitches across the back of the face.
Care
Spot clean, or hand wash in cool water and lay flat to dry. Reshape the fringe and tassels while they are damp.

Final Notes
Everything follows one chain of measurements:
- A gauge of 16 sts and 18 rows per 4 in (10.2 cm) gives a 12 x 13 in (30.5 x 33.0 cm) panel.
- The 0.5 in (1.3 cm) border brings it to 13 x 14 in (33.0 x 35.6 cm).
- Six 3.5 x 4 in (8.9 x 10.2 cm) pockets fit the layout exactly.
- The head adds 4.5 in (11.4 cm), for a total height of about 18.5 in (47.0 cm).
Happy crocheting!