Sage Chevron Hanging Toilet Paper Holder Crochet Pattern

This hanging holder keeps three spare toilet paper rolls tidy and in reach. It’s a long sage-green panel with rounded ends, three oval baskets stacked down the front, and a short tab looped through a wooden ring for hanging.

Each basket has two cream chevron bands worked in tapestry single crochet, with a firm rolled rim on top. The panel is plain sage green so the zigzags stand out. The style is calm and modern farmhouse, and it suits a hook beside the vanity or on the back of a door.

The pattern uses US crochet terms. The finished holder measures 8 in (20.3 cm) wide by 26.5 in (67.3 cm) long, not counting the ring. Each basket is about 7 in (17.8 cm) wide, 5 in (12.7 cm) deep, and 4 in (10.2 cm) tall.

You’ll make the panel as a long oval in rounds around a foundation chain. Then you’ll make three oval baskets with turned-up chevron walls and a hanging tab. Finally, you’ll border the panel, sew on the baskets, add the tab and ring, and block.

Finished Size and Construction

  • Finished size: 8 in (20.3 cm) wide x 26.5 in (67.3 cm) long, excluding ring
  • Skill level: Intermediate (tapestry colorwork, working in rounds)
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 5 (1 panel, 3 baskets, 1 tab), plus 1 wooden ring
  • Layout: 3 baskets stacked vertically, centered on the panel
  • Basket size: 7 in (17.8 cm) x 5 in (12.7 cm) base, 4 in (10.2 cm) tall
  • Panel size before border: 7.5 in (19.1 cm) x 26 in (66.0 cm)
  • Border depth: 0.25 in (0.6 cm) per edge

Materials

Use a smooth worsted cotton or cotton blend. Cotton keeps the basket walls firm and stands up to bathroom humidity. Avoid fuzzy or very stretchy yarns because they blur the chevrons and let the baskets sag.

  • Color A, sage green: 250 g / 425 m (465 yd)
  • Color B, cream: 60 g / 102 m (112 yd)

These quantities include a margin of about 25% for your gauge swatch and tension differences.

Tools:

  • 4.5 mm (US 7) crochet hook
  • 1 wooden ring, 3 in (7.6 cm) outer diameter
  • Stitch markers (at least 6)
  • Tapestry needle
  • Scissors
  • Measuring tape
  • Blocking mat and rustproof pins
  • Spray bottle

Abbreviations (US Terms)

  • ch: chain
  • sc: single crochet
  • sl st: slip stitch
  • st(s): stitch(es)
  • BLO: back loop only
  • rev sc: reverse single crochet (crab stitch)
  • A / B: Color A / Color B

Special stitch, tapestry sc: Lay the unused color along the tops of the stitches and work each sc over it so the strand is hidden inside. To change color, work the last sc before the change until 2 loops remain on the hook, then yarn over with the new color and pull through.

Rev sc: Working from left to right, insert the hook into the next st to the right, yarn over, pull up a loop, then yarn over and pull through both loops.

Gauge and Checkpoints

Gauge: 14 sc and 16 rounds = 4 in (10.2 cm) in plain sc. That’s 3.5 sts and 4 rounds per inch.

Test one piece first. Work Rounds 1–9 of a basket base and measure it before you go on.

Checkpoints:

  • Basket base, Round 1: about 2.5 in (6.4 cm) long x 0.5 in (1.3 cm) wide
  • Basket base, Round 9: 7 in (17.8 cm) x 5 in (12.7 cm)
  • Basket wall after Round 24: 3.75 in (9.5 cm) tall from the ridge
  • Panel, Round 1: about 19 in (48.3 cm) long
  • Panel, Round 14: 7.5 in (19.1 cm) x 26 in (66.0 cm)
  • Tab: 1.75 in (4.4 cm) x 5.5 in (14.0 cm)

If your piece is too big, go down a hook size. If it’s too small, go up a hook size. Each round should add 0.5 in (1.3 cm) to both the length and the width. If a base ruffles, your stitches are too tight, so go up a size. If it cups, go down a size.

Sage green crocheted fabric with textured popcorn stitch detail, draped over a natural wooden ring.

Panel (Make 1, Color A)

The panel is a stadium-shaped oval worked in joined rounds. Each round adds 3 increases at each end.

Ch 68.

Round 1: 3 sc in 2nd ch from hook, sc in next 65 ch, 3 sc in last ch. Rotate and work along the opposite side of the chain: sc in next 65 ch. Sl st to first sc. (136 sts: 3 per end, 65 per long side)

Place a marker in the first and last st of each 3-st end group. Move the markers up every round.

Round 2: Ch 1. [2 sc in next st] 3 times, sc in next 65, [2 sc in next st] 3 times, sc in next 65. Sl st to first sc. (142 sts: 6 per end)

Rounds 3–14: Ch 1. Across the end group: [sc in next (round number minus 2) sts, 2 sc in next st] 3 times. Sc in next 65. Repeat the end group, then sc in next 65. Sl st to first sc.

Each round’s total is 130 + (6 x round number):

  • Round 3: 148 sts (9 per end)
  • Round 6: 166 sts (18 per end)
  • Round 10: 190 sts (30 per end)
  • Round 14: 214 sts (42 per end, 65 per long side)

Fasten off and set the panel aside. You’ll add the border later, before assembly.

Basket (Make 3)

Base (Color A)

Ch 10.

Round 1: 3 sc in 2nd ch from hook, sc in next 7 ch, 3 sc in last ch. Rotate and work along the opposite side of the chain: sc in next 7 ch. Sl st to first sc. (20 sts: 3 per end, 7 per long side)

Round 2: Ch 1. [2 sc in next st] 3 times, sc in next 7, [2 sc in next st] 3 times, sc in next 7. Sl st to first sc. (26 sts)

Rounds 3–9: Ch 1. Work as for the panel: across each end, [sc in next (round number minus 2) sts, 2 sc in next st] 3 times, and sc in each of the 7 sts on each long side. Sl st to first sc.

Each round’s total is 14 + (6 x round number):

  • Round 3: 32 sts
  • Round 5: 44 sts
  • Round 7: 56 sts
  • Round 9: 68 sts (27 per end, 7 per long side)

Check the base against the 7 in (17.8 cm) x 5 in (12.7 cm) checkpoint.

Walls

Round 10 (turning ridge and conversion round): Ch 1. Working in BLO, [sc in next 16, 2 sc in next st] 4 times. Sl st to first sc. (68 sts worked 1 per existing st + 4 increases = 72 sts)

The unworked front loops form a crisp ridge, and the walls now rise straight up. The 72 sts give 12 repeats of the 6-st chevron.

Rounds 11–12: With A, ch 1, sc in each st around, sl st to first sc. (72 sts)

Rounds 13–16, chevron band 1: Work in tapestry sc, carrying the unused color. Each bracket is one 6-st repeat, worked 12 times per round. Every round has 72 sts.

  • Round 13: [1 B, 4 A, 1 B]
  • Round 14: [2 B, 2 A, 2 B]
  • Round 15: [1 A, 4 B, 1 A]
  • Round 16: [2 A, 2 B, 2 A]

These four rounds stack into a cream zigzag 2 rounds thick. It points down between repeats and peaks at the center of each repeat.

Rounds 17–18: With A only, sc in each st around. (72 sts) Don’t cut B. Keep carrying it inside the wall.

Rounds 19–22, chevron band 2: Repeat Rounds 13–16. (72 sts each round)

Rounds 23–24: With A, sc in each st around. (72 sts) Cut B and weave it in. Check the wall height: it should be 3.75 in (9.5 cm) from the ridge.

Round 25 (rim): With A, ch 1, rev sc in each st around. Sl st to first st. (72 sts) The rim brings the wall to 4 in (10.2 cm).

Fasten off and weave in the ends. The color jog sits on a short end, where it won’t be seen.

Hanging Tab (Make 1, Color A)

Ch 7.

Row 1: Sc in 2nd ch from hook and in each ch across. (6 sts)

Rows 2–22: Ch 1, turn, sc in each st across. (6 sts)

The tab measures 1.75 in (4.4 cm) x 5.5 in (14.0 cm). Fasten off, leaving a 16 in (40.6 cm) tail.

Make All Pieces

  • Color A: 1 panel, 3 basket bases with their plain wall rounds, 1 tab
  • Color B: chevron bands only, 8 rounds per basket, 24 rounds total

Layout (front view, top to bottom):

        ( ring )
          |tab|
   .-----------------.
   |  top of panel   |
   |  [ Basket 1 ]   |  rim at 5.5 in
   |                 |
   |  [ Basket 2 ]   |  rim at 13.5 in
   |                 |
   |  [ Basket 3 ]   |  rim at 21.5 in
   |                 |
   '-----------------'

Joining

Method: Whipstitch with Color A and a tapestry needle. Sew each basket along two lines: at the rim and at the base ridge.

Placement: Measuring down from the top edge of the bordered panel, place the basket rims at 5.5 in (14.0 cm), 13.5 in (34.3 cm), and 21.5 in (54.6 cm). Each basket’s bottom sits 4 in (10.2 cm) below its rim. That leaves 4 in (10.2 cm) of clear panel between baskets and 1 in (2.5 cm) below the last one.

Stitch-to-stitch logic: Flatten one long side of the basket against the panel, keeping the color jog on a short end. Mark 21 sts centered on that side. The panel’s rounds run across its width at 4 rounds per inch, and the basket has 3.5 sts per inch, so 7 basket sts match 8 panel rounds.

Work [whipstitch 1 basket st to 1 panel round] 6 times, then whipstitch 1 basket st through 2 panel rounds. Repeat this 3 times. That joins 21 basket sts to 24 panel rounds, which covers 6 in (15.2 cm) at the center of the panel.

Sew the rim line first, through both loops of the rev sc rim. Then sew the matching 21 front loops on the turning ridge, directly below.

Tension: Pull the yarn snug so the basket sits flat, but not so hard that the panel puckers. Lay the piece flat after each basket and check that the panel still measures 8 in (20.3 cm) across.

Tab: Fold the tab over the ring. Sew 1 in (2.5 cm) of one end to the front of the panel’s top center and 1 in (2.5 cm) of the other end to the back, sandwiching the panel edge between them.

Size checkpoint: The assembled holder measures 8 in (20.3 cm) x 26.5 in (67.3 cm), excluding the ring.

Border (Panel Only, Color A)

Work the border on the panel before you sew on the baskets.

Border gauge: The same as the body, 3.5 sts and 4 rounds per inch. The sc round adds 0.25 in (0.6 cm). The rev sc sits on top and adds almost no height.

Border Round 1 (growth round): Join A in the first st of an end group. Ch 1. Work this as Round 15: [sc in next 13, 2 sc in next st] 3 times, sc in next 65, [sc in next 13, 2 sc in next st] 3 times, sc in next 65. Sl st to first sc. (220 sts: 45 per end, 65 per long side)

Border Round 2: Ch 1, rev sc in each st around. Sl st to first st. (220 sts) Fasten off.

Why the math works: A flat sc circle needs 6 increases per round. The two rounded ends together make one circle, so 3 increases per end keeps them flat. The long sides are straight, so they stay at 65 sts. That’s why 214 + 6 = 220 fits: 2 x 65 + 2 x 45 = 220.

Final Blocking

  1. Weave in all ends securely, especially the B tails inside the baskets.
  2. Lay the holder face up on a blocking mat.
  3. Pin the panel to 8 in (20.3 cm) x 26.5 in (67.3 cm), easing the rounded ends into smooth curves.
  4. Put a toilet paper roll or a folded towel in each basket so the walls stay upright.
  5. Mist everything evenly with water until it’s damp but not soaked.
  6. Smooth the chevron bands with your fingers so the points line up.
  7. Let it dry completely, for at least 24 hours.
  8. Unpin and check all measurements again.

Final Quality-Control Checklist

  • The panel measures 8 in (20.3 cm) x 26.5 in (67.3 cm).
  • Both rounded ends lie flat, with no ruffling or cupping.
  • Each basket wall has 72 sts and a clean BLO ridge.
  • All 12 chevron repeats line up around each basket.
  • No carried B strands show on the outside.
  • The basket rims sit at 5.5 in (14.0 cm), 13.5 in (34.3 cm), and 21.5 in (54.6 cm).
  • The baskets are centered and level.
  • The tab is secure on both the front and the back.
  • All ends are woven in.

Troubleshooting

  • Panel ends ruffle: You have too many sts or your tension is tight. Go up a hook size, and check that each end has exactly 3 increases per round.
  • Panel ends cup: Increases were missed. Count each end group against 3 x round number.
  • Chevrons are lopsided: Recount each round in 6-st repeats. One missed st shifts every repeat after it.
  • Carried yarn shows through: Keep the carried strand snug along the st tops and work tighter sc.
  • Baskets droop forward: Add a third whipstitch line halfway up the back wall.
  • Panel puckers behind the baskets: The seam was pulled too tight. Undo it and sew it again more loosely.
  • Baskets too shallow for your rolls: Add 1 or 2 more plain A rounds before the rim.

Care

Hand wash in cool water with mild soap, press the water out in a towel, and dry flat with the baskets stuffed. Don’t tumble dry, because heat can shrink cotton and distort the chevrons.

Crocheted sage green wall organizer with cream stripes holding three rolls of white toilet paper, hanging beside a potted fern.

Final Notes

The whole holder follows one measurement chain. A gauge of 14 sc x 16 rounds = 4 in (10.2 cm) gives a 7 in (17.8 cm) x 5 in (12.7 cm) basket base at Round 9 and a 72-st wall with 12 chevron repeats. The panel reaches 7.5 in (19.1 cm) x 26 in (66.0 cm) at Round 14, and the border brings it to 8 in (20.3 cm) x 26.5 in (67.3 cm). Sewing 21 basket sts to 24 panel rounds keeps all three baskets centered and level.

If your swatch is right, every later step falls into place.

Happy crocheting!

Leave a Comment