The Sage Tulip Bag Holder is a tall, round plastic bag dispenser covered in rows of puffy tulip bobbles. Each tulip sits inside an open V of “leaf” stitches, and a solid single crochet stripe frames every tulip band. The top ends in a firm ribbed cuff with a narrow strap handle. A chain-cord drawstring tied in a bow closes the rounded bottom.
The sample is made in soft sage green cotton, which gives the tulips a gentle, vintage kitchen look. It works just as well in cream, white, or any solid color that shows off texture. This pattern uses US crochet terms throughout.
The finished holder is about 6 in (15.2 cm) wide when laid flat and 14 in (35.6 cm) tall from the bottom opening to the top edge. The strap adds about 9 in (22.9 cm).
The holder is made in one piece, in joined rounds, from the bottom up. You start with a chain ring that becomes the dispensing hole and increase to form a rounded cup. Then you work four tulip bands and finish with a ribbed cuff, a strap, and a drawstring.
Finished Size and Construction
- Finished size: 6 in (15.2 cm) wide flat x 14 in (35.6 cm) tall, plus strap
- Skill level: Intermediate (bobbles, post stitches, working into spaces)
- Terminology: US crochet terms
- Yarn weight: Worsted (#4) cotton or cotton blend
- Hook: 4.5 mm (US 7)
- Number of pieces: 1 body (the strap is worked directly onto it), plus 1 drawstring cord
- Layout: a single tube worked in the round, 48 stitches around
- Piece size before cuff: 6 in (15.2 cm) flat x 12.25 in (31.1 cm) tall
- Cuff (border) depth: 1.75 in (4.4 cm)
Materials
Choose a smooth worsted weight cotton. Cotton keeps the bobbles crisp and stops the tube from stretching when it’s full of bags. Acrylic also works but sags a little more.
- Sage green: 150 g, about 255 m (279 yd) of worsted cotton
- Optional cream (for a second holder): another 150 g, about 255 m (279 yd)
These amounts include a margin of about 25 percent. The sample used about 115 g.
Tools:
- 4.5 mm (US 7) crochet hook
- Locking stitch markers (at least 2)
- Tapestry needle
- Scissors
- Measuring tape
- Blocking mat and pins, or a rolled towel
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- fpdc – front post double crochet
- bpdc – back post double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- rnd – round
- rep – repeat
Special stitches:
- V-leaf: (dc, ch 3, dc) in the same st. The two dc lean apart to form the leaves, and the ch-3 sp holds the tulip.
- Tulip: [yarn over, insert hook in the indicated sp, yarn over and pull up a loop, yarn over and pull through 2 loops] 5 times in the same sp (6 loops on hook), yarn over and pull through all 6 loops, ch 1 to close. The closing ch 1 is the top of the tulip.
Gauge and Checkpoints
Gauge: 16 sc and 18 rnds = 4 in (10.2 cm) in sc worked in the round.
Before you commit, work Rnds 1–3 of the bottom and check the size. This small piece is your real gauge swatch, because it uses the same stitches and tension as the holder.
Checkpoints:
- After Rnd 1: the ring of 24 sc is about 6 in (15.2 cm) around, with an opening about 1.75 in (4.4 cm) across.
- After Rnd 3: the 48-st round is 12 in (30.5 cm) around, so it lies about 6 in (15.2 cm) wide when pressed flat. The base will cup, and that’s intended.
- After Rnd 4: the bottom section is about 1.25 in (3.2 cm) tall.
- After each tulip band (5 rnds): each band is about 2.75 in (7.0 cm) tall, and the width is still 6 in (15.2 cm).
- Before the cuff: 12.25 in (31.1 cm) tall.
If your piece is too big, go down a hook size (4 mm). If it’s too small, go up a size (5 mm). Being off by up to 0.5 in (1.3 cm) in flat width is fine. Bigger differences change how many bags the holder takes and how well the bow closes.

Bottom
Leave a 6 in (15.2 cm) tail.
Rnd 1: Ch 24, sl st in first ch to form a ring, taking care not to twist. Ch 1, sc in each ch around, sl st in first sc. (24 sc)
Rnd 2: Ch 1, sc in next st, 2 sc in next st; rep from * 12 times, sl st in first sc. (36 sc)*
Rnd 3: Ch 1, sc in next 2 sts, 2 sc in next st; rep from * 12 times, sl st in first sc. (48 sc)*
Rnd 4: Ch 1, hdc in each st around, sl st in first hdc. (48 hdc)
Place a marker in the first st of Rnd 4. This marks one side fold of the tube. The other side fold is at st 25.
Tulip Bands
Each band is 5 rnds, using an 8-st repeat worked 6 times around. Work Rnds 5–9 once, then repeat them 3 more times for four bands in all (Rnds 5–24). Each V-leaf always lands on the 5th st of a repeat, so the tulips stack in neat vertical columns.
Rnd 5 (leaf round): Ch 1, sc in first st, ch 2, sk 3 sts, V-leaf in next st, ch 2, sk 3 sts, sc in next st; rep from * around, leaving out the last sc of the final repeat, sl st in first sc. (6 sc, 6 V-leaves, 12 ch-2 sps)*
Check: each repeat uses 1 sc st + 3 skipped + 1 V-leaf st + 3 skipped = 8 sts, and 6 x 8 = 48.
Rnd 6 (tulip round): Ch 1, sc in first sc, ch 3, Tulip in ch-3 sp of next V-leaf, ch 3, sc in next sc; rep from * around, leaving out the last sc of the final repeat, sl st in first sc. (6 sc, 6 Tulips, 12 ch-3 sps)*
Skip the ch-2 sps of Rnd 5. The two dc of each V-leaf now frame a tulip like a pair of leaves. Each sc is the low point between two flowers.
Rnd 7 (lattice round): Ch 3 (counts as dc in the first sc), ch 3, sc in top of next Tulip, ch 3, dc in next sc; rep from * around, leaving out the last dc of the final repeat, sl st in top of beg ch-3. (6 dc, 6 sc, 12 ch-3 sps)*
The ch-3 loops on each side of a tulip form the open diamonds between the flowers.
Rnd 8 (stripe round, conversion): Ch 1, sc in same st as join (top of beg ch-3), 3 sc in next ch-3 sp, sc in next sc, 3 sc in next ch-3 sp, sc in next dc, 3 sc in next ch-3 sp, sc in next sc, 3 sc in next ch-3 sp; rep from * 4 more times, sl st in first sc. (48 sc = 12 sc worked 1 per existing st + 36 sc added in the 12 ch-3 sps)*
Rnd 9 (stripe round): Ch 1, sc in each st around, sl st in first sc. (48 sc)
Size check after the first band: the work should be 4 in (10.2 cm) tall and 6 in (15.2 cm) wide flat.
Repeat Rnds 5–9 three more times (Rnds 10–14, 15–19, and 20–24). You now have 4 rows of 6 tulips (24 tulips in all), ending with a 48-st sc stripe.
Size check: 12.25 in (31.1 cm) tall, from 1.25 in (3.2 cm) of bottom plus 4 bands of 2.75 in (7.0 cm).
Top Cuff (Border)
The cuff is this piece’s border. The holder is a tube, so it has no corners. When flattened, the 48 sts split into two sides of 24 sts each (front and back), folding at st 1 and st 25.
Border gauge: the 4 rnds of the cuff = 1.75 in (4.4 cm). The ribbing pulls in very slightly, which helps the opening hug the bags.
Rnd 25: Ch 1, hdc in each st around, sl st in first hdc. (48 hdc; 24 per flattened side)
Rnd 26: Ch 2 (does not count as a st), dc in each st around, sl st in first dc. (48 dc; 24 per side)
Rnd 27: Ch 2 (does not count), fpdc around next st, bpdc around next st; rep from * 24 times, sl st in first fpdc. (48 sts: 24 fpdc + 24 bpdc; 24 per side)*
Rnd 28: Ch 2 (does not count), fpdc around next fpdc, bpdc around next bpdc; rep from * 24 times, sl st in first fpdc. (48 sts; 24 per side)*
Don’t fasten off.
Why the math works: every cuff round has the same 48 sts as the stripe below it. Ribbing needs an even count, and 48 gives exactly 24 raised ribs, 12 per flattened side. No stitches are added, so the cuff stays 6 in (15.2 cm) wide flat. The finished body is 12.25 in + 1.75 in = 14 in (35.6 cm).
Strap Handle
The strap is worked straight off the cuff at one side fold and sewn to the other.
Row 1: Sl st along the round until your hook is at st 47 of Rnd 28. Ch 1, sc in st 47, st 48, and st 1. Turn. (3 sc)
Rows 2–40: Ch 1, sc in each of the 3 sts. Turn. (3 sc)
The strap should be about 9 in (22.9 cm) long and 0.75 in (1.9 cm) wide. Fasten off, leaving a 10 in (25.4 cm) tail.
Without twisting the strap, sew the last row to sts 23, 24, and 25 of Rnd 28 at the other fold. Stitch through the cuff and strap twice for strength, because this point carries the full weight of the bags.
Drawstring Cord
Cord: Ch 90, leaving a 4 in (10.2 cm) tail. Sl st in the back bump of the 2nd ch from hook and in each back bump to the end. Fasten off. (89 sl sts)
The cord should be about 20 in (50.8 cm) long. Tie a small overhand knot at each end and trim the tails.
Weave the cord in and out through every other sc of Rnd 1, starting and ending at the center front. Pull gently until the bottom opening is about 1 in (2.5 cm) across, then tie a bow. The bow sits at the bottom center, and you pull bags out through this opening.
Final Blocking
- Weave in all ends securely, especially at the strap seam and the starting tail.
- Remove the drawstring. Then lightly mist the holder, or soak it briefly and press out the extra water in a towel.
- Slide a rolled towel inside the tube, or a 6 in (15.2 cm) wide piece of cardboard wrapped in plastic.
- Shape the holder to 6 in (15.2 cm) wide and 14 in (35.6 cm) tall.
- Pinch each tulip into a rounded bud, and straighten each V-leaf so the leaves sit evenly on both sides.
- Smooth the ribbed cuff and straighten the strap.
- Let it dry completely, then remove the insert and rethread the drawstring.
Final Quality-Control Checklist
- 48 sts in every solid round
- 4 tulip bands of 6 tulips each, stacked in straight columns
- Each tulip sits in a symmetrical V-leaf
- Two solid sc stripe rounds above each tulip band
- A 4-round cuff with 24 clear ribs
- Flat width 6 in (15.2 cm), height 14 in (35.6 cm)
- Strap about 9 in (22.9 cm), attached at both side folds, not twisted
- Drawstring knotted at both ends, the bow ties neatly, and the opening closes to about 1 in (2.5 cm)
- All ends woven in
Troubleshooting
The bottom ruffles instead of cupping. Your tension is loose on Rnds 2–3. Go down a hook size, or work the increase rounds more tightly.
Tulips lean or spiral. A round probably started in the wrong st. Always start Rnd 5 in the first st after the join, and keep each V-leaf on the 5th st of its repeat.
Stitch count is off after Rnd 8. Make sure you work exactly 3 sc in every ch-3 sp and 1 sc in each dc and each sc.
Tulips look flat. Pull each loop up to full dc height, and close each tulip firmly with the ch 1.
The strap stretches. Crochet the strap more tightly, or use a 4 mm hook for the strap only.
Bags fall out of the bottom. Pull the drawstring tighter before tying the bow.
Care
Hand wash in cool water and lay flat to dry, reshaping the tulips while damp. Don’t hang it while wet, because that stretches the strap.

Final Notes
The measurement chain is simple. Rnd 3 sets 48 sts, which is 12 in (30.5 cm) around and 6 in (15.2 cm) flat. The bottom adds 1.25 in (3.2 cm), the four tulip bands add 11 in (27.9 cm), and the cuff adds 1.75 in (4.4 cm), for 14 in (35.6 cm) in total. The 9 in (22.9 cm) strap and the 20 in (50.8 cm) cord finish the holder.
Check your width after Rnd 3 and again after each band, and the rest will fall into place.
Happy crocheting!