This little heart ornament has an open shell-lace center and a soft, corded outline. The body is cream. Fan-shaped shells sit in neat staggered rows with small oval openings between them. A coral border frames the lace and gives the heart a crisp shape. A matching coral cord loop at the center dip lets it hang from a tree branch, a door knob, or a gift.
The look is cozy and a little vintage. It uses only two colors, cream and coral, in smooth DK cotton so the shells show clearly. It works as a Christmas ornament, a Valentine’s gift, or a gift tag.
This pattern uses US crochet terms. The finished heart is 4.5 in (11.4 cm) wide and 4.25 in (10.8 cm) tall. The hanging loop adds 1.5 in (3.8 cm), so the total hanging height is 5.75 in (14.6 cm).
Construction is simple. You work the cream lace body flat in 9 rows. It starts with one shell at the bottom point and grows one shell wider every second row. Then you add one cream round of single crochet, two coral border rounds, and the hanging loop. The heart is one piece, so there is no sewing.
Finished Size and Construction
- Finished size: 4.5 in (11.4 cm) wide x 4.25 in (10.8 cm) tall, not including the loop
- Hanging loop: 1.5 in (3.8 cm) tall
- Skill level: Easy-intermediate (good for confident beginners who know dc and sc)
- Terminology: US crochet terms
- Yarn weight: DK (light worsted, #3), cotton or cotton blend
- Hook: 3.5 mm (US E-4)
- Number of pieces: 1 (a single ornament, no joining)
- Layout: Heart worked from the bottom up in rows, then bordered in rounds
- Lace body size (after Row 9): 3.75 in (9.5 cm) wide x 3.5 in (8.9 cm) tall
- Size before the coral border (after Rnd 1): 4 in (10.2 cm) wide x 3.75 in (9.5 cm) tall
- Border depth: 0.375 in (1.0 cm) per edge in total: 0.125 in (0.3 cm) cream plus 0.25 in (0.6 cm) coral
Materials
Choose a smooth, tightly plied cotton or cotton blend in DK weight, about 110 m per 50 g. Cotton keeps the shells crisp and holds its shape after blocking. Fuzzy or very splitty yarn hides the lace openings.
- Color A, Cream: 8 g (about 18 m), for the lace body and Rnd 1
- Color B, Coral: 5 g (about 11 m), for the border and hanging loop
These amounts include about 25% extra for your test piece, yarn tails, and tension differences. One standard ball of each color makes many hearts.
Tools:
- 3.5 mm (US E-4) crochet hook
- Tapestry needle
- Scissors
- 2 stitch markers
- Ruler or tape measure
- Blocking mat, rust-proof pins, and a spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- rev sc – reverse single crochet (crab stitch)
- sp(s) – space(s)
- st(s) – stitch(es)
- tch – turning chain
- Rnd – round
- RS – right side
Special stitches
- Shell: 7 dc worked into the same stitch or space. The 4th dc is the center of the shell.
- Reverse sc (rev sc): If you crochet right-handed, work from left to right. Insert the hook into the next stitch to the right, yarn over, and pull up a loop. Yarn over again and pull through both loops on the hook. This makes the corded, twisted outer edge.
Gauge and Checkpoints
Gauge isn’t critical for an ornament, but it controls the final size and how open the lace looks. Work Rows 1–3 as your test piece. If it matches the gauge, you can keep it as part of the heart.
Gauge: Rows 1–3 measure 1.75 in (4.4 cm) wide x 1.25 in (3.2 cm) tall before blocking. One shell is about 0.75 in (1.9 cm) wide.
Checkpoints (before blocking, lightly flattened):
- After Row 1: 1 in (2.5 cm) wide
- After Row 3: 1.75 in (4.4 cm) wide x 1.25 in (3.2 cm) tall
- After Row 5: 2.5 in (6.4 cm) wide x 2 in (5.1 cm) tall
- After Row 7: 3.25 in (8.3 cm) wide x 2.75 in (7.0 cm) tall
- After Row 9: 3.75 in (9.5 cm) wide x 3.5 in (8.9 cm) tall
- After Rnd 1: 4 in (10.2 cm) wide x 3.75 in (9.5 cm) tall
- After Rnd 3: 4.5 in (11.4 cm) wide x 4.25 in (10.8 cm) tall
If your test piece is too big: Go down one hook size to 3.25 mm (US D-3), and check that your ch-3 spaces aren’t loose.
If your test piece is too small: Go up one hook size to 3.75 mm (US F-5). Tight chains also pinch the openings closed, so relax your chain tension first.

Lace Heart Body
Use Color A (Cream). Work the body in rows and turn at the end of each row. Shell rows (the odd rows) alternate with anchor rows (the even rows). Each anchor row adds one ch-3 space, so the next shell row gains one shell.
Row 1 (RS): Ch 4. Work 6 dc in the 4th ch from the hook (the skipped chains count as the first dc). Turn. (7 dc = 1 shell)
This shell forms the bottom point of the heart. Place a marker in the foundation ch at the base of the shell. You’ll work the tip of the border here later.
Row 2: Ch 1 (doesn’t count as a stitch), sc in first dc, ch 3, skip 2 dc, sc in next dc (center of shell), ch 3, skip 2 dc, sc in top of tch. Turn. (3 sc, 2 ch-3 sps)
Row 3: Ch 1, sc in first sc, shell in next ch-3 sp, sc in next sc, shell in next ch-3 sp, sc in last sc. Turn. (2 shells, 3 sc: 17 sts total)
Row 4: Ch 1, sc in first sc, ch 3, sc in center dc of next shell, ch 3, sc in center dc of next shell, ch 3, sc in last sc. Turn. (4 sc, 3 ch-3 sps)
The ch-3 spans make the small oval openings between the shells.
Row 5: Ch 1, sc in first sc, shell in next ch-3 sp, sc in next sc; repeat from * 2 more times. Turn. (3 shells, 4 sc: 25 sts total)*
Row 6: Ch 1, sc in first sc, ch 3, sc in center dc of next shell; repeat from * 2 more times, ch 3, sc in last sc. Turn. (5 sc, 4 ch-3 sps)*
Row 7: Ch 1, sc in first sc, shell in next ch-3 sp, sc in next sc; repeat from * 3 more times. Turn. (4 shells, 5 sc: 33 sts total)*
Row 8: Ch 1, sc in first sc, ch 3, sc in center dc of next shell; repeat from * 3 more times, ch 3, sc in last sc. Turn. (6 sc, 5 ch-3 sps)*
Row 9 (lobes): Ch 1, sc in first sc, shell in next ch-3 sp, sc in next sc, shell in next ch-3 sp, sc in next sc, ch 1, sc in next ch-3 sp (the center space), ch 1, sc in next sc, shell in next ch-3 sp, sc in next sc, shell in next ch-3 sp, sc in last sc. Don’t turn. (4 shells, 7 sc, 2 ch-1 sps: 35 sts total)
The center ch-3 space gets a single sc instead of a shell. This leaves a dip between two pairs of shells and forms the two rounded lobes at the top of the heart.
Checkpoint: 3.75 in (9.5 cm) wide x 3.5 in (8.9 cm) tall. You should count 4 shells in Row 9 and 1 shell at the point.
Edging Round (Cream)
Keep using Color A. Continue straight from Row 9 and work around the body in rounds. You’re starting at one top corner.
Rnd 1: Ch 1. Work down the first side edge with 3 sc in the end of each shell row (Rows 9, 7, 5, 3, 1) and 2 sc in the end of each anchor row (Rows 8, 6, 4, 2). (23 sc)
At the marked tip, work 3 sc in the foundation ch. (3 sc)
Work up the second side edge the same way. (23 sc)
Across the top of Row 9, sc in each of the first 17 sts (sc, 7 dc, sc, 7 dc, sc). (17 sc) Skip the ch-1 sp, sc in the center sc, skip the next ch-1 sp. (1 sc) Sc in each of the last 17 sts. (17 sc)
Join with a sl st to the first sc. Fasten off Color A. (84 sc)
Count check: 23 + 3 + 23 + 17 + 1 + 17 = 84 sc.
Place a marker in the center sc of the top dip.
Border
Border gauge: 6 sc = 1 in (2.5 cm) along a straight edge. Each coral round adds about 0.125 in (0.3 cm) per edge.
Use Color B (Coral).
Rnd 2: Join Color B with a sl st in the marked center sc. Ch 1, sc in the same st. (1 sc)
- First lobe: Sc in next 5 sts, 2 sc in next st, sc in next 5 sts, 2 sc in next st, sc in next 5 sts. (19 sc)
- Down the side: Sc in each of next 23 sts. (23 sc)
- Tip: Sc in next st, 3 sc in the center tip st, sc in next st. (5 sc)
- Up the side: Sc in each of next 23 sts. (23 sc)
- Second lobe: Sc in next 5 sts, 2 sc in next st, sc in next 5 sts, 2 sc in next st, sc in next 5 sts. (19 sc)
Join with a sl st to the first sc. (90 sc)
Count check: 1 + 19 + 23 + 5 + 23 + 19 = 90 sc. That’s the 84 stitches from Rnd 1 worked once each (84) plus 6 added stitches (2 per lobe and 2 at the tip).
Rnd 3: Ch 1, rev sc in each st around. Join with a sl st to the first rev sc. (90 rev sc: 1 at the center, 19 per lobe, 23 per side, 5 at the tip)
Why the math works:
- The straight sides get 1 sc per stitch, so they lie flat without ruffling.
- Each lobe is an outside curve, so it needs 2 extra stitches to lie flat around the shells.
- The tip is a sharp corner, so it gets 3 sc in the center stitch, which adds 2 stitches.
- The center dip is an inside curve and gets no extra stitches, so it stays pulled in and keeps the heart shape.
- Rnd 3 is worked one stitch into each stitch, so it keeps all 90 stitches and only adds the corded texture.
Hanging Loop
Keep using Color B and start at the center dip.
- Ch 20, then sl st in the same center st at the dip.
- Work 30 sc into the ch-20 loop so they cover the chain completely.
- Sl st in the center st at the base of the loop. Fasten off.
The 30 sc pack tightly around the chain to make a firm coral cord. Checkpoint: The loop stands 1.5 in (3.8 cm) above the dip.
Weave in all ends along the back of the border, not through the lace, so the openings stay clean.
Final Blocking
- Lightly spray the heart with water until it’s damp but not dripping.
- Lay it right side up on the blocking mat.
- Pin the tip, then pin each lobe top into a smooth curve.
- Pin the center dip so it points straight down toward the tip.
- Measure it: it should be 4.5 in (11.4 cm) wide x 4.25 in (10.8 cm) tall. Adjust the pins until both halves match.
- Gently open each oval space with a fingertip so the shells fan out evenly.
- Lay the loop straight up from the dip.
- Let it dry completely, for at least 4 hours, before you unpin it.
For a stiffer ornament, use a light fabric stiffener or diluted starch spray before it dries.
Final Quality-Control Checklist
- The shell rows have 1 shell at the point, then 2, 3, 4, and 4 shells
- Each shell has 7 dc fanning out from one stitch or space
- Oval openings show between all the shell rows
- The center dip in Row 9 has a single sc, not a shell
- Rnd 1 has 84 sc, and Rnds 2 and 3 have 90 stitches each
- The border lies flat with no ruffling at the lobes or tip
- The loop is centered at the dip and stands 1.5 in (3.8 cm) tall
- The final size is 4.5 in (11.4 cm) x 4.25 in (10.8 cm)
- All ends are woven in along the border
Troubleshooting
The heart is lopsided. Check that each anchor row ends with an sc in the last sc. A missed edge sc removes a space and shifts the shells.
The shells cup or curl. Your dc may be tighter than your chains. Go up a hook size for the shell rows, or loosen the ch-3 spaces.
The openings close up. Your ch-3s are too tight. Chain more loosely. If that doesn’t fix it, work ch 4 in the anchor rows.
The border ruffles. You have too many stitches on the sides. Recount the row-end stitches in Rnd 1: there should be 23 sc per side.
The border pulls in or puckers. The border is too tight. Go up a hook size for Rnd 2 and keep the rev sc relaxed.
The tip is blunt. Make sure the 3 tip sc in Rnd 1 go into the foundation ch, and pin the tip to a sharp point when blocking.
The loop sags or twists. Add 2–4 more sc into the loop to pack it tighter.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and reshape it flat to dry. Store it flat, or hang it by the loop out of direct sunlight to keep the coral bright.

Final Notes
Here are the measurements in order. Your test piece (Rows 1–3) should be 1.75 in (4.4 cm) wide. By Row 9, the lace body grows to 3.75 in (9.5 cm) x 3.5 in (8.9 cm). The cream edging round brings it to 4 in (10.2 cm) x 3.75 in (9.5 cm). The two coral rounds finish it at 4.5 in (11.4 cm) x 4.25 in (10.8 cm). The 1.5 in (3.8 cm) loop brings the total hanging height to 5.75 in (14.6 cm).
If each checkpoint matches, your stitch counts will match too: 84 stitches in Rnd 1 and 90 in Rnds 2 and 3. Make one for the tree, one for a gift, and one to keep.
Happy crocheting!