Snowblossom Lace is an airy curtain panel covered in cream six-petal flowers. Each flower is framed by a light lattice of chain lines, and tiny powder-blue flowers sit at every lattice point. At the bottom, a neat filet mesh hem adds weight and a tidy finish so the panel hangs straight.
The palette is two colors: a warm cream for the lace and a soft blue for the accents. In a window, the cream flowers glow and the blue points read like frost crystals, so it works for winter and is calm enough to leave up all year.
This pattern uses US crochet terms. Each finished panel measures 40.5 in wide x 79.5 in long (102.9 cm x 201.9 cm). The photo shows two identical panels hung as a pair. They are made separately and never joined.
You work each panel flat in rows from a single foundation chain. A 5-row “band” makes one row of flowers, and 19 bands make the body. After that you work a 6-row filet mesh hem into the foundation edge, add one round of single crochet edging, and embroider the blue flowers.
Finished Size and Construction
- Finished size (per panel): 40.5 in x 79.5 in (102.9 cm x 201.9 cm)
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: DK (#3) cotton or cotton blend
- Hook: 4.0 mm (G-6)
- Number of pieces: 2 separate panels, each worked as one piece
- Layout: 10 flowers across x 19 flowers down per panel
- Flower repeat size: 4 in x 4 in (10.2 cm x 10.2 cm)
- Size before border: 40 in x 76 in (101.6 cm x 193.0 cm)
- Border depth: filet hem 3 in (7.6 cm) at the bottom; edging 0.25 in (0.6 cm) on all sides
Materials
Use a smooth, mercerized or combed cotton DK yarn. Cotton holds the lace shape after blocking and doesn’t stretch much while hanging. Avoid fuzzy yarns, because they blur the chain lattice.
Yarn (DK, approx. 105 m per 50 g):
- Cream (main color): 900 g / 1,890 m per panel, or 1,800 g / 3,780 m for the pair
- Powder blue (accent): 100 g / 210 m per panel, or 200 g / 420 m for the pair
Tools:
- 4.0 mm (G-6) crochet hook
- Blunt tapestry needle
- Locking stitch markers (at least 12)
- Tape measure
- Rustproof pins and a large clean blocking surface
- Spray bottle
- 14 clip curtain rings per panel (or as many as your rod needs)
All yarn quantities include a margin of about 10% for gauge swatches and small differences in tension.
Abbreviations (US Terms)
- ch – chain
- sc – single crochet
- dc – double crochet
- tr – treble crochet (yo twice)
- dtr – double treble crochet (yo three times)
- sp(s) – space(s)
- st(s) – stitch(es)
- yo – yarn over
- rep – repeat
Special stitches:
- Unfinished tr: Yo twice, insert hook, pull up a loop, (yo, pull through 2 loops) twice. Each one leaves 1 extra loop on the hook.
- Lower Fan Cluster (LFC): Work 3 unfinished tr in the first indicated st (4 loops on hook). Skip 2 sts and work 3 unfinished tr in the next st (7 loops). Skip 2 sts and work 3 unfinished tr in the next st (10 loops). Yo and pull through all 10 loops. This makes three petals fanning down from one point.
- Petal Cluster (PC): Work 3 unfinished tr in the same space (4 loops on hook), then yo and pull through all 4 loops.
- Lazy daisy petal: An embroidered detached chain stitch. Bring the needle up at the node, form a loop, go back down at the same point, and tack the loop’s tip with a tiny stitch.
Gauge and Checkpoints
Base gauge: 16 sc = 4 in (10.2 cm).
Lace gauge: 1 flower repeat (16 sts) = 4 in (10.2 cm) wide, and 1 band (5 rows) = 4 in (10.2 cm) tall, after blocking.
Mesh gauge: 2 mesh squares = 1 in (2.5 cm), and 2 mesh rows = 1 in (2.5 cm).
Test one piece first. Ch 34 and work the pattern below with 2 repeats (33 sc) for 2 bands. Block the swatch. It should measure 8 in x 8 in (20.3 cm x 20.3 cm).
- If it’s too big, change to a 3.75 mm hook.
- If it’s too small, change to a 4.5 mm hook.
A difference of just 0.25 in (0.6 cm) on the swatch grows to about 1.25 in (3.2 cm) across the full panel width, so don’t skip this step.
Checkpoints for the full panel (lightly stretched flat):
- Foundation sc row: 40 in (101.6 cm) wide
- After 5 bands: 20 in (50.8 cm) tall
- After 10 bands: 40 in (101.6 cm) tall
- After 19 bands: 76 in (193.0 cm) tall
- After the hem: 79 in (200.7 cm) tall

Main Pattern: Lace Body
The pattern repeat is a multiple of 16 sts + 1. Turn at the end of every row. The lace is fully reversible, so you choose the front side when you block.
Foundation: With cream, ch 162.
Row 1 (sc line): Sc in 2nd ch from hook and in each ch across. Turn. (161 sc)
Place a marker in the 1st sc and in every 16th sc after it. That gives 11 markers. The marked sts are the lattice “corners.”
The Band (Rows 2–5 plus a closing sc line)
Row 2 (lower petals): Ch 1, sc in first sc.
Ch 4, skip 4 sc, work an LFC over the next 7 sc (the legs go into the 1st, 4th and 7th of them), ch 4, skip 4 sc, sc in the next (marked) sc. Rep from * across. Turn.
(11 sc, 10 LFC, 20 ch-4 sps)
Check the placement: each LFC is centred between two corner sc, with its middle leg in the 8th st of the repeat.
Row 3 (centre rings and side spokes): Ch 4 (counts as tr here and throughout).
Ch 3, (sc, ch 4, sc) in the top of the next LFC, ch 3, tr in the next sc. Rep from * across. Turn.
(11 tr, 20 sc, 10 ch-4 rings, 20 ch-3 sps)
Each ch-4 loop is a flower’s open centre ring. The ch-3 sps are the short horizontal spokes.
Row 4 (upper petals): Ch 1, sc in first tr.
Ch 4, (PC, ch 3, PC, ch 3, PC) in the next ch-4 ring, ch 4, sc in the next tr. Rep from * across, working the last sc in the top of the turning ch. Turn.
(11 sc, 30 PC, 20 ch-3 sps, 20 ch-4 sps)
Row 5 (diagonal lattice): Ch 5 (counts as dtr).
Ch 4, sc in the top of the next PC, ch 3, sc in the next PC, ch 3, sc in the next PC, ch 4, dtr in the next sc. Rep from * across, working the last dtr in the last sc. Turn.
(11 dtr, 30 sc, 20 ch-4 sps, 20 ch-3 sps)
The tall dtr at each corner brings the edge level with the petal tips. The ch-4 lines slant from each corner to the outer petals, forming the triangles between flowers.
Closing sc line: Ch 1, sc in first dtr.
3 sc in ch-4 sp, sc in sc, 3 sc in ch-3 sp, sc in sc, 3 sc in ch-3 sp, sc in sc, 3 sc in ch-4 sp, sc in dtr. Rep from * across, working the last sc in the top of the turning ch. Turn.
(161 sc)
Per repeat that is 3 + 1 + 3 + 1 + 3 + 1 + 3 + 1 = 16 sc, and 10 repeats x 16 + 1 = 161. Move your corner markers up to the 1st sc and every 16th sc.
Body Length
Work the band (Rows 2–5 plus the closing sc line) 19 times in total, measuring at each checkpoint. To change the length, add or remove bands; each one changes the length by 4 in (10.2 cm).
After the 19th closing sc line, the body measures 40 in x 76 in (101.6 cm x 193.0 cm). Fasten off.
Make All Pieces
Make 2 identical panels for a pair. They hang side by side and are never joined.
| Color | Per panel | Pair |
|---|---|---|
| Cream | 900 g / 1,890 m | 1,800 g / 3,780 m |
| Blue | 100 g / 210 m | 200 g / 420 m |
Layout grid (one panel, top to bottom):
Edging sc round, all 4 sides
Band 19 * F * F * F * F * F * F * F * F * F * F *
... (same as below)
Band 2 * F * F * F * F * F * F * F * F * F * F *
Band 1 * F * F * F * F * F * F * F * F * F * F *
Hem filet mesh: 80 squares x 6 rows
Edging sc round
In the grid, F = one cream flower (10 per band) and * = blue flower nodes (11 per lattice line).
Finish Panel 1 through blocking before you start Panel 2. That way you can compare tension and keep the two panels matched.
Border
The border has two parts: the filet mesh hem along the bottom, then one sc edging round around the whole panel.
Border gauge: 2 mesh squares or 2 mesh rows = 1 in (2.5 cm). On the edging, 4 sc = 1 in (2.5 cm) on every side.
Part A: Filet Mesh Hem
Turn the panel so the foundation edge is at the top. Join cream in the first free loop of the foundation chain.
Mesh Row 1: Ch 4 (counts as dc + ch 1), skip next st, dc in next st.
Ch 1, skip 1 st, dc in next st. Rep from * across. Turn.
(81 dc, 80 ch-1 sps)
The dc sit in every second stitch: 80 sps x 2 + 1 = 161 sts, which matches the body exactly.
Mesh Rows 2–6: Ch 4 (counts as dc + ch 1), skip ch-1 sp, dc in next dc.
Ch 1, skip ch-1 sp, dc in next dc. Rep from * across, working the last dc in the 3rd ch of the turning ch. Turn.
(81 dc, 80 ch-1 sps on every row)
The hem now measures 3 in (7.6 cm), and the panel is 40 in x 79 in (101.6 cm x 200.7 cm). Do not fasten off.
Part B: Edging Round
Rotate and work around the whole panel. The 4 corners are the first and last st of the top sc line and the first and last st of Mesh Row 6. Work 3 sc into each corner st.
- Bottom (Mesh Row 6): Sc in each dc and ch-1 sp between the corners. (159 sc)
- Each long side: Work 16 sc per band: 1 in the sc line, 4 in Row 2, 4 in Row 3, 3 in Row 4 and 4 in Row 5. The top band has no sc line on its side, because that st is the corner, so it gets 15 sc. Then work 1 sc in the end of the foundation sc row and 2 sc in each of Mesh Rows 1–5. (18 x 16 + 15 + 1 + 10 = 314 sc)
- Top: Sc in each st between the corners. (159 sc)
- Corners: 3 sc in each. (12 sc)
Sl st to the first sc and fasten off.
(Round total: 159 + 159 + 314 + 314 + 12 = 958 sc)
Why the math works:
- Width: The top and bottom each have 159 sc plus the 2 corner centre sts, which is 161. That matches 10 x 16 + 1.
- Length: Each long side has 314 sc plus the 2 corner centre sts, which is 316 sts. At 4 sc per inch that is 79 in (200.7 cm), which matches the 76 in (193.0 cm) body plus the 3 in (7.6 cm) hem.
- Gauge: Bands give 16 sc per 4 in, and mesh rows give 2 sc per 0.5 in (1.3 cm). Both work out to 4 sc per inch, so the edging lies flat without ruffling or pulling.
- Final size: The edging adds 0.25 in (0.6 cm) on each side, for 40.5 in x 79.5 in (102.9 cm x 201.9 cm).
Blue Flowers
Thread a tapestry needle with an 18 in (45.7 cm) length of blue. Embroider a flower at each node:
- every marked corner sc on every sc line: 20 lines x 11 = 220
- every corner tr in Row 3 of each band: 19 x 11 = 209
That is 429 flowers per panel.
For each flower, work 5 lazy daisy petals, each about 0.25 in (0.6 cm) long, radiating from the node. Leave the cream stitch showing in the centre. The finished flower is about 0.5 in (1.3 cm) across.
Embroider each band as you finish it, so the count stays easy to track. Weave in the tails on the back of a sc line.
Final Blocking
- Weave in all cream ends along sc lines, splitting the plies so they hold.
- Soak the panel in cool water for 15 minutes. Press out the water. Don’t wring it.
- Roll it in towels to remove excess water.
- Lay a clean sheet over a large blocking surface (a carpeted floor or mattresses work well) and lay the panel flat.
- Pin the corners to 40.5 in x 79.5 in (102.9 cm x 201.9 cm).
- Pin along each sc line so the lines are straight and every band measures 4 in (10.2 cm).
- Open each centre ring and spread the petals evenly. Pin the corner dtr points so the triangles are sharp.
- Pin the mesh hem so the squares are square.
- Let it dry completely. Unpin only when it’s fully dry.
Final Quality-Control Checklist
- [ ] Every sc line has 161 sc.
- [ ] Each band has 10 complete flowers with 6 petals and an open ring.
- [ ] There are 19 bands in total.
- [ ] Mesh rows have 81 dc and 80 squares, 6 rows deep.
- [ ] The edging round has 958 sc, with 3 sc in each corner.
- [ ] All 429 blue flowers have 5 even petals.
- [ ] The panel measures 40.5 in x 79.5 in (102.9 cm x 201.9 cm).
- [ ] Both panels match within 0.5 in (1.3 cm).
Troubleshooting
- The LFC leans to one side: You skipped the wrong number of sts. The legs go into the 5th, 8th and 11th sts after the corner sc.
- The sc line has the wrong count: Recount the sts in your ch-3 and ch-4 sps. Every sp holds exactly 3 sc.
- The edges wave: Your turning chains are too loose. Tighten them, or make each one 1 ch shorter.
- The hem flares: Use a tighter ch 1 in the mesh, or work the hem with a hook one size smaller.
- The panels differ in length: Block the longer panel slightly shorter, or add or remove one mesh row on one panel.
- The blue flowers pucker: Pull the embroidery loops just snug, not tight.
Care
Hand wash in cool water with mild detergent, and reshape the panel flat to dry. Avoid hanging it wet, because cotton lace stretches under its own weight.

Final Notes
The measurement chain is simple:
- Each 16-st repeat is 4 in (10.2 cm) wide, so 10 repeats give 40 in (101.6 cm).
- Each 5-row band is 4 in (10.2 cm) tall, so 19 bands give 76 in (193.0 cm).
- The mesh hem adds 3 in (7.6 cm), for 79 in (200.7 cm).
- The edging adds 0.25 in (0.6 cm) on each side, for a finished panel of 40.5 in x 79.5 in (102.9 cm x 201.9 cm).
Check your gauge on the swatch, count 161 at every sc line, and both panels will hang as a matched pair.
Happy crocheting!