Snowy Shell Christmas Tree Ornament Crochet Pattern

The Snowy Shell Christmas Tree Ornament is a light, lacy tree built from fan-shaped shells. Three tiers of white shells form a neat triangle, open diamonds sit between the tiers, and a small brown single crochet trunk anchors the bottom. A white chain loop at the tip lets it hang straight on a branch.

The palette is simple: crisp white for the tree and warm brown for the trunk. White cotton shows the fan spokes clearly and looks like snow-dusted branches on a lit tree. It also works well as a gift tag or package topper.

This pattern uses US crochet terms. The finished ornament is about 4 in (10.2 cm) wide and 3.9 in (9.9 cm) tall without the loop. With the loop it is about 5.65 in (14.4 cm) tall.

Construction is all in one piece. You start with a chain-loop base row and work the shell tiers back and forth, narrowing from three shells to one. Then you add the brown trunk into the underside of the base chain and finish with a rim around the sloped sides, which also forms the hanging loop.

Finished Size and Construction

  • Finished size: 4 in (10.2 cm) wide × 3.9 in (9.9 cm) tall, excluding loop
  • Height with loop: about 5.65 in (14.4 cm)
  • Skill level: Easy
  • Terminology: US crochet terms
  • Yarn weight: DK / light worsted (weight 3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 1 (worked in one piece; no sewing except weaving in ends)
  • Layout: 3 shells, 2 shells, 1 shell, stacked in a triangle, with a centered trunk
  • Piece size before rim (tree body): 3.75 in (9.5 cm) wide × 2.75 in (7.0 cm) tall
  • Trunk: 0.8 in (2.0 cm) wide × 0.9 in (2.3 cm) tall
  • Rim depth: about 0.125 in (0.3 cm) on each sloped side

Materials

Yarn: Use a smooth, mercerized or combed cotton in DK weight. Cotton holds the fan spokes crisply and blocks flat. Acrylic works too, but the shells will look softer and rounder.

  • White (tree, rim, loop): 8 g, about 18 m
  • Brown (trunk): 2 g, about 5 m

These quantities include a margin for your gauge swatch and weaving in ends. The ornament itself uses roughly 6 g of white and 1.5 g of brown.

Tools:

  • 3.5 mm (E-4) crochet hook
  • Tapestry needle
  • Scissors
  • Rustproof pins and a foam blocking mat
  • Spray bottle with water
  • Ruler or tape measure

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)

Special stitch – Shell: Work [dc, ch 1] 6 times, then dc, all in the same space. Each shell has 7 dc and 6 ch-1 sps. The 4th dc is the center dc.

Gauge and Checkpoints

Gauge: 5 sc and 5.5 rows = 1 in (2.5 cm). One shell measures about 1.25 in (3.2 cm) across its rim and 0.6 in (1.5 cm) tall.

Make one test shell before you start. Ch 6, sl st in the first ch to form a ring, then work one shell into the ring. Pin it flat and measure across the rim.

Checkpoints:

  1. Base row: about 3.25 in (8.3 cm) long, lying flat
  2. After Row 2 (bottom tier): 3.75 in (9.5 cm) wide
  3. After Row 6 (top shell): 2.75 in (7.0 cm) tall from the base chain to the top of the top shell
  4. Trunk: 0.8 in (2.0 cm) wide × 0.9 in (2.3 cm) tall
  5. After the rim: 4 in (10.2 cm) wide × 3.9 in (9.9 cm) tall, excluding loop

If your test shell is too big (over 1.4 in / 3.6 cm), go down to a 3.25 mm hook. If it is too small (under 1.1 in / 2.8 cm), go up to a 3.75 mm hook. Shells that are too tight will cup and won’t sit flat in their loops.

Close-up of white braided cord forming intricate macramé knot patterns against a warm golden-brown wooden surface.

Pattern

Base Row (White)

Foundation: With white, ch 17.

Row 1: Sc in 2nd ch from hook, [ch 4, sk 4 ch, sc in next ch] 3 times. (4 sc, 3 ch-4 sps)

The three ch-4 sps are the loops the bottom shells sit in. The 4 skipped chains under the center loop become the base for the trunk later.

Checkpoint: About 3.25 in (8.3 cm) long.

Tier 1 – Three Shells

Row 2: Ch 1, turn. Sc in first sc, [Shell in next ch-4 sp, sc in next sc] 3 times. (3 shells = 21 dc and 18 ch-1 sps; 4 sc)

Each shell fans up from its ch-4 sp and its spokes spread into a rounded rim. Each sc between shells pins the shell bases to the base row.

Checkpoint: 3.75 in (9.5 cm) wide. Gently stretch each fan open with your fingers before moving on.

Tier 2 – Two Shells

Row 3 (loop row): Turn (no ch). Sl st in first sc, then sl st in each dc and ch-1 sp across the first shell up to its center dc (7 sl st). Sc in center dc, [ch 5, sc in center dc of next shell] 2 times. (7 sl st, 3 sc, 2 ch-5 loops)

Each ch-5 loop runs from the center of one shell to the center of the next. The space under each loop is one of the diamond openings. Do not work past the last sc; leave the rest of that shell unworked.

Row 4: Ch 1, turn. Sc in first sc, [Shell in next ch-5 loop, sc in next sc] 2 times. (2 shells = 14 dc and 12 ch-1 sps; 3 sc)

Tier 3 – Top Shell

Row 5 (loop row): Turn (no ch). Sl st in first sc, then sl st in each dc and ch-1 sp across the first shell up to its center dc (7 sl st). Sc in center dc, ch 5, sc in center dc of next shell. (7 sl st, 2 sc, 1 ch-5 loop)

Row 6: Ch 1, turn. Sc in first sc, Shell in ch-5 loop, sc in next sc. (1 shell = 7 dc and 6 ch-1 sps; 2 sc)

Fasten off white, leaving a 4 in (10.2 cm) tail.

Checkpoint: 2.75 in (7.0 cm) tall from the base chain to the top of the top shell. The outline should already be a clear triangle with two diamond openings between Tiers 1 and 2 and one between Tiers 2 and 3.

Trunk (Brown)

Turn the tree upside down so the base chain faces you. Find the 4 skipped chains under the center ch-4 sp. You will work into their free bottom loops.

Row 1: Join brown with sl st in the first of the 4 center chains. Ch 1, sc in same ch and in each of the next 3 ch. (4 sc)

Rows 2–5: Ch 1, turn, sc in each st across. (4 sc each row)

Fasten off brown and weave in the end along the trunk side.

Checkpoint: 0.8 in (2.0 cm) wide × 0.9 in (2.3 cm) tall, centered under the middle bottom shell.

Border: Shell Rim and Hanging Loop

The rim is one white pass up the right slope, over the top shell and down the left slope. It outlines each exposed half shell and adds the hanging loop at the tip. The bottom edge and trunk are not worked.

Rim gauge: 2 sc per ch-1 sp keeps the rim flat on a fanned shell. With 1 sc per sp the rim pulls tight; with 3 per sp it ruffles.

Exposed edges:

  • Right side: Outer half (3 ch-1 sps) of the bottom-right shell and the middle-right shell
  • Top: All 6 ch-1 sps of the top shell
  • Left side: Outer half (3 ch-1 sps) of the middle-left shell and the bottom-left shell
  • Junctions: The row-end sc stacked on each bottom-tier and middle-tier shell’s center dc, where the next tier begins (2 per side)

Rim Round: With the right side facing, join white with sl st in the outermost dc at the lower right tip of the tree.

  • Right side: [2 sc in each of the next 3 ch-1 sps (6 sc), sl st in the junction sc] 2 times. (12 sc, 2 sl st)
  • Top shell: 2 sc in each of the first 3 ch-1 sps (6 sc). Sl st in the center dc, ch 20, sl st in the same center dc to form the hanging loop. Then 2 sc in each of the last 3 ch-1 sps (6 sc). (12 sc, 2 sl st, 1 ch-20 loop)
  • Left side: [sl st in the junction sc, 2 sc in each of the next 3 ch-1 sps (6 sc)] 2 times. (12 sc, 2 sl st)

Sl st in the outermost dc at the lower left tip and fasten off.

Rim total: 36 sc, 6 sl st and 1 ch-20 loop.

Why the math works: Every shell has 6 ch-1 sps. Each half shell on a sloped side has 3 sps, and each side has 2 half shells, so each side gets 3 × 2 × 2 = 12 sc. The top shell shows all 6 sps, so it also gets 12 sc, split 6 and 6 around the loop. The two sides match exactly, so the tree stays symmetrical. The loop is anchored on the center dc, which is the exact center line of the ornament.

Checkpoint: 4 in (10.2 cm) wide × 3.9 in (9.9 cm) tall, excluding loop. The loop stands about 1.75 in (4.4 cm) above the tip.

Final Blocking

  1. Weave in all ends along the stitches of their own color, so white tails don’t show on the brown trunk.
  2. Pin the ornament face up on a blocking mat.
  3. Pin the two lower tips first, 4 in (10.2 cm) apart.
  4. Pin the top tip so the tree measures 3 in (7.6 cm) from the base row to the top of the rim.
  5. Open each shell by pinning its rim into an even arc, and pin each diamond opening open.
  6. Pin the trunk into a straight rectangle, 0.8 in (2.0 cm) × 0.9 in (2.3 cm).
  7. Lay the hanging loop straight up from the tip.
  8. Mist until damp, but not soaked.
  9. Let it dry completely, at least 6 hours, before unpinning.
  10. For extra stiffness, mist lightly with fabric stiffener or starch spray before drying.

Final Quality-Control Checklist

  • 3 shells in Tier 1, 2 in Tier 2, 1 in Tier 3
  • Every shell has 7 dc and 6 ch-1 sps
  • Three diamond openings are visible and roughly the same size
  • The trunk is 4 sc wide and 5 rows tall, centered under the middle shell
  • Each side of the rim has 12 sc and 2 sl st, and the top shell has 12 sc
  • The hanging loop sits at the exact center tip
  • Size is 4 in (10.2 cm) × 3.9 in (9.9 cm), excluding loop
  • All ends are woven in and invisible from the front

Troubleshooting

Shells cup or curl: The ch-4 or ch-5 loops are too short for your tension. Chain more loosely, or add 1 ch to each loop and keep the shell counts the same.

Tree leans to one side: Check that each loop row ends on the center dc of the last shell, not one stitch past it.

Diamond openings are uneven: The ch-5 loops are different lengths. Keep each chain at the same tension, and pin the diamonds evenly when blocking.

Trunk is off-center: You started in the wrong chains. Count back to the 4 skipped chains directly under the middle ch-4 sp.

Rim ruffles: You worked more than 2 sc per sp. Rim pulls in: Go up half a hook size for the rim only.

Loop twists: Before blocking, untwist the chain and pin it flat.

Care

Hand wash in cool water with mild soap, press out the water in a towel and re-pin to dry. Store flat, or hang it by the loop, to keep the shells open.

White crocheted Christmas tree ornament with brown trunk hanging from an evergreen branch with warm glowing lights.

Final Notes

The measurement chain is simple. A 1.25 in (3.2 cm) test shell gives a 3.25 in (8.3 cm) base row and a 3.75 in (9.5 cm) bottom tier. The tree body reaches 2.75 in (7.0 cm) tall, and the 4-stitch trunk adds 0.9 in (2.3 cm). After the 12-sc rim on each side, the finished ornament is 4 in (10.2 cm) × 3.9 in (9.9 cm), with a 1.75 in (4.4 cm) loop on top. Check each stage as you go and every ornament in your set will match.

Happy crocheting!

Leave a Comment