Sunny Lattice Striped Curtain Crochet Pattern

The Sunny Lattice Curtain uses two colors in alternating stripes. Narrow royal-blue strips of open filet mesh sit between wider butter-yellow strips. Each yellow strip has a column of lacy eyelet diamonds running down its center. When the curtain hangs in a window, light comes through the mesh and the eyelets, and the solid yellow areas give some privacy.

The style is cheerful and graphic, with a cottage feel. Six yellow tabs hold it on a curtain rod, and a row of shell scallops finishes the bottom edge. The panel uses only two colors: royal blue and pale yellow.

This pattern uses US crochet terms. Before blocking, the finished curtain measures 32.25 in wide by 62.5 in long (81.9 x 158.8 cm), not counting the tabs. The tab loops add about 3 in (7.6 cm) above the top edge.

You make 11 separate strips from the bottom up in short rows, join them with slip-stitch seams, and then add the top and bottom borders, the side edges, and the tabs. Every stage has a measurement checkpoint, so you can confirm the size as you go.

Finished Size and Construction

  • Finished size: 32.25 in wide x 62.5 in long (81.9 x 158.8 cm), plus about 3 in (7.6 cm) of tab loop
  • Skill level: Intermediate (simple stitches, careful counting)
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton or cotton blend
  • Hook: US H-8 (5.0 mm)
  • Number of pieces: 11 strips (6 blue mesh, 5 yellow diamond)
  • Layout: 11 strips side by side, blue at both outer edges
  • Piece size: blue strip 1.75 x 61.5 in (4.4 x 156.2 cm); yellow strip 4.25 x 61.5 in (10.8 x 156.2 cm)
  • Size before border: 31.75 x 61.5 in (80.6 x 156.2 cm)
  • Border depth: 0.75 in (1.9 cm) at the bottom (sc row plus scallops), 0.25 in (0.6 cm) at the top, 0.25 in (0.6 cm) on each side

Materials

Yarn advice: Use a smooth worsted cotton or cotton blend. Cotton holds its shape when it hangs, shows the eyelets clearly, and stands up to sun and washing. Don’t use acrylic for a curtain this long, because it can stretch under its own weight.

  • Color A, Butter Yellow: about 1,100 g / 1,870 m (yellow strips, all borders, tabs, seams)
  • Color B, Royal Blue: about 400 g / 680 m (mesh strips)

These amounts include roughly a 10% margin for your gauge swatch and tension differences.

Tools:
– US H-8 (5.0 mm) crochet hook
– Tapestry needle
– Stitch markers
– Measuring tape
– Rustproof pins and a blocking surface (foam mats or a carpet covered with a towel)
– Spray bottle
– Scissors

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sk – skip
  • st(s) – stitch(es)
  • sp – space
  • RS / WS – right side / wrong side
  • rep – repeat

Special stitches:
– Eyelet / mesh space: ch 1, sk next st. Each ch-1 counts as 1 stitch. On the next row, work 1 dc into each ch-1 sp, unless the pattern places another eyelet there.
– Shell: 5 dc in the same stitch.

At the start of each dc row, ch 3 counts as the first dc. Work the last dc of each row into the top of the turning ch-3.

Gauge and Checkpoints

Gauge: 16 dc and 8 rows = 4 in (10.2 cm). In sc, 16 sts and 18 rows = 4 in (10.2 cm).

Test one piece first. Make the first yellow strip up to Row 8. It should measure 4.25 in (10.8 cm) wide and 4 in (10.2 cm) tall.

Checkpoints:
– Yellow strip after Row 8: 4.25 x 4 in (10.8 x 10.2 cm)
– Blue strip after Row 20: 1.75 x 10 in (4.4 x 25.4 cm)
– Any finished strip: 61.5 in (156.2 cm) long, measured flat without stretching
– All 11 strips joined: 31.75 in (80.6 cm) wide

If your strip is too big, go down a half size (4.5 mm). If it’s too small, go up to 5.5 mm. Width matters most: if each strip is just 0.125 in too wide, the whole curtain ends up more than 1.25 in (3.2 cm) too wide.

Yellow crocheted lace stripe with openings, centered between blue geometric knit borders.

Yellow Diamond Strip (make 5)

Use Color A.

Foundation: Ch 19.

Row 1 (RS): Dc in 4th ch from hook (the skipped ch count as 1 dc), dc in each remaining ch across. (17 sts)

Rows 2–3: Ch 3, turn, dc in each st across. (17 sts)

Row 4 (diamond tip): Ch 3, turn, dc in next 7 sts, ch 1, sk next st, dc in next 8 sts. (17 sts: 16 dc + 1 ch-1 sp)

Row 5: Ch 3, turn, dc in next 5 sts, ch 1, sk next st, dc in next 3 sts, ch 1, sk next st, dc in next 6 sts. (17 sts: 15 dc + 2 ch-1 sps)

Row 6 (diamond center): Ch 3, turn, dc in next 3 sts, ch 1, sk next st, dc in next 3 sts, ch 1, sk next st, dc in next 3 sts, ch 1, sk next st, dc in next 4 sts. (17 sts: 14 dc + 3 ch-1 sps)

Row 7: Work as Row 5. (17 sts)

Row 8 (diamond tip): Work as Row 4. (17 sts)

The eyelets fall on stitch positions 9; 7 and 11; 5, 9 and 13; 7 and 11; and 9. That forms a diamond outline with one hole in the center. Because 17 is an odd number and stitch 9 is the exact middle, the diamond stays centered on both RS and WS rows.

Rows 9–120: Rep Rows 1–8 fourteen more times. In each repeat, work the three “Row 1” style rows as ch 3, turn, dc across. That gives 15 diamonds in total.

Rows 121–123: Ch 3, turn, dc in each st across. (17 sts)

Fasten off, leaving a short tail. The strip has 123 rows and should measure 4.25 x 61.5 in (10.8 x 156.2 cm).

Blue Mesh Strip (make 6)

Use Color B.

Foundation: Ch 9.

Row 1 (RS): Dc in 4th ch from hook, dc in each remaining ch across. (7 sts)

Row 2: Ch 3, turn, [ch 1, sk next st, dc in next st] 3 times. (7 sts: 4 dc + 3 ch-1 sps)

Rows 3–122: Ch 3, turn, [ch 1, sk next ch-1 sp, dc in next dc] 3 times. (7 sts)

Row 123: Ch 3, turn, dc in each ch-1 sp and dc across. (7 sts)

Fasten off. The strip has 123 rows: a solid row at each end and 121 mesh rows in between. It should measure 1.75 x 61.5 in (4.4 x 156.2 cm). Since all strips have the same number of rows, every seam lines up row for row.

Make All Pieces

  • Color A (yellow): 5 diamond strips, 17 sts x 123 rows each
  • Color B (blue): 6 mesh strips, 7 sts x 123 rows each

Layout (left to right, RS facing, Row 1 at the bottom):

| B | Y | B | Y | B | Y | B | Y | B | Y | B |
  7   17  7   17  7   17  7   17  7   17  7   = 127 sts

Check the width: 6 x 1.75 in + 5 x 4.25 in = 10.5 + 21.25 = 31.75 in (80.6 cm).

Before joining, block all strips lightly to the same length (see Final Blocking, steps 1–3). This keeps the seams from rippling.

Joining

Method: Slip-stitch seam on the WS, worked in Color A.

  1. Place two neighboring strips RS together, with their Row 1 edges matching at the bottom.
  2. Join Color A at the bottom corner, working through both thicknesses.
  3. Work 2 sl st into each row end along the seam. That is 123 rows x 2 = 246 sl st per seam. Place one sl st around the lower half of the dc post and one around the upper half.
  4. Fasten off. Join the next strip in the same way until all 10 seams are done.

Stitch-to-stitch logic: Both strips have exactly 123 rows, so each row end matches the row end next to it. If a strip runs one row short, fix it before you seam. Don’t ease the difference into the seam.

Tension: Keep the slip stitches loose, about the same height as your dc posts. Tight seams pull the curtain shorter along the joins, and the stripes ripple. If your seams tend to be tight, go up one hook size for the joining only.

Size checkpoint: Lay the joined curtain flat. It should measure 31.75 x 61.5 in (80.6 x 156.2 cm).

The seam doesn’t add any stitches to the width. Across the top and bottom you have 6 x 7 + 5 x 17 = 42 + 85 = 127 sts.

Border

Border gauge: 16 sc = 4 in (10.2 cm), which is 4 sc per inch. That matches the dc stitch gauge, so 127 sc spread over exactly 31.75 in (80.6 cm).

Work all borders in Color A.

Bottom Edge

Row 1 (RS): Hold the curtain RS facing with Row 1 at the top. Join yarn in the first foundation st at the right. Ch 1, then work 1 sc into the base of each foundation st across. (127 sc)

Row 2 (scallops): Ch 1, turn. Sc in first sc, sk 2 sts, shell in next st, sk 2 sts, sc in next st; rep from * 20 more times. (21 shells; 21 x 5 dc + 22 sc = 127 sts)*

Fasten off.

Why the math works: Each scallop uses 6 sts (sc plus 2 skipped, shell, 2 skipped), and you need 1 extra sc to finish the row. Since 127 = 6 x 21 + 1, the scallops come out exactly even, with a sc at both corners.

Top Edge

Row 1 (RS): Hold the curtain RS facing with Row 123 at the top. Join yarn in the first st at the right. Ch 1, sc in each st across. (127 sc)

Fasten off.

Side Edges

One row on each long side: Hold the curtain RS facing. Join yarn at the top corner of one side.

  • Ch 1, work 1 sc in the end of the top sc row.
  • Work 2 sc in each dc row end. (246 sc)
  • Work 1 sc in the end of the bottom sc row, and stop before the scallop row.
  • Total: 248 sc.

Repeat on the other side, starting from the bottom corner.

Why the math works: The side covers 61.5 in of strip plus 0.25 in for each sc border row, which comes to 62 in (157.5 cm). At 4 sc per inch, 62 in x 4 = 248 sc. The edge lies flat and doesn’t flare.

Tabs (make 6)

Place one tab over each blue strip. Along the 127 top sc, the blue strips sit on sts 1–7, 25–31, 49–55, 73–79, 97–103, and 121–127.

Row 1: With RS facing, join Color A in the first st of a blue section. Ch 1, sc in the same st and in the next 6 sts. (7 sc)

Rows 2–27: Ch 1, turn, sc in each st across. (7 sc)

Fasten off, leaving a 12-in (30.5 cm) tail. Each tab should measure 1.75 x 6 in (4.4 x 15.2 cm).

Fold each tab to the WS and whipstitch its last row along the back of Row 123. This makes a loop about 3 in (7.6 cm) tall, which fits rods up to about 1.5 in (3.8 cm) in diameter.

Final size: 32.25 in (81.9 cm) wide (31.75 in plus 0.25 in on each side) by 62.5 in (158.8 cm) long (61.5 in plus 0.25 in at the top and 0.75 in at the bottom).

Final Blocking

  1. Weave in all ends, running them along seams or through the solid dc sections. Don’t carry ends across the mesh, where they would show.
  2. Soak the curtain in cool water for 15 minutes, then press the water out gently. Don’t wring it.
  3. Roll it in a large towel to remove excess water.
  4. Lay it flat. Pin the long edges to 62.5 in (158.8 cm) and the top and bottom to 32.25 in (81.9 cm).
  5. Pin the center of each shell along the bottom so the scallops spread evenly.
  6. Pin the blue mesh squares square, and open each eyelet diamond with your fingertip.
  7. Let it dry completely, usually 24–48 hours. Then hang it for a day so the weight can even out the drape.

Final Quality-Control Checklist

  • 11 strips in the order B-Y-B-Y-B-Y-B-Y-B-Y-B
  • Every strip has 123 rows, and every yellow strip has 15 diamonds
  • Diamonds line up across the curtain at the same heights
  • 127 sts across the top and across the bottom
  • 21 even scallops along the bottom
  • 248 sc on each side edge
  • 6 tabs, each centered over a blue strip and sewn securely
  • Seams lie flat, with no puckering or rippling
  • Blocked size is 32.25 x 62.5 in (81.9 x 158.8 cm)

Troubleshooting

Strips are different lengths: Count rows, not inches. Re-block any strip that’s still short. If the row count is off, add or remove rows at the top.

Diamonds lean to one side: You probably missed the turning ch-3 as a stitch. Count 17 sts after every diamond row.

Mesh looks crooked: Make sure each ch-1 covers the skipped ch-1 sp and each dc goes into a dc.

Seams pucker: Rework them with looser slip stitches or a larger hook.

Scallops don’t come out even: Confirm you have 127 sc in Row 1 before you start the scallops.

Side edge flares: Go down to 3 sc per 2 row ends, and recount so the total stays proportional.

Curtain stretches after hanging: This is normal with cotton. Re-block it and let it dry flat.

Care

Hand wash in cool water, or machine wash on a gentle cycle in a mesh bag. Dry flat and re-block as needed. Keep the curtain away from harsh direct sun for long periods so the blue doesn’t fade.

Striped crochet blanket with yellow diamond lace and navy dotted sections hangs from wooden rod by window.

Final Notes

Each stage builds on the measurements of the one before it. The gauge of 4 sts and 2 rows per inch gives yellow strips of 4.25 in (10.8 cm) and blue strips of 1.75 in (4.4 cm), both 61.5 in (156.2 cm) long. Eleven joined strips make a 31.75 in (80.6 cm) panel with 127 sts across, which fits exactly 21 scallops. The side edges add 0.25 in each, and the top and bottom borders bring the length to 62.5 in (158.8 cm). If you check each number as you reach it, the finished curtain will hang straight and even.

Happy crocheting!

Leave a Comment