The Teal Rosette Tower is a three-tier hanging storage piece for spare toilet rolls. Three octagonal baskets are stacked on two slim straps and hang from a wooden ring. Each basket wall is made of eight lacy flower squares, and each basket sits on a solid, sturdy base.
The sample uses one deep teal cotton, which gives the lace a crisp, sculpted look against light bathroom walls. A single color also keeps the focus on the stitch texture: open eight-petal rosettes framed by tight single crochet.
This pattern uses US crochet terms. Each basket measures 7.2 in (18.3 cm) across the flat sides, 7.8 in (19.8 cm) across the corners and 3.6 in (9.1 cm) tall. The assembled holder is about 25 in (63.5 cm) tall including the ring.
Construction is modular. You work 3 octagon bases, 24 square motifs and 2 straps. You join the motifs into rings, crochet each ring onto a base, add a rim, then sew the baskets to the straps and fold the strap ends over the ring.
Finished Size and Construction
- Finished size: about 7.8 in (19.8 cm) wide × 25 in (63.5 cm) tall
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: worsted-weight (#4) cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 29 (3 bases, 24 motifs, 2 straps), plus 1 wooden ring
- Layout: 3 baskets in a vertical column, each with 8 motifs around 1 octagon base
- Motif size: 3 in × 3 in (7.6 cm × 7.6 cm), 15 sts per side
- Basket size before rim: 7.2 in (18.3 cm) across flats, 3.2 in (8.1 cm) tall including the base join
- Rim depth: 2 rounds, about 0.4 in (1.0 cm)
Materials
Choose a smooth, firm worsted-weight cotton or cotton blend. Cotton holds its shape well, and the baskets need to stand upright without sagging. Avoid very soft or fuzzy yarns.
- Deep teal: 250 g, about 425 m (465 yd)
Quantity is about 190 g for the motifs, bases, joins, rims and straps, plus a margin for your gauge and for swatching.
Tools:
- 4.0 mm (G-6) crochet hook
- 2.5 in (6.4 cm) wooden ring
- Tapestry needle
- 12 or more locking stitch markers
- Measuring tape
- Blocking mats and rust-proof pins
- Spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sp – space
- st(s) – stitch(es)
- rep – repeat
- beg – beginning
Special stitches:
- Beg cluster (beg cl): Ch 2, dc in the same st. This counts as 1 cluster.
- 3-dc cluster (cl): [Yarn over, insert hook in st, yarn over, pull up a loop, yarn over, pull through 2 loops] 3 times in the same st. Yarn over and pull through all 4 loops on hook.
Gauge and Checkpoints
Gauge: 20 sts = 4 in (10.2 cm), in both sc and hdc, worked firmly.
Make one complete motif before anything else. It is your real gauge swatch.
Motif checkpoints:
- After Rnd 2: about 1.75 in (4.4 cm) across
- After Rnd 3: about 2.6 in (6.6 cm) across
- After Rnd 4: 3 in × 3 in (7.6 cm × 7.6 cm)
Base checkpoints (length of one side):
- After Rnd 5: 1 in (2.5 cm)
- After Rnd 10: 2 in (5.1 cm)
- After Rnd 15: 3 in (7.6 cm), with the base 7.2 in (18.3 cm) across flats
The base side must match the motif side. If your motif comes out bigger than 3 in (7.6 cm), go down half a hook size. If it is smaller, go up half a size. Do not add or remove rounds: the joining depends on 15 sts per side on every piece.

Square Motif (make 24)
Rnd 1: Make a magic ring, ch 1, work 8 sc in the ring, then sl st to the first sc. (8 sc)
Rnd 2: Beg cl in the same st, ch 3. Cl in the next sc, ch 3; rep from * 6 more times. Sl st to the top of beg cl. (8 clusters, 8 ch-3 sps)*
These are the eight petals. The ch-3 spaces make the open gaps between them.
Rnd 3: Sl st into the first ch-3 sp. Ch 3 (counts as dc), then work (2 dc, ch 2, 3 dc) in the same sp for the first corner. Ch 1, 3 dc in the next sp, ch 1. (3 dc, ch 2, 3 dc) in the next sp, ch 1, 3 dc in the next sp, ch 1; rep from * 2 more times. Sl st to the top of the beg ch-3. (36 dc, 4 ch-2 corner sps, 8 ch-1 sps)*
This round turns the circle into a square: 4 spaces become corners and 4 become side centers.
Rnd 4: Ch 1. Sc in the same st and in each dc and each ch-1 sp across to the corner. Work 3 sc in the ch-2 corner sp. Sc in each dc and ch-1 sp to the next corner, then 3 sc in the corner sp; rep from * around. Sl st to the first sc. Fasten off and leave a 12 in (30.5 cm) tail on 8 of the motifs for seaming. (56 sc)*
Count check: 36 sc in the dc + 8 sc in the ch-1 sps + 12 sc in the corners = 56. Each side has 15 sts, counting the center sc of each corner group as that side’s corner st. 4 sides × 15 − 4 shared corners = 56.
Mark the 4 corner sts on each motif.
Octagon Base (make 3)
Work in continuous rounds, joining each round with a sl st. Ch 2 does not count as a stitch. Each round adds 8 sts, one increase at each corner.
Rnd 1: Make a magic ring, ch 2, work 8 hdc in the ring, sl st to the first hdc. (8 hdc)
Rnd 2: Ch 2, 2 hdc in each st around, sl st. (16 hdc)
Rnd 3: Ch 2, hdc in the next st, 2 hdc in the next st; rep from * 7 more times, sl st. (24 hdc)*
Rnds 4–15: Ch 2, *hdc in each of the next (round number − 2) sts, 2 hdc in the next st; rep from * 7 more times, sl st. Each round’s total is 8 × the round number.
- Rnd 4: 32 hdc
- Rnd 5: 40 hdc
- Rnd 6: 48 hdc
- Rnd 7: 56 hdc
- Rnd 8: 64 hdc
- Rnd 9: 72 hdc
- Rnd 10: 80 hdc
- Rnd 11: 88 hdc
- Rnd 12: 96 hdc
- Rnd 13: 104 hdc
- Rnd 14: 112 hdc
- Rnd 15: 120 hdc (8 sides of 15 sts)
Fasten off. Base corners do not share a stitch. Each 2-hdc increase is split, with one hdc ending one side and one hdc starting the next. Mark the first st of each side.
Straps (make 2)
Work the straps lengthwise so the length is easy to control.
Row 1: Ch 126. Sc in the 2nd ch from the hook and in each ch across. (125 sc)
Rows 2–4: Ch 1, turn, sc in each st across. (125 sc)
Fasten off. Each strap measures 25 in × 0.75 in (63.5 cm × 1.9 cm). Check: 125 sts ÷ 5 sts per in = 25 in.
Make All Pieces
All pieces are deep teal:
- 24 square motifs (8 per basket)
- 3 octagon bases
- 2 straps
Layout for one basket wall (opened flat):
[M1][M2][M3][M4][M5][M6][M7][M8] → M8 joins back to M1
Hanging column (side view):
(ring)
/ \
strap strap
[ Basket 1 ] top
3 in gap
[ Basket 2 ]
3 in gap
[ Basket 3 ] bottom
Joining
Joining the walls
Place 2 motifs right sides together. With the tapestry needle, whipstitch through the back loops only, matching each st to the opposite st from corner to corner: 15 sts to 15 sts. Join M1 through M8 into a strip, then join M8 to M1 to close the ring. That is 8 seams per basket.
Keep the tension even and snug, but do not let the seam pucker. Each seam should lie flat and be the same length as a motif side, 3 in (7.6 cm).
Checkpoint: The wall circumference is 8 × 3 in = 24 in (61.0 cm).
Joining wall to base
Hold the base and wall with wrong sides together, so the base sits inside the bottom edge of the wall. Line up each motif’s bottom edge with one base side. Pin at the 8 seams and the 8 base corners.
Join the yarn at a seam. Ch 1, then sc through both layers in every matched pair: each wall st with one base hdc. Sl st to the first sc. (120 sc)
Math check: wall bottom edge = 8 motifs × 15 sts = 120. Base Rnd 15 = 8 sides × 15 = 120. Every stitch has exactly one partner, with nothing added at the seams.
The sc join forms a neat ridge along the bottom of the basket and adds about 0.2 in (0.5 cm) of height.
Checkpoint: 7.2 in (18.3 cm) across flats and 3.2 in (8.1 cm) tall.
Border (Top Rim)
Border gauge: 5 sc per in (2.5 cm), the same as the motif edge.
Rnd 1: Join the yarn at a seam along the top edge. Ch 1, then sc in each of the 15 top sts of every motif. Sl st to the first sc. (120 sc; 15 per side)
Rnd 2: Ch 1, sc in each st around, sl st. Fasten off. (120 sc; 15 per side)
Why the math works: The rim follows a vertical tube, not a flat shape that turns outward. The corners stay where they are, so you do not need any corner increases. Each side keeps the motif’s own count of 15 sts, which equals 3 in (7.6 cm) at 5 sts per in. Adding stitches would make the rim flare, and skipping stitches would pull it inward.
Checkpoint: The finished basket is 3.6 in (9.1 cm) tall. Repeat for all 3 baskets.
Attaching the straps and ring
- Lay both straps flat, parallel and 7.2 in (18.3 cm) apart.
- Place the bottom basket so one strap lines up with seam M1/M2 and the other with seam M5/M6. These seams are directly opposite each other. The bottom of the basket should sit level with the strap ends.
- Whipstitch both long edges of each strap to the basket, over the full 3.6 in (9.1 cm) height. This covers 0–3.6 in (0–9.1 cm) of each strap.
- Leave a 3 in (7.6 cm) gap. Attach the middle basket from 6.6 in to 10.2 in (16.8 cm to 25.9 cm).
- Leave another 3 in (7.6 cm) gap. Attach the top basket from 13.2 in to 16.8 in (33.5 cm to 42.7 cm).
- You now have 8.2 in (20.8 cm) of free strap above the top basket on each side. Fold the last 1.5 in (3.8 cm) of each strap over the wooden ring and sew it to itself.
This leaves a V about 5.8 in (14.7 cm) high. Sew through the strap edges firmly, because the straps carry all the weight.
Final Blocking
- Weave in all ends along seams or inside the rims.
- Lightly spray each basket until damp but not soaked.
- Stuff each basket with a toilet roll or a towel to hold the octagon shape.
- Pinch each wall corner to sharpen the eight angles.
- Press the base flat on a mat.
- Smooth the rosettes so the petals open evenly.
- Let everything dry completely, upright.
- If you want firmer walls, use a light fabric stiffener and dry the baskets the same way.
Final Quality-Control Checklist
- Every motif is 3 in (7.6 cm) square, with 56 sts in Rnd 4.
- Every base has 120 hdc in Rnd 15, with sides of 3 in (7.6 cm).
- Each wall seam has 15 matched sts.
- The base join and both rim rounds each have 120 sc.
- Each basket is 7.2 in (18.3 cm) across flats and 3.6 in (9.1 cm) tall.
- The straps are attached at opposite seams, with 3 in (7.6 cm) gaps.
- The ring is centered and the holder hangs straight.
- No ends are visible on the outside.
Troubleshooting
Base cups upward: Your hdc rows are too tall. Work the hdc lower, or use a smaller hook for the base only. Recheck the side length.
Base ruffles: Your stitches are too tight compared with your row height. Go up half a hook size for the base.
Wall is bigger than the base: The motifs are oversized. Remake them with a smaller hook, or block the base slightly larger before joining.
Rosette petals lean: Check that each cluster is worked into its own sc in Rnd 2 and that every ch-3 has 3 chains.
Rim flares: You probably added stitches. Count 15 per side.
Holder tilts: The straps are attached unevenly. Remeasure the gaps from the strap bottoms and resew.
Baskets sag: Use stiffener or slip a cardboard octagon cut to 7 in (17.8 cm) across flats into each base.
Care
Hand wash in cool water, press out excess water in a towel, and reshape the baskets to dry upright. Remove the wooden ring before washing if possible.

Final Notes
The measurement chain is simple:
- Gauge is 5 sts per in (2.5 cm).
- Each motif side is 15 sts = 3 in (7.6 cm).
- Eight motifs make a 24 in (61.0 cm) wall, which matches a 120-st base 7.2 in (18.3 cm) across flats.
- Two 120-st rim rounds bring each basket to 3.6 in (9.1 cm) tall.
- Three baskets on 25 in (63.5 cm) straps make the finished tower.
Check each link in the chain and the holder will come together cleanly.
Happy crocheting!