The Terracotta Bloom Medallion Strip is a long, narrow panel of six flower medallions stacked in one column. Each medallion has a cream center flower and eight puffy terracotta petals. A smooth cream ring and an open chain lattice frame them, and a crisp single-crochet border and a small hanging loop finish the strip.
The palette is warm and calm: rust-terracotta and soft cream. You can work the border and loop in terracotta for a bold outline, or in cream for a softer, lacier look. Hang several strips side by side from a rod and alternate the two versions to make a door or window curtain. Each strip hangs on its own, so the pattern stays the same no matter how many you make.
This pattern uses US crochet terms. One finished strip measures 4.25 x 21.75 in (10.8 x 55.2 cm), not counting the loop, which adds about 2 in (5.1 cm).
Construction is simple and modular. You crochet six identical square medallions in the round, then join them into a column with a flat slip-stitch seam. Next you work a two-round border around the whole strip, then add the hanging loop.
Finished Size and Construction
- Finished size: 4.25 x 21.75 in (10.8 x 55.2 cm), plus a 2 in (5.1 cm) loop
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: DK (light worsted, #3) cotton or cotton blend
- Hook: 3.5 mm (E-4)
- Number of pieces: 6 medallions per strip
- Layout: 1 column x 6 rows
- Medallion size: 3.5 x 3.5 in (8.9 x 8.9 cm)
- Size before border: 3.5 x 21 in (8.9 x 53.3 cm)
- Border depth: 0.375 in (1.0 cm) on every side
Materials
Yarn: Use a smooth, mercerized or matte DK cotton, about 120 m per 50 g. Cotton shows the puff petals clearly and hangs straight, which matters for a strip that hangs vertically. Avoid fuzzy yarns, because they hide the lattice.
Strip with terracotta border (Version 1):
– Color A, Cream: 40 g (96 m)
– Color B, Terracotta: 35 g (84 m)
Strip with cream border (Version 2):
– Color A, Cream: 50 g (120 m)
– Color B, Terracotta: 25 g (60 m)
For a six-strip curtain like the one pictured (3 of each version): Cream 270 g (648 m), Terracotta 180 g (432 m).
All quantities include a margin of roughly 15% for gauge differences and weaving in ends.
Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Stitch markers (at least 4)
– Scissors
– Blocking mats and rust-proof pins
– Spray bottle
– Ruler or tape measure
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- sp – space
- st(s) – stitch(es)
- FLO / BLO – front loop only / back loop only
- RS / WS – right side / wrong side
Special stitches:
- 2-dc cluster: [Yarn over, insert hook, pull up a loop, yarn over, pull through 2 loops] twice in the same st, then yarn over and pull through all 3 loops on the hook.
- 5-dc cluster (petal): [Yarn over, insert hook in the sp, pull up a loop, yarn over, pull through 2 loops] 5 times, then yarn over and pull through all 6 loops on the hook.
- Beginning petal: Ch 3, then work a 4-dc cluster in the same sp. Together these count as one 5-dc cluster.
Gauge and Checkpoints
Gauge: One finished medallion is 3.5 x 3.5 in (8.9 x 8.9 cm), with 19 sc per side on Round 8. That works out to about 5.4 sc per inch (2.5 cm).
Make one complete medallion before anything else and block it lightly. Check it against these measurements as you go:
- After Round 2 (center flower): about 1.25 in (3.2 cm) across
- After Round 4 (terracotta petals): about 2 in (5.1 cm) across
- After Round 5 (cream ring): about 2.5 in (6.4 cm) across
- After Round 8: 3.5 in (8.9 cm) per side
If your medallion is too big, go down to a 3.25 mm hook. If it’s too small, go up to a 3.75 mm hook. Fix this now: a 0.25 in (0.6 cm) error on one medallion adds up to 1.5 in (3.8 cm) over the length of the strip.

Medallion (Make 6)
Round 1 (A, cream): Make a magic ring, ch 1, work 16 sc into the ring, then sl st to the first sc. Pull the ring closed. (16 sc)
Round 2 (A): Work this round in the FLO only. [(Sl st, ch 2, 2-dc cluster, ch 2, sl st) in the next st, sl st in the next st] 8 times. Fasten off. (8 small cream petals) The back loops of Round 1 stay free for the next round.
Round 3 (B, terracotta): Fold the cream petals forward. Join B with a sl st in the free back loop of any st that had a sl st between petals. Ch 1, then [sc in the BLO of the same st, ch 3, skip the next st] 8 times. Sl st to the first sc. (8 sc, 8 ch-3 sps)
Round 4 (B): Sl st into the first ch-3 sp. Work a beginning petal, then ch 4. [5-dc cluster in the next ch-3 sp, ch 4] 7 times. Sl st to the top of the first cluster and fasten off. (8 puff petals, 8 ch-4 sps) The petals sit behind the cream flower, so you get the layered look.
Round 5 (A): Join A in any ch-4 sp. Ch 1, then [5 sc in the ch-4 sp, sc in the top of the next cluster] 8 times. Sl st to the first sc. (48 sc) This round makes the smooth cream ring.
Round 6 (A): Ch 1, sc in the same st. [Ch 3, skip 2 sts, sc in the next st] 15 times, then ch 3, skip 2 sts, and sl st to the first sc. (16 sc, 16 ch-3 sps)
Round 7 (A, squaring round): Sl st into the first ch-3 sp. Ch 4 (counts as tr), then work (tr, ch 3, 2 tr) in the same sp for the first corner. [Ch 2, dc in the next sp, ch 2, hdc in the next sp, ch 2, dc in the next sp, ch 2, (2 tr, ch 3, 2 tr) in the next sp] 3 times. Ch 2, dc in the next sp, ch 2, hdc in the next sp, ch 2, dc in the next sp, ch 2, then sl st to the top of the beginning ch-4.
(16 tr, 8 dc, 4 hdc, 16 ch-2 sps, 4 corner ch-3 sps)
The tall corners and short middle stitches pull the circle into a square. The ch-2 openings make the lattice.
Round 8 (A, trim round): Ch 1, sc in the same st and in the next tr. [3 sc in the corner ch-3 sp, sc in each of the next 2 tr, 2 sc in the ch-2 sp, sc in the dc, 2 sc in the ch-2 sp, sc in the hdc, 2 sc in the ch-2 sp, sc in the dc, 2 sc in the ch-2 sp, sc in each of the next 2 tr] 4 times. On the last repeat, skip the final “2 tr”, because you already worked them at the start of the round. Sl st to the first sc and fasten off, leaving a 12 in (30.5 cm) tail on one medallion for joining.
Count for Round 8: The 48 stitches and chain-space openings of Round 7 give 60 sc (15 between corners on each side), plus 12 sc from the four 3-sc corners, for 72 sc in total. Each side has 19 sc, counting the center corner st at each end.
Checkpoint: 3.5 x 3.5 in (8.9 x 8.9 cm).
Make All Pieces
For one strip, make 6 medallions. Rounds 1–8 are identical for both versions.
- Per medallion: about 6 g Cream (A) and 3 g Terracotta (B)
- Per strip, medallions only: 36 g Cream and 18 g Terracotta
- The border and loop add the rest, in whichever color you choose for that version.
Layout grid (1 column x 6 rows):
[ M1 ] <- top (loop edge)
[ M2 ]
[ M3 ]
[ M4 ]
[ M5 ]
[ M6 ] <- bottom
Weave in all ends on the WS before joining. Lightly steam or wet-block each medallion to 3.5 in (8.9 cm) square so the edges line up.
Joining
Method: Flat slip-stitch seam in Color A, worked through the back loops.
- Hold M1 and M2 with WS facing each other and the edges lined up.
- Join A in the center corner st of both layers. Work a sl st through the BLO of both layers in each st across, ending in the opposite center corner st. That is 19 sl sts, one for each pair of matching stitches.
- Fasten off. Join M3 to M2 the same way, and continue down the column to M6.
Stitch-to-stitch logic: Each seam pairs 19 stitches on one medallion with 19 on the next, so nothing stretches or bunches. Corner stitches are matched to corner stitches. The front loops left on the RS form a fine ridge, and the meeting corners make small pointed lattice accents.
Tension: Work the slip stitches loosely, about as wide as one sc. A tight seam pulls the strip in at the waist. If your seams pucker, go up one hook size for joining only.
Size checkpoint: 3.5 x 21 in (8.9 x 53.3 cm). Two joined medallions should measure 7 in (17.8 cm), and three should measure 10.5 in (26.7 cm).
Border
Use Color B for Version 1 or Color A for Version 2.
Border gauge: 2 rounds of sc = 0.375 in (1.0 cm). Each round adds 1 sc to every side through the corner increases.
Starting stitch counts:
– Long sides: 6 medallions x 19 sts = 114 sts
– Short sides: 1 medallion x 19 sts = 19 sts
No extra stitches are added at the seams. The corner sts of neighboring medallions are already part of each medallion’s 19.
Around the edge there are 262 separate stitches, because each of the 4 outer corner sts is shared by a long side and a short side: (2 x 114) + (2 x 19) − 4 = 262.
Border Round 1: With RS facing, join in the st after the top-right outer corner. Ch 1, then work 1 sc in each st around and 3 sc in each of the 4 outer corner sts. Sl st to the first sc.
Count: 262 (1 per existing st) + 8 (2 extra at each corner) = 270 sc. That is 116 per long side and 21 per short side, each counting the corner sts at both ends.
Border Round 2: Ch 1, then work 1 sc in each st and 3 sc in each center corner st. Sl st to the first sc.
Count: 270 (1 per existing st) + 8 (2 extra at each corner) = 278 sc. That is 118 per long side and 23 per short side.
Hanging loop: Without fastening off, sl st along the top edge to the 12th st of the short side, which is its center. Ch 24 and sl st in the same st. Work 30 sc into the chain loop, sl st to the base, and fasten off. The loop stands about 2 in (5.1 cm) tall.
Why the math works: At about 5.4 sts per inch, the 23 sts on a short side measure 4.25 in (10.8 cm). The 118 sts on a long side measure 21.75 in (55.2 cm). The border grows by exactly 0.375 in (1.0 cm) on each edge, so the stitch counts and the measurements agree. The edges won’t ruffle or cup.
Final Blocking
- Soak the strip in cool water for 10 minutes. Gently press out the water; don’t wring it.
- Roll it in a towel to remove extra moisture.
- Lay it RS up on blocking mats.
- Pin the four outer corners to a 4.25 x 21.75 in (10.8 x 55.2 cm) rectangle.
- Pin the long edges straight, about every 1 in (2.5 cm).
- Shape each terracotta petal with your fingertips so it puffs up, and open the lattice spaces.
- Pin the hanging loop into an even teardrop shape.
- Let it dry completely before unpinning, usually 12–24 hours.
Final Quality-Control Checklist
- Each medallion measures 3.5 in (8.9 cm) square.
- All 8 cream and 8 terracotta petals are present and evenly spaced.
- Seams use 19 sl sts each and lie flat with no puckering.
- Border Round 2 counts 118 / 23 / 118 / 23 sts.
- The strip measures 4.25 x 21.75 in (10.8 x 55.2 cm).
- The loop sits at the exact center of the top edge.
- All ends are woven in on the WS and trimmed.
Troubleshooting
- Medallion cups: Round 5 may be too tight. Use a larger hook for Rounds 5–6 only.
- Medallion ruffles: Check Round 6. You need exactly 16 ch-3 sps, each skipping 2 sts.
- Corners are rounded: Make your tr stitches taller, or block the corners hard with pins.
- Petals look flat: Pull up each loop of the cluster to dc height before closing it.
- Strip leans or twists: One seam may be tighter than the others. Redo that seam with looser tension.
- Border waves: Recount it. Extra stitches usually creep in at the seams.
Care
Hand wash in cool water with mild detergent, then lay flat to dry. Reshape the petals and lattice while the strip is damp.

Final Notes
Everything in this pattern depends on the measurements matching at each stage. Each medallion is 3.5 in (8.9 cm) square with 19 sts per side. Six joined medallions make a 3.5 x 21 in (8.9 x 53.3 cm) strip with 114 sts on each long side. Two border rounds bring it to 278 sts and a finished 4.25 x 21.75 in (10.8 x 55.2 cm). If the first medallion is the right size, everything after it will be too. Make one strip as a bookmark-style wall hanging, or make several in alternating border colors and hang them side by side as a curtain.
Happy crocheting!