Terracotta Vine Filet Strip Curtain Crochet Pattern

This doorway curtain is made from seven narrow filet crochet strips that hang side by side from a rod. Each strip shows a trailing vine with small leaves in solid blocks, set against an open square mesh. Light passes through the mesh, so the curtain gives a doorway some definition without closing it off.

The strips alternate between two colors, warm terracotta and soft cream. Four strips are terracotta and three are cream, so the curtain starts and ends with terracotta. It has a relaxed boho look and works well with wood, plants, and natural light.

This pattern uses US crochet terms. Each finished strip is 4.5 in (11.4 cm) wide and 72.5 in (184.2 cm) long, plus a 2.5 in (6.4 cm) hanging loop, for a total drop of 75 in (190.5 cm). Hung with small gaps, the seven strips fill a 36 in (91.4 cm) rod span.

Construction is simple. You work each strip flat in rows of filet mesh, following a 14-row vine repeat. Then you add one round of single crochet border and a folded tab at the top. The strips are never sewn together. Each one hangs freely on the rod.

Finished Size and Construction

  • Finished strip size: 4.5 in (11.4 cm) x 72.5 in (184.2 cm), plus the loop
  • Total drop with loop: 75 in (190.5 cm)
  • Skill level: Easy-intermediate (basic filet crochet)
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 5.5 mm (I-9)
  • Number of pieces: 7 separate strips (4 terracotta, 3 cream)
  • Layout: One row of 7 strips, colors alternating, not joined
  • Strip size before border: 4 in (10.2 cm) x 72 in (182.9 cm), which is 5 meshes x 90 rows
  • Border depth: About 0.25 in (0.6 cm) per side
  • Curtain span: 36 in (91.4 cm) with 0.75 in (1.9 cm) gaps between strips

Materials

Use a smooth worsted-weight cotton or cotton blend. Cotton shows clear mesh edges, keeps the squares crisp, and hangs straight without stretching too much. Avoid fuzzy or very stretchy yarns because they blur the vine and make long strips grow.

  • Terracotta: 170 g (about 310 m), enough for 4 strips
  • Cream: 130 g (about 235 m), enough for 3 strips

One strip uses about 35 g (65 m). These quantities include a margin of roughly 15% for the gauge swatch and weaving in ends.

Tools:

  • 5.5 mm (I-9) crochet hook
  • Tapestry needle
  • Stitch markers
  • Rust-proof pins and blocking mats or a long towel
  • Measuring tape
  • Curtain rod or tension rod for a 36 in (91.4 cm) opening

Abbreviations (US Terms)

  • ch = chain
  • sc = single crochet
  • dc = double crochet
  • sk = skip
  • sl st = slip stitch
  • sp = space
  • st(s) = stitch(es)
  • RS / WS = right side / wrong side

Special stitches:

  • Open mesh (OM): Ch 2, sk the next ch-2 sp (or the next 2 dc), dc in next dc.
  • Block (BL): 2 dc in the next ch-2 sp (or 1 dc in each of the next 2 dc), dc in next dc.

Every row starts with ch 3, which counts as the edge dc. Then you work 5 meshes, each one either OM or BL. The last dc of each mesh row goes into the top of the turning ch-3. Every row has 16 sts: 6 posts plus 5 mesh centers of 2 sts each.

Gauge and Checkpoints

Filet gauge: 5 meshes and 5 rows = 4 in (10.2 cm) square. One mesh is 0.8 in (2.0 cm) wide and tall.

Sc gauge (tab): 16 sc and 14 rows = 4 in (10.2 cm).

Make one complete strip before you start the others, and use it as your test piece. Measure it after a few rows. Check again after the first repeat, and compare later strips with this first one.

Checkpoints:

  • After Row 3: 4 in (10.2 cm) wide, 2.4 in (6.1 cm) tall
  • After Row 17 (first repeat done): 13.6 in (34.5 cm) tall
  • After Row 45: 36 in (91.4 cm) tall
  • After Row 90: 72 in (182.9 cm) tall
  • After the border: 4.5 in (11.4 cm) x 72.5 in (184.2 cm)

If your strip is too wide or your rows are too tall, go down a hook size. If it is too narrow or the rows are too short, go up a hook size. Since the strips are long, being off by just 0.1 in (0.3 cm) per row adds up to 9 in (22.9 cm) over 90 rows. Do not skip the row-height check.

Terracotta crochet with open lattice stitching transitions to denser textured section on pale background.

Strip Pattern

With your chosen color, ch 20.

Row 1 (RS): Dc in 8th ch from hook. The 7 skipped chs count as the edge dc plus ch-2. Ch 2, sk 2 ch, dc in next ch 4 times. Turn. (5 OM; 16 sts)

Row 2: Ch 3, 5 OM. For the last dc, work into the 5th of the 7 skipped chs at the corner, which is the top of the edge post. Turn. (5 OM; 16 sts)

Row 3: Ch 3, 5 OM. Turn. (16 sts)

Rows 1–3 form the open bottom band. From Row 4 onward, the vine repeat begins.

Vine Repeat (14 rows)

Rows are listed in working order. Even rows go from left to right as seen from the RS, and odd rows go from right to left. The vine stays 1 block wide. Each leaf is 2 blocks wide and 3 rows tall, and leaves alternate sides.

  • Row 4: Ch 3, 2 OM, 1 BL, 2 OM.
  • Row 5: Ch 3, 1 OM, 2 BL, 2 OM. (right leaf begins)
  • Row 6: Ch 3, 2 OM, 3 BL.
  • Row 7: Ch 3, 3 BL, 2 OM. (right leaf ends)
  • Row 8: Ch 3, 2 OM, 1 BL, 2 OM.
  • Row 9: Ch 3, 1 OM, 1 BL, 3 OM. (vine steps right)
  • Row 10: Ch 3, 3 OM, 1 BL, 1 OM.
  • Row 11: Ch 3, 2 OM, 1 BL, 2 OM. (vine returns to center)
  • Row 12: Ch 3, 1 OM, 2 BL, 2 OM. (left leaf begins)
  • Row 13: Ch 3, 2 OM, 3 BL.
  • Row 14: Ch 3, 3 BL, 2 OM. (left leaf ends)
  • Row 15: Ch 3, 2 OM, 1 BL, 2 OM.
  • Row 16: Ch 3, 1 OM, 1 BL, 3 OM. (vine steps left)
  • Row 17: Ch 3, 3 OM, 1 BL, 1 OM.

Every row ends with a turn and has 16 sts. Each block adds 2 dc and removes 2 ch, so the count never changes.

Chart view (RS facing, columns 1–5 left to right; X = block, . = open):

Row 17:  . X . . .
Row 16:  . X . . .
Row 15:  . . X . .
Row 14:  X X X . .
Row 13:  X X X . .
Row 12:  . X X . .
Row 11:  . . X . .
Row 10:  . . . X .
Row 9:   . . . X .
Row 8:   . . X . .
Row 7:   . . X X X
Row 6:   . . X X X
Row 5:   . . X X .
Row 4:   . . X . .

Rows 18–87: Repeat Rows 4–17 five more times. That makes 6 repeats, with 12 leaves in total.

Rows 88–90: Ch 3, 5 OM. Turn. (16 sts each)

Do not fasten off. The strip measures 4 in (10.2 cm) x 72 in (182.9 cm).

Make All Pieces

Make 7 strips following the pattern above:

  • Terracotta: 4 strips
  • Cream: 3 strips

Layout (left to right, facing the curtain from the room):

[T] [C] [T] [C] [T] [C] [T]

T = terracotta, C = cream. All strips hang with the RS facing the room and the vine starting at the bottom.

Hanging (No Joining)

These strips are not sewn or crocheted together. Each one hangs by its own loop, so the curtain moves and parts easily when someone walks through.

Slide the strips onto the rod in layout order. Space them evenly so there is about 0.75 in (1.9 cm) between each pair. Seven strips at 4.5 in (11.4 cm) each make 31.5 in (80.0 cm) of fabric, and six gaps of 0.75 in (1.9 cm) add 4.5 in (11.4 cm), for a total of 36 in (91.4 cm).

Size checkpoint: Before hanging, lay all seven strips side by side. Their bottom edges should line up within 0.5 in (1.3 cm). If one strip is longer, re-block it or redo the last open rows.

Border

Border gauge: Along the long edges, work 2 sc around each row-end post, which gives 10 sc per 4 in (10.2 cm) of length. Along the short edges, work 1 sc per stitch.

Rnd 1 (RS): Continuing from Row 90, ch 1. Work 3 sc in the first st (corner). Sc in each of the next 14 sts, working 1 sc into each dc and each ch. Work 3 sc in the last st (corner).

Rotate to the long edge. Work 2 sc around each of the 90 row-end posts. (180 sc)

Along the foundation chain, work 3 sc in the first base ch (corner), sc in each of the next 14 base chs, then 3 sc in the last base ch (corner).

Work 2 sc around each of the 90 row-end posts on the second long edge. (180 sc)

Sl st to the first sc. Do not fasten off if you are starting the tab right away. Otherwise, fasten off.

Counts per side:

  • Each short edge: 14 sc between corners
  • Each long edge: 180 sc between corners
  • Each corner: 3 sc
  • Total: 14 + 14 + 180 + 180 + (4 x 3) = 400 sc

Why the math works: The 16 short-edge sts get 1 sc each. The first and last sts each become a 3-sc corner group, which leaves 14 sc between. Along the sides, 2 sc for each 0.8 in (2.0 cm) row matches the sc gauge of 10 sc per 4 in (10.2 cm), so the edge lies flat without ruffling or pulling in. The border adds about 0.25 in (0.6 cm) on every side, so the strip becomes 4.5 in (11.4 cm) x 72.5 in (184.2 cm).

Hanging Tab

With the RS facing and the top short edge (worked over Row 90) at the top, skip the corner group and the first 3 sc. Join yarn in the 4th sc of the 14.

Row 1: Ch 1, sc in the same sc and in each of the next 7 sc. Turn. (8 sc)

Rows 2–18: Ch 1, sc in each sc. Turn. (8 sc)

Fasten off, leaving a 12 in (30.5 cm) tail. The tab is about 2 in (5.1 cm) wide and 5.1 in (13.0 cm) long. Fold it to the WS and whipstitch the last row to the base of Row 1. This forms a loop about 2.5 in (6.4 cm) tall. There should be 3 border sc left on each side of the tab.

Final Blocking

  1. Weave in all ends along the border or inside solid blocks, where they will not show through the mesh.
  2. Soak each strip in cool water for 15 minutes, then gently press out the water. Do not wring.
  3. Roll each strip in a towel to remove extra moisture.
  4. Lay the strip flat on mats or a long towel. Pin it to 4.5 in (11.4 cm) wide and 72.5 in (184.2 cm) long, working one 12 in (30.5 cm) section at a time.
  5. Use your fingers to square every mesh opening, especially near the leaves, since blocks tend to pull in.
  6. Pin the tab flat with the loop open.
  7. Let it dry completely before unpinning. Block all seven strips to the same measurements.

Final Quality-Control Checklist

  • Each strip has 90 rows and 16 sts per row
  • Each strip has 6 vine repeats with 12 leaves, alternating right and left
  • Open bands of 3 rows at the top and bottom
  • Border total is 400 sc with 3 sc in each corner
  • Each tab is 8 sc wide and 18 rows long, centered with 3 sc on each side
  • Strips measure 4.5 in (11.4 cm) x 72.5 in (184.2 cm) after blocking
  • There are 4 terracotta and 3 cream strips, hung T-C-T-C-T-C-T
  • All ends are woven in securely

Troubleshooting

Mesh looks rectangular instead of square: Rows are too tall or too short. Wrap the yarn more firmly or loosely on your dc, or change the hook size.

Strip leans or twists: You may be missing the final dc into the turning ch. Count to 16 sts at the end of every row.

Leaves look lopsided: Check the working direction. Even rows go left to right as seen from the RS, so compare each row with the chart.

Border ruffles: Use 3 sc per 2 row-ends instead of 2 per row, but use the same rule on all seven strips.

Strips are different lengths: Measure them hanging, not just flat. Re-block a longer strip so it matches the others.

Care

Hand wash in cool water with mild soap and dry flat to keep the strips their correct length. Do not hang them wet, since the weight of the water will stretch the cotton.

Rust-toned and cream crochet curtain panels with geometric lace patterns hang from a dark wooden rod.

Final Notes

The measurement chain is straightforward. One mesh is 0.8 in (2.0 cm), and 5 meshes make a 4 in (10.2 cm) width. Ninety rows make 72 in (182.9 cm). The border adds 0.25 in (0.6 cm) per side, giving 4.5 in (11.4 cm) x 72.5 in (184.2 cm), and the tab adds a 2.5 in (6.4 cm) loop for a 75 in (190.5 cm) drop. Seven strips with six 0.75 in (1.9 cm) gaps make a 36 in (91.4 cm) curtain. Get the gauge right on the first strip, and the other six will match.

Happy crocheting!

Leave a Comment