This little ornament captures the look of a sprig of winter berries tied with a ribbon. Six round red berries hang on brown stems of different lengths. Four textured dark green leaves frame them, and a soft cream bow sits on top. A brown loop makes it ready to hang on the tree.
The colors are classic and warm: berry red, deep pine green, chestnut brown and a creamy off-white. The style is neat and slightly rustic. Fine cotton gives crisp stitches and firm berries that keep their shape.
The finished ornament measures about 4 in (10.2 cm) tall from the top of the bow to the bottom berry and 3.5 in (8.9 cm) wide across the leaves. The hanging loop adds about 2 in (5.1 cm), so the total height is about 6 in (15.2 cm). All instructions use US crochet terms.
You’ll make each part separately: six stuffed berries worked in a spiral, four leaves worked around a foundation chain, six slip-stitch cord stems, a cord loop and a cord bow. Then you’ll bundle the stems, wrap them, sew the leaves behind and tie on the bow.
Finished Size and Construction
- Finished size: 3.5 in (8.9 cm) wide × 4 in (10.2 cm) tall, plus a 2 in (5.1 cm) loop. Total height is 6 in (15.2 cm).
- Skill level: Easy / advanced beginner
- Terminology: US crochet terms
- Yarn weight: Fingering (#1) cotton
- Hook: 2.0 mm for most parts, 2.5 mm for the bow
- Number of pieces: 1 ornament made from 18 parts: 6 berries, 4 leaves, 6 stems, 1 loop and 1 bow
- Layout: Berries in a 2-1-2-1 cluster with 2 upper and 2 lower leaves
- Piece size: Berry 0.75 in (1.9 cm); leaf 1.75 in × 1 in (4.4 cm × 2.5 cm)
- Leaf size before edging: 1.5 in × 0.875 in (3.8 cm × 2.2 cm)
- Edging depth: About 0.0625 in (0.2 cm) per side, one slip-stitch round
Materials
Use a smooth mercerized cotton in fingering weight. It shows stitch texture clearly and stuffs firmly. Avoid fuzzy or very splitty yarns, because the berries are small and need clean decreases.
- Red (berries): 10 g, about 34 m
- Dark green (leaves): 10 g, about 34 m
- Brown (stems, loop, wrap): 5 g, about 17 m
- Cream (bow, worked with 2 strands held together): 5 g, about 17 m
All quantities include a margin of about 30%, so you have extra for gauge swatches and sewing tails.
Tools:
– 2.0 mm crochet hook
– 2.5 mm crochet hook
– Small amount of fiberfill, or red yarn scraps for stuffing
– Tapestry needle with a sharp tip
– Small scissors
– Stitch marker
– Ruler or tape measure
– Pins and a foam blocking mat
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- inc – 2 sc in the same stitch
- dec – single crochet 2 together (invisible decrease: insert hook in front loops only of the next 2 sts, yarn over, pull through 2 loops, yarn over, pull through 2 loops)
- MR – magic ring
- BLO – back loop only
- st(s) – stitch(es)
- sp – space
Special stitch – slip-stitch cord: Chain the stated number. Starting in the back bump of the 2nd ch from the hook, sl st in the back bump of each ch across. This gives a firm, round cord that doesn’t stretch.
Gauge and Checkpoints
Gauge: 8 sc and 9 rounds = 1 in (2.5 cm) in spiral sc with the 2.0 mm hook. Chains and slip-stitch cord measure 8 sts = 1 in (2.5 cm).
Test one berry and one leaf before making the rest.
- Berry after Rnd 3: The flat circle measures about 0.625 in (1.6 cm) across.
- Finished berry: 0.75 in (1.9 cm) in diameter after stuffing.
- Leaf after Rnd 1: 1.5 in × 0.875 in (3.8 cm × 2.2 cm).
- Leaf after edging: 1.75 in × 1 in (4.4 cm × 2.5 cm).
- Shortest stem (10 sts): 1.25 in (3.2 cm).
If your parts are too big, go down to a 1.75 mm hook. If they’re too small or the berries feel stiff and hard to close, go up to a 2.25 mm hook. Check the stems last: a cord that’s off by more than 0.125 in (0.3 cm) will throw off the cluster shape.

Berries (Make 6)
With red and the 2.0 mm hook. Work in a continuous spiral and mark the first stitch of each round.
Rnd 1: 6 sc in MR. (6 sts)
Rnd 2: Inc in each st around. (12 sts)
Rnd 3: (Sc in next st, inc in next st) 6 times. (18 sts)
Checkpoint: the flat circle measures 0.625 in (1.6 cm).
Rnd 4: Sc in each st around. (18 sts)
Rnd 5: Sc in each st around. (18 sts)
Rnd 6: (Sc in next st, dec) 6 times. (12 sts)
Stuff firmly. Push the stuffing into the bottom so the magic ring forms a small dimple. That dimple is the visible “blossom end” of the berry.
Rnd 7: Dec 6 times. (6 sts)
Fasten off and leave an 8 in (20.3 cm) tail. Thread the tail through the front loops of the 6 remaining sts and pull them closed. Leave the tail hanging, because the stem attaches here.
Checkpoint: the berry is 0.75 in (1.9 cm) across and 7 rounds tall.
Leaves (Make 4)
With dark green and the 2.0 mm hook. Each leaf is worked around both sides of a foundation chain. The chain becomes the central vein, and the change in stitch heights makes the diagonal ribs and the pointed oval shape.
Foundation: Ch 13.
Rnd 1, Side A: Work into the 2nd ch from the hook (this is the tip end). Sc in the 2nd ch from the hook, hdc in the next 2 ch, dc in the next 5 ch, hdc in the next 2 ch, sc in the next ch, sl st in the last ch. (12 sts)
Base turn: Ch 1. Rotate the work so you can reach the free loops on the other side of the foundation.
Rnd 1, Side B: Working in the free loops, sl st in the first ch, sc in the next ch, hdc in the next 2 ch, dc in the next 5 ch, hdc in the next 2 ch, sc in the last ch. (12 sts)
Tip: Ch 2, then sl st in the first sc of Side A.
Round 1 total: 24 sts (12 per side), plus the base ch-1 and the tip ch-2 sp.
Checkpoint: 1.5 in × 0.875 in (3.8 cm × 2.2 cm).
Don’t fasten off. The edging comes next (see Border).
Make All Pieces
Quantities per color:
– Red: 6 berries
– Dark green: 4 leaves
– Brown: 6 stems, 1 hanging loop and a 12 in (30.5 cm) strand for the wrap
– Cream: 1 bow
Stems (brown, 2.0 mm hook, slip-stitch cord):
– Stems A (make 2): Ch 11, then 10 sl st. Length 1.25 in (3.2 cm).
– Stem B (make 1): Ch 15, then 14 sl st. Length 1.75 in (4.4 cm).
– Stems C (make 2): Ch 19, then 18 sl st. Length 2.25 in (5.7 cm).
– Stem D (make 1): Ch 23, then 22 sl st. Length 2.75 in (7.0 cm).
Leave a 6 in (15.2 cm) tail at both ends of each stem.
Hanging loop (brown, 2.0 mm hook): Ch 41, then 40 sl st. Length 5 in (12.7 cm). Folded in half with 0.5 in (1.3 cm) of each end tucked into the bundle, it makes a loop 2 in (5.1 cm) tall.
Bow (cream, 2 strands held together, 2.5 mm hook): Ch 37, then 36 sl st. At 6 sts per inch with the doubled yarn, the cord is 6 in (15.2 cm) long.
Layout grid (front view, B = berry, letter = stem):
[ loop ]
[ bow ]
[leaf] | wrap | [leaf]
B(A) B(A) row 1 – 1.25 in (3.2 cm)
[leaf] B(B) [leaf] row 2 – 1.75 in (4.4 cm)
B(C) B(C) row 3 – 2.25 in (5.7 cm)
B(D) row 4 – 2.75 in (7.0 cm)
Joining
Berries to stems: Thread the berry’s closing tail onto the needle. Insert the bottom end of one stem 0.125 in (0.3 cm) into the closed hole. Sew through the cord and the 6 closing stitches, going around twice. Each stitch catches one cord stitch and one berry stitch, so the stem sits centered and doesn’t tilt. Hide the tail inside the berry.
Bundle: Line up the top ends of all 6 stems. Lay the 2 Stems A on the outside and Stem D in the center. Fold the hanging loop in half and put both ends into the middle of the bundle, so 0.5 in (1.3 cm) of each end sits below the fold point.
Wrap: With the 12 in (30.5 cm) brown strand, wrap tightly around the bundle 6 times just below the loop, covering 0.25 in (0.6 cm). Pass the needle up under the wraps and trim. Keep the wraps firm but not crushing. They should hold the stems without bunching the cords.
Leaves: Turn the cluster face down. Sew the base of each upper leaf to the back of the bundle just below the wrap, angled about 30° up from horizontal. Sew the lower leaves 1 in (2.5 cm) below the wrap, angled down about 45°, so they peek out between the row 2 and row 3 berries. Sew through the base ch-1 and 2 sts on each side of it, from behind only, so no stitches show on the front.
Bow: Tie the cream cord into a bow with 2 loops about 0.75 in (1.9 cm) long and tails about 0.5 in (1.3 cm) long. Wrap the center knot once more with cream and sew it over the brown wrap.
Size checkpoint: the cluster is 4 in (10.2 cm) from the top of the bow to the bottom of berry D, and 3.5 in (8.9 cm) across the upper leaves. The math: 2.75 in stem + 0.75 in berry + 0.5 in wrap and bow = 4 in (10.2 cm).
Border
The border is a slip-stitch edging round on each leaf. It outlines the leaf, sharpens the tip and adds only about 0.125 in (0.3 cm) to the length and width.
Border gauge: One sl st per edge stitch, worked loosely at 8 sts = 1 in (2.5 cm).
Rnd 2 (edging): Continue with dark green. In this round, “side” means the 12 sts of Side A or Side B. The base and tip points are counted separately.
- Side B (running from tip to base): Working in BLO, sl st in each of the 12 Side B sts, going back toward the base. (12 sl st)
To do this, turn the leaf over and work the round in the opposite direction from Rnd 1. That way the front loops stay as a raised outline on the right side.
- Base: Sl st in the base ch-1. (1 sl st)
- Side A: Working in BLO, sl st in each of the 12 Side A sts. (12 sl st)
- Tip: In the tip ch-2 sp, work (sl st, ch 1, sl st). (2 sl st + 1 ch)
Round total: 27 sl st + 1 ch. That’s 12 per side, 1 at the base and 2 at the tip.
Fasten off and leave a 10 in (25.4 cm) tail at the base for sewing.
Why the math works: One sl st per stitch along each side adds no stitches, so the curve stays flat without ruffling or cupping. The single sl st at the base keeps it rounded. The ch-1 at the tip makes the point. Both sides get the same 12 stitches, so the leaf stays symmetrical along its vein.
Final Blocking
- Weave in all tails except the leaf sewing tails. Do this before assembly.
- Lightly mist the leaves with water, or steam them from 1 in (2.5 cm) above. Don’t touch the iron to the yarn.
- Pin each leaf to 1.75 in × 1 in (4.4 cm × 2.5 cm). Put one pin at the tip and one at the base so the vein stays straight.
- Roll each berry between your palms to even out its shape. Don’t wet the berries.
- Hang each stem with a light weight, such as a clothespin, for 10 minutes to straighten it.
- Let everything dry completely before assembly.
- After assembly, steam the bow loops lightly and shape them with your fingers.
Final Quality-Control Checklist
- 6 berries, each 0.75 in (1.9 cm) across, firmly stuffed, with the dimple facing down
- 4 leaves, each 1.75 in × 1 in (4.4 cm × 2.5 cm), with straight veins and pointed tips
- Stem lengths of 1.25, 1.75, 2.25 and 2.75 in (3.2, 4.4, 5.7 and 7.0 cm) in a 2-1-2-1 order
- Wrap tight, 0.25 in (0.6 cm) tall, fully hidden under the bow
- Loop stands 2 in (5.1 cm) above the bow
- Total height 6 in (15.2 cm), width 3.5 in (8.9 cm)
- No sewing visible from the front
- The ornament hangs straight without tipping forward
Troubleshooting
- Gaps show stuffing: Go down a hook size, or use the yarn-under method for sc.
- Berry looks like an egg: Check that Rnds 4–5 have exactly 18 sts each. An extra round makes the berry too tall.
- Leaf curls: The edging is too tight. Redo it with a larger hook, or work it more loosely.
- Leaf is lopsided: Count 12 sts on each side. A missing hdc is the usual cause.
- Cluster hangs crooked: Recenter Stem D in the bundle and rewrap.
- Bow flops: Make sure you used 2 strands. Steam the bow and pinch the loops into shape.
Care
Spot clean with cool water and mild soap, then reshape and let it dry flat. Store the ornament flat in tissue so the bow and leaves don’t get crushed.

Final Notes
Everything depends on the gauge of 8 sts and 9 rounds per inch (2.5 cm). That gauge gives a 0.75 in (1.9 cm) berry and a 1.5 in (3.8 cm) leaf, which grows to 1.75 in (4.4 cm) with the edging. It also gives stems in 0.5 in (1.3 cm) steps from 1.25 to 2.75 in (3.2 to 7.0 cm), so the finished cluster is 4 in (10.2 cm) tall and 6 in (15.2 cm) with the loop. Check each checkpoint before you move on, and the ornament will come together without any guesswork.
Happy crocheting!