The Winter Bow Heart is a small lace ornament built on an open chain frame. At its center, two chain loops cross to form a bow, a single chain stem runs down to the point, and a shallow chevron ties each side together. A round of double-crochet spokes and a scalloped shell edge turn that simple frame into a traditional lace heart.
The sample is worked in a warm Christmas red, and the design works just as well in light pink, cream, or lavender. Make one heart for a gift tag, or make a few in different colors for the tree. Each ornament is a separate single piece; no joining is needed.
This pattern uses US crochet terms. The finished heart measures 4.25 in (10.8 cm) wide by 4.25 in (10.8 cm) tall, plus a hanging loop of about 1.75 in (4.4 cm).
Construction is simple. You chain the frame (bow loops, stem, sides, and chevrons) in one continuous strand. Next you work Round 2 (spokes) and Round 3 (shells) around the outer edge of the frame. To finish, you add the hanging loop and block the heart flat.
Finished Size and Construction
- Finished size: 4.25 in x 4.25 in (10.8 cm x 10.8 cm), loop not included
- Hanging loop: about 1.75 in (4.4 cm) long
- Skill level: Easy to Intermediate (you will be counting chains carefully)
- Terminology: US crochet terms
- Yarn weight: Fingering (#1 super fine) cotton or size 3 crochet thread
- Hook: 2.5 mm (US B/1 or C/2, depending on brand)
- Number of pieces: 1
- Layout: Single motif, no assembly
- Chain frame size: 3 in x 3 in (7.6 cm x 7.6 cm)
- Size before shell edge (after Round 2): 3.75 in x 3.75 in (9.5 cm x 9.5 cm)
- Edging depth (Rounds 2–3): 0.625 in (1.6 cm) on each side
Materials
Use a smooth, mercerized cotton. It gives clear stitch definition and holds a crisp shape after blocking. Avoid fuzzy or very stretchy yarns, which blur the open spokes.
- Red (main sample): 6 g / 20 m for one heart
- Optional colorways: light pink, cream, or lavender, 6 g / 20 m per heart in each color
Tools:
- 2.5 mm crochet hook
- 2 locking stitch markers
- Tapestry needle
- Scissors
- Blocking mat or folded towel, rust-proof pins
- Spray bottle with water (optional: light spray starch)
The yarn amounts include a margin of about 20% for gauge swatching and tails.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- rep – repeat
Special stitch – Shell: 5 dc worked into the same ch-2 space.
Point shell: (3 dc, ch 2, 3 dc) worked into the same ch-2 space.
Gauge and Checkpoints
Chain gauge matters most for this design, because the frame sets every later count.
Chain gauge: 8 ch = 1 in (2.5 cm), measured lightly stretched.
Double crochet height: 1 dc is about 0.375 in (1.0 cm) tall.
Make one test heart before you make a set. Check these measurements as you go:
- Bow loop: One 36-ch loop measures 4.5 in (11.4 cm) around.
- Chain frame: Pin it flat into shape. It should measure 3 in x 3 in (7.6 cm x 7.6 cm).
- After Round 2: 3.75 in x 3.75 in (9.5 cm x 9.5 cm).
- After Round 3: 4.25 in x 4.25 in (10.8 cm x 10.8 cm).
If your frame is too big, go down to a 2.25 mm hook or chain more tightly. If it is too small, go up to a 2.75 mm hook. Do not change the chain counts. The edging math depends on them.

Part 1: The Chain Frame
Work the whole frame in one strand. Leave a 6 in (15.2 cm) starting tail.
Bow loops
Ch 1. This is the center node. Place a marker in it.
Ch 36, sl st in the center node. This makes the right loop.
Ch 36, sl st in the center node again. This makes the left loop.
Lay the work flat with both loops above the node. The node sits just below the top dip of the heart. On each loop, the first 20 chains counted from the node run up and over the top and down the outside. These are the arc chains. The remaining 16 chains curve back under the loop to the node and form the lower edge of the bow.
Stem and bottom ring
From the node, ch 20 straight down. This is the stem, 2.5 in (6.4 cm) long. Count 8 chains down the stem from the node and place the second marker in the 8th chain.
Ch 4, sl st in the 4th ch from hook. This makes the bottom ring at the tip of the heart.
Right side and right chevron
Ch 24, sl st in the 20th arc chain of the right loop. This is the right side of the heart, 3 in (7.6 cm) long.
Sl st in each of the next 12 ch of the side you just made, working back toward the tip. You are now at the 13th chain counted up from the bottom ring.
Ch 10, sl st in the marked stem chain. This makes the right chevron, 1.25 in (3.2 cm) long.
Sl st in each of the remaining 12 stem chains down to the bottom ring, then sl st in the ring.
Left side and left chevron
Ch 24, sl st in the 20th arc chain of the left loop.
Sl st in each of the next 12 ch back toward the tip.
Ch 10, sl st in the same marked stem chain.
Fasten off and weave in the ends. Remove the stem marker, but keep the node marker.
Frame checkpoint: Pin the frame into a heart: round the two loops, keep the stem straight, and set the chevrons into a shallow upside-down V. It should measure 3 in x 3 in (7.6 cm x 7.6 cm).
Part 2: Spoke Round (Round 2)
You only work into the outer edge of the frame: the 20 arc chains of each loop, the 24 chains of each side, and the bottom ring. The inner lines stay plain chain.
Round 2: Join yarn with sl st in the center node at the top dip. Ch 5 (counts as dc + ch 2).
- Right arc: (dc in next 2nd arc chain, ch 2) 10 times. You are working in arc chains 2, 4, 6, and so on up to 20. The last dc lands in the 20th arc chain, where the side is attached. (10 dc)
- Right side: Sk the top side chain. (dc in next 2nd chain, ch 2) 12 times. You are working in side chains 23, 21, 19, and so on down to 1, counted up from the ring. (12 dc)
- Bottom ring: (dc in ring, ch 2) twice. (2 dc)
- Left side: (dc in chain, ch 2) in side chains 1, 3, 5, and so on up to 23. (12 dc)
- Left arc: (dc in chain, ch 2) in arc chains 20, 18, 16, and so on down to 2. (10 dc)
Sl st in 3rd ch of beginning ch-5.
Round 2 count: 1 + 10 + 12 + 2 + 12 + 10 = 47 dc and 47 ch-2 spaces.
The single ch-2 space between the 2 dc in the bottom ring sits exactly at the tip. It is the 24th of the 47 spaces, with 23 spaces on each side of it.
Checkpoint: 3.75 in x 3.75 in (9.5 cm x 9.5 cm).
Part 3: Shell Edge (Round 3) and Hanging Loop
Think of Rounds 2 and 3 together as the border of this single piece.
Border gauge: Round 2 places 1 spoke on every 2 frame chains, so there are 4 spokes per inch (2.5 cm) of frame. Round 3 places one shell on every 2 spaces, so the shells sit at an even 1 per 0.5 in (1.3 cm) of frame.
Round 3: Sl st in first ch-2 sp (space 1). Ch 1, sc in same sp.
- Right half: Shell in next ch-2 sp, sc in next ch-2 sp; rep from * 10 more times. (11 shells, 11 sc — ends with sc in space 23)*
- Tip: Point shell in next ch-2 sp (space 24). (6 dc + ch-2)
- Left half: Sc in next ch-2 sp (space 25). *Shell in next ch-2 sp, sc in next ch-2 sp; rep from ** 10 more times. (1 + 11 sc, 11 shells — ends with sc in space 47)*
Sl st in first sc.
Round 3 count: 24 sc + (22 shells x 5 dc = 110 dc) + 6 dc in the point shell = 140 sts plus 1 ch-2 tip space.
Why the math works: Round 2 has an odd number of spaces (47), so one space sits exactly at the tip. Shells go in all even-numbered spaces (2 through 46), and sc go in all odd-numbered spaces (1 through 47). That gives 23 shells and 24 sc. Space 24 is even, so the point shell lands right at the tip. Spaces 1 and 47 are both odd, so two sc sit on either side of the top dip, which pulls it in neatly. Each half gets exactly 11 regular shells, so the heart is perfectly symmetrical.
Hanging loop: Do not fasten off. Ch 30, sl st in the same sc to form the loop. Work 36 sc around the ch-30 loop, then sl st in the first sc at its base. Fasten off, leaving a 6 in (15.2 cm) tail, and weave it into the top dip.
Final checkpoint: 4.25 in x 4.25 in (10.8 cm x 10.8 cm). The loop is about 1.75 in (4.4 cm) long.
Final Blocking
- Soak the heart in cool water for 5 minutes. Gently press out the water in a towel. Do not wring it.
- Draw a 4.25 in (10.8 cm) square on paper and put it under plastic wrap on your mat as a guide.
- Pin the bottom point first, then the top dip on the center line.
- Pin the left and right loops into even rounded curves. Check that both lobes are the same width.
- Pin each shell at its center dc so the scallops spread evenly.
- Straighten the stem. Push the chevrons into a shallow upside-down V and the inner bow curves into smooth arcs.
- Mist with light starch if you want a stiffer ornament.
- Let it dry completely before unpinning, usually 12–24 hours.
Final Quality-Control Checklist
- Round 2 has 47 dc and 47 ch-2 spaces.
- Round 3 has 23 shells (including 1 point shell) and 24 sc.
- The point shell is centered directly below the stem.
- The two sc meet at the top dip, and the loop is attached there.
- Each lobe has 11 shells from the dip down to the tip.
- The stem runs straight from the node to the tip.
- The chevrons mirror each other.
- The heart measures 4.25 in x 4.25 in (10.8 cm x 10.8 cm).
- All ends are woven in along chain lines where they won’t show.
Troubleshooting
The heart leans to one side. Most likely a side chain was attached to the wrong arc chain. Recount: it must be the 20th arc chain from the node on both loops.
The point shell is off-center. Count the Round 2 spaces on each side of the tip. There must be 23 on each side. Usually one side is missing a spoke.
The edge ruffles. Your shells are too loose compared with your frame. Use a smaller hook for Round 3, or work 4 dc shells on the lobe tops only.
The edge cups. Your frame chains are too tight. Remake the frame with looser chains, or use a larger hook for the frame only.
The chevron sags. Ch 9 instead of 10 for a tighter line, but make the same change on both sides.
The hanging loop twists. Work the sc over the loop evenly and block it straight.
Care
Hand wash in cool water with mild soap, press dry in a towel, and reshape flat to dry. Store the ornaments flat between tissue paper so the scallops keep their shape.

Final Notes
Every measurement depends on the one before it. The chain gauge of 8 ch = 1 in (2.5 cm) produces a 3 in (7.6 cm) frame. The spoke round brings it to 3.75 in (9.5 cm) with 47 spaces. The shell edge finishes it at 4.25 in (10.8 cm). If your first heart matches each checkpoint, the rest of your set will match too, in every color you choose.
Happy crocheting!