Winter Velvet Poinsettia Ornament Crochet Pattern

The Winter Velvet Poinsettia is a layered Christmas tree ornament built from small pointed petals and leaves. Two rings of deep burgundy petals sit on top of each other, three forest green leaves peek out from behind them, and a cluster of cream bobble berries fills the center. A burgundy crocheted cord forms the hanging loop, finished with a small bow.

Every petal and leaf is worked in one round around a foundation chain. The chain becomes a visible center vein, and the stitch heights rise from sc to tr and back down, giving each piece a wide middle and a pointed tip. A second round of sc outlines the edge and sharpens the tip with a ch-2 point.

This pattern uses US crochet terms. The finished ornament measures about 5 in (12.7 cm) wide and 5.25 in (13.3 cm) tall without the hanging loop, and about 7.75 in (19.7 cm) tall with it.

You make 5 large petals, 5 small petals, 3 leaves, a center disc, a bobble berry cluster, and two cords. Then you sew the large petals around the disc, add the leaves behind, sew the small petals on top, and finish with the berries, loop, and bow.

Finished Size and Construction

  • Finished size: 5 in (12.7 cm) wide x 5.25 in (13.3 cm) tall without loop; 7.75 in (19.7 cm) tall with loop
  • Skill level: Easy-intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK (light, #3)
  • Hook: 3.5 mm (US E-4)
  • Number of pieces: 18 (5 large petals, 5 small petals, 3 leaves, 1 center disc, 1 berry ring, 1 center berry, 1 hanging cord, 1 bow cord), sewn into one ornament
  • Layout: large petals in a 5-point star, small petals on top rotated halfway between them, leaves behind at 12, 4, and 8 o’clock, berries in the center
  • Large petal / leaf size: 2.25 in (5.7 cm) long x 1.25 in (3.2 cm) wide
  • Small petal size: 1.75 in (4.4 cm) long x 1 in (2.5 cm) wide
  • Size before border (Round 1 only): large petal 2 in (5.1 cm) x 1 in (2.5 cm); small petal 1.5 in (3.8 cm) x 0.75 in (1.9 cm)
  • Border depth: 0.125 in (0.3 cm) on each edge

Materials

Choose a smooth DK yarn with good stitch definition. Cotton or a cotton-acrylic blend shows the vein and stitch texture best. The quantities below assume about 120 m per 50 g (2.4 m per gram).

  • Burgundy: 15 g (36 m) for petals, disc, hanging cord, and bow
  • Forest green: 5 g (12 m) for leaves
  • Cream: 3 g (7 m) for berries

Quantities include a margin of roughly 30 percent for a test petal and sewing tails.

Tools:

  • 3.5 mm (US E-4) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch marker
  • Pins and a foam blocking mat
  • Spray bottle of water
  • Ruler or tape measure

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • sp – space
  • st(s) – stitch(es)
  • MR – magic ring
  • BB – bobble

Special stitch – Bobble (BB): (Yarn over, insert hook in indicated st, yarn over and pull up a loop, yarn over and pull through 2 loops) 5 times in the same st, yarn over and pull through all 6 loops on hook.

Working around a chain: Side A is worked into the top loops of the chain. Side B is worked into the remaining loops on the other side of the same chain, so the chain sits in the middle as a vein.

Gauge and Checkpoints

Base gauge: 22 sc x 24 rows = 4 in (10.2 cm) with a 3.5 mm hook. Your foundation chain should measure about 6 ch per 1 in (2.5 cm).

The best test is to make one large petal first and measure it at each stage:

  • Foundation chain of 12: about 2 in (5.1 cm)
  • After Round 1: 2 in (5.1 cm) long x 1 in (2.5 cm) wide
  • After Round 2: 2.25 in (5.7 cm) long x 1.25 in (3.2 cm) wide

If the petal is more than 0.25 in (0.6 cm) too long, change to a 3.25 mm hook. If it is more than 0.25 in (0.6 cm) too short, change to a 3.75 mm hook. If the length is right but the petal looks wide and floppy, your tr stitches are loose; snug each loop before finishing the stitch.

A burgundy crocheted flower with cream bobbles at its center displayed on wood among other crochet pieces.

Large Petals (Make 5, Burgundy)

Foundation: Ch 12. The 1st ch from the hook is the tip and is skipped. Chains 2 through 11 carry the side stitches, and ch 12 is the base.

Round 1 (petal body):

  • Side A: sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, tr in next 3 ch, dc in next 2 ch, hdc in next ch (10 sts).
  • Base: 3 sc in last ch (3 sts).
  • Side B: working along the opposite side of the chain, hdc in next ch, dc in next 2 ch, tr in next 3 ch, dc in next 2 ch, hdc in next ch, sc in next ch (10 sts).
  • Tip: ch 2, sl st in first sc of the round.

Round 1 total: 23 sts plus 1 ch-2 tip sp. The tr stitches sit in the middle, so the petal is widest at its center and tapers at both ends.

Continue directly with Round 2 from the Border section before fastening off.

Small Petals (Make 5, Burgundy)

Foundation: Ch 10. Chains 2 through 9 carry the side stitches, and ch 10 is the base.

Round 1 (petal body):

  • Side A: sc in 2nd ch from hook, hdc in next ch, dc in next 4 ch, hdc in next ch, sc in next ch (8 sts).
  • Base: 3 sc in last ch (3 sts).
  • Side B: along the opposite side of the chain, sc in next ch, hdc in next ch, dc in next 4 ch, hdc in next ch, sc in next ch (8 sts).
  • Tip: ch 2, sl st in first sc of the round.

Round 1 total: 19 sts plus 1 ch-2 tip sp. Using dc instead of tr keeps these petals narrower, so the large layer shows around them.

Continue with Round 2 from the Border section.

Leaves (Make 3, Forest Green)

Work exactly as the Large Petal, Rounds 1 and 2, in green. Each leaf has 23 sts plus a ch-2 tip in Round 1 and finishes at 2.25 in (5.7 cm) x 1.25 in (3.2 cm).

Center Disc (Make 1, Burgundy)

Round 1: MR, ch 1, 10 sc in ring, sl st to first sc (10 sts). Pull the ring closed. Fasten off with a 10 in (25.4 cm) tail.

Checkpoint: about 0.6 in (1.5 cm) across.

Berry Cluster (Cream)

Berry ring:

  • Round 1: MR, ch 1, 6 sc in ring, sl st to first sc (6 sts).
  • Round 2: Ch 1, (BB in next st, ch 1) 6 times, sl st to top of first BB (6 BB, 6 ch-1 sps).

Fasten off with an 8 in (20.3 cm) tail. The bobbles pop toward the back of the work, so use that side as the right side.

Center berry: MR, ch 2, BB in ring, ch 1, pull ring tight. Fasten off with an 8 in (20.3 cm) tail. Sew it into the center of the berry ring for 7 berries in total.

Checkpoint: finished cluster about 1 in (2.5 cm) across.

Hanging Cord and Bow (Burgundy)

Hanging cord: Ch 41, sl st in back bump of 2nd ch from hook and of each ch across (40 sl sts). Fasten off with a 6 in (15.2 cm) tail. Length: about 6.75 in (17.1 cm).

Bow cord: Ch 51, sl st in back bump of 2nd ch from hook and of each ch across (50 sl sts). Fasten off. Length: about 8.25 in (21.0 cm).

Make All Pieces

Before assembly, check that you have:

  • Burgundy: 5 large petals, 5 small petals, 1 center disc, 1 hanging cord, 1 bow cord (13 pieces)
  • Forest green: 3 leaves (3 pieces)
  • Cream: 1 berry ring, 1 center berry (2 pieces)

Layering layout, back to front, with positions as clock hours:

Layer 1 (back):  Leaves at 12:00, 4:00, 8:00
Layer 2:         Center disc + large petals at 12:00, 2:24, 4:48, 7:12, 9:36
Layer 3:         Small petals at 1:12, 3:36, 6:00, 8:24, 10:48
Layer 4 (front): Berry cluster in center
Top:             Hanging loop + bow above the 12:00 leaf

Joining

Method: Whipstitch with the matching tail, working through both loops.

Large petals to disc: Each large petal base has 3 sc across its Round 2 edge. The disc has 10 sc. Sew each petal base over 2 consecutive disc sts, centering the middle base sc over the gap between them. 5 petals x 2 sts = 10 sts, so the petals meet edge to edge around the disc with no gaps. Place the first petal pointing straight up.

Leaves: Turn the star face down. Place one leaf behind the top petal, its base on the disc and its tip about 0.75 in (1.9 cm) above the top petal tip. Place the other two leaves between the side and lower petals, pointing toward 4:00 and 8:00. Tack each leaf base to the disc and each leaf midpoint to the petal in front of it.

Small petals: Turn the work face up. Sew each small petal base to the front of the disc, centered between two large petals and covering 2 disc sts, again 10 sts total. Tack each midpoint so it lies flat.

Berries: Sew the cluster over the center, stitching through the ch-1 sps into the disc.

Loop and bow: Fold the hanging cord in half. Sew both ends to the back of the top leaf about 0.5 in (1.3 cm) below its tip, so the loop stands about 2.5 in (6.4 cm) above the ornament. Tie the bow cord into a bow about 2.5 in (6.4 cm) wide around the loop base and tack the knot to the leaf.

Tension: Keep whipstitches snug but not tight. Pulling hard bunches the petal bases and makes the star cup forward.

Size checkpoint: 5 in (12.7 cm) wide across the side petals and leaves, and 5.25 in (13.3 cm) from the top leaf tip to the lowest petal tip.

Border

The border is Round 2 of every petal and leaf: one round of sc that outlines the shape and adds 0.125 in (0.3 cm) to each edge.

Border gauge: 6 sc = 1 in (2.5 cm) along the edge.

Large petals and leaves, Round 2: Ch 1, sc in same st as join and in each of next 9 sts (10 sc, Side A), sc in each of next 3 base sts (3 sc), sc in each of next 10 sts (10 sc, Side B), (sc, ch 2, sc) in ch-2 tip sp, sl st to first sc. Fasten off with a 10 in (25.4 cm) tail.

Count: 10 + 3 + 10 + 2 = 25 sc plus 1 ch-2 tip.

Small petals, Round 2: Ch 1, sc in same st as join and in each of next 7 sts (8 sc, Side A), sc in each of next 3 base sts (3 sc), sc in each of next 8 sts (8 sc, Side B), (sc, ch 2, sc) in ch-2 tip sp, sl st to first sc. Fasten off with a 10 in (25.4 cm) tail.

Count: 8 + 3 + 8 + 2 = 21 sc plus 1 ch-2 tip.

Why the math works: Each side gets exactly one sc per Round 1 st, so the edge lies flat without ruffling or cupping. The base stays at 3 sts, narrow enough to fit over 2 disc sts. The only additions are 2 sc and a ch-2 at the tip, which push the point out and keep it sharp. The large petal grows from 2 in (5.1 cm) to 2.25 in (5.7 cm) long, and from 1 in (2.5 cm) to 1.25 in (3.2 cm) wide, 0.125 in (0.3 cm) per side.

Final Blocking

  1. Weave in all remaining tails on the back.
  2. Lightly mist the ornament until damp, not soaked.
  3. Place it face up on the blocking mat.
  4. Pin each petal and leaf tip outward, pulling gently to sharpen the points.
  5. Check the size: 5 in (12.7 cm) wide and 5.25 in (13.3 cm) tall.
  6. Lay the loop straight up and shape the bow loops evenly.
  7. Leave to dry completely, about 6 to 8 hours.
  8. Unpin and hang it to check that it sits straight.

Final Quality-Control Checklist

  • 5 large petals, each 25 sc in Round 2 plus a ch-2 tip
  • 5 small petals, each 21 sc in Round 2 plus a ch-2 tip
  • 3 leaves matching the large petal size
  • Center vein visible on every petal and leaf
  • Large petals evenly spaced, one pointing straight up
  • Small petals centered between the large petals
  • Green tips visible at 12:00, 4:00, and 8:00
  • 7 cream berries, all popped to the front
  • Loop and bow firmly attached
  • All tails woven in
  • Finished size 5 in (12.7 cm) x 5.25 in (13.3 cm)

Troubleshooting

Petals curl lengthwise. The foundation chain is too tight. Chain with a hook one size larger, then switch back.

Tips are rounded. Work (sc, ch 2, sc) into the tip sp, not the sl st, and pin tips firmly when blocking.

Petal edge ruffles. You worked extra sts along a side. Recount: 10 sc per side on large petals, 8 on small.

Bobbles sink in. Turn the berry ring over; the bobbles pop on the back.

Star cups forward. Whipstitches at the disc are too tight. Loosen them and re-block flat.

Ornament hangs crooked. Move the loop ends onto the center line of the top leaf.

Care

Spot clean with cool water and mild soap, then reshape and dry flat. Store flat or hanging, away from heavy items that could crush the berries.

Hand holding a burgundy crocheted poinsettia ornament with cream center and green leaves on a lit Christmas tree.

Final Notes

The measurement chain is short. A 12-ch foundation gives a 2 in (5.1 cm) large petal, and the edging brings it to 2.25 in (5.7 cm) x 1.25 in (3.2 cm). Five petals over a 0.6 in (1.5 cm) disc, 2 disc sts each, form the star. Small petals add the second layer, leaves extend the outline, and the finished ornament measures 5 in (12.7 cm) x 5.25 in (13.3 cm), or 7.75 in (19.7 cm) tall with its loop. Check each stage and the rest falls into place.

Happy crocheting!

Leave a Comment