This crochet plastic bag holder hangs on a hook and keeps grocery bags tidy. You push bags in through the top and pull them out one at a time from the cinched bottom. The body is a column of stacked chevrons. Solid zigzag stripes of double crochet alternate with airy mesh stripes, so the bags inside show through like a lattice.
The sample is shown in two colorways, deep violet purple and soft mint green. Each holder uses one color only. The style is clean and modern, so it suits a kitchen wall, a pantry door, or the inside of a cupboard. Making one in each color is a nice way to sort bags, for example grocery bags in one and small produce bags in the other.
The pattern uses US crochet terms. The finished holder is about 15 in (38.1 cm) around, which is about 4.75 in (12.1 cm) across when round. It is about 18 in (45.7 cm) tall, not counting the hanging strap.
You work it bottom-up in joined rounds. The order is a single crochet band with an eyelet round, then 26 chevron rounds, then one levelling round, then a single crochet top band. The strap is worked straight off the last round. Last, a slip-stitch drawstring is threaded through the eyelets.
Finished Size and Construction
- Finished size: 15 in (38.1 cm) around × 18 in (45.7 cm) tall
- Skill level: Easy-Intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (#4), cotton or cotton blend
- Hook: 5.0 mm (US H-8)
- Number of pieces: 1 tube (with the strap attached) + 1 drawstring cord
- Layout: One cylinder, worked bottom-up in joined rounds
- Piece size: 60 stitches in every round
- Size before border (after Rnd 37): 16 in (40.6 cm) tall
- Border (top band) depth: 2 in (5.1 cm)
Materials
Yarn: Use a smooth worsted-weight cotton or cotton blend of about 180 m per 100 g. Cotton holds the chevron shape, does not stretch much under the weight of the bags, and washes well. Avoid 100% acrylic, because the strap can sag over time. A yarn with clear stitch definition also makes the zigzags look crisper.
- Main color (one holder): Violet Purple, 120 g (about 220 m)
- Alternate colorway: Mint Green, 120 g (about 220 m), if you make the second holder
These amounts include a margin of about 20% for gauge differences and the test swatch.
Tools:
- 5.0 mm (US H-8) crochet hook
- 2 stitch markers
- Tapestry needle
- Scissors
- Tape measure
- A rolled towel or a tall cardboard tube for blocking
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- tr: treble crochet
- sk: skip
- sp(s): space(s)
- st(s): stitch(es)
- Rnd: round
Special stitch: dc3tog (double crochet 3 together). [Yarn over, insert hook in next st, yarn over and pull up a loop, yarn over and pull through 2 loops] 3 times, working into 3 sts in a row. You now have 4 loops on the hook. Yarn over and pull through all 4. This turns 3 sts into 1 and forms each valley.
Counting note: The beginning ch-3 counts as a dc. In mesh rounds and the eyelet round, the beginning ch-4 counts as a dc plus ch 1. Every ch-1 sp counts as 1 st, and you work into it as if it were a stitch.
Gauge and Checkpoints
- Sc gauge: 16 sc × 18 rnds = 4 in (10.2 cm)
- Dc gauge: 16 dc × 8 rnds = 4 in (10.2 cm)
- Chevron repeat: 12 sts = 3 in (7.6 cm) wide. 4 rnds = 2 in (5.1 cm) tall.
Make a test piece first. Work Rnds 1–10 and measure before you go on. Wrap the tape measure around the outside of the band without stretching it. It should measure 15 in (38.1 cm) around and 2.5 in (6.4 cm) tall. This band becomes part of your holder, so you lose no work.
Checkpoints:
- After Rnd 10: 2.5 in (6.4 cm) tall
- After Rnd 18: 6.5 in (16.5 cm) tall
- After Rnd 26: 10.5 in (26.7 cm) tall
- After Rnd 36: 15.5 in (39.4 cm) tall
- After Rnd 37: 16 in (40.6 cm) tall
- After Rnd 46: 18 in (45.7 cm) tall
Measure height with the tube lying flat and the chevrons relaxed. Measure from the bottom edge to the lowest valley of the latest round, not the peaks.
Too big? Go down 0.5 mm in hook size and redo the test band. Too small? Go up 0.5 mm. If only the height is off, adjust how tightly you pull the yarn-overs and keep the same hook. Never change the stitch count, because the chevron repeat needs a multiple of 12.

Pattern
Bottom Band
Foundation: Ch 60. Without twisting, join with a sl st to the first ch to form a ring.
Rnd 1: Ch 1, sc in each ch around, join with a sl st to the first sc. (60 sc)
Rnd 2 (eyelet round): Ch 4 (counts as dc + ch 1), sk next st, dc in next st, ch 1, sk next st. Repeat from * around and join with a sl st to the 3rd ch of the beginning ch-4. (30 dc + 30 ch-1 sps = 60 sts)
Rnd 3: Ch 1, sc in each dc and each ch-1 sp around, join. (60 sc)
Rnds 4–10: Ch 1, sc in each st around, join. (60 sc)
Checkpoint: 2.5 in (6.4 cm) tall. That is 9 sc rounds at 2 in (5.1 cm) plus the eyelet round at 0.5 in (1.3 cm).
Chevron Body
Every chevron round starts with a sl st into the next st. This moves the start onto the center of a peak, so the peaks and valleys stack in straight vertical lines. Every chevron round keeps exactly 60 sts, which is 5 repeats of 12. Place a marker in the center st of the first peak so you can see the alignment as you go.
Solid round (S): Sl st in next st, ch 3, 2 dc in same st (first peak). Dc in next 4 sts, dc3tog over next 3 sts, dc in next 4 sts, 3 dc in next st. Repeat from * 3 more times. Dc in next 4 sts, dc3tog over next 3 sts, dc in next 4 sts. The last dc goes into the st you slipped past at the start. Join with a sl st to the top of the beginning ch-3. (60 sts: 3 + 4 × 12 + 9)
Mesh round (M): Sl st in next st or ch-1 sp, ch 4, dc in same st or sp (first peak). Ch 1, sk next st, dc in next st, ch 1, sk next st, dc in next st, dc3tog over next 3 sts, dc in next st, ch 1, sk next st, dc in next st, ch 1, sk next st, (dc, ch 1, dc) in next st or sp. Repeat from * 3 more times. Ch 1, sk next st, dc in next st, ch 1, sk next st, dc in next st, dc3tog over next 3 sts, dc in next st, ch 1, sk next st, dc in next st, ch 1, sk next st. Join with a sl st to the 3rd ch of the beginning ch-4. (60 sts: 35 dc-type sts + 25 ch-1 sps. Each repeat has 7 sts and 5 sps.)
In the second mesh round, each dc lands in a ch-1 sp and each skipped st is a dc. This stacks the openings into small ladders. When a solid round follows a mesh round, the peak goes into the center ch-1 sp, and you work 1 dc into every st and every ch-1 sp.
Rnds 11–12: S. (60 sts each)
Rnds 13–14: M. (60 sts each)
Rnds 15–36: Repeat (2 rounds S, 2 rounds M) 5 more times, then work 2 rounds S. Rnds 35–36 are the 7th solid band.
Checkpoint: 7 solid bands and 6 mesh bands. The body is 13 in (33.0 cm) tall and the piece is 15.5 in (39.4 cm) in total.
Levelling Round
This is a conversion round. It straightens the zigzag top with short stitches on the peaks and tall stitches in the valleys.
Rnd 37: Sl st in next st (center of peak), ch 1, sc in same st and in next st. Hdc in next 2 sts, dc in next 2 sts, tr in next st (valley), dc in next 2 sts, hdc in next 2 sts, sc in next 3 sts. Repeat from * 3 more times. Hdc in next 2 sts, dc in next 2 sts, tr in next st, dc in next 2 sts, hdc in next 2 sts, sc in next st. Join to the first sc. (60 sts: 60 worked 1 per existing st + 0 added)
Checkpoint: 16 in (40.6 cm) tall, with a level top edge.
Border: Top Band and Hanging Strap
Border gauge: 16 sc × 18 rnds = 4 in (10.2 cm), the same as the bottom band.
Rnds 38–46: Ch 1, sc in each st around, join. (60 sc each round. With the tube flattened, that is 30 sc on the front and 30 sc on the back.)
Checkpoint: The top band is 2 in (5.1 cm) deep and the holder is 18 in (45.7 cm) tall.
Strap: Do not fasten off after Rnd 46. Ch 40. Without twisting, sl st in the 31st sc of Rnd 46, which is directly opposite the join. This leaves 29 free sc between the two attachment points on each side.
- Strap Row 1: Turn, sc in each ch across (40 sc), sl st in the first sc of Rnd 46.
- Strap Row 2: Turn, sl st in each sc across (40 sl st), sl st in the 31st sc of Rnd 46.
Fasten off. The strap is about 10 in (25.4 cm) long. It rises about 3 in (7.6 cm) above the rim to form the triangular hanging loop.
Why the math works: Every round from Rnd 1 to Rnd 46 has exactly 60 sts. That divides evenly into 5 chevron repeats of 12, so no round has a partial repeat. The levelling round turns 60 sts into 60 sts, so the top band starts on the same count as the bottom band. The two attachment points split the rim into equal halves of 30 sts, so the strap hangs centered and the holder hangs straight.
Drawstring
Ch 121. Sl st in the back bump of the 2nd ch from the hook and in each ch across. (120 sl st, about 26 in / 66.0 cm)
Starting at the front, weave the cord in and out through all 30 ch-1 sps of Rnd 2 so that both ends come out of neighboring sps. Tie an overhand knot 1 in (2.5 cm) from each end, then tie a second knot on top of it to make the beaded tip. Trim close to the knot and sew the tail into it. Each tail should hang about 5 in (12.7 cm) when the bottom is cinched.
Final Blocking
- Weave in all ends on the inside of the tube, following the solid stitches.
- Soak the holder in cool water for 10 minutes. Gently press the water out without wringing.
- Roll it in a towel to remove extra moisture.
- Slide it over a rolled towel or a tube about 4.75 in (12.1 cm) across.
- Line up the peaks and valleys vertically and nudge each mesh opening into an even rectangle.
- Check the size: 15 in (38.1 cm) around and 18 in (45.7 cm) tall.
- Let it dry completely, then thread the drawstring if you took it out.
Final Quality-Control Checklist
- Every round counts 60 sts
- Peaks sit directly above peaks for the whole body
- There are 7 solid bands and 6 mesh bands
- The top edge is level after Rnd 37
- The strap is centered, not twisted, and firmly anchored at both ends
- The drawstring passes through all 30 eyelets and the knots do not slip
- Final size is 15 in (38.1 cm) × 18 in (45.7 cm)
Troubleshooting
- The chevrons drift sideways: You missed the sl st at the start of a round. Rip back to that round and add it.
- The count is off by 1 or 2: Check the last repeat. The final dc goes into the st you slipped past.
- The mesh flares: Tighten your ch-1s so each one is no wider than a dc.
- The top edge ripples: Make sure each tr in Rnd 37 sits exactly in a valley.
- The strap stretches: Add a 3rd row of sl st, or work the strap with a 4.5 mm hook.
- Bags slip out too easily: Pull the drawstring tighter and tie a bow before the knots.
- The tube twists: Join every round in the same place and do not turn between rounds.
Care
Machine wash cold on a gentle cycle, or hand wash. Reshape while damp and lay flat or hang to dry.

Final Notes
The measurements build in a short chain. The test band is 15 in (38.1 cm) around and 2.5 in (6.4 cm) tall. The chevron body adds 13 in (33.0 cm), the levelling round brings the piece to 16 in (40.6 cm), and the top band finishes it at 18 in (45.7 cm). Every round holds 60 stitches. If you keep that count and check the height at each checkpoint, your holder will match the one shown.
Happy crocheting!