This little tree is made of soft fan shells, stacked one tier at a time into a neat triangle. A sturdy brown trunk sits below, and a simple chain loop at the top lets it hang on a branch, a gift, or a door knob.
The palette is warm and rustic: a golden caramel for the tree and loop, and a medium brown for the trunk. Worsted-weight cotton gives clear stitch definition, so every fan reads cleanly against the lights.
The pattern uses US crochet terms. The finished ornament is 4.75 in (12.1 cm) wide and 3.45 in (8.8 cm) tall, not counting the loop. The loop adds about 2 in (5.1 cm).
You work one single piece. First comes a base row of single crochet. Then three tiers of shells go on top, with chain bridges between the tiers that create small diamond windows. Last, you work the trunk down from the free loops of the starting chain and finish with the hanging loop. There’s nothing to sew except two yarn tails.
Finished Size and Construction
- Finished size: 4.75 in (12.1 cm) wide x 3.45 in (8.8 cm) tall, plus a 2 in (5.1 cm) loop
- Skill level: Easy
- Terminology: US crochet terms
- Yarn weight: Worsted (#4), cotton or cotton blend
- Hook: 4.5 mm (US 7)
- Number of pieces: 1
- Layout: Single triangular tree, three shells / two shells / one shell, trunk centered below
- Piece size: 4.75 in (12.1 cm) wide at the base row
- Size before border: Same as finished, 4.75 in x 3.45 in (12.1 cm x 8.8 cm)
- Border depth: None added. The shell scallops are the finished edge (0 in / 0 cm).
Materials
Yarn: Choose a smooth worsted cotton, either mercerized or matte. Cotton holds the fan shape and blocks crisply. Acrylic also works, but the shells will look a little softer and rounder.
- Color A, caramel / golden ochre (tree and loop): 10 g, about 20 m (22 yd)
- Color B, medium brown (trunk): 3 g, about 6 m (7 yd)
These quantities include a margin of roughly 25 percent for your gauge swatch and tails.
Tools:
- 4.5 mm (US 7) crochet hook
- Tapestry needle
- Scissors
- 2 stitch markers
- Ruler or tape measure
- Pins and a blocking mat or folded towel
- Spray bottle with water
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- st(s) – stitch(es)
- sp – space
- sk – skip
Special stitch: Shell – Work 7 dc into the same stitch or space. Every shell in this pattern is a 7-dc shell. The 4th dc is the center dc, and it’s the anchor for the next tier.
Gauge and Checkpoints
Gauge: 16 sc x 18 rows = 4 in (10.2 cm) with a 4.5 mm hook.
One shell worked over 6 base stitches measures about 1.5 in (3.8 cm) across the top and 0.6 in (1.5 cm) tall.
Make a test of the base row and the first tier before you go further. That’s the whole bottom of the tree, and it tells you everything you need.
Checkpoints:
- Base row (19 sc): 4.75 in (12.1 cm) long, 0.25 in (0.6 cm) tall.
- After Row 1: total height 0.85 in (2.2 cm). Width still 4.75 in (12.1 cm).
- After Row 3: total height 1.7 in (4.3 cm).
- After Row 5: total height 2.55 in (6.5 cm).
- Trunk: 1.25 in (3.2 cm) wide x 0.9 in (2.3 cm) tall.
- Whole tree: 3.45 in (8.8 cm) tall without the loop.
If your base row is too long (over 5 in / 12.7 cm), go down to a 4 mm (US G-6) hook. If it’s too short (under 4.5 in / 11.4 cm), go up to a 5 mm (US H-8) hook. Shell height follows the hook, so fix the base row first and the tiers will fall into place.

Pattern
Base Row (Color A)
Ch 20.
Base Row: Sc in 2nd ch from hook and in each ch across. (19 sc)
Place a marker in the free loop of the 8th and 12th foundation chains, counted from the start of the chain. These mark the trunk position for later.
The count of 19 is chosen on purpose: 3 shells x 6 sts + 1 = 19. Each shell takes 6 base stitches, and the final sc closes the last shell.
Tier 1 – Three Shells
Row 1: Ch 1, turn. Sc in first sc, sk 2 sc, shell (7 dc) in next sc, sk 2 sc, sc in next sc. Repeat from * 2 more times. (3 shells; 4 sc + 21 dc = 25 sts)
The last sc lands in the 19th stitch. The four sc sit at stitches 1, 7, 13, and 19, and the shells sit in stitches 4, 10, and 16.
Checkpoint: Width 4.75 in (12.1 cm), height 0.85 in (2.2 cm).
Chain Bridge 1
Row 2: Turn. Sl st in each of the first 4 dc of the first shell, so your last sl st is in the center dc. Ch 1 (does not count as a st), sc in same center dc, ch 3, sc in center dc of next shell, ch 3, sc in center dc of last shell. (3 sc + 2 ch-3 sps)
Each ch-3 bridge spans the tops of two neighboring shells. Below each bridge you’ll see a small diamond opening, the same windows you see in the finished tree.
Tier 2 – Two Shells
Row 3: Ch 1, turn. Sc in first sc, shell in next ch-3 sp, sc in next sc, shell in next ch-3 sp, sc in last sc. (2 shells; 3 sc + 14 dc = 17 sts)
Work the shells into the space, not into the chains. That keeps each fan centered over the diamond window below.
Checkpoint: Total height 1.7 in (4.3 cm). The tier is about 3.25 in (8.3 cm) wide, because it sits inward from the outer halves of the end shells.
Chain Bridge 2
Row 4: Turn. Sl st in each of the first 4 dc of the first shell, ending in the center dc. Ch 1, sc in same center dc, ch 3, sc in center dc of next shell. (2 sc + 1 ch-3 sp)
Tier 3 – Top Shell
Row 5: Ch 1, turn. Sc in first sc, shell in ch-3 sp, sc in last sc. (1 shell; 2 sc + 7 dc = 9 sts)
Checkpoint: Total height 2.55 in (6.5 cm). The top shell is about 1.75 in (4.4 cm) wide.
Hanging Loop
Row 6: Turn. Sl st in each of the first 4 dc of the shell, ending in the center dc. Ch 25, sl st in the same center dc. Fasten off, leaving a 6 in (15.2 cm) tail.
The 25-ch loop is about 4.25 in (10.8 cm) of chain, which folds to a loop about 2 in (5.1 cm) tall. Pulling up from the center dc gives the top shell its slight point.
Trunk (Color B)
Turn the tree upside down so the foundation chain faces up.
Row 1: Join Color B with a sl st in the marked 8th free loop. Ch 1, sc in the same loop and in the next 4 free loops, ending at the 12th marked loop. Remove markers. (5 sc)
Loops 8 to 12 are centered exactly: there are 7 free loops on each side (1–7 and 13–19).
Rows 2–4: Ch 1, turn. Sc in each sc across. (5 sc)
Fasten off, leaving a 6 in (15.2 cm) tail.
Checkpoint: The trunk is 1.25 in (3.2 cm) wide (5 sts at 4 sts per inch) and 0.9 in (2.3 cm) tall (4 rows at 4.5 rows per inch). Total height: 2.55 in + 0.9 in = 3.45 in (8.8 cm).
Border
This ornament has no added border, and that’s deliberate. The outer arcs of the shells are the finished edge, and they make the rounded scalloped silhouette you see in the photo. A round of single crochet would flatten those scallops and turn the soft tree into a stiff triangle.
Border gauge: Not applicable. The edge is set by the shell gauge, 1.5 in (3.8 cm) per shell.
Per-side edge count (for reference):
- Bottom edge: 19 foundation stitches, with the trunk’s 5 sc worked into loops 8–12.
- Each slanted side: 3 shell outer halves, one per tier (3 dc + 1 sc showing per tier).
Why the math works: Each tier has one fewer shell than the tier below. Row 1 makes 3 shells and 3 center dc. The bridge row uses all 3 center dc as anchors, which creates 2 spaces. Two spaces give 2 shells, then 2 center dc give 1 space, and 1 space gives the 1 top shell. Every tier loses exactly half a shell on each side, so both slanted sides come out straight and even.
If you’d like a crisper outline anyway, work 1 sl st in each stitch around the outer edge in Color A. Use the same tension as your chains and don’t add any stitches. The size stays at 4.75 in x 3.45 in (12.1 cm x 8.8 cm).
Final Blocking
- Weave in all tails along the backs of the shells (Color A) and inside the trunk rows (Color B). Trim close.
- Pin the ornament face up on a blocking mat or folded towel.
- Pin the bottom edge straight to 4.75 in (12.1 cm).
- Pin the top center dc so the full height is 3.45 in (8.8 cm), not counting the loop.
- Pin the outer edge of each shell into a smooth arc, and open each diamond window gently with a pin tip.
- Square the trunk to 1.25 in x 0.9 in (3.2 cm x 2.3 cm).
- Mist evenly with water until damp, not soaked.
- Let it dry completely, at least 4 hours. For a stiffer ornament, mist with a light fabric stiffener or starch spray before drying.
- Unpin and let the loop hang straight.
Final Quality-Control Checklist
- The base row has exactly 19 sc.
- The tiers have 3, 2, and 1 shells, and every shell has 7 dc.
- Each bridge row starts in a center dc, the 4th dc of its shell.
- Two diamond windows show between Tier 1 and Tier 2, and one shows between Tier 2 and Tier 3.
- Both slanted sides are straight and mirror each other.
- The trunk is 5 sc wide and 4 rows tall, with 7 free loops showing on each side.
- Width is 4.75 in (12.1 cm) and height is 3.45 in (8.8 cm).
- The loop is attached at the center top and measures about 2 in (5.1 cm).
- All tails are woven in and nothing pokes through on the front.
Troubleshooting
Shells cup or ruffle. Your dc are too loose for 7 sts. Go down half a hook size, or keep the yarn-overs snug as you work into the same stitch.
Shells pull tight and look like wedges. You may have skipped 3 sts instead of 2. Recount the base: shells go into stitches 4, 10, and 16.
Tree leans to one side. One bridge row probably started in the 3rd or 5th dc instead of the 4th. Rip back to that bridge and recount the slip stitches.
Diamond windows close up. Your ch-3 bridges are too tight. Loosen your chains, or make them ch 4 and keep the shell count the same.
Trunk is off-center. Count the free loops again. There must be 7 on each side of the trunk.
Loop twists. Make sure the chain isn’t twisted before you slip stitch it closed, then block it hanging.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and dry flat, reshaping the shells. Store it flat or hanging so the loop doesn’t kink.

Final Notes
The whole ornament comes from one measurement chain. A 19-sc base row at 16 sc per 4 in gives 4.75 in (12.1 cm) of width. The base row and Tier 1 together are 0.85 in tall, and Tiers 2 and 3 add 0.85 in each, bringing the tree to 2.55 in (6.5 cm). A 4-row trunk adds 0.9 in (2.3 cm), for 3.45 in (8.8 cm) in total. The 25-ch loop hangs about 2 in (5.1 cm) above the top.
Match the base row first, check the shell height after Row 1, and the rest of the tree will follow. Make one in caramel, then try it in deep green, cream, or soft red for a whole branch of them.
Happy crocheting!