Peach Shell Fan Christmas Tree Ornament Crochet Pattern

This little tree ornament is made from six fan-shaped shells stacked in three tiers: three across the bottom, two in the middle and one at the top. Small diamond-shaped openings sit between the tiers, so the tree looks light and lacy. A short brown single crochet trunk and a simple chain hanging loop finish it.

The sample is worked in a soft peach (salmon pink) cotton, with a warm brown for the trunk. The colors give it a gentle, vintage feel that suits pastel trees, gift tags and wreaths. A blush, ivory or classic green would work just as well.

All instructions use US crochet terms. The finished ornament measures 4.25 in (10.8 cm) wide across the bottom tier and 3⅝ in (9.2 cm) tall from the top of the tree to the bottom of the trunk. The hanging loop adds about 2 in (5.1 cm), for a total length of 5⅝ in (14.3 cm).

Construction is simple. You crochet the tree body flat in rows from the bottom up, starting from one foundation chain. Each tier is a row of chain loops followed by a row of shells. One row of single crochet then outlines the outer edge and makes the hanging loop at the top. Last, you work the trunk straight down from the foundation chain in brown, so there is nothing to sew.

Finished Size and Construction

  • Finished size: 4.25 in (10.8 cm) wide x 3⅝ in (9.2 cm) tall, plus a 2 in (5.1 cm) hanging loop
  • Skill level: Easy (advanced beginner)
  • Terminology: US crochet terms
  • Yarn weight: DK / light worsted (weight 3) cotton
  • Hook: 3.5 mm (US E-4)
  • Number of pieces: 1 (single flat piece, no joining)
  • Layout: 3 shell tiers of 3, 2 and 1 shells, with the trunk centered below
  • Tree body before border: 4 in (10.2 cm) wide x 2.5 in (6.4 cm) tall
  • Trunk: 1 in (2.5 cm) wide x 1 in (2.5 cm) tall
  • Border depth: about ⅛ in (0.3 cm), one row of single crochet

Materials

Choose a smooth, mercerized or combed cotton in DK weight. Cotton shows the shell texture clearly, holds its shape on a branch and blocks crisply. Acrylic DK also works, but the fans will be a little softer.

  • Color A (peach): 6 g, about 15 m (16 yd)
  • Color B (brown): 2 g, about 5 m (5 yd)

These amounts include extra for checking your size and weaving in ends. One standard 50 g ball of each color will make many ornaments.

Tools:

  • 3.5 mm (US E-4) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch marker (optional)
  • Ruler or tape measure
  • Blocking mat and rust-proof pins
  • Spray bottle with water

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • RS – right side

Special stitch – Shell: 9 dc worked into the same ch-5 space. The dc fan out into a half circle. The 5th dc of each shell is the center dc. It is the anchor point for the next tier.

Standing sc: With a slip knot on the hook, insert the hook into the stitch, yarn over, pull up a loop, yarn over and pull through both loops. This starts a new color without a slip stitch and chain.

Gauge and Checkpoints

Gauge: 20 sc and 24 rows = 4 in (10.2 cm) in single crochet with a 3.5 mm hook. That is 5 sc and 6 rows per 1 in (2.5 cm).

Because this is one small piece, the best test is to make the ornament itself and check it at each stage. Measure it flat, without stretching.

  • After Row 1: the chain-loop row is about 3.75 in (9.5 cm) wide.
  • After Row 2: the bottom tier is 4 in (10.2 cm) wide and 1 in (2.5 cm) tall at the shell centers.
  • After Row 4: the middle tier is about 2.75 in (7.0 cm) wide and the body is 1.75 in (4.4 cm) tall.
  • After Row 6: the top shell is about 1.5 in (3.8 cm) wide and the body is 2.5 in (6.4 cm) tall.
  • After the border: 4.25 in (10.8 cm) wide and 2⅝ in (6.7 cm) tall.
  • Trunk: 1 in (2.5 cm) square.

If your piece is too big, go down to a 3.25 mm (US D-3) hook or tighten your chains. If it is too small, go up to a 3.75 mm (US F-5) hook. Shells that cup or ruffle usually mean the chain loops are too short or too long, not that your dc tension is off. Check the ch-5 loops first.

Coral crocheted Christmas tree ornament with open lacework pattern hanging from an evergreen branch, warm lights glowing behind.

Tree Body (Color A)

The body is worked in rows, turning at the end of every row. The tree looks the same on both sides, so pick the neater side as the RS when you finish.

Foundation: With A, ch 20.

Row 1 (base loops): Sc in 2nd ch from hook, [ch 5, sk next 5 ch, sc in next ch] 3 times. (4 sc, 3 ch-5 sps)

Check: 1 + (3 x 6) = 19 chains used. That matches the 19 chains after the turning chain. The 5 skipped chains under the middle loop stay free, and you will work the trunk into them later.

Row 2 (bottom tier shells): Ch 1, turn. Sc in first sc, [9 dc in next ch-5 sp, sc in next sc] 3 times. (31 sts: 4 sc + 27 dc, 3 shells)

Work the dc around the new ch-5 loop only, not around the skipped foundation chains.

Row 3 (middle tier loops): Turn. Sl st in first sc and in next 5 dc (you are now in the center dc of the first shell). Ch 1, sc in same dc, [ch 5, sk next 9 sts, sc in center dc of next shell] 2 times. (3 sc, 2 ch-5 sps)

The 9 skipped sts are the last 4 dc of one shell, the sc between shells and the first 4 dc of the next shell. The outer halves of the two end shells stay unworked. Each ch-5 loop arches over a sc between two shells, which opens the first two diamond holes.

Row 4 (middle tier shells): Ch 1, turn. Sc in first sc, [9 dc in next ch-5 sp, sc in next sc] 2 times. (21 sts: 3 sc + 18 dc, 2 shells)

Row 5 (top tier loop): Turn. Sl st in first sc and in next 5 dc. Ch 1, sc in same dc, ch 5, sk next 9 sts, sc in center dc of next shell. (2 sc, 1 ch-5 sp)

This loop arches over the dip between the two middle shells and makes the third diamond hole.

Row 6 (top shell): Ch 1, turn. Sc in first sc, 9 dc in ch-5 sp, sc in last sc. (11 sts: 2 sc + 9 dc, 1 shell)

Fasten off. Weave in the starting and ending tails now, before the border covers the edges.

Checkpoint: You have 6 shells in a 3-2-1 triangle with 3 diamond openings. The body measures 4 in (10.2 cm) wide x 2.5 in (6.4 cm) tall.

Border and Hanging Loop (Color A)

Border gauge: One row of sc adds about ⅛ in (0.3 cm) to each edge it covers. It covers both the left and right sides, so the width grows by ¼ in (0.6 cm), from 4 in to 4.25 in (10.2 cm to 10.8 cm). It adds ⅛ in to the top only, so the height grows from 2.5 in to 2⅝ in (6.4 cm to 6.7 cm).

The border is a single row worked along the outer edge only: up the right side, over the top and down the left side. You do not border the bottom foundation edge or the inner dips between shells.

Hold the tree with the bottom tier at the bottom. “Outer 4 dc” means the 4 dc of a shell that sit between the end sc and the center dc, on the outside edge of the tree.

Border Row: Join A with a standing sc in the side of the Row 1 end sc at the bottom right corner.

Right side (16 sc):

  • Tier 1: Sc in the top of the Row 2 end sc, then sc in each of the outer 4 dc of the right bottom shell. (6 sc, counting the standing sc)
  • Tier 2: Sc in the top of the Row 4 end sc, then sc in each of the outer 4 dc of the right middle shell. (5 sc)
  • Tier 3: Sc in the top of the Row 6 end sc, then sc in each of the next 4 dc of the top shell. (5 sc)

Top (2 sc + loop): In the center dc of the top shell, work (sc, ch 20, sc). (2 sc, 1 ch-20 loop)

Left side (16 sc):

  • Tier 3: Sc in each of the next 4 dc of the top shell, then sc in the top of the Row 6 end sc. (5 sc)
  • Tier 2: Sc in each of the outer 4 dc of the left middle shell, then sc in the top of the Row 4 end sc. (5 sc)
  • Tier 1: Sc in each of the outer 4 dc of the left bottom shell, sc in the top of the Row 2 end sc, then sc in the side of the Row 1 end sc. (6 sc)

Total: 16 + 2 + 16 = 34 sc, plus the ch-20 hanging loop. Fasten off and weave in.

Why the math works: Each shell has 9 dc. On an end shell, only the outer 4 dc and the end sc are exposed. The next tier’s sc covers the center dc, and the inner 4 dc face the middle of the tree. That gives 5 sc per tier per side, plus 1 extra sc on the bottom tier for the Row 1 edge: 6 + 5 + 5 = 16 per side. The whole top shell is exposed, so all 9 of its dc get a border: 4 on the right, 1 center dc holding 2 sc, and 4 on the left. Both sides match exactly, so the tree stays symmetrical and does not lean.

Trunk (Color B)

Turn the tree upside down so the foundation chain is on top. Find the 5 free chains that you skipped under the middle bottom shell in Row 1.

Row 1: Join B with a standing sc in the first of the 5 free chains, then sc in each of the next 4 chains. (5 sc)

Rows 2–6: Ch 1, turn, sc in each sc across. (5 sc)

Fasten off, leaving a 6 in (15.2 cm) tail. Weave it into the trunk edges, not into the peach shells, so no brown shows through.

Checkpoint: 5 sc at 5 sts per inch = 1 in (2.5 cm) wide. 6 rows at 6 rows per inch = 1 in (2.5 cm) tall. The trunk should sit exactly in the center, with 7 foundation chains on each side.

Final Blocking

  1. Lightly mist the ornament with water until it is damp but not dripping.
  2. Lay it flat on a blocking mat, right side up.
  3. Pin the bottom corners first, 4.25 in (10.8 cm) apart.
  4. Pin the top center point so the tree body is 2⅝ in (6.7 cm) tall.
  5. Ease each shell into a smooth half circle, pinning the fan edges if needed.
  6. Gently open each diamond hole with your fingertip.
  7. Pin the trunk square at 1 in (2.5 cm) by 1 in (2.5 cm), straight and centered.
  8. Lay the hanging loop straight up from the top point.
  9. Let it dry completely, at least a few hours, before unpinning.

For a firmer ornament, mist it with a light fabric stiffener instead of plain water.

Final Quality-Control Checklist

  • 6 shells in a 3-2-1 arrangement, each with 9 dc
  • 3 open diamond holes, all about the same size
  • 16 sc on each side of the border and 2 sc at the top center
  • Hanging loop centered on the top shell
  • Trunk 5 sc wide and 6 rows tall, centered under the middle shell
  • Finished size 4.25 in (10.8 cm) x 3⅝ in (9.2 cm), plus the loop
  • All tails woven in and trimmed, with no brown showing on the peach

Troubleshooting

Shells look crowded or cup upward. Your ch-5 loops are too tight. Chain more loosely, or go up half a hook size for the chain loops only.

Shells ruffle or flare. The loops are too loose, or you added a 10th dc. Recount to 9 dc per shell.

The tree leans to one side. One side of the border has the wrong count. Check for 16 sc on each side.

Diamond holes are closed up. You probably anchored a ch-5 loop in the wrong dc. Each loop must run from center dc to center dc, skipping exactly 9 sts.

The trunk is off-center. Count the free foundation chains. There should be 7 on each side of the trunk: a sc, 5 skipped chains and a sc.

The hanging loop twists. Chain evenly and block it straight. For a sturdier, flatter loop, slip-stitch back along the chain.

Care

Hand wash in cool water with mild soap, press out the water in a towel and dry flat. If needed, reshape and pin the shells while damp.

Hand holding a coral crocheted Christmas tree ornament hanging from an evergreen branch with warm golden lights twinkling in background.

Final Notes

The measurements build in a short, easy-to-track chain. A gauge of 5 sc and 6 rows per inch gives a 3.75 in (9.5 cm) loop row, which opens into a 4 in (10.2 cm) bottom tier. Three tiers of shells bring the body to 2.5 in (6.4 cm) tall. One sc border row, with 16 sc per side and 2 at the top, finishes the body at 4.25 in (10.8 cm) by 2⅝ in (6.7 cm). The 1 in (2.5 cm) trunk brings the tree to 3⅝ in (9.2 cm), and the 2 in (5.1 cm) loop makes it 5⅝ in (14.3 cm) overall.

Make one in peach, then try a whole tree’s worth in different shades.

Happy crocheting!

Leave a Comment