This doorway curtain is made from long lace strips that look like climbing vines on a garden trellis. Each strip has an airy cream mesh background, a wavy plum vine, pointed leaves in two colors, and little clusters of raised berries.
The palette is soft and classic. Cream is used for the mesh, the fan flowers, and half of the leaves. Dusty plum is used for the vines, berries, the rest of the leaves, and the outer frames. Two strips have plum frames and two have cream frames, which gives the finished curtain a gentle striped rhythm.
The pattern uses US crochet terms. Each joined curtain half measures 13 in (33.0 cm) wide and 71.5 in (181.6 cm) long. The hanging tabs add 2.5 in (6.4 cm), for 74 in (188.0 cm) overall.
The construction is simple and modular. You work four mesh strips in rows and frame each one with a round of single crochet. Then you sew on the vine, leaves, berries, and fan, and join the strips in pairs. A scalloped bottom border and a tabbed top border finish each half.
Finished Size and Construction
- Finished size (one half): 13 in x 71.5 in (33.0 cm x 181.6 cm), plus 2.5 in (6.4 cm) tabs
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Sport (#2), mercerized cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 4 strips, joined into 2 halves of 2 strips each
- Layout: each half is 2 strips wide x 1 strip tall
- Strip body size: 6 in x 70 in (15.2 cm x 177.8 cm)
- Strip size after frame round: 6.5 in x 70.5 in (16.5 cm x 179.1 cm)
- Half size before border: 13 in x 70.5 in (33.0 cm x 179.1 cm)
- Border depth: 0.75 in (1.9 cm) scallops at the bottom, a 0.25 in (0.6 cm) band at the top, plus tabs
Materials
Choose a smooth mercerized cotton in sport weight. It shows the mesh crisply, holds the raised berries well, and launders easily. Avoid fuzzy yarns, which blur the lace.
- Cream: 400 g / about 1,320 m (1,444 yd)
- Plum: 200 g / about 660 m (722 yd)
Tools:
- 3.5 mm (E-4) crochet hook
- Tapestry needle
- Rust-proof pins and a long blocking surface
- Measuring tape
- Stitch markers
- Spray bottle
The yarn quantities include a margin of about 15 percent for swatching and appliqué tails.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
- BLO – back loop only
Mesh: one dc plus the ch-2 space beside it, closed by the next dc.
Bobble: [yarn over, insert hook in st, yarn over, pull up a loop, yarn over, pull through 2 loops] 5 times in the same st, yarn over, pull through all 6 loops on hook.
Gauge and Checkpoints
Gauge is 4 meshes and 4 mesh rows = 2 in (5.1 cm), so one mesh is 0.5 in (1.3 cm) square. Frame gauge is 6 sc = 1 in (2.5 cm).
Make one full strip first and check it before you start the others:
- After Row 1: 6 in (15.2 cm) wide.
- After Row 20: 10 in (25.4 cm) long.
- After Row 70: 35 in (88.9 cm) long.
- After Row 140: 70 in (177.8 cm) long.
- After the frame round: 6.5 in x 70.5 in (16.5 cm x 179.1 cm).
If your strip is too big, go down one hook size. If it is too small, go up one size. Small width errors multiply across four strips, and length errors build up over 140 rows, so correct them early.

Strip (Make 4)
With cream, ch 41.
Row 1 (RS): Dc in 8th ch from hook, [ch 2, sk 2 ch, dc in next ch] 11 times, turn. (12 meshes; 13 dc)
Row 2: Ch 5 (counts as dc and ch 2), dc in next dc, [ch 2, dc in next dc] 10 times, ch 2, sk 2 ch, dc in 3rd ch of turning ch, turn. (12 meshes; 13 dc)
Rows 3–140: Repeat Row 2. Count 13 dc at the end of every tenth row. (12 meshes; 13 dc per row)
Fasten off. The strip body is 6 in x 70 in (15.2 cm x 177.8 cm).
Frame Round
Use plum for 2 strips (Strip A) and cream for 2 strips (Strip B).
Rnd 1 (RS): Join the frame color in the first corner dc of Row 140. Ch 1, 3 sc in same st, [2 sc in next ch-2 sp, sc in next dc] 11 times, 2 sc in last ch-2 sp, 3 sc in corner st. Rotate and work 3 sc in each row end down the side (420 sc). Rotate again. Working into the foundation, 3 sc in the corner, [2 sc in next ch-2 sp, sc at base of next dc] 11 times, 2 sc in last sp, 3 sc in corner. Rotate and work 3 sc in each row end up the side (420 sc). Sl st to first sc. Fasten off. (922 sc)
The center sc of each 3-sc group is the corner stitch. Counting from corner to corner, including both corner stitches:
- Each short side: 1 + 1 + 33 + 2 + 1 + 1 = 39 sts
- Each long side: 1 + 1 + 420 + 1 + 1 = 424 sts
Check: 4 corner groups (12) + 2 short runs of 35 + 2 long runs of 420 = 922.
Appliqués
Leaf (Make 7 cream and 7 plum per strip)
Ch 9.
Rnd 1: Sc in 2nd ch from hook, hdc in next ch, dc in each of next 3 ch, hdc in next ch, sc in next ch, 3 sc in last ch (tip). Working along the other side of the chain, sc in next ch, hdc in next ch, dc in each of next 3 ch, hdc in next ch, sc in last ch. (17 sts)
Stem: Ch 6, sl st in 2nd ch from hook and in each ch back (5 sl st). Sl st in first sc. Fasten off, leaving a 10 in (25.4 cm) tail.
With the opposite color, backstitch a center vein along the foundation chain. Each leaf is a pointed almond shape, 2.25 in x 1 in (5.7 cm x 2.5 cm).
Berry (Make 21 plum per strip)
Ch 3. Bobble in 3rd ch from hook. Ch 1 to close. Fasten off, leaving an 8 in (20.3 cm) tail. Each berry is about 0.5 in (1.3 cm).
To make a cluster, knot the tails of 3 berries together 0.5 in (1.3 cm) above the berries. That short stretch becomes the berry stem. (7 clusters per strip)
Fan Flower (Make 1 cream per strip)
Ch 4, sl st in first ch to form a ring.
Row 1: Ch 3 (counts as dc), 6 dc in ring, turn. (7 dc)
Row 2: Ch 3 (counts as dc), dc in first st, 2 dc in each of next 5 dc, dc in 3rd ch of turning ch, turn. (13 dc)
Row 3: Ch 1, sc in first dc, [ch 3, sk 1 dc, sc in next st] 6 times. (7 sc, 6 ch-3 loops)
Fasten off. The fan is 2.5 in (6.4 cm) wide and 1.25 in (3.2 cm) deep.
Vine Cord (Make 1 plum per strip)
Chain until the cord measures 80 in (203.2 cm) relaxed. Sl st in the back bump of the 2nd ch from hook and in each ch back. Fasten off.
Placing the Appliqués
Number the mesh columns 1 to 12 from right to left. Pin the vine so it starts at column 6 on Row 1, curves to column 4 at Row 5, curves to column 9 at Row 15, and returns to column 6 at Row 20. Repeat this wave 7 times up to Row 140. The curves take up the extra cord length. Trim any excess and secure the end.
Whipstitch the vine to the mesh with plum. In each 20-row wave:
- Sew 1 cream leaf on the outside of the left curve and 1 plum leaf on the outside of the right curve, with the stems touching the vine.
- Hang 1 berry cluster from the lower edge of the curve and tie its stem to the vine.
Sew the fan flower centered against the top frame, with the ring at the top and the loops pointing down. Sew only around the outer edges so the appliqués stay raised.
Make All Pieces
For the whole curtain:
- Cream: 4 strip bodies, 2 frame rounds, 28 leaves, 4 fans
- Plum: 2 frame rounds, 28 leaves, 84 berries (28 clusters), 4 vine cords
Layout, as seen from the RS:
Left half Right half
[ A ][ B ] [ B ][ A ]
The plum-framed A strips sit on the outer edges. The cream-framed B strips sit toward the center opening.
Joining
Join each pair along the long sides that face each other: the inner long side of Strip A to the inner long side of Strip B.
Hold both strips with WS together and the frames aligned. With cream, join at the bottom corner stitches. Sl st through the BLO of both layers, one stitch to one stitch, up to the top corner stitches. (424 sl st)
The 1:1 match works because every long side has exactly 424 sts. If you are off by one or two stitches at the top, a frame round has a miscount. Fix the frame instead of skipping stitches.
Keep the slip stitches relaxed, and stretch the seam slightly every 10 in (25.4 cm). A tight seam will pucker the whole half.
Checkpoint: each joined half measures 13 in x 70.5 in (33.0 cm x 179.1 cm).
Border
Work the border on each joined half separately, along the top and bottom only. The frame rounds already finish the long outer sides. Border gauge is 6 sc = 1 in (2.5 cm).
The starting count across each short edge is 2 strips x 39 sts = 78 sts. No stitches are added at the seam, because the seam sl sts sit behind the frame stitches.
Bottom Scallop Row
With RS facing, join plum in the right bottom corner st.
Row 1: Ch 1, sc in first st, [sk 1, 5 dc in next st, sk 1, sc in next st] 19 times, sc in last st. Fasten off. (19 scallops)
Math: 1 + (19 x 4) + 1 = 78.
Top Tab Band
Row 1 (RS): Join plum in the right top corner st. Ch 1, sc in each st across, turn. (78 sc)
Tab: Sc in next st, ch 16, sl st in top of that sc, work 26 sc into the ch-16 loop, sl st in same sc. (Each tab uses 1 base st.)
Row 2: Ch 1, sc in first 3 sts, tab, sc in next 15 sts, tab, sc in next 15 sts, tab, sc in next 6 sts, tab, sc in next 15 sts, tab, sc in next 15 sts, tab, sc in last 3 sts. Fasten off. (78 base sts, 6 tabs)
Math: 3 + 1 + 15 + 1 + 15 + 1 + 6 + 1 + 15 + 1 + 15 + 1 + 3 = 78. This places the tabs at sts 4, 20, and 36 of each 39-st strip, so every strip is symmetrical. Each tab hangs 2.5 in (6.4 cm) and fits a rod up to 1.25 in (3.2 cm) thick.
Final Blocking
- Soak each half in cool water for 15 minutes.
- Roll it in a towel to press out the water. Do not wring.
- Lay the half flat, RS up, on a long blocking surface.
- Pin the long sides straight, 13 in (33.0 cm) apart.
- Pin the length to 71.5 in (181.6 cm) from the scallop tips to the top band.
- Pin each scallop point and open each mesh square evenly.
- Shape the leaves and fans by hand, and fluff the berries.
- Let it dry completely before unpinning.
Final Quality-Control Checklist
- Every mesh row has 12 meshes and 13 dc.
- Each frame round has 922 sc: 39 sts on each short side and 424 sts on each long side.
- Each strip has 7 cream leaves, 7 plum leaves, 7 berry clusters, 1 vine, and 1 fan.
- Each joining seam has 424 sl st and lies flat.
- The bottom border has 19 scallops per half.
- The top band has 78 sts and 6 evenly spaced tabs.
- Each half measures 13 in x 71.5 in (33.0 cm x 181.6 cm) without the tabs.
- All tails are woven in on the WS.
Troubleshooting
Mesh leans to one side: You are missing the last dc into the turning chain. Count 13 dc per row.
Strip is too short: Your dc are short. Go up one hook size or pull up a taller first loop.
Frame ruffles: Your rows may be shorter than 0.5 in (1.3 cm). In that case only, work 2 sc per row end instead of 3, and recount both long sides so they still match.
Vine puckers the mesh: Your whipstitches are too tight. Resew with looser stitches every 0.5 in (1.3 cm).
Berries are flat: Close each bobble firmly and push it outward from the WS with a finger.
Tabs twist: Spread the 26 sc evenly over the loop before closing it.
Care
Hand wash in cool water with mild soap and dry flat. Reshape and pin lightly if the mesh relaxes over time.

Final Notes
The measurement chain is simple. One mesh is 0.5 in (1.3 cm), 12 meshes make a 6 in (15.2 cm) strip, and 140 rows make 70 in (177.8 cm). The frame round brings each strip to 6.5 in x 70.5 in (16.5 cm x 179.1 cm). Two joined strips give a 13 in (33.0 cm) half. The border brings each half to 71.5 in (181.6 cm), and the 2.5 in (6.4 cm) tabs make it 74 in (188.0 cm) overall.
Check the first strip carefully, and the rest will fall into place.
Happy crocheting!