Terracotta Daisy Phone Charging Holder Crochet Pattern

This wall-hanging charging holder keeps your phone off the floor and your cable tidy while it charges. A tall back panel hangs from a cream strap. A front pocket holds the phone, and a narrow side strip with a keeper band holds the coiled cable.

The main fabric is warm rust/terracotta cotton in a pebbled sc/dc texture, and every piece is edged in cream. A cream daisy with a mustard-yellow center and an olive-green leaf sprig decorate the pocket, giving it a cozy cottage look.

This pattern uses US crochet terms. The finished holder measures 8 in (20.3 cm) wide by 10.5 in (26.7 cm) tall, or about 13.5 in (34.3 cm) tall including the strap.

You’ll work three textured panels in rows, give each one a cream border, and crochet a small band, a strap, and two appliqués. Then you sew everything together stitch to stitch.

Finished Size and Construction

  • Finished size: 8 in × 10.5 in (20.3 cm × 26.7 cm), plus a strap arch of about 3 in (7.6 cm)
  • Skill level: Easy–Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 7 (back panel, front pocket, cable strip, keeper band, hanging strap, flower, leaf sprig)
  • Layout: pocket on the lower back panel; cable strip along the right edge
  • Back panel: 6 × 10.5 in (15.2 × 26.7 cm); 5.5 × 10 in (14.0 × 25.4 cm) before border
  • Front pocket: 6 × 6.5 in (15.2 × 16.5 cm); 5.5 × 6 in (14.0 × 15.2 cm) before border
  • Cable strip: 2 × 6.5 in (5.1 × 16.5 cm); 1.5 × 6 in (3.8 × 15.2 cm) before border
  • Border depth: 0.25 in (0.6 cm) per side

Materials

Use a smooth worsted-weight cotton or cotton blend. Cotton holds its shape against a wall and shows the pebbled texture clearly.

  • Rust/terracotta (MC): 120 g / 185 m
  • Cream (CC1): 40 g / 62 m
  • Mustard yellow (CC2): 5 g / 8 m
  • Olive green (CC3): 8 g / 12 m

Tools: 4.5 mm (US 7) hook, tapestry needle, stitch markers, rust-proof pins, scissors, measuring tape, blocking mat, and a spray bottle.

All quantities include a margin of roughly 15% for your swatch and any minor tension differences.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sk – skip
  • st(s) – stitch(es)
  • sp – space
  • rep – repeat
  • Rnd – round

Special stitch – Pebble Pattern (sc/dc): Worked over an even number of stitches. Each row alternates sc and dc. On every following row, work a sc into each dc and a dc into each sc. The short and tall stitches stagger, which creates the nubby, pebbled texture. The turning ch-1 does not count as a stitch.

Gauge and Checkpoints

Gauge: 16 sts and 14 rows = 4 in (10.2 cm) in Pebble Pattern. Single crochet along the border also works at 16 sts = 4 in (10.2 cm).

Make the cable strip first and treat it as your test piece. It’s small, but it checks both stitch and row gauge.

  • Checkpoint 1: After Row 1, the strip is 1.5 in (3.8 cm) wide.
  • Checkpoint 2: After Row 21, the strip is 6 in (15.2 cm) tall.
  • Checkpoint 3: After the border, the strip is 2 × 6.5 in (5.1 × 16.5 cm).

If it’s too big, switch to a 4 mm (US G-6) hook. If it’s too small, switch to a 5 mm (US H-8) hook. Get gauge right before you start the back panel, because every border and seam count depends on it.

Close-up of cream daisy with golden center and green leaves appliqué on burnt-orange crochet with cream trim.

Back Panel (Make 1)

With MC, ch 23.

Row 1: Sc in 2nd ch from hook, dc in next ch, *sc in next ch, dc in next ch; rep from * across. (22 sts: 11 sc, 11 dc)

Row 2: Ch 1, turn. *Sc in next dc, dc in next sc; rep from * across. (22 sts)

Rows 3–35: Rep Row 2. (22 sts per row)

Fasten off. The panel should measure 5.5 × 10 in (14.0 × 25.4 cm).

Front Pocket (Make 1)

With MC, ch 23.

Row 1: Work as Back Panel Row 1. (22 sts)

Rows 2–21: Work as Back Panel Row 2. (22 sts per row)

Fasten off. The pocket should measure 5.5 × 6 in (14.0 × 15.2 cm). It’s the same width as the back panel, and the pebbled cotton stretches to fit a phone up to about 0.4 in (1.0 cm) thick.

Cable Strip (Make 1)

With MC, ch 7.

Row 1: Sc in 2nd ch from hook, dc in next ch, *sc in next ch, dc in next ch; rep from * once more. (6 sts)

Rows 2–21: Work as Back Panel Row 2. (6 sts per row)

Fasten off. The strip should measure 1.5 × 6 in (3.8 × 15.2 cm).

Keeper Band (Make 1)

With CC1, ch 11.

Row 1: Sc in 2nd ch from hook and in each ch across. (10 sc)

Row 2: Ch 1, turn, sc in each st across. (10 sc)

Fasten off and leave a 10 in (25.4 cm) tail. The band measures 2.5 × 0.5 in (6.4 × 1.3 cm). It’s 0.5 in (1.3 cm) longer than the bordered strip is wide, and that slack leaves room for the cable coil.

Hanging Strap (Make 1)

With CC1, ch 37.

Row 1: Sc in 2nd ch from hook and in each ch across. (36 sc)

Row 2: Ch 1, turn, sc in each st across. (36 sc)

Fasten off and leave a 12 in (30.5 cm) tail. The strap measures 9 × 0.5 in (22.9 × 1.3 cm).

Daisy Flower (Make 1)

Rnd 1: With CC2, make a magic ring, ch 1, work 6 sc in the ring, sl st to first sc. (6 sc)

Rnd 2: Ch 1, 2 sc in each st around, sl st to first sc. (12 sc) Fasten off CC2.

Rnd 3: Join CC1 with a sl st in any st. *Ch 3, sk next st, sl st in next st; rep from * around, ending with the final sl st in the joining st. (6 ch-3 sps)

Rnd 4: *In next ch-3 sp work (sc, hdc, 3 dc, hdc, sc), sl st in next sl st; rep from * around. (6 petals; 42 petal sts + 6 sl sts)

Fasten off and leave a long tail. The flower is 2.5 in (6.4 cm) across.

Leaf Sprig (Make 1)

Leaf (used 5 times): Ch 7. Sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, hdc in next ch, sc in last ch. (6 sts) Rotate and work along the free loops on the other side of the chain: sc in first ch, hdc in next, dc in next 2, hdc in next, sc in last ch. (6 sts) Ch 1, then work 5 sl sts down the center of the leaf, through the middle of the foundation chain, back to the base. This makes the center vein. (12 leaf sts per leaf)

Sprig: With CC3, ch 16.

Sl st in 2nd ch from hook and in next 2 ch. *Work Leaf, sl st in next 3 ch of the stem; rep from * 3 more times. Work Leaf once more for the tip. (15 stem sl sts, 5 leaves)

Fasten off and leave a long tail. The sprig is about 4 in (10.2 cm) long, and each leaf is about 1.25 in (3.2 cm) long.

Make All Pieces

MC: back panel, front pocket, cable strip (3 pieces).
CC1: keeper band, hanging strap, flower petals, plus all borders and seams.
CC2: flower center.
CC3: leaf sprig.

Layout (front view):

        [ STRAP ARCH ]
+----------------+
|   BACK PANEL   |
|   (upper 4 in) |
+----------------+-----+
|  FRONT POCKET  |CABLE|
| sprig + daisy  |STRIP|
|                |=BAND|
+----------------+-----+

Border (All Three Panels)

Border gauge: 16 sc = 4 in (10.2 cm), the same as the body. Each corner is 3 sc worked into one stitch. The center sc of that group is the corner stitch, and it belongs to both adjoining sides. Every per-side count below includes its 2 corner stitches.

Rnd 1 (sc): With CC1, join in the first stitch of the last row. Work 3 sc in the first st, then sc along the top edge. Work 3 sc in the last st. Sc down the row ends, then work 3 sc in the first foundation ch. Sc along the foundation chain, work 3 sc in the last ch, and sc up the remaining row ends. Join with a sl st to the first sc.

Rnd 2 (sl st): Sl st in each sc around, keeping the tension relaxed. Join and fasten off. This makes the raised cream outline without adding width.

Back panel:
– Top and bottom: 3 + 20 + 3 = 26 sc each, or 24 per side including corners.
– Each long side: 38 sc across 35 row ends (1 sc per row end, plus 1 extra in Rows 9, 18, and 27), or 42 per side including corners.
– Rnd 1 total: 26 + 38 + 26 + 38 = 128 sc (check: 24 + 42 + 24 + 42 − 4 shared corners = 128).
– Rnd 2: 128 sl sts.

Front pocket:
– Top and bottom: 26 sc each, or 24 per side.
– Each side: 22 sc across 21 row ends (1 per row end, plus 1 extra in Row 11), or 26 per side.
– Rnd 1 total: 26 + 22 + 26 + 22 = 96 sc (check: 24 + 26 + 24 + 26 − 4 = 96).
– Rnd 2: 96 sl sts.

Cable strip:
– Top and bottom: 3 + 4 + 3 = 10 sc each, or 8 per side.
– Each side: 22 sc across 21 row ends, as for the pocket, or 26 per side.
– Rnd 1 total: 10 + 22 + 10 + 22 = 64 sc (check: 8 + 26 + 8 + 26 − 4 = 64).
– Rnd 2: 64 sl sts.

Why the math works: At 4 sts per in (1.6 sts per cm), 24 sts measure 6 in (15.2 cm), 42 sts measure 10.5 in (26.7 cm), 26 sts measure 6.5 in (16.5 cm), and 8 sts measure 2 in (5.1 cm). Those are exactly the bordered sizes. The rows are slightly taller than the stitches are wide, so the edges need a few extra sc per side to lie flat.

Joining

Join with CC1 using a whipstitch through the outer loops of the Rnd 2 slip stitches. Work one stitch to one stitch, and pull each wrap snug enough to close the gap without puckering the edge.

1. Pocket to back panel: Lay the pocket on the back panel with the bottom edges and corners aligned. Pin at each corner and every 1 in (2.5 cm).
– The pocket’s 26 left-side sts match the lowest 26 sts of the back panel’s 42-st left side.
– Next come the 24 bottom sts, then 26 sts up the right side.
– That’s 26 + 24 + 26 − 2 shared corners = 74 seam stitches.
– Leave the pocket’s 24 top sts open.

2. Cable strip to body: Place the strip to the right of the body with the bottom edges level. Whipstitch the strip’s 26 left-side sts to the body’s 26 lowest right-side sts, catching all three layers: strip, pocket, and back panel.

3. Keeper band: Center the band 3.25 in (8.3 cm) above the strip’s bottom edge. Sew each short end to a long edge of the strip, letting the 0.5 in (1.3 cm) of slack bow forward.

4. Strap: On the wrong side of the back panel, place each strap end 0.75 in (1.9 cm) in from a side edge. Let it overlap the top border by 0.5 in (1.3 cm), and sew it down securely through the back layer only.

5. Appliqués: Pin the sprig angled up and to the left in the lower-left area of the pocket. Pin the daisy to its right, with the flower center 2.75 in (7.0 cm) above the pocket’s bottom edge. Sew both through the pocket layer only, so the pocket still opens freely.

Size checkpoint: The joined holder should measure 8 in (20.3 cm) wide by 10.5 in (26.7 cm) tall.

Final Blocking

  1. Lightly mist the holder with water until it’s damp but not soaked.
  2. Lay it face up on a blocking mat.
  3. Pin the back panel to 6 × 10.5 in (15.2 × 26.7 cm), then pin the strip edge to bring the total width to 8 in (20.3 cm).
  4. Ease the corners into soft curves with your fingertips instead of pulling them square.
  5. Shape the daisy petals and the leaf tips flat.
  6. Let it dry completely, at least 12 hours.
  7. Unpin and test the pocket with your phone.

Final Quality-Control Checklist

  • [ ] All three panels match their bordered sizes.
  • [ ] Border Rnd 1 counts are 128, 96, and 64.
  • [ ] No corners cup or ruffle.
  • [ ] The pocket seam has 74 stitches, and its top is open.
  • [ ] The strip seam has 26 stitches, and the bottom edges are level.
  • [ ] The keeper band has visible slack.
  • [ ] The strap ends are hidden and secure.
  • [ ] The appliqués are sewn through the pocket only.
  • [ ] All yarn tails are woven in.

Troubleshooting

Texture looks like plain rows: You’re working sc into sc. Always work sc into dc and dc into sc.

Edges slant: You lost or gained a stitch. Count 22 (or 6) after every few rows.

Border ruffles: Your Rnd 1 tension is too loose, or you added extra sc. Recount against the per-side numbers.

Border pulls in: You skipped the extra row-end sc. Add them in the rows listed.

Phone is too snug: Block the pocket a little wider while it’s damp, or choose a softer cotton.

Daisy cups: Your Rnd 4 is tight. Steam it lightly and press it flat.

Holder tilts on the wall: Re-center the strap ends so they’re both exactly 0.75 in (1.9 cm) from the edges.

Care

Spot clean, or hand wash in cool water with mild soap. Reshape and dry flat, and keep it away from the charger plug until it’s completely dry.

Crocheted orange wall organizer with cream trim and daisy flower, holding a smartphone and cable against white brick.

Final Notes

Everything follows one measurement chain. The gauge of 16 sts = 4 in (10.2 cm) gives the 22-st panels a width of 5.5 in (14.0 cm). The border brings them to 24 sts per side, or 6 in (15.2 cm). Adding the 2 in (5.1 cm) cable strip gives the final 8 in (20.3 cm) width. On the vertical side, 35 rows at 10 in (25.4 cm) become 42 border sts at 10.5 in (26.7 cm), and the pocket’s 26-st sides seam stitch for stitch onto the back panel. If you check each step, the finished holder will hang straight and fit your phone.

Happy crocheting!

Leave a Comment