Caramel Lace Tree Ornament Crochet Pattern

This little tree ornament is made of stacked shell fans framed in creamy chain lace. The rows of caramel fans get narrower from four at the base to a single fan at the top. A small cream cap finishes the tip, and a solid chocolate-brown trunk sits below.

The colors are warm and neutral: caramel tan, cream and dark brown. Together they look like gingerbread with frosting. The style is classic lace, but the shape stays crisp because each tier locks into the one below it.

This pattern uses US crochet terms. The finished ornament measures 4.25 in (10.8 cm) wide at the base and 4.5 in (11.4 cm) tall from trunk to tip. The hanging loop adds about 1.5 in (3.8 cm).

You work the tree from the bottom up in flat rows, switching between a tan fan row and a cream arch row. Each new tier of fans sits between the fans below it, so the tree narrows on its own. A cream single crochet cap closes the top. One cream border round adds the bottom scallops, covers the sides and makes the hanging loop. Last, you work the trunk straight off the bottom center.

Finished Size and Construction

  • Finished size: 4.25 in (10.8 cm) wide x 4.5 in (11.4 cm) tall, plus a 1.5 in (3.8 cm) loop
  • Skill level: Easy to intermediate (you should be comfortable with shells and color changes)
  • Terminology: US crochet terms
  • Yarn weight: Sport weight (#2) cotton or cotton blend
  • Hook: 3.0 mm (C/D)
  • Number of pieces: 1 (one flat ornament)
  • Layout: A triangle of fans in tiers of 4, 3, 2 and 1, with a cap on top and a trunk below
  • Size before border: 4 in (10.2 cm) wide x 3.5 in (8.9 cm) tall
  • Border depth: About 0.125 in (0.3 cm) on the sides; the bottom arches hang about 0.25 in (0.6 cm)

Materials

Choose a smooth sport-weight cotton, either mercerized or combed. Cotton gives crisp fans and holds its shape on the tree. Avoid fuzzy yarns, because they blur the lace arches.

  • Color A, caramel tan (fans): 6 g, about 19 m
  • Color B, cream (arches, cap, border, loop): 5 g, about 16 m
  • Color C, dark chocolate brown (trunk): 2 g, about 6 m

These amounts include a margin of roughly 25%. Leftover yarn from other projects is usually enough.

Tools:

  • 3.0 mm (C/D) crochet hook
  • Tapestry needle
  • Scissors
  • 2–3 locking stitch markers
  • Ruler or tape measure
  • Blocking mat and rust-proof pins
  • Spray bottle with water

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • sc3tog – single crochet 3 together
  • sp – space
  • st(s) – stitch(es)
  • RS – right side
  • rep – repeat

Special stitch – Shell: Work 7 dc in the same stitch. The 4th dc of the shell is the center dc.

Gauge and Checkpoints

The ornament is small, and every tier depends on the one below it, so gauge matters. Make Rows 1–2 as a test first and measure them.

  • Gauge: 1 shell repeat (a shell plus 1 sc, over 8 base sts) = 1 in (2.5 cm) wide. Row 1 has 33 sts and measures 4 in (10.2 cm) wide x 0.5 in (1.3 cm) tall.
  • After Row 2: 0.75 in (1.9 cm) tall
  • After Row 4: 1.5 in (3.8 cm) tall
  • After Row 6: 2.25 in (5.7 cm) tall
  • After Row 7: 2.75 in (7.0 cm) tall
  • After Row 11 (before the border): 4 in (10.2 cm) wide x 3.5 in (8.9 cm) tall
  • After the border and trunk: 4.25 in (10.8 cm) wide x 4.5 in (11.4 cm) tall

If Row 1 is too wide: Use a 2.75 mm hook, or make your foundation chain tighter.
If Row 1 is too narrow: Use a 3.25 mm hook, or make only the foundation chain with a hook one size larger.
If the fans are too tall or floppy: Pull up less yarn on each dc.

Crocheted tan and cream yarn squares forming an interlocking grid pattern with detailed twisted stitches.

Pattern Notes

  • Work every row of the tree body (Rows 1–7) with the RS facing you. Fasten off at the end of each row and rejoin at the right-hand edge. This keeps all the fans facing the same way.
  • Turn the cap rows (Rows 8–11) as usual.
  • In Rows 3, 5 and 7, never work into the cream ch-3 spaces. They stay free and show between the fans.

Tree Body

Row 1 (Color A, RS)

Ch 34.

Sc in 2nd ch from hook, *skip 3 ch, shell in next ch, skip 3 ch, sc in next ch; rep from * 3 more times.

Count: 4 shells and 5 sc = 33 sts (4 x 7 + 5). Fasten off.

Chain math: After you skip the first ch, 33 ch remain. The first sc uses 1 ch and each repeat uses 8 (3 + 1 + 3 + 1), so 1 + 4 x 8 = 33.

Checkpoint: 4 in (10.2 cm) wide, 0.5 in (1.3 cm) tall.

Row 2 (Color B, RS)

Join B with a sl st in the first sc at the right edge. Ch 1, sc in same sc, *ch 3, sc in center dc of next shell, ch 3, sc in next sc; rep from * 3 more times.

Count: 9 sc and 8 ch-3 sps = 33 sts (9 + 8 x 3). Fasten off.

These arches frame each fan. The 5 sc on top of the Row 1 sc are the “between” points. The 4 sc on the center dc are the “center” points.

Checkpoint: 0.75 in (1.9 cm) tall.

Row 3 (Color A, RS)

Join A with a sc in the first center sc. *Shell in next between sc, sc in next center sc; rep from * 2 more times.

Count: 3 shells and 4 sc = 25 sts (3 x 7 + 4). Fasten off.

The 3 new shells sit in the valleys between the 4 bottom fans. The tree loses half a fan on each side, which makes the sides slope.

Row 4 (Color B, RS)

Join B with a sl st in the first sc. Ch 1, sc in same sc, *ch 3, sc in center dc of next shell, ch 3, sc in next sc; rep from * 2 more times.

Count: 7 sc and 6 ch-3 sps = 25 sts (7 + 6 x 3). Fasten off.

Checkpoint: 1.5 in (3.8 cm) tall.

Row 5 (Color A, RS)

Join A with a sc in the first center sc. *Shell in next between sc, sc in next center sc; rep from * once more.

Count: 2 shells and 3 sc = 17 sts (2 x 7 + 3). Fasten off.

Row 6 (Color B, RS)

Join B with a sl st in the first sc. Ch 1, sc in same sc, *ch 3, sc in center dc of next shell, ch 3, sc in next sc; rep from * once more.

Count: 5 sc and 4 ch-3 sps = 17 sts (5 + 4 x 3). Fasten off.

Checkpoint: 2.25 in (5.7 cm) tall.

Row 7 (Color A, RS)

Join A with a sc in the first center sc. Shell in next between sc, sc in last center sc.

Count: 1 shell and 2 sc = 9 sts (7 + 2). Fasten off.

Checkpoint: 2.75 in (7.0 cm) tall.

Top Cap

Row 8 (Color B, RS): Join B with a sl st in the first sc of Row 7. Ch 1, sc in same sc, sc in each of next 7 dc, sc in last sc. (9 sc)

Row 9: Ch 1, turn. Sc2tog, sc in next 5 sts, sc2tog. (7 sc)

Row 10: Ch 1, turn. Sc2tog, sc3tog, sc2tog. (3 sts)

Row 11: Ch 1, turn. Sc3tog. (1 st)

Fasten off. Mark this stitch as the top point.

Checkpoint: 4 in (10.2 cm) wide x 3.5 in (8.9 cm) tall. Each side should show one free ch-3 space from each of Rows 2, 4 and 6.

Border

The border is one round in Color B. It adds the scallops under the bottom fans, wraps the stepped sides in a firm cord and makes the hanging loop.

Border gauge: Put 4 sc in each ch-3 sp and 1 sc in each row end. Each ch-6 bottom arch spans one 8-chain fan repeat.

Border Round (Color B, RS)

Bottom edge: Hold the piece with the RS facing you and the foundation chain at the top. Join B with a sc in the foundation ch at the base of the first sc of Row 1. *Ch 6, sc in the foundation ch at the base of the next sc; rep from * 3 more times.

Bottom count: 5 sc and 4 ch-6 arches = 29 sts (5 + 4 x 6).

Right side, working upward:
– 1 sc in each row end of Rows 1 and 2 (2 sc)
– 4 sc in the end ch-3 sp of Row 2
– 1 sc in each row end of Rows 3 and 4 (2 sc)
– 4 sc in the end ch-3 sp of Row 4
– 1 sc in each row end of Rows 5 and 6 (2 sc)
– 4 sc in the end ch-3 sp of Row 6
– 1 sc in the row end of Row 7
– 1 sc in each row end of Rows 8–11 (4 sc)

Right side count: 23 sc.

Top point: In the marked stitch, work (sc, ch 20, sc). The ch 20 becomes the hanging loop.

Left side, working downward: Work the same sequence in reverse:
– 4 sc over Rows 11–8
– 1 sc in Row 7
– 4 sc in the Row 6 ch-3 sp
– 2 sc over Rows 6–5
– 4 sc in the Row 4 ch-3 sp
– 2 sc over Rows 4–3
– 4 sc in the Row 2 ch-3 sp
– 2 sc over Rows 2–1

Left side count: 23 sc.

Sl st in the first sc to join. Fasten off.

Round total: 5 + 23 + 2 + 23 = 53 sc, plus 24 ch in the bottom arches and 20 ch in the loop.

Why the Math Works

Each side has 7 body row ends (2 + 2 + 2 + 1), 3 free ch-3 sps (3 x 4 = 12 sc) and 4 cap row ends. That gives 7 + 12 + 4 = 23 sc per side. Both sides match, so the triangle stays symmetrical. Four sc fill a ch-3 sp without stretching it, so the sides lie flat. On the bottom edge, the 5 sc land on the same 5 points as the Row 1 sc, so each arch hangs under exactly one fan.

Checkpoint: 4.25 in (10.8 cm) wide. The body plus the bottom arches is 3.75 in (9.5 cm) tall.

Trunk

Row 1 (Color C, RS): Find the 3rd (center) bottom sc of the border. Join C with a sl st in the 5th ch of the arch just before it. Ch 1, sc in same ch, sc in 6th ch of the same arch, sc in center sc, sc in 1st and 2nd ch of next arch. (5 sc)

Rows 2–6: Ch 1, turn, sc in each st across. (5 sc)

Fasten off.

Checkpoint: The trunk is 0.75 in (1.9 cm) wide x 1 in (2.5 cm) tall. About 0.25 in (0.6 cm) of it overlaps the arches, so it adds 0.75 in (1.9 cm) below them. Total height: 3.75 in + 0.75 in = 4.5 in (11.4 cm).

Final Blocking

  1. Weave in all the ends through stitches of the same color.
  2. Mist the ornament until it is damp but not soaked.
  3. Lay it RS up on the mat.
  4. Pin the bottom corners 4.25 in (10.8 cm) apart.
  5. Pin the top point so the body plus the arches measures 3.75 in (9.5 cm) tall, centered between the corners.
  6. Spread each fan gently so its 7 dc fan out evenly.
  7. Pin each bottom arch into a round scallop.
  8. Straighten the trunk so the full height is 4.5 in (11.4 cm).
  9. Shape the loop into a teardrop about 1.5 in (3.8 cm) tall.
  10. Let it dry completely. Use light spray starch if you want it stiffer.

Final Quality-Control Checklist

  • The fan tiers count 4, 3, 2 and 1 from the bottom.
  • Every fan has 7 dc and opens upward.
  • Each upper fan sits centered in a valley of the tier below.
  • Each side has 23 border sc, and both sides match.
  • There are 4 even bottom scallops.
  • The trunk is 5 sc wide and centered.
  • The ornament measures 4.25 in (10.8 cm) x 4.5 in (11.4 cm), plus the loop.
  • All ends are secure.

Troubleshooting

The tree leans: You may have skipped a center sc or joined at the wrong end. Count the center and between points before each fan row.

The fans cup or ruffle: Keep all your dc the same height, and block firmly.

The sides pucker: You have more than 4 sc in a ch-3 sp. Rework it with exactly 4.

The bottom arches are tight: Work the ch-6 more loosely.

The trunk is off center: Rejoin at the 3rd bottom sc, counting carefully.

Care

Hand wash in cool water with mild soap. Roll the ornament in a towel to remove water, then dry it flat. Store it flat in tissue paper between seasons.

Handmade crocheted Christmas tree ornament with tan and cream colors, hanging on frosted evergreen branch with lights.

Final Notes

All the measurements build on each other. Each shell repeat is 1 in (2.5 cm), so Row 1 is 4 in (10.2 cm) wide. Each tier adds about 0.75 in (1.9 cm), and the cap brings the body to 3.5 in (8.9 cm) tall. The border brings the width to 4.25 in (10.8 cm), and the trunk brings the height to 4.5 in (11.4 cm). If your Row 1 matches the gauge, the rest of the tree will come out the right size.

Happy crocheting!

Leave a Comment