Fernlight Beaded Curtain Crochet Pattern

Fernlight is a light, airy window curtain made from crocheted fern leaves. Fifty-four leaf motifs hang on nine vertical strands. A natural wooden bead sits between each pair of leaves, and every strand ends in a soft tassel.

The strands alternate between two greens: a pale sage-mint and a deep emerald. Five strands are pale and four are dark, so the curtain starts and ends with a pale strand. Each leaf has a chained center stem, a small upright tip leaflet and six pairs of pointed leaflets. The leaflets get bigger toward the base, so each leaf looks like a small fern frond.

This pattern uses US crochet terms. The finished curtain measures about 35.5 in (90.2 cm) wide across the nine strands and 58.5 in (148.6 cm) from the top of the rod to the tassel tips.

You make each leaf as its own piece. Chain the stem, then slip stitch back down it, working the leaflets as short branches on the way. You then join the leaves into strands with beaded chain links, add a hanging loop at the top, and finish each strand with a beaded link and a tassel at the bottom.

Finished Size and Construction

  • Finished size: 35.5 in (90.2 cm) wide x 58.5 in (148.6 cm) long
  • Skill level: Easy-intermediate (repetitive, but needs consistent tension)
  • Terminology: US crochet terms
  • Yarn weight: DK (#3) cotton
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 54 leaf motifs (30 pale, 24 dark), plus 9 tassels
  • Layout: 9 strands x 6 leaves, one color per strand, colors alternating
  • Piece size: 7 in (17.8 cm) long, loop to loop, x 3.5 in (8.9 cm) wide
  • Size before border: 53.75 in (136.5 cm) per strand, from rod to the last leaf’s bottom loop
  • Border depth: 4.75 in (12.1 cm), made up of a 1.75 in (4.4 cm) bottom bead link and a 3 in (7.6 cm) tassel

Materials

Choose a smooth mercerized or matte cotton DK that holds its shape. Acrylic will work, but the leaflets will curl more and need firmer blocking.

  • Pale green (sage-mint): 200 g, about 480 m (four 50 g balls of 120 m)
  • Dark green (emerald): 150 g, about 360 m (three 50 g balls of 120 m)

These quantities include a margin of about 15% for gauge differences, tails and tassel trimming. A single leaf uses about 11.5 m (about 5 g). A full strand uses about 75 m, including links and tassel.

Tools:

  • 4.0 mm (G-6) crochet hook
  • 54 natural wooden beads, 12 mm, with holes of at least 3 mm
  • Tapestry needle
  • Scissors
  • Stiff card 3.5 in (8.9 cm) wide, for tassels
  • Blocking mat and rust-proof pins
  • Spray bottle
  • Curtain rod or dowel, at least 38 in (96.5 cm) long

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • st(s) – stitch(es)

Special stitches

All leaflets are worked into the back bumps of a fresh chain. The skipped chain at the far end becomes the leaflet’s point.

  • Leaflet S (small): Ch 7. Starting in the 2nd ch from hook: sc, hdc, dc, dc, hdc, sc (6 sts). Sl st in the same stem ch the leaflet started from.
  • Leaflet M (medium): Ch 9. Starting in the 2nd ch from hook: sc, hdc, dc in each of next 4 ch, hdc, sc (8 sts). Sl st in the same stem ch.
  • Leaflet L (large): Ch 11. Starting in the 2nd ch from hook: sc, hdc in each of next 2 ch, dc in each of next 4 ch, hdc in each of next 2 ch, sc (10 sts). Sl st in the same stem ch.
  • Pair: Work two leaflets of the same size, one after the other, from the same stem ch. Push the first to the left and the second to the right.

Because the stitches go short-tall-short, each leaflet becomes a pointed oval. The dc posts show as fine ribs across the middle.

Gauge and Checkpoints

Chain gauge: 5 ch = 1 in (2.5 cm), measured after the stem has been slip stitched back.

Make one complete leaf first and block it before you start the rest. Check it at each stage:

  1. Leaflet S: 1.2 in (3.0 cm) long
  2. Leaflet M: 1.6 in (4.1 cm) long
  3. Leaflet L: 2 in (5.1 cm) long
  4. Stem (32 ch): 6.4 in (16.3 cm)
  5. Whole leaf, blocked: 7 in (17.8 cm) loop to loop, and 3.5 in (8.9 cm) across the largest pair

If your leaf is too big: Go down to a 3.5 mm hook, or chain more firmly. A leaf 0.5 in (1.3 cm) too long adds 3 in (7.6 cm) to every strand.

If your leaf is too small: Go up to a 4.5 mm hook. Also check that your slip stitches back along the stem are not pulling the chain tight.

Delicate pale green crocheted fern ornament with lacy leaves arranged symmetrically on white marble.

Leaf Motif (make 54)

You start at the bottom loop and chain up to the top loop. Then you work back down the stem.

Foundation

  1. Ch 6, sl st in 1st ch to form the bottom loop.
  2. Ch 32 for the stem.
  3. Ch 6, sl st in the 6th ch from hook to form the top loop.

Foundation count: 44 ch (6 bottom loop + 32 stem + 6 top loop).

The 32 stem chains are numbered from the top (just below the top loop) down. Work every sl st into the back bump of the stem ch.

Return along stem

  1. Neck: Sl st in stem ch 1–3 (3 sl st). Work Leaflet S from stem ch 3. This is the tip leaflet.
  2. Pair 1: Sl st in stem ch 4–7 (4 sl st). Work a Pair of Leaflet S from stem ch 7.
  3. Pair 2: Sl st in stem ch 8–11 (4 sl st). Work a Pair of Leaflet S from stem ch 11.
  4. Pair 3: Sl st in stem ch 12–15 (4 sl st). Work a Pair of Leaflet M from stem ch 15.
  5. Pair 4: Sl st in stem ch 16–19 (4 sl st). Work a Pair of Leaflet M from stem ch 19.
  6. Pair 5: Sl st in stem ch 20–23 (4 sl st). Work a Pair of Leaflet L from stem ch 23.
  7. Pair 6: Sl st in stem ch 24–27 (4 sl st). Work a Pair of Leaflet L from stem ch 27.
  8. Base: Sl st in stem ch 28–32 (5 sl st). Sl st in the joining st of the bottom loop. Fasten off and weave in the ends.

Stem count: 3 + (6 x 4) + 5 = 32 sl st, one in each stem ch.

Leaflet count: 13 (1 tip + 12 in pairs), made up of 5 S, 4 M and 4 L.

Leaflet stitch count: (5 x 6) + (4 x 8) + (4 x 10) = 102 sts.

Slip stitching back down the stem makes it look thicker and braided. The 4-chain gaps space the pairs about 0.8 in (2.0 cm) apart.

Make All Pieces

  • Pale green: 30 leaves (5 strands x 6)
  • Dark green: 24 leaves (4 strands x 6)

Block the leaves before joining them (see Final Blocking). Joining is much easier when the loops are already set.

Layout grid (P = pale, D = dark; columns are strands, read left to right):

Strand:  1  2  3  4  5  6  7  8  9
Leaf 1:  P  D  P  D  P  D  P  D  P
Leaf 2:  P  D  P  D  P  D  P  D  P
Leaf 3:  P  D  P  D  P  D  P  D  P
Leaf 4:  P  D  P  D  P  D  P  D  P
Leaf 5:  P  D  P  D  P  D  P  D  P
Leaf 6:  P  D  P  D  P  D  P  D  P

Joining

Method: Beaded chain links, worked in the strand’s own color.

Link between leaves (5 per strand):

  1. Cut a 20 in (50.8 cm) length of yarn and thread one bead onto it.
  2. Sl st through the bottom loop of the upper leaf. Work around the whole 6-ch loop, not into a single ch, so the link hangs centered.
  3. Ch 3. Slide the bead up against the hook, then ch 3. The first ch after the bead locks it in place.
  4. Sl st through the top loop of the next leaf, again around the whole loop. Fasten off and weave in the ends.

Stitch-to-stitch logic: Each link joins exactly one bottom loop to one top loop, with 6 ch and one bead in between. The leaves themselves never touch, so there is nothing to match stitch for stitch, and the strand length is set by chain count alone.

Hanging loop (1 per strand): Join yarn to the top loop of leaf 1. Ch 30, then sl st back into the same top loop. The loop is 6 in (15.2 cm) around and folds over the rod, giving a 3 in (7.6 cm) drop.

Tension: Use the same hand tension for links as you did for stems. If one link is loose, that strand will hang lower than the others.

Size checkpoint: Each link measures 1.75 in (4.4 cm) including the bead. A strand before the border measures 3 + (6 x 7) + (5 x 1.75) = 53.75 in (136.5 cm). Hang all nine strands side by side and compare them. They should match within 0.5 in (1.3 cm).

Border

This curtain has no fabric border. Each strand hangs free, so the “border” is the finish at the end of every strand.

Border gauge: This uses the same chain gauge, 5 ch = 1 in (2.5 cm). The 12 mm bead adds about 0.5 in.

Round 1 – bottom bead link (1 per strand, 9 total):

  1. Thread one bead onto a 20 in (50.8 cm) length of yarn.
  2. Sl st around the bottom loop of leaf 6.
  3. Ch 3, slide the bead up, ch 3.
  4. Fasten off, leaving a 6 in (15.2 cm) tail.

Count: 6 ch + 1 bead per strand, 1.75 in (4.4 cm).

Round 2 – tassel (1 per strand, 9 total):

  1. Wrap yarn 20 times around the 3.5 in (8.9 cm) card.
  2. Slide a 10 in (25.4 cm) tie through the top of the wraps, then cut along the bottom edge. This gives 20 strands, each 7 in (17.8 cm) long, folded in half.
  3. Tie the tassel through the last ch of the bottom link.
  4. Wrap the neck 0.5 in (1.3 cm) below the top with 18 in (45.7 cm) of yarn and bury the ends inside the tassel.
  5. Trim to 3 in (7.6 cm).

Why the math works: Each strand’s total length comes from a fixed sequence of equal parts. Every strand has 1 hanging drop, 6 leaves, 5 links and 1 border link of the same size, so all nine strands come out the same length:

53.75 + 1.75 + 3 = 58.5 in (148.6 cm)

Final Blocking

  1. Pin each leaf face up on the mat, with the stem perfectly straight.
  2. Fan each leaflet up and out at about 45 degrees from the stem. Pin the tip leaflet pointing straight up beside the neck.
  3. Pin the outer point of each leaflet to sharpen it.
  4. Open the top and bottom loops into neat rounds.
  5. Mist until damp, not soaked. Leave to dry completely.
  6. After joining, hang the finished strands and mist the links and tassels lightly so they drop straight.
  7. Brush the tassels and trim them evenly to 3 in (7.6 cm) once they are dry.

Final Quality-Control Checklist

  • 54 leaves: 30 pale, 24 dark
  • Every leaf has 13 leaflets: 1 tip and 6 pairs graded S, S, M, M, L, L
  • Every leaf measures 7 in (17.8 cm) x 3.5 in (8.9 cm)
  • 54 beads used: 5 between leaves and 1 at the bottom of each strand
  • All nine strands measure 58.5 in (148.6 cm), within 0.5 in (1.3 cm)
  • Colors alternate P-D-P-D-P-D-P-D-P across the rod
  • Strand centers are spaced 4 in (10.2 cm) apart, which puts 32 in (81.3 cm) between the outer centers
  • All ends are woven in or buried in the tassels

Troubleshooting

Leaflets curl or twist: Your chain is tighter than your stitches. Chain with a slightly larger hook, or block with more pins.

Leaflets don’t fan to both sides: Push the first leaflet of each pair firmly to the left before you make the second one.

Stem is wavy: Your slip stitches are too tight. Loosen them, or work them through the back bump only.

Strands are different lengths: Count the chains in each link and hanging loop. One extra chain adds 0.2 in (0.5 cm).

Beads slide: Make sure the first chain after the bead is pulled snug against it.

Tassels look thin: Wrap the card 24 times instead of 20.

Care

Hand wash in cool water with a mild detergent and roll in a towel to remove the water. Lay each strand flat, reshape the leaflets and let it dry before rehanging.

Crocheted leaf garlands in shades of green hung as a window decoration with wooden beads and tassels at the bottom.

Final Notes

The whole curtain depends on one measurement chain. First, 5 ch = 1 in (2.5 cm). That gives a leaf of 7 in (17.8 cm) and a link of 1.75 in (4.4 cm). Those parts build a 53.75 in (136.5 cm) strand before the border, and adding the bottom link and tassel brings it to 58.5 in (148.6 cm). Nine strands spaced 4 in (10.2 cm) apart make a curtain 35.5 in (90.2 cm) wide. Get the first leaf right and every other measurement will follow.

Happy crocheting!

Leave a Comment