Lavender Hoot Owl Curtain Crochet Pattern

This curtain is a row of small openwork owls that turns a plain window into something playful. Nine strands hang from a wooden rod. Each strand holds four owls, with a wooden bead between each pair and a soft tassel at the bottom.

The colors alternate between light lilac and deep plum, starting and ending with lilac. The wooden beads add warmth and a little weight, which helps every strand hang straight. The style is boho and lacy, but each owl uses only simple stitches: chain, single crochet, half double crochet, and double crochet.

This pattern uses US crochet terms. Each finished owl measures 3.5 in (8.9 cm) wide by 4.5 in (11.4 cm) tall. Each strand drops about 33.5 in (85.1 cm) from the rod, and the full curtain is about 35.5 in (90.2 cm) wide.

First you make two joined eye rings. Then you work a small shell-stitch body upward in rows and join the eyes in the last body row. Three edging rounds add the ears, wings, and bottom arches. Finally, you link the owls into strands with beaded chains and give each strand a top loop and a tassel.

Finished Size and Construction

  • Finished curtain: 35.5 in (90.2 cm) wide x 33.5 in (85.1 cm) long
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK / light (#3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 36 owl motifs, 9 tassels, 45 beaded connectors
  • Layout: 9 strands x 4 owls, strands hanging free
  • Owl size (finished): 3.5 in (8.9 cm) x 4.5 in (11.4 cm)
  • Owl size before border: 2.25 in (5.7 cm) wide x 3.1 in (7.9 cm) tall
  • Border depth: about 0.625 in (1.6 cm) at each side, including the wings; about 0.7 in (1.8 cm) at the top (with ears) and at the bottom (with arches)

Materials

Choose a smooth mercerized or combed cotton in DK weight. The amounts below assume a yarn with about 115 m per 50 g.

  • Color A, Lilac: about 135 g / 310 m (20 owls, 5 tassels, 5 strands of connectors)
  • Color B, Plum: about 110 g / 250 m (16 owls, 4 tassels, 4 strands of connectors)
  • 3.5 mm (E-4) crochet hook
  • 1.0 mm steel hook or dental-floss threader, for pulling a loop through the beads
  • 45 natural wooden beads, 12 mm, with holes at least 4 mm wide
  • Stiff card, 3.5 in (8.9 cm) tall, for the tassels
  • Tapestry needle, scissors, stitch markers
  • Blocking board, rust-proof pins, spray bottle
  • Curtain rod at least 40 in (101.6 cm) long and no more than 1.25 in (3.2 cm) in diameter

Each owl uses about 11 m (5 g), each tassel about 6 m, and each strand’s loop and connectors about 3 m. The quantities above include a margin of about 15% for gauge differences and tails.

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • sk: skip
  • sc2tog: single crochet 2 together
  • st(s): stitch(es)
  • RS / WS: right side / wrong side

Special stitches

  • Shell: 5 dc in the same stitch.
  • Joining sc: Insert the hook through the marked eye sc (front to back), then into the next body st. Yarn over and pull through both, then yarn over and pull through 2 loops. Counts as 1 sc.
  • Ear spike: Ch 4, sl st in 2nd ch from hook, sc in next ch, hdc in next ch. Does not count as a stitch.
  • Bead lock: Remove the hook and use the steel hook to pull the working loop through one bead. Slide the bead down, put the hook back in the loop, and ch 1 tightly. This locking ch counts as the first ch after the bead.

Gauge and Checkpoints

Make one complete owl before anything else. It is your gauge swatch, and it tells you whether the curtain will hang at the stated size.

  • Chain gauge: 11 ch = 2 in (5.1 cm)
  • Single crochet gauge: 11 sc = 2 in (5.1 cm) along a straight edge; 5 sc = 1 in (2.5 cm) along row ends

Checkpoints:

  1. Each eye: 1.1 in (2.8 cm) across.
  2. Body after Row 1: 2.25 in (5.7 cm) wide.
  3. Body after Row 6: 2.25 in (5.7 cm) wide x 2 in (5.1 cm) tall.
  4. Core with eyes: 3.1 in (7.9 cm) tall.
  5. Finished owl after border: 3.5 in (8.9 cm) x 4.5 in (11.4 cm).

If your owl is more than 0.25 in (0.6 cm) too big, go down to a 3.25 mm hook. If it is too small, go up to a 3.75 mm hook. Four owls that are each 0.25 in (0.6 cm) too long add 1 in (2.5 cm) to every strand.

Lavender crocheted owl with wooden beads and tassel hanging against a white marble background.

Owl Pattern

Eyes (make 2, joined)

Eye 1: Ch 6, sl st in first ch to form a ring.
Rnd 1: Ch 1, 14 sc in ring, sl st in first sc. (14 sc) Fasten off and weave in the tails.

Eye 2: Ch 6, sl st in first ch to form a ring.
Rnd 1: Ch 1, 7 sc in ring, sl st in any sc of Eye 1 (this is the eye junction), 7 sc in ring, sl st in first sc. (14 sc) Fasten off.

Mark the junction. On each eye, skip the 2 sc just below the junction on the lower curve and place a marker in the next sc. These two marked sc are where the eyes join the body.

Body (worked bottom up in rows)

Foundation: Ch 14.

Row 1 (RS): Sc in 2nd ch from hook, [sk 2 ch, shell in next ch, sk 2 ch, sc in next ch] twice. Turn. (13 sts: 2 shells, 3 sc)

Row 2 (WS): Ch 3 (counts as dc), 2 dc in first sc, sc in 3rd dc of next shell, shell in next sc, sc in 3rd dc of next shell, 3 dc in last sc. Turn. (13 sts: 1 shell, 2 half shells, 2 sc)

Row 3: Ch 1, sc in first dc, shell in next sc, sc in 3rd dc of center shell, shell in next sc, sc in top of turning ch. Turn. (13 sts)

Row 4: Repeat Row 2. (13 sts)

Row 5: Ch 1, sc in each st across, including the top of the turning ch. Turn. (13 sc)

Row 6 (eye-joining row, WS): Hold the eyes above the body with their RS facing away from you, the same way as the body. Ch 1, sc in first 3 sc. Work a joining sc in the next sc through the marked sc of the first eye. Sc in next 5 sc. Work a joining sc in the next sc through the marked sc of the second eye. Sc in last 3 sc. (13 sc) Do not fasten off. Turn so the RS faces you.

The core now measures 2.25 in (5.7 cm) wide and 3.1 in (7.9 cm) tall. Go straight on to the three border rounds in the Border section.

Make All Pieces

Each owl is the core above plus the three border rounds. Finish the border on every owl before you link any strands.

  • Lilac: 20 owls, 5 tassels
  • Plum: 16 owls, 4 tassels

Layout grid (rod at top, L = lilac strand, P = plum strand):

Strand:  1  2  3  4  5  6  7  8  9
Owl 1:   L  P  L  P  L  P  L  P  L
Owl 2:   L  P  L  P  L  P  L  P  L
Owl 3:   L  P  L  P  L  P  L  P  L
Owl 4:   L  P  L  P  L  P  L  P  L
Tassel:  L  P  L  P  L  P  L  P  L

Each strand is one color: owls, connectors, and tassel all match.

Joining (Building the Strands)

The owls join only vertically, using beaded chain connectors. Strands are never joined to each other, so you can easily part the curtain by hand.

Joining points: The top joining point is the pair of sc on either side of the V notch at the top center in Rnd 3. The bottom joining point is the 4th of the 7 sc in the center bottom arch.

Top loop and first connector: Make a slipknot, ch 24, and sl st in first ch to form the rod loop. Ch 4, bead lock, ch 3 more (4 ch after the bead). Insert hook through both top joining sc of Owl 1 and sl st. Fasten off.

Middle connectors (3 per strand): Join yarn with a sl st in the bottom joining sc of the owl above. Ch 4, bead lock, ch 3 more, then sl st through both top joining sc of the next owl. Fasten off.

Bottom connector: Join yarn with a sl st in the bottom joining sc of Owl 4. Ch 4, bead lock, ch 3 more. Fasten off, leaving an 8 in (20.3 cm) tail for the tassel.

Tassels: Wrap yarn 30 times around the 3.5 in (8.9 cm) card. Thread the connector tail under the wraps at the top edge and tie tightly. Cut the wraps along the bottom edge. Wrap a separate strand 6 times around the tassel 0.5 in (1.3 cm) below the top, tie off, and bury the ends inside the tassel.

Every connector is 8 ch plus 1 bead, about 2 in (5.1 cm) long. Keep the chains firm but not tight. If the chain is loose, the bead slides and the strand twists.

Lay each finished strand flat and check it:

  • Rod loop: 2 in (5.1 cm) when folded
  • 4 owls: 18 in (45.7 cm)
  • 5 connectors: 10 in (25.4 cm)
  • Tassel: 3.5 in (8.9 cm)
  • Total: 33.5 in (85.1 cm)

Border (Owl Edging, Rounds 1–3)

Work this border on every owl, starting from the end of Row 6. There is no extra border around the assembled curtain, so no seam stitches are ever added to these counts.

Border gauge: 11 sc = 2 in (5.1 cm) along straight edges; 5 sc = 1 in (2.5 cm) along row ends.

Rnd 1 (outline): Ch 1. Work down the side toward the bottom with 10 sc evenly along the row ends (2 sc in each of Rows 1–4, 1 sc in each of Rows 5–6). This is Side B. Sc in each of the 13 foundation ch loops (bottom). Work up the other side with 10 sc along the row ends the same way (Side A).

First eye: sc in next 7 free sc, ear spike, sc in next 3 sc. Sc2tog over the 2 sc that meet at the top of the eye junction. Second eye: sc in next 3 sc, ear spike, sc in next 7 sc. Sl st in first sc. Leave the 2 sc between each eye’s junction and its body join unworked.

Counts per side: Side B 10, bottom 13, Side A 10, head 21 (10 + 1 + 10), plus 2 ear spikes. (54 sc)

Rnd 2 (arches and wings): Ch 1, sc in first sc (Side B sc 1, top). Ch 16, sk Side B sc 2–10, sc in first bottom sc. [Ch 5, sk 3 sc, sc in next sc] 3 times. Ch 16, sk Side A sc 1–9, sc in Side A sc 10 (top).

First eye: sc in next 7 sc. On the ear, work 3 sc up one side, (sc, ch 2, sc) in the tip, and 3 sc down the other side. Sc in next 3 sc. Sl st in the sc2tog. Second eye: sc in next 3 sc, work the ear as before, sc in next 7 sc. Sl st in first sc.

Counts per side: Side B 1 sc + 1 ch-16 wing; bottom 4 sc + 3 ch-5 arches; Side A 1 sc + 1 ch-16 wing; head 36 sc (7 + 8 + 3 + 3 + 8 + 7) + 2 ch-2 tips + 1 sl st. (42 sc)

Rnd 3 (cover round): Ch 1. Sc in each sc, 20 sc in each ch-16 wing, 7 sc in each ch-5 arch, and (sc, ch 2, sc) in each ear tip. Skip the sl st at the top notch. Sl st in first sc. Fasten off and weave in the ends.

This is a conversion round: 42 sc worked 1 per existing sc + 65 sc worked into spaces (40 + 21 + 4) = 107 sc, plus 2 ch-2 tips.

Counts per side: Side B 21 (1 + 20), bottom 25 (4 + 21), Side A 21 (20 + 1), head 40 (36 + 4). Total: 21 + 25 + 21 + 40 = 107.

Why the math works: The bottom has 13 sc for 13 foundation loops, so it stays at the core’s 2.25 in (5.7 cm). Anchors at sc 1, 5, 9, and 13 divide it into 3 equal arches over 3 sc each. The 10 row-end sc match the 2 in (5.1 cm) body height at 5 sc per inch. Each ch-16 wing spans that same 2 in and bows out about 0.625 in (1.6 cm); 20 sc cover its curved outer edge without rippling. All 14 sc of each eye are used: 1 at the junction or in the sc2tog, 7 + 3 in the outline, 1 body join, and 2 left free.

Final Blocking

  1. Draw a 3.5 in (8.9 cm) x 4.5 in (11.4 cm) rectangle on paper and pin it under clear plastic on your board.
  2. Lay one strand flat, owls face up.
  3. Pin each owl to the rectangle: ear tips at the top corners, wing curves at the sides, and the three bottom arches open.
  4. Push a pin through each eye ring to keep it round.
  5. Straighten the connectors so the beads sit centered.
  6. Spray until damp, not soaked, and let dry completely.
  7. Steam each tassel lightly, comb the strands straight, and trim the ends level at 3.5 in (8.9 cm).

Final Quality-Control Checklist

  • Each owl measures 3.5 in (8.9 cm) x 4.5 in (11.4 cm) after blocking.
  • Both ears are the same height, and both wings bow out evenly.
  • The three bottom arches are open and equal.
  • Every bead is locked and does not slide.
  • Each strand measures 33.5 in (85.1 cm) from the fold of the loop to the tassel tip.
  • The colors alternate L, P, L, P, L, P, L, P, L.
  • All tails are woven in at least 1 in (2.5 cm) and trimmed.

Troubleshooting

  • Body cups or curls: The shells are too tight. Loosen your dc or go up a hook size.
  • Wings ruffle: Too many sc in the ch-16. Work 18 sc instead.
  • Wings lie flat against the body: The ch-16 is too tight. Chain more loosely.
  • Eyes are oval: The ring chain is twisted or the sc are bunched. Spread the 14 sc evenly before joining.
  • Strand twists: A connector is joined off-center. Rejoin exactly at the notch and the center bottom sc.
  • Strands are different lengths: Compare owls before linking and move any owl that is a different size into the same position on each strand.

Care

Hand wash in cool water with mild soap, roll in a towel to press out the water, and dry flat with the owls pinned to shape. Keep the curtain out of strong direct sun so the plum stays deep.

Handmade crocheted owl curtain in alternating lavender and purple tones, suspended on a wooden rod across a bright, sunny window.

Final Notes

The measurement chain is simple. Each eye is 1.1 in (2.8 cm), the body is 2.25 in (5.7 cm) x 2 in (5.1 cm), and the core is 3.1 in (7.9 cm) tall. The border brings each owl to 3.5 in (8.9 cm) x 4.5 in (11.4 cm). Four owls, five 2 in (5.1 cm) connectors, a 2 in (5.1 cm) loop, and a 3.5 in (8.9 cm) tassel make a 33.5 in (85.1 cm) strand. Nine strands spaced 4 in (10.2 cm) apart, center to center, make a 35.5 in (90.2 cm) curtain.

Happy crocheting!

Leave a Comment