Autumn Bloom Plastic Bag Holder Crochet Pattern

The Autumn Bloom Plastic Bag Holder is a tall crochet tube that keeps grocery bags tidy. You pull them out one at a time through an oval slot near the bottom. The body is warm cream, with a rust stripe near the base and a solid rust band at the top.

The front carries a small bouquet: three orange flowers with dark brown centers, curving green chain stems and two leaves. A ribbed rust strap and a yarn-covered ring at the top let it hang from a cabinet hook or door knob.

The pattern uses US crochet terms. The finished body measures about 6 in (15.2 cm) wide laid flat and 13.8 in (35.1 cm) tall. With the strap and ring, it is about 18.3 in (46.5 cm) long.

Construction is simple. You crochet a flat circle base, then work the body upward in joined, turned single crochet rounds. A few rows leave the slot, and a rust top band finishes the rim. The ring, strap and appliqués are made separately and sewn on.

Finished Size and Construction

  • Finished size: 6 in (15.2 cm) wide flat x 13.8 in (35.1 cm) tall; 18.3 in (46.5 cm) with hanger
  • Skill level: Easy-intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4), cotton or cotton blend
  • Hooks: 5.0 mm (H-8) for body, strap and ring; 4.0 mm (G-6) for appliqués
  • Number of pieces: 1 body, 1 strap, 1 covered ring, 3 flowers, 3 stems, 2 leaves
  • Layout: Single tube, slot centered on the front, bouquet above it
  • Body circumference: 48 sts = 12 in (30.5 cm)
  • Wall height before top band: 11.1 in (28.2 cm)
  • Top band depth: 0.9 in (2.3 cm), 4 rounds

Materials

Choose a smooth worsted-weight cotton. Cotton holds its shape under the weight of stuffed bags and shows stitch definition well. The amounts below assume a yarn of about 50 g = 78 m.

  • Cream (body): 80 g / 125 m
  • Rust (stripe, top band, slot edging, strap, ring): 30 g / 47 m
  • Orange (petals): 10 g / 16 m
  • Dark brown (flower centers): 5 g / 8 m
  • Green (stems and leaves): 8 g / 12 m

All quantities include a margin of roughly 20 percent.

Tools

  • 5.0 mm (H-8) and 4.0 mm (G-6) crochet hooks
  • 3 in (7.6 cm) wooden or plastic ring
  • Stitch markers
  • Tapestry needle
  • Scissors
  • Sewing pins
  • Measuring tape

Abbreviations (US Terms)

  • ch chain
  • sc single crochet
  • hdc half double crochet
  • dc double crochet
  • sl st slip stitch
  • inc 2 sc in same stitch
  • BLO back loop only
  • sp space
  • st(s) stitch(es)

Joined, turned round: Ch 1 (does not count as a stitch), turn, work the round, then sl st to the first sc. Turning every round gives the same texture as rows, so the slot rows blend in.

Color change: Complete the final sl st of a round with the new color.

Gauge and Checkpoints

Gauge with the 5.0 mm hook is 16 sc and 18 rounds = 4 in (10.2 cm) in joined, turned sc rounds.

Make the base first as your test. It is small, and it tells you what you need to know before you start the tall body.

  • After Rnd 8: The base is 3.6 in (9.1 cm) across and lies flat.
  • After Rnd 17: The wall above the base is 2 in (5.1 cm) tall. The tube is 6 in (15.2 cm) wide when flattened.
  • After Rnd 23: The slot is 4 in (10.2 cm) wide and 0.9 in (2.3 cm) tall.
  • After Rnd 58: The wall is 11.1 in (28.2 cm) tall.
  • After Rnd 62: The wall is 12 in (30.5 cm) tall.

If your base is too big, go down half a hook size. If it is too small, go up half a hook size. If the base ruffles, your tension is too loose; if it cups, it is too tight.

Crocheted rust-orange flower with textured black center appliquéd on cream knitted background.

Base

Use the 5.0 mm hook and cream.

Rnd 1: Make a magic ring, ch 1, work 6 sc in the ring, sl st to the first sc. (6)

Rnd 2: Ch 1, turn, inc in each st around, join. (12)

Rnd 3: Ch 1, turn, (sc 1, inc) 6 times, join. (18)

Rnd 4: Ch 1, turn, (sc 2, inc) 6 times, join. (24)

Rnd 5: Ch 1, turn, (sc 3, inc) 6 times, join. (30)

Rnd 6: Ch 1, turn, (sc 4, inc) 6 times, join. (36)

Rnd 7: Ch 1, turn, (sc 5, inc) 6 times, join. (42)

Rnd 8: Ch 1, turn, (sc 6, inc) 6 times, join. (48)

Checkpoint: The base is 3.6 in (9.1 cm) across.

Body

From here on, every round is a joined, turned round of 48 sc. With no more increases, the base curves up into the wall and makes the rounded bottom.

Rnds 9–10: With cream, sc in each st around. (48)

Rnds 11–13: Change to rust. Sc in each st around. (48)

Rnds 14–17: Change to cream. Sc in each st around. (48)

Checkpoint: The wall is 2 in (5.1 cm) tall. Place a marker at the join. This is the side seam, and the slot will be centered on the front.

Slot

Row 18: Ch 1, turn, sc in the next 32 sts. Leave the last 16 sts unworked. (32)

Rows 19–21: Ch 1, turn, sc in each of the 32 sts. (32)

You are now back at the edge where Row 18 began.

Rnd 22: Ch 1, turn, sc in each of the 32 sts, ch 16, sl st to the first sc of this round. (32 sc + 16 ch = 48)

Rnd 23: Ch 1, turn. Sc in each of the 16 ch, working under one loop only so the free loops stay available for edging. Then sc in each of the 32 sc and join. (16 + 32 = 48)

Checkpoint: The opening is 4 in (10.2 cm) wide and 0.9 in (2.3 cm) tall. When the tube is flattened, there is 1 in (2.5 cm) of fabric on each side of the slot.

Upper Body

Rnds 24–58: With cream, sc in each st around. (48)

Checkpoint: You have 11.1 in (28.2 cm) of wall. Do not fasten off. The rust top band is worked in the Border section.

Strap

Use the 5.0 mm hook and rust.

Row 1: Ch 6, sc in the 2nd ch from the hook and in each ch across. (5)

Rows 2–18: Ch 1, turn, sc in BLO of each st. (5)

Fasten off, leaving a 12 in (30.5 cm) tail. The strap is 1.25 in (3.2 cm) wide and 4 in (10.2 cm) long, with ridges along its length.

Covered Ring

Use the 5.0 mm hook and rust. Attach the yarn to the 3 in (7.6 cm) ring with a sl st. Work sc around the ring, about 54 sc, until it is completely hidden. Push the stitches together as you go. Sl st to the first sc, fasten off and weave in the end.

Flowers

Use the 4.0 mm hook. Each flower is a solid brown center with one layer of orange petals.

Large Flower (make 1)

Rnd 1: With brown, make a magic ring, work 8 sc, join. (8)

Rnd 2: Ch 1, 2 sc in each st, join. Fasten off brown. (16)

Rnd 3: Join orange in any st. (Sl st in next st, ch 3, skip 1 st) 8 times, join. (8 ch-3 sps)

Rnd 4: In each ch-3 sp, work (sc, hdc, 3 dc, hdc, sc). Sl st to the first sc. (8 petals, 56 sts)

The large flower measures 2.75 in (7.0 cm) across.

Medium Flower (make 1)

Rnds 1–3: Work as for the Large Flower. (8 ch-3 sps)

Rnd 4: In each ch-3 sp, work (sc, hdc, 2 dc, hdc, sc). Join. (8 petals, 48 sts)

The medium flower measures 2.25 in (5.7 cm) across.

Small Flower (make 1)

Rnd 1: With brown, make a magic ring, work 8 sc, join. Fasten off brown. (8)

Rnd 2: Join orange. (Sl st in next st, ch 2) 8 times, join. (8 ch-2 sps)

Rnd 3: In each ch-2 sp, work (sc, hdc, dc, hdc, sc). Join. (8 petals, 40 sts)

The small flower measures 1.75 in (4.4 cm) across.

On every flower, leave a 10 in (25.4 cm) orange tail for sewing.

Stems and Leaves

Use the 4.0 mm hook and green. A sl st chain gives about 6 sts per inch.

Main stem (make 1): Ch 34, sl st in the back bump of the 2nd ch from the hook and in each ch across. (33 sl st, 5.5 in / 14.0 cm)

Branch stems (make 2): Ch 13, sl st in the back bump of the 2nd ch from the hook and in each ch across. (12 sl st, 2 in / 5.1 cm)

Leaf (make 2): Ch 9. Starting in the 2nd ch from the hook, work sc, hdc, 3 dc, hdc, sc (7 sts). Work 3 sc in the last ch. Rotate and work along the other side of the chain: sc, hdc, 3 dc, hdc, sc (7 sts). Sl st to the first sc. (17 sts)

Each leaf is about 1.75 in (4.4 cm) long and 0.75 in (1.9 cm) wide. For a center vein, surface sl st up the middle with green.

Assembly

Flatten the body so the slot is centered on the front and the side-seam marker sits at one edge.

  1. Main stem: Pin it in a gentle curve, from 0.75 in (1.9 cm) above the slot up to 1.75 in (4.4 cm) below the top band.
  2. Branches: Pin one branch angling right from the middle of the main stem. Pin the other angling left from a point lower down.
  3. Leaves: Pin one leaf on the left of the main stem, between the branches. Pin the other on the right, near the bottom of the stem.
  4. Flowers: Pin the large flower at the top of the main stem, the medium flower at the end of the right branch and the small flower at the end of the left branch.
  5. Sew: Whipstitch the stems and leaves with green. Sew each flower down with orange around its center and between the petals. Sew through the front layer only, with one hand inside to keep the back layer clear.

There are 8 in (20.3 cm) of cream fabric between the slot and the top band, so the bouquet fits without crowding either edge.

Border

The border is the rust top band plus a firm edging around the slot. Its gauge is the same as the body: 16 sc and 18 rounds = 4 in (10.2 cm).

Top Band

Rnds 59–62: Change to rust. Ch 1, turn, sc in each st around, join. (48 per round: 24 across the front and 24 across the back when flattened)

The tube has no corners. The side folds are ordinary stitches, so nothing is added there. Fasten off after Rnd 62.

Why the math works: The band keeps the same 48 sts as the body, so it doesn’t flare or pull in. Four rounds at 4.5 rounds per inch add 0.9 in (2.3 cm), which brings the wall to 12 in (30.5 cm).

Slot Edging

Rnd 1: With the 5.0 mm hook, join rust at one lower corner of the slot. Work 1 sc in each of the 16 unworked sts along the bottom and 4 sc up the side (1 per row end). Then work 1 sc in each of the 16 free ch loops along the top and 4 sc down the other side, and join. (16 + 4 + 16 + 4 = 40)

Rnd 2: Sl st loosely in each st around. (40)

Fasten off and weave in the ends. The top and bottom each keep their 16 sts, so the slot stays 4 in (10.2 cm) wide. One sc per row end matches the 4 rows of height, so the ends round off without buckling.

Attach the Hanger

Thread the strap through the covered ring and fold the strap in half. Center the two ends on the inside back of the top band, 0.5 in (1.3 cm) below the rim, so 1.5 in (3.8 cm) of strap shows above the rim. Whipstitch both ends firmly with the rust tail, sewing through the band only.

Final Blocking

  1. Weave in all ends on the inside of the tube.
  2. Mist the body lightly with water, or steam it from above without letting the iron touch the yarn.
  3. Lay it flat with the slot centered on the front.
  4. Pat it to 6 in (15.2 cm) wide and 13.8 in (35.1 cm) tall.
  5. Shape each flower’s petals into rounded curves with your fingers.
  6. Pin the leaf tips to points.
  7. Let it dry completely before hanging.

Final Quality-Control Checklist

  • The base is round and flows smoothly into the wall.
  • Every body round has 48 sts.
  • The rust stripe is 3 rounds and the top band is 4 rounds.
  • The slot is 4 in (10.2 cm) wide and centered on the front.
  • The slot edging has 40 sts and lies flat.
  • The strap is sewn inside the back and can’t be seen from the front.
  • The ring is fully covered.
  • The flowers and leaves are sewn through the front layer only.
  • The finished size is 6 in (15.2 cm) x 13.8 in (35.1 cm).

Troubleshooting

Base ruffles: Tension is loose or the increases are off. Recount them and try a smaller hook.

Base cups too much: Tension is too tight. Go up half a hook size for Rnds 1–8.

Seam drifts on a diagonal: A turn was missed. Ch 1 and turn at the start of every round.

Slot is off-center: Make sure Row 18 left exactly 16 sts unworked, centered on the front.

Slot gapes or puckers: Recount the edging. Each side needs exactly 4 sc.

Bottom stretches out of shape: Use cotton rather than acrylic, and keep your tension firm.

Flowers curl: Block them flat before sewing them on.

Care

Hand wash in cool water with mild soap and lay flat to dry. Reshape the flowers while they are damp.

Crocheted tissue holder with cream and orange stripes decorated with three sunflowers, hanging on kitchen cabinetry.

Final Notes

The measurement chain is short. The 3.6 in (9.1 cm) base ends at 48 sts, which gives a 12 in (30.5 cm) circumference and a 6 in (15.2 cm) flat width. Rnds 9–58 build 11.1 in (28.2 cm) of wall, with a 4 in (10.2 cm) slot made in Rows 18–21. Four rust rounds add 0.9 in (2.3 cm), for a 12 in (30.5 cm) wall and a 13.8 in (35.1 cm) body. The strap and ring bring the total length to 18.3 in (46.5 cm).

Hit the base checkpoint and keep every round at 48 sts, and the rest will follow.

Happy crocheting!

Leave a Comment