The Frosted Fan Teardrop is a light, lacy Christmas ornament made in cotton thread. A pale blue center of stacked fans and leaf petals sits inside a cream net. Trefoil picots trim the outer edge, and a small gold cap with a hanging loop finishes the top.
The colors are soft and wintry: icy blue, warm cream and a touch of metallic gold. The look is close to classic doily lace, but the ornament is small enough to finish in one evening.
The pattern uses US crochet terms. The finished ornament measures about 4 in (10.2 cm) wide and 5.25 in (13.3 cm) tall to the top of the cap. The hanging loop adds about 1 in (2.5 cm), so the total height is 6.25 in (15.9 cm).
You build the ornament in three stages. First, work the blue center in turned rows from the bottom up. Next, work the cream net in rounds all the way around it. Last, gather the top into a gold band and add the hanging loop.
Finished Size and Construction
- Finished size: 4 in (10.2 cm) wide × 5.25 in (13.3 cm) tall, plus a 1 in (2.5 cm) loop
- Skill level: Intermediate
- Terminology: US crochet terms
- Thread weight: Size 10 cotton crochet thread (Lace, weight 0)
- Hook: 1.75 mm steel hook
- Number of pieces: 1 (a single ornament)
- Layout: One teardrop motif
- Size of the blue center: 3 in (7.6 cm) wide × 3.25 in (8.3 cm) tall
- Size before the border: 3 in × 3.25 in (7.6 × 8.3 cm). This is the blue center.
- Border depth: about 0.5 in (1.3 cm) at each side, more at the top where the net gathers into the cap
Materials
Use a tightly twisted, mercerized cotton thread so the arches and picots keep their shape after blocking. The gold should be a metallic crochet thread of the same thickness as the cotton.
- Light blue: 6 g / 20 m
- Cream: 8 g / 26 m
- Gold metallic: 2 g / 7 m
These quantities include a margin of about 25% for your gauge swatch and weaving in ends.
Tools:
– 1.75 mm steel crochet hook
– Fine tapestry needle
– Small scissors
– Blocking foam and rustproof pins
– Spray starch or fabric stiffener
– Ruler or tape measure
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- tr: treble crochet
- sp(s): space(s)
- tch: turning chain
- st(s): stitch(es)
Special stitch: trefoil picot (tpc). Work [ch 3, sl st in the sc just made] 3 times. This makes three small loops on one stitch.
Gauge and Checkpoints
Gauge is not critical for an ornament. However, the net rounds are sized to fit the blue center, so check your work as you go. Before starting the whole ornament, work Rows 1 and 2 of the blue center as a test piece.
- After Row 2: the fan measures about 1.25 in (3.2 cm) across the flat bottom edge and 0.75 in (1.9 cm) tall.
- After Row 4: about 3 in (7.6 cm) wide × 1.5 in (3.8 cm) tall
- After Row 11 (blue center done): 3 in × 3.25 in (7.6 × 8.3 cm)
- After cream Round 1: 3.25 in × 3.75 in (8.3 × 9.5 cm)
- After cream Round 2: 3.5 in × 4.25 in (8.9 × 10.8 cm)
- After cream Round 3: 3.75 in × 4.75 in (9.5 × 12.1 cm)
- Finished, blocked: 4 in × 5.25 in (10.2 × 13.3 cm), plus the loop
If your test piece is too big, change to a 1.5 mm hook. If it is too small, change to a 2 mm hook. If you are within 0.125 in (0.3 cm), keep your hook; blocking will even it out.

Blue Center
Work in turned rows from the bottom up. Stitches radiate from a small ring at the bottom center.
Row 1 (RS): With blue, ch 4, sl st in the first ch to form a ring. Ch 3 (counts as dc), 8 dc in the ring. Turn. (9 dc)
This makes a half-circle fan. The flat edge is the bottom of the ornament.
Row 2: Ch 4 (counts as dc + ch 1), [dc in next dc, ch 1] 7 times, dc in top of tch. Turn. (9 dc, 8 ch-1 sps)
Row 3: Ch 1, sc in first dc, [ch 5, skip next dc, sc in next dc] 4 times. Turn. (5 sc, 4 ch-5 arches)
The sc land on dc 1, 3, 5, 7 and 9, so the arches spread evenly around the semicircle.
Row 4: Ch 1, sc in first sc, [9 dc in next ch-5 arch, sc in next sc] 4 times. Turn. (4 fans of 9 dc + 5 sc = 41 sts)
This is the wide, scalloped base tier. Checkpoint: about 3 in × 1.5 in (7.6 × 3.8 cm).
Row 5: Sl st in first sc and in each of the next 5 dc. You are now in the center (5th) dc of the first fan. Ch 1, sc in the same dc, [ch 6, sc in 5th dc of next fan] 3 times. Turn. (4 sc, 3 ch-6 arches)
Row 6: Ch 1, sc in first sc, [(2 dc, 3 tr, 2 dc) in next ch-6 arch, sc in next sc] 3 times. Turn. (3 petals of 7 sts + 4 sc = 25 sts)
The tr in the middle of each group give the petals their pointed leaf shape.
Row 7: Sl st in first sc, in the next 2 dc, in the next tr and in the center tr. That is 5 sl sts. Ch 1, sc in the same tr, [ch 7, sc in center tr of next petal] 2 times. Turn. (3 sc, 2 ch-7 arches)
Row 8: Ch 1, sc in first sc, [9 dc in next ch-7 arch, sc in next sc] 2 times. Turn. (2 fans of 9 dc + 3 sc = 21 sts)
Row 9: Sl st in first sc and in each of the next 5 dc. Ch 1, sc in the same dc, ch 8, sc in 5th dc of next fan. Turn. (2 sc, 1 ch-8 arch)
Row 10: Ch 1, sc in first sc, 11 dc in ch-8 arch, sc in last sc. Turn. (11 dc + 2 sc = 13 sts)
Row 11 (tip): Sl st in first sc and in each of the next 6 dc. You are now in the center (6th) dc. Ch 6, sl st in the same dc to make the tip loop. Fasten off and weave in the ends.
Checkpoint: the blue center measures 3 in (7.6 cm) wide × 3.25 in (8.3 cm) tall and comes to a clear point at the top. Before starting the border, pin it flat and steam it lightly.
Border: Cream Net, Picot Edge and Gold Cap
Anchor points for Round 1
Round 1 connects to 24 anchor points around the blue center:
- 1 at the tip loop
- 1 at the bottom center, worked around the Row 1 ring
- 11 down each side
The 11 anchors on each side, from top to bottom, are:
- The outer dc of the Row 10 fan
- The end sc of Row 10
- The center dc of that side’s Row 8 fan
- The outer dc of that side’s Row 8 fan
- The end sc of Row 8
- The center tr of that side’s Row 6 petal
- The end sc of Row 6
- The 2nd dc of that side’s Row 4 fan, counting from the top
- The 5th dc of that fan
- The 8th dc of that fan
- The end sc of Row 4
Border gauge
On the finished edge, 9 sc measure about 0.6 in (1.5 cm). Each of the 24 edge sections takes 9 sc, so the outline measures about 14.4 in (36.6 cm). This matches the perimeter of a 4 × 5.25 in (10.2 × 13.3 cm) teardrop.
Cream net rounds
Round 1: Join cream with a sl st in the tip loop. Ch 1, sc in tip loop. Going down the right side, around the bottom and up the left side: [ch 5, sc in next anchor] 23 times, ch 5, sl st in first sc. (24 sc, 24 ch-5 loops; 12 loops per side)
Round 2: Sl st in next 3 ch (center of the first loop). Ch 1, sc in the same loop, [ch 7, sc in next loop] 23 times, ch 7, sl st in first sc. (24 sc, 24 ch-7 loops; 12 per side)
Round 3: Sl st in next 4 ch. Ch 1, sc in the same loop, [ch 8, sc in next loop] 23 times, ch 8, sl st in first sc. (24 sc, 24 ch-8 loops; 12 per side)
Each round’s loops sit over the centers of the loops below, which creates the diamond pattern. Sc 24 of Round 3 sits right above the tip. Sc 12 sits right above the bottom center. Loops 24 and 1 to 11 run down the right side, and loops 12 to 23 run up the left side.
Picot edge
Round 4: Ch 1, sc in first sc, (4 sc, tpc, 4 sc) in next loop, [sc in next sc, (4 sc, tpc, 4 sc) in next loop] 21 times. Then [sc in next sc, 8 sc in next loop] 2 times. These last 2 loops are 23 and 24, the two that meet at the tip, and they get no picot. Sl st in first sc.
Count: 216 sc and 22 tpc. Each side has 108 sc (12 sections × 9 sc) and 11 tpc. Do not fasten off yet. Check that the trefoils are evenly spaced, then fasten off.
Why the math works
Every round keeps exactly 24 loops, 12 per side, so the net grows evenly without ruffling or cupping. The loops get longer each round (ch 5, ch 7, ch 8), which widens the net by about 0.25 in (0.6 cm) per round on each side. Round 4 puts 8 sc in each ch-8 loop plus 1 sc in each joining sc, which is 9 sc per section. That is one sc per chain plus one per joint, so the edge lies flat. The two plain loops at the tip are left smooth so they can be gathered into the cap.
Gold cap and hanging loop
Round 1: About 0.5 in (1.3 cm) below the tip, pinch together the two plain top loops and the tip sc. Join gold around this bundle. Ch 1, work 10 sc around the bundle, enclosing all the cream strands. Sl st in first sc. (10 sc)
Rounds 2–4: Ch 1, sc in back loop of each sc around, sl st in first sc. (10 sc each round)
Working in the back loops gives the band its ribbed look. The finished band is about 0.4 in (1.0 cm) tall.
Loop: Ch 24, sl st in the 6th sc of the band, on the opposite side. Work 30 sc over the ch-24 so the chain is completely covered, then sl st at the base. Fasten off and weave in the ends inside the band.
Final Blocking
- Draw a teardrop 4 in (10.2 cm) wide × 5.25 in (13.3 cm) tall on paper. Place it under plastic wrap on your blocking foam.
- Wet the ornament, or mist it well with spray starch.
- Pin the blue center first. Open each fan and point each petal.
- Pin the Round 3 sc so the diamond openings are even.
- Pin out each trefoil picot, using one pin per center loop.
- Shape the cap and loop so they are straight and centered.
- Let it dry completely, which takes 12–24 hours. Starch again if you want a stiffer ornament.
Final Quality-Control Checklist
- The blue center has 4 base fans, 3 petals, 2 fans, 1 top fan and a tip loop.
- Rounds 1–3 each have 24 loops, 12 per side.
- Round 4 has 216 sc and 22 trefoil picots, 11 per side.
- The two plain loops are at the tip, under the cap.
- The gold band has 4 rounds of 10 sc, and the loop is fully covered.
- The ornament measures 4 × 5.25 in (10.2 × 13.3 cm), plus a 1 in (2.5 cm) loop.
- All ends are woven in invisibly.
Troubleshooting
- The base fan cups: Your Row 1 ring is too tight. Make the ring loosely, or add ch 1 to the ring.
- Petals lean sideways: Make sure you place the Row 7 sc in the center tr of each petal, not the first tr.
- The net ruffles: Your chains are too loose. Work Rounds 2–3 with 1 chain fewer in each loop, then check the size again.
- The net pulls the blue center inward: Check that you have 24 anchors, then add 1 chain to each Round 1 loop.
- Picots collapse: Starch them again and pin each loop open until dry.
- The cap slides: Work Round 1 of the cap more tightly, or sew the band to the cream strands with a few stitches.
Care
Hand-wash in cool water with mild soap. Roll in a towel, then reshape and starch again as described in Final Blocking. Store flat or hanging, away from damp and direct sun.

Final Notes
Here is the full measurement chain:
- Rows 1–2 make a 1.25 in (3.2 cm) fan.
- Row 4 reaches 3 in × 1.5 in (7.6 × 3.8 cm).
- The finished blue center measures 3 in × 3.25 in (7.6 × 8.3 cm).
- The three net rounds bring it to 3.75 in × 4.75 in (9.5 × 12.1 cm).
- The picot edge and gold cap finish the ornament at 4 in × 5.25 in (10.2 × 13.3 cm), plus a 1 in (2.5 cm) loop.
Check each of these numbers as you go and the teardrop will come out right. Make one in every colorway you like and hang them together on your tree.
Happy crocheting!