Evergreen Vein Leaf Strand Curtain Crochet Pattern

This curtain is made from small openwork leaves that hang in long vertical strands. Each leaf has a pointed almond shape, a chain-textured center spine, four pairs of veins that angle up from the spine, and a firm single crochet outline. A plain chain loop at the top and bottom tips lets the leaves link together like a chain.

The palette uses two colors, deep forest green and soft cream. The strands alternate green and cream across the rod. Natural wooden beads sit between the leaves, and each strand ends in a full tassel that matches its leaves.

This pattern uses US crochet terms. One finished leaf measures 4 in (10.2 cm) long and 2 in (5.1 cm) wide, not counting the loops. The finished curtain is about 30 in (76.2 cm) wide and 55 in (139.7 cm) long, measured from the top of the hanging loops to the ends of the tassels.

Each leaf is worked in one piece. A foundation chain forms the bottom loop and the spine. One round of tall stitches and chain spaces builds the veins, and a single crochet border closes the outline. You then link 7 leaves into a strand with beaded connectors and add a hanging loop and a tassel. Make 8 strands in all.

Finished Size and Construction

  • Finished curtain: about 30 in (76.2 cm) wide x 55 in (139.7 cm) long
  • Skill level: Easy to Intermediate
  • Terminology: US crochet terms
  • Yarn weight: worsted weight (#4) cotton
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 56 leaves (28 green, 28 cream) and 8 tassels
  • Layout: 8 strands of 7 leaves each, alternating green and cream, spaced about 4 in (10.2 cm) apart from center to center
  • Piece size (one leaf, with border): 4 in (10.2 cm) x 2 in (5.1 cm), plus a 0.75 in (1.9 cm) chain loop at each tip
  • Leaf size before border: 3.5 in (8.9 cm) x 1.5 in (3.8 cm)
  • Border depth: 0.25 in (0.6 cm) on every edge
  • Strand length: about 55 in (139.7 cm), including the tassel

Materials

Choose a smooth, firmly twisted cotton. A plied yarn gives the chains and posts a rope-like texture. Avoid fuzzy yarns, because they fill in the open spaces between the veins.

  • Forest green worsted cotton: 150 g, about 240 m (262 yd)
  • Cream worsted cotton: 150 g, about 240 m (262 yd)

Each color covers 28 leaves (about 126 m), 4 tassels (about 30 m), and the connectors and hanging loops for 4 strands (about 17 m). That comes to about 173 m per color. The listed quantities include extra yarn for swatching, tails, and a spare leaf.

Tools and notions:

  • 4.0 mm (G-6) crochet hook
  • 56 natural wooden beads, 12 mm, with holes of at least 5 mm (7 per strand)
  • Yarn needle and scissors
  • Stiff card, 4.5 in (11.4 cm) tall, for the tassels
  • Blocking mat, rust-proof pins, and a spray bottle
  • Measuring tape
  • Curtain rod, at least 32 in (81.3 cm) long and no more than 1.25 in (3.2 cm) in diameter

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • dc: double crochet
  • tr: treble crochet (yarn over twice, insert hook, yarn over and pull up a loop, then [yarn over, pull through 2 loops] 3 times)
  • sk: skip
  • sp(s): space(s)
  • st(s): stitch(es)

Special technique, Bead Lock: Drop the loop from your hook. Insert the hook through the hole of a bead, pick up the dropped loop, and pull it back through the bead so the bead sits on the loop. Ch 1 to lock the bead in place.

Gauge and Checkpoints

Gauge: 18 sc and 20 rows = 4 in (10.2 cm) with a 4.0 mm hook. Your foundation chain should measure about 4.5 ch per inch.

Make one complete leaf first and check it at each stage:

  • After the foundation: the 17-ch spine measures about 3.75 in (9.5 cm), and the bottom loop lies flat as a small ring.
  • After Round 1: the leaf measures 3.5 in (8.9 cm) long and 1.5 in (3.8 cm) wide across the tr posts.
  • After the border: the leaf measures 4 in (10.2 cm) long and 2 in (5.1 cm) wide.
  • After one strand: the strand measures about 55 in (139.7 cm), tassel included.

If your leaf is too big, switch to a 3.75 mm (F-5) hook. If it’s too small or feels stiff, switch to a 4.5 mm (7) hook. Change the hook size, not the stitch counts, and use the same hook for all 56 leaves.

Cream crocheted diamond pendant with wooden beads and openwork lattice pattern on a marble surface.

Leaf Pattern

Make 28 leaves in green and 28 in cream. Work each leaf in a single color.

Foundation (bottom loop and spine):

Ch 8, sl st in the first ch to form a ring. This is the bottom loop.

Ch 17. This is the spine, extending straight out from the ring.

Checkpoint: 8 ch in the ring and 17 ch in the spine.

Round 1 (veins, worked down Side A and then up Side B):

Side A: Working into the top loops of the spine chain, sc in the 2nd ch from the hook (this is the leaf tip), ch 2, sk 2 ch, dc in next ch, ch 2, sk 2 ch, tr in next ch, ch 2, sk 2 ch, tr in next ch, ch 2, sk 2 ch, dc in next ch, ch 2, sk 2 ch, sc in last ch (next to the ring).

This uses all 16 workable chains. Chains 1, 4, 7, 10, 13, and 16 each hold one stitch, and the 10 skipped chains sit under the 5 ch-2 sps.

Base turn: Sl st around the bottom ring at its joining point.

Side B: Rotate the work and crochet into the free loops on the other side of the spine. Sc in the same ch as the last sc of Side A, ch 2, sk 2 ch, dc in next ch, ch 2, sk 2 ch, tr in next ch, ch 2, sk 2 ch, tr in next ch, ch 2, sk 2 ch, dc in next ch, ch 2, sk 2 ch, sc in the same ch as the first sc of Side A.

Top loop: Ch 8, sl st in the first sc of Side A to form the top loop. Don’t fasten off. Go straight on to the Border Round below.

Stitch count after Round 1: 12 sts (4 sc, 4 dc, 4 tr) and 10 ch-2 sps, or 6 sts and 5 ch-2 sps per side. You’ll also have 1 sl st at the base and the 8-ch top loop.

Each dc and tr forms one vein. The tr stitches sit at the widest point, so the outline curves out into an almond shape. The foundation chain stays visible between the stitch bases and forms the center spine.

Make All Pieces

Make 56 leaves in total:

  • Green: 28 leaves and 4 tassels
  • Cream: 28 leaves and 4 tassels

Sort finished leaves by color. Leave the last tail on each leaf about 4 in (10.2 cm) long until after blocking.

Layout grid (front view, rod at top):

Strand:  1  2  3  4  5  6  7  8
Leaf 1:  G  C  G  C  G  C  G  C
Leaf 2:  G  C  G  C  G  C  G  C
Leaf 3:  G  C  G  C  G  C  G  C
Leaf 4:  G  C  G  C  G  C  G  C
Leaf 5:  G  C  G  C  G  C  G  C
Leaf 6:  G  C  G  C  G  C  G  C
Leaf 7:  G  C  G  C  G  C  G  C
Tassel:  G  C  G  C  G  C  G  C

G = green, C = cream. Each strand uses only one color.

Joining

The leaves join tip to tip. Each connector links the bottom loop of one leaf to the top loop of the next, with a bead in the middle. Use yarn that matches the strand.

Connector (make 6 per strand):

  1. Join yarn with a sl st around the bottom loop of the upper leaf.
  2. Ch 3.
  3. Work a Bead Lock.
  4. Ch 3.
  5. Sl st around the top loop of the next leaf. Fasten off.

You’re joining loop to loop, not seaming stitch to stitch. Work the sl st around the whole 8-ch loop so the leaf hangs freely. Before you fasten off, check that every leaf faces the same way.

Tension: Keep the connector chains the same size as the chains in your leaves. Tight connectors twist the strand, and loose ones let the beads sag. Each connector should measure 1.5 in (3.8 cm) from loop to loop, bead included.

Tassel connector (make 1 per strand): Join yarn around the bottom loop of Leaf 7, ch 3, work a Bead Lock, then ch 3. Fasten off, leaving a 6 in (15.2 cm) tail.

Hanging loop (make 1 per strand): Join yarn around the top loop of Leaf 1, ch 20, then sl st around the same top loop. Fasten off. The loop is about 4.4 in (11.2 cm) around, so it fits a rod up to 1.25 in (3.2 cm) in diameter.

Tassels (make 8): Wrap yarn 30 times around the 4.5 in (11.4 cm) card. Tie a 9 in (22.9 cm) strand through the wraps at the top, then cut the wraps at the bottom. Wrap another strand around the bundle 0.5 in (1.3 cm) below the top, tie it, and hide the ends inside. Trim the tassel to 4 in (10.2 cm). Tie it to the connector tail and hide that tail in the tassel head.

Strand size checkpoint: Add up each part of the strand:

  • Hanging loop drop: 2 in (5.1 cm)
  • Top leaf loop: 0.75 in (1.9 cm)
  • 7 leaves: 28 in (71.1 cm)
  • 6 joins, each loop + connector + loop: 3 in (7.6 cm), so 18 in (45.7 cm) in total
  • Last bottom loop: 0.75 in (1.9 cm)
  • Tassel connector: 1.5 in (3.8 cm)
  • Tassel: 4 in (10.2 cm)

Total: 55 in (139.7 cm).

Border

The border goes around every leaf, worked right after Round 1 without fastening off. It closes the outline and gives the leaf its rope-like edge.

Border gauge: 4.5 sc per inch along the edge, the same as your sc gauge.

Border Round: Ch 1, sc in the same sc as the join. Work down Side A: 2 sc in next ch-2 sp, sc in dc, 2 sc in next ch-2 sp, sc in tr, 2 sc in next ch-2 sp, sc in tr, 2 sc in next ch-2 sp, sc in dc, 2 sc in next ch-2 sp, sc in last sc. Sl st around the bottom ring. Work up Side B the same way: sc in sc, 2 sc in next ch-2 sp, sc in dc, 2 sc in next ch-2 sp, sc in tr, 2 sc in next ch-2 sp, sc in tr, 2 sc in next ch-2 sp, sc in dc, 2 sc in next ch-2 sp, sc in last sc. Sl st in the first sc to join, then fasten off.

Count per side: (6 sc worked 1 per existing st) + (10 sc added, 2 in each of the 5 ch-2 sps) = 16 sc.

Round total: 32 sc (16 per side), plus 1 sl st at the base and 1 joining sl st. Don’t crochet into the top and bottom loops, so they stay open.

Why the math works: Each side edge is 6 stitch tops plus 5 ch-2 sps, which comes to about 3.5 in (8.9 cm) along the curve. At 4.5 sc per inch, that edge needs 15.75 sc, so 16 sc will lie flat without ruffling. The border adds 0.25 in (0.6 cm) to every edge, taking the leaf from 3.5 in x 1.5 in (8.9 cm x 3.8 cm) to 4 in x 2 in (10.2 cm x 5.1 cm).

Final Blocking

  1. Pin one leaf flat, right side up.
  2. Pin the two tips 4 in (10.2 cm) apart.
  3. Pin the widest point, at the tr posts, to 2 in (5.1 cm).
  4. Angle each vein slightly upward toward the tip to create the chevron look.
  5. Pin both loops open into round rings.
  6. Mist until damp, then let the leaf dry completely, at least 4 hours.
  7. Unpin, weave in the remaining tails, and trim them.
  8. After joining, hang each strand and mist it lightly. The weight of the beads and tassel straightens the strand as it dries.

Final Quality-Control Checklist

  • Every leaf measures 4 in x 2 in (10.2 cm x 5.1 cm), within 0.25 in (0.6 cm).
  • Each leaf has 4 veins per side: dc, tr, tr, dc.
  • Each side of the border has 16 sc.
  • The top and bottom loops are open 8-ch rings.
  • Each strand has 7 leaves in one color, 6 beaded connectors, 1 hanging loop, and 1 tassel.
  • All leaves face forward.
  • Each strand measures about 55 in (139.7 cm).
  • The strands alternate colors, starting with green on the left.
  • All tails are woven in.

Troubleshooting

The leaf cups: The border is too tight. Use a larger hook for the border, or check that you worked exactly 2 sc into each ch-2 sp.

The edge ruffles: Too many stitches went into a space. Recount so each side has 16 sc.

The spine twists: The foundation chain was twisted when you worked Side A. Keep all the back bumps of the chain facing the same way.

The veins lie flat: Dampen the leaf again and pin each vein angled up toward the tip.

The strands are different lengths: Measure each connector and redo any that aren’t 1.5 in (3.8 cm).

The bead won’t slide over the hook: Use a bead with a hole of 5 mm or larger.

Care

Hand wash in cool water with mild soap, roll each strand in a towel to press out the water, and hang it to dry. Don’t leave the wooden beads soaking, and never use a dryer.

Crocheted leaf-shaped window hangings in cream and green alternate colors with wooden bead spacers and tassels, displayed on patio doors.

Final Notes

The whole curtain depends on one small leaf, so the measurements build in a simple chain. A 17-ch spine of about 3.75 in (9.5 cm) makes a 3.5 in x 1.5 in (8.9 cm x 3.8 cm) leaf after Round 1. The 16-sc border per side brings each leaf to 4 in x 2 in (10.2 cm x 5.1 cm). Seven leaves, plus connectors, a hanging loop, and a tassel, make a 55 in (139.7 cm) strand. Eight strands spaced 4 in (10.2 cm) apart fill a curtain 30 in (76.2 cm) wide.

If your first leaf matches these measurements, every strand will match too. Make one leaf, measure it, then settle in for a relaxing, repetitive project.

Happy crocheting!

Leave a Comment