The Sunny Meadow Flower Curtain turns a plain window into a hanging garden. A bright yellow filet header with scalloped fans holds 25 slender chain strands. Leaves are worked right into each strand, and pastel flowers and little bells are sewn on.
The palette is cheerful and soft. Sunshine yellow carries the structure. The flowers come in pink, coral red, sky blue, mint, lavender, cream and forest green, and every one has a yellow center. Small bells in light blue, cream and peach hang at the ends of every other strand.
This pattern uses US crochet terms. The finished curtain measures 36 in (91.4 cm) wide and 45.25 in (114.9 cm) long, not counting the hanging loops.
Construction is simple and modular. You crochet the header flat in rows and make the flowers and bells separately. Then you chain the strands directly off the header, working leaves as you go, and sew on the flowers and bells. A final top edging adds the hanging loops.
Finished Size and Construction
- Finished size: 36 in (91.4 cm) wide x 45.25 in (114.9 cm) long, plus 1.5 in (3.8 cm) hanging loops
- Skill level: Easy+ (repetitive, but involves many small pieces)
- Terminology: US crochet terms
- Yarn weight: Worsted (#4) cotton
- Hooks: 5.0 mm (H-8) for the header and strands; 4.0 mm (G-6) for flowers and bells
- Number of pieces: 1 header, 25 strands worked off the header, 125 flowers, 12 bells
- Layout: 25 strands across, alternating Strand A (13) and Strand B (12)
- Header size before border: 36 in x 5 in (91.4 cm x 12.7 cm)
- Border depth: 0.25 in (0.6 cm), plus hanging loops of 1.5 in (3.8 cm)
- Strand length: 40 in (101.6 cm) below the fan tips
Materials
Use a smooth, mercerized or matte 100% cotton worsted yarn, at about 1.6 m per gram. Cotton keeps the mesh crisp and holds up to window light and washing. Avoid fuzzy yarns, because they blur the filet spaces.
- Sunshine yellow: 250 g / 400 m (header, strands, leaves, flower centers, border)
- Pink: 40 g / 64 m
- Coral red: 40 g / 64 m
- Sky blue: 55 g / 88 m (flowers and bells)
- Mint: 40 g / 64 m
- Lavender: 40 g / 64 m
- Cream: 55 g / 88 m (flowers and bells)
- Forest green: 40 g / 64 m
- Peach: 15 g / 24 m (bells only)
Tools: 5.0 mm (H-8) and 4.0 mm (G-6) hooks, tapestry needle, 30+ locking stitch markers, small amount of fiberfill (optional, for bells), blocking mats, rust-proof pins, spray bottle, and measuring tape.
All quantities include roughly a 15% margin for swatching and tails.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- MR – magic ring
- rep – repeat
Special stitches
- Mesh: ch 1, sk 1 st, dc in next st.
- Fan: (tr, [ch 1, tr] 6 times) all in the same st. That makes 7 tr and 6 ch-1 sps, for 13 sts.
- Leaf: ch 6, sl st in 2nd ch from hook, sc in next ch, hdc in next ch, sc in next ch, sl st in last ch. The leaf folds back against the strand, and its last sl st lands at the base where you started it.
Gauge and Checkpoints
Header gauge (5.0 mm hook): 8 meshes and 8 mesh rows = 4 in (10.2 cm). That works out to 2 meshes per inch and 4 sts per inch, with each dc row 0.5 in (1.3 cm) tall.
Chain gauge (5.0 mm hook): 3 ch = 1 in (2.5 cm), so 24 ch = 8 in (20.3 cm).
Test pieces first. Before you start the header, make one 8-mesh swatch, one flower and one bell.
- Flower (4.0 mm): 1.75 in (4.4 cm) across
- Bell (4.0 mm): 1.5 in (3.8 cm) tall and 1.75 in (4.4 cm) across the ruffle
Checkpoints:
- After Row 1, the header is 36 in (91.4 cm) wide.
- After Row 8, it is 3.75 in (9.5 cm) tall.
- After Row 9, it is 4 in (10.2 cm) tall.
- After Row 10, it is 5 in (12.7 cm) tall at the fan tips.
If your gauge is off: if the swatch is too big, go down half a hook size. If it is too small, go up half a size. Chain gauge drifts more than stitch gauge, so measure a 24-ch test length before you make the strands.

Header
Work with the 5.0 mm hook and yellow.
Foundation: ch 146.
Row 1: sc in 2nd ch from hook and in each ch across, turn. (145 sc)
Row 2: ch 4 (counts as dc + ch 1), sk next sc, dc in next sc. Work ch 1, sk next sc, dc in next sc across, turn. (73 dc + 72 ch-1 sps = 145 sts; 72 meshes)
Rows 3–8: ch 4 (counts as dc + ch 1), dc in next dc. Work ch 1, dc in next dc across, placing the last dc in the 3rd ch of the turning ch-4, turn. (145 sts; 72 meshes per row)
This gives you 7 mesh rows. The header should now measure 3.75 in (9.5 cm) tall.
Row 9: ch 1, then sc in each dc and each ch-1 sp across, ending with sc in the 3rd ch of the turning ch-4, turn. (73 sc in dc + 72 sc in spaces = 145 sc)
The header is now 4 in (10.2 cm) tall.
Row 10 (scallop fans): ch 1, sc in first sc. Then work sk 5 sc, Fan in next sc, sk 5 sc, sc in next sc. Rep from * 11 more times. Do not turn, and fasten off. (13 anchor sc + 12 Fans x 13 sts = 169 sts)
Each repeat uses 12 sts, and 1 + (12 x 12) = 145, so the fans fit exactly. The anchor sc sit at sts 1, 13, 25, and so on up to 145, and the fans sit at sts 7, 19, and so on up to 139.
The header now measures 36 x 5 in (91.4 x 12.7 cm).
Flowers
Work with the 4.0 mm hook.
Rnd 1 (yellow): MR, ch 1, 10 sc in ring, sl st to first sc. Fasten off. (10 sc)
Rnd 2 (petal color): join with sl st in any sc. Work (hdc, 3 dc, hdc) in next sc, sl st in next sc 5 times. The last sl st lands in the joining st. (5 petals: 25 petal sts + 5 sl st = 30 sts)
Fasten off with an 8 in (20.3 cm) tail of the petal color for sewing. Weave in the yellow tails.
Bells
Work with the 4.0 mm hook, in continuous rounds.
- Rnd 1: MR, 6 sc. (6)
- Rnd 2: 2 sc in each st. (12)
- Rnds 3–5: sc in each st. (12)
- Rnd 6: sc in next st, 2 sc in next st 6 times. (18)
- Rnd 7: sc in each st. (18)
- Rnd 8 (ruffle): 5 dc in next st, sk next st, sl st in next st 6 times. (6 scallops x 6 sts = 36 sts)
Fasten off and weave in. If you want the bell to hold its shape better, add a pinch of fiberfill to the dome. Leave the starting tail at the top of the bell for sewing.
Make All Pieces
- Flowers (125 total): 18 each in pink, coral red, sky blue, mint, lavender and cream, plus 17 in forest green
- Bells (12 total): 4 sky blue, 4 cream and 4 peach
- Leaves (113 total): worked into the strands in yellow (65 on Strand A, 48 on Strand B)
Strand schedule. Positions are given in chains, counted from fan-tip level.
- Strand A (13 strands, from the anchor sc): leaves at 12, 36, 60, 84 and 108. Flowers at 24, 48, 72 and 96, plus an end flower at 120.
- Strand B (12 strands, from the fan centers): flowers at 12, 36, 60, 84 and 108. Leaves at 24, 48, 72 and 96, plus a bell at 120.
Layout grid. The grid shows the first 5 strands, numbered left to right. F = flower, L = leaf, Bell = bell.
ch | S1 A | S2 B | S3 A | S4 B | S5 A
-----+------+------+------+------+-----
12 | L | F | L | F | L
24 | F | L | F | L | F
36 | L | F | L | F | L
48 | F | L | F | L | F
60 | L | F | L | F | L
72 | F | L | F | L | F
84 | L | F | L | F | L
96 | F | L | F | L | F
108 | L | F | L | F | L
120 | F | Bell | F | Bell | F
Continue the A-B alternation across all 25 strands.
Flower colors: assign colors in the order pink, coral red, sky blue, mint, lavender, cream, forest green. Run that sequence continuously, top to bottom within each strand and then on to the next strand.
There are 125 flowers, which is 17 full cycles of 7 (119 flowers) plus 6 more. That gives 18 of each of the first six colors and 17 forest green.
Bell colors: on the B strands, use blue, cream, peach, blue, cream, peach, and so on across.
Joining
The strands are chained directly off the header, so you never have to sew them on. Hold the header with the fans pointing down and the right side facing you. Use the 5.0 mm hook and yellow.
Strand A (at each of the 13 anchor sc):
- Join with sl st in the anchor sc.
- Ch 3. This is the “drop” that brings the strand down to fan-tip level, which is 1 in (2.5 cm) below the anchor sc.
- Continue chaining, counting from 1 again after the drop, and work a Leaf after ch 12, 36, 60, 84 and 108.
- At each flower position (24, 48, 72 and 96), place a marker in that ch.
- Stop at ch 120 and fasten off with a 10 in (25.4 cm) tail.
Strand B (at each of the 12 fans):
- Join with sl st in the top of the center (4th) tr of the fan.
- Chain, working a Leaf after ch 24, 48, 72 and 96.
- Place markers at 12, 36, 60, 84 and 108.
- Stop at ch 120 and fasten off with a 10 in (25.4 cm) tail.
Stitch-to-stitch logic: every strand starts in exactly one header stitch. That gives 13 strands from the anchor sc plus 12 from the fan centers, for 25 strands spaced every 6 header sts, or 1.5 in (3.8 cm) apart.
Tension advice: chain loosely and evenly, and keep chain gauge at 3 ch per inch. Tight chains will make the strands shorter and the curtain uneven. Check each strand against a 40 in (101.6 cm) tape before you fasten off.
Attaching flowers: center each flower over its marker. Sew through the yellow center into the chain 3–4 times, then knot on the back.
Attaching bells: thread the bell’s top tail up through the end chain. Sew it securely so the bell hangs straight, then weave the strand tail down into the bell.
Size checkpoint: the header is 36 x 5 in (91.4 x 12.7 cm), and every strand ends 40 in (101.6 cm) below the fan tips.
Border
The border is a top band with hanging loops, worked along the free foundation edge. Use the 5.0 mm hook and yellow.
Border gauge: 4 sc per inch along the top and 4 sc per inch vertically along the sides.
Rnd 1 (sides and top): with the right side facing, join at the lower right corner, at the Row 9 sc.
- Right side: work 16 sc up the side edge. That is 1 sc in the end of Row 9, 2 sc around each of the 7 dc row ends (14 sc), and 1 sc in the end of Row 1. (16 sc)
- Top: sc in each remaining loop of the foundation ch. (145 sc) The first and last of these sc are the corner sts.
- Left side: work 16 sc down to the Row 9 sc, the same way as the right side. (16 sc)
Do not turn, and sl st back across the top. If sl sting across is awkward, you can fasten off and rejoin at the top right corner instead.
Rnd 1 total: 16 + 145 + 16 = 177 sc. The corners are counted once, inside the 145 top sts.
Row 2 (hanging loops, top edge only): working in the Rnd 1 top sc, ch 1, sc in first sc, ch 10, sl st in same sc. Then work sc in next 12 sc, ch 10, sl st in last sc made 12 times. (145 sc + 13 loops) Fasten off.
Why the math works: each side’s 16 sc match the row ends, at 4 sc per inch over 4 in (10.2 cm), so the sides lie flat.
The top row has 1 sc per foundation chain. The loops fall at sts 1, 13, 25, and so on up to 145, since 1 + (12 x 12) = 145. Those are the same positions as the anchor sc in Row 10. Each hanging loop therefore sits directly above a Strand A, so the weight of the strands pulls straight down without twisting the header.
Final Blocking
- Weave in all remaining ends before blocking.
- Lay the header on blocking mats and pin it to 36 x 5.25 in (91.4 x 13.3 cm).
- Pin each fan tip to open the scallops evenly.
- Spray with water until damp, then press the mesh squares into straight lines.
- Let the header dry completely, which usually takes 12–24 hours.
- Hang the curtain from the rod and lightly spray the strands. Let them dry hanging so the chains straighten.
- Flatten the petals and leaves with your fingers while they are damp.
Final Quality-Control Checklist
- The header measures 36 in (91.4 cm) wide with 72 even meshes.
- There are 12 fans and 13 anchor sc, and each fan has 7 tr.
- All 25 strands hang 40 in (101.6 cm) below the fan tips.
- There are 125 flowers (18/18/18/18/18/18/17) and 12 bells (4/4/4).
- Leaves alternate with flowers along each strand.
- The 13 hanging loops line up with the Strand A anchors.
- Every sewn ornament is secure, with no loose knots showing on the front.
Troubleshooting
- The header is wider at the top than the bottom: your foundation chain is too loose. Rework it with a smaller hook.
- The mesh is leaning: you may be missing the turning ch-4 dc. Count to 73 dc per row.
- The fans are cupping: use a looser tension on the tr, or block the fans flat with pins.
- The strand lengths vary: your chain tension is drifting. Measure every 24 ch against 8 in (20.3 cm).
- The flowers are curling: pin them flat and steam-block them before sewing.
- The bells are collapsing: add more fiberfill, or work Rnds 3–5 more tightly.
Care
Hand wash in cool water with mild soap, then gently press out the water in a towel. Lay the header flat to dry and let the strands dry hanging. Do not tumble dry, because the strands tangle easily.

Final Notes
Everything in this curtain depends on one chain of measurements:
- 4 sts per inch makes the 145-st header 36 in (91.4 cm) wide.
- Twelve 12-st fan repeats set 25 strand anchors 1.5 in (3.8 cm) apart.
- 3 ch per inch makes each 120-ch strand 40 in (101.6 cm) long.
- The 5.25 in (13.3 cm) bordered header brings the full curtain to 45.25 in (114.9 cm).
Check gauge early, count your chains, and your window will bloom all year.
Happy crocheting!