Flutter Fan Butterfly Motif Crochet Pattern

This butterfly motif has two pairs of wings made from radiating fan stitches. The fans are worked in bright hot pink, and a blue chain-loop border with small scallops outlines every wing. A blue segmented body with two ball-tipped antennae sits in the center, so the finished piece looks like a little textured flower-petal butterfly.

The upper wings are mostly pink with a blue outline. The lower wings mirror them top-to-bottom in reverse proportions. Their pink fans are smaller, so the blue border takes up a larger share of each lower wing. The style is bold, graphic, and slightly retro. It works well as an appliqué, a card topper, or a stand-alone decoration.

The pattern uses US crochet terms. The finished motif measures about 6.25 in (15.9 cm) wide and 7 in (17.8 cm) tall, wing tip to wing tip. The antennae rise about 1.5 in (3.8 cm) above the body.

Construction is one single piece. First you work the blue body in short rows of back-loop single crochet, which creates the segmented ridges. Next you work the pink wings directly into the body’s row ends, one side at a time. Finally you work a two-round blue border around the whole outline, and you make the antennae during the last round.

Finished Size and Construction

  • Finished size: 6.25 in (15.9 cm) wide × 7 in (17.8 cm) tall, plus antennae of about 1.5 in (3.8 cm)
  • Skill level: Easy–Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4)
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 1 (single motif, no joining)
  • Layout: Central body; two wings per side (upper and lower), fully symmetrical
  • Body size: 0.75 in (1.9 cm) wide × 5 in (12.7 cm) long
  • Size before border: 4.75 in (12.1 cm) wide × 5.5 in (14.0 cm) tall
  • Border depth: about 0.75 in (1.9 cm) all around

Materials

Yarn: Use a smooth worsted-weight cotton or cotton blend. Cotton shows the fan stitches clearly and blocks flat. Acrylic also works, but the scallops will be softer. Avoid fuzzy or highly textured yarns, because they hide the stitch definition.

  • Blue (body, border, antennae): 15 g, about 25 m
  • Hot pink (wings): 10 g, about 17 m

These quantities include a margin of roughly 25% for your gauge swatch and tension differences.

Tools:

  • 5.0 mm (H-8) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch markers (2–4)
  • Blocking mat and rust-proof pins
  • Spray bottle
  • Ruler or tape measure

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • BLO – back loop only
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • RS / WS – right side / wrong side

Special stitches:

  • Shell: 7 dc in the same stitch or row end.
  • Large fan: (tr, ch 1) 6 times, tr, all in the same stitch. This makes 7 tr and 6 ch-1 sps.
  • Small fan: (tr, ch 1) 4 times, tr, all in the same stitch. This makes 5 tr and 4 ch-1 sps.
  • Scallop: (sc, hdc, dc, hdc, sc), all in the same ch-3 loop. This makes 5 sts.
  • Bobble: Make it in the stitch indicated. Yarn over, insert hook, pull up a loop, yarn over, pull through 2 loops. Repeat from * to * 3 more times in the same stitch (5 loops on hook). Yarn over and pull through all 5 loops.

Gauge and Checkpoints

Gauge: 16 sc and 20 rows = 4 in (10.2 cm) in BLO sc.

The body itself is your gauge swatch. Make it first and measure it before you add any pink.

Checkpoints:

  1. Body: 0.75 in (1.9 cm) wide × 5 in (12.7 cm) long.
  2. After Wing Row 1: Each shell row extends about 0.75 in (1.9 cm) out from the body.
  3. After Wing Row 2: Each wing side extends 2 in (5.1 cm) from the body. The total width is 4.75 in (12.1 cm). The total height is 5.5 in (14.0 cm), because the outer fans flare about 0.25 in (0.6 cm) past each end of the body.
  4. After Border Round 1: About 5.25 in (13.3 cm) wide.
  5. After Border Round 2: 6.25 in (15.9 cm) wide × 7 in (17.8 cm) tall.

If your body is too long (over 5.25 in / 13.3 cm), go down to a 4.5 mm hook.

If your body is too short (under 4.75 in / 12.1 cm), go up to a 5.5 mm hook.

Always correct the gauge at the body stage. The wing and border counts depend on the body having exactly 25 row ends per side.

Bright pink and royal blue crocheted flowers on white grid-patterned fabric showing detailed stitchwork.

Body (Blue)

With blue, ch 4.

Row 1 (RS): Sc in the 2nd ch from the hook and in each remaining ch. (3 sc)

Rows 2–25: Ch 1, turn. Sc in the BLO of each st across. (3 sc)

Do not fasten off yet. Instead, place a marker in the last stitch, then fasten off and weave in the end.

Row 1 is the bottom of the body, and Row 25 is the top. Each long edge now has 25 row ends.

Number the row ends 1 to 25 from the bottom. You will use these positions:

  • Row ends 1, 7, 13, 19, 25: sc anchors
  • Row ends 4 and 10: lower-wing shells
  • Row ends 16 and 22: upper-wing shells

Checkpoint: The body measures 0.75 in (1.9 cm) × 5 in (12.7 cm), with clear horizontal ridges.

Wings (Pink)

The wings are worked flat in 2 rows, directly into the row ends of the body. Work one side of the body at a time.

Right Wings

Row 1 (RS): With the RS facing, join pink with a sl st in row end 25 on the right edge.

  • Ch 1, then sc in the same row end.
  • Sk 2 row ends, shell in the next row end, sk 2 row ends, sc in the next row end. Repeat from * 3 more times.

You will finish with an sc in row end 1. Your shells land on row ends 22, 16, 10, and 4, and your sc on row ends 25, 19, 13, 7, and 1.

(5 sc + 28 dc = 33 sts; 4 shells)

The math: each repeat uses 6 row ends, so 4 repeats use 24 row ends. Add the starting row end and you get 25 row ends, which is exactly the length of the body.

Row 2 (WS): Ch 4, turn. This ch 4 counts as the first tr, worked into the sc at row end 1. Then work:

  1. Sk 3 dc, small fan in the 4th (center) dc of the shell, sk 3 dc.
  2. Tr in the next sc (row end 7).
  3. Sk 3 dc, small fan in the center dc, sk 3 dc.
  4. Sc in the next sc (row end 13). This shorter stitch creates the waist notch between the lower and upper wings.
  5. Sk 3 dc, large fan in the center dc, sk 3 dc.
  6. Tr in the next sc (row end 19).
  7. Sk 3 dc, large fan in the center dc, sk 3 dc.
  8. Tr in the last sc (row end 25).

Fasten off.

(4 tr anchors + 1 sc + 24 fan tr = 29 sts; 20 ch-1 sps)

The 24 fan tr come from two large fans (7 tr each) and two small fans (5 tr each): 7 + 7 + 5 + 5 = 24.

Left Wings

Row 1 (RS): With the RS facing, join pink in row end 1 on the left edge.

Work Row 1 exactly as for the right wings, moving upward. You will finish with an sc in row end 25. (33 sts; 4 shells)

Row 2 (WS): Ch 4, turn. Then work:

  1. Large fan over the row end 22 shell.
  2. Tr in the sc at row end 19.
  3. Large fan over the row end 16 shell.
  4. Sc in the sc at row end 13.
  5. Small fan over the row end 10 shell.
  6. Tr in the sc at row end 7.
  7. Small fan over the row end 4 shell.
  8. Tr in the last sc (row end 1).

Fasten off. (29 sts; 20 ch-1 sps)

Checkpoint: The motif is 4.75 in (12.1 cm) wide and 5.5 in (14.0 cm) tall. Both sides should mirror each other, with a visible notch at the middle of each side.

Border (Blue)

Border gauge: Each ch-3 loop should span about 0.5 in (1.3 cm) of the wing edge. Each wing side’s outer edge is about 12 in (30.5 cm) long, which holds 24 loops.

The border uses the same yarn and hook as the body. Its density comes from the loop count, not from a different gauge.

Round 1: Chain-Loop Round

Join blue with a sl st in the last tr of the right wings (top end, at row end 25). Ch 1.

Right wing edge:

  1. Sc in the same tr.
  2. Ch 3, sc in the next ch-1 sp. Repeat across all 6 sps of the large fan.
  3. Ch 3, sc in the anchor tr.
  4. Ch 3, sc in the next ch-1 sp. Repeat across all 6 sps of the next large fan.
  5. Ch 3, sc in the notch sc.
  6. Ch 3, sc in the next ch-1 sp. Repeat across all 4 sps of the small fan.
  7. Ch 3, sc in the anchor tr.
  8. Ch 3, sc in the next ch-1 sp. Repeat across all 4 sps of the last small fan.
  9. Ch 3, sc in the bottom end tr.

That gives 25 sc anchors and 24 ch-3 loops on this side.

Body bottom: Sc in each of the 3 free loops of the body foundation chain. (3 sc)

Left wing edge: Starting with an sc in the bottom end tr, work up the left wings in the same way. (25 sc, 24 ch-3 loops)

Body top: Sc in each of the 3 sts of body Row 25. (3 sc)

Join with a sl st to the first sc.

(56 sc + 48 ch-3 loops)

Why the math works: This is a trim round, not a growth round. Each wing side has 25 anchor points: 2 end tr, 20 ch-1 sps, 2 anchor tr, and 1 notch sc. Each anchor gets 1 sc. Loops sit only between neighboring anchors on the same side, so each side has 25 − 1 = 24 loops. The body ends add 3 sc each, worked 1 per existing stitch. The total is 25 + 3 + 25 + 3 = 56 sc.

Round 2: Scallop and Antennae Round

Sl st into the first ch-3 loop and ch 1. Then work around as follows.

Right wing edge: Scallop in each of the 24 ch-3 loops. (120 sts)

Body bottom:

  1. Sk the wing-end sc.
  2. Sc in each of the 3 body-bottom sc.
  3. Sk the next wing-end sc.

(3 sc)

Left wing edge: Scallop in each of the 24 ch-3 loops. (120 sts)

Body top: Sk the wing-end sc, then:

  1. Sc in the 1st body-top sc.
  2. Make an antenna (see below).
  3. Sc in the 2nd body-top sc, then sc in the 3rd body-top sc.
  4. Make a second antenna.

Join with a sl st to the first sc of the round. Fasten off.

Antenna:

  1. Ch 9.
  2. Bobble in the 4th ch from the hook.
  3. Ch 3, then sl st in the same ch as the bobble. This closes the ball tip.
  4. Sl st in each of the remaining 5 ch back toward the body.

The antenna stalk is about 1.5 in (3.8 cm) long.

(Round 2 total: 120 + 3 + 120 + 3 = 246 sts, not counting the antennae)

Round 2 is a conversion round. Each loop becomes exactly 5 stitches (24 × 5 = 120 per side), and the body sc are worked 1 per stitch. Skipping the 4 wing-end sc keeps the corners from ruffling.

Checkpoint: The motif measures 6.25 in (15.9 cm) × 7 in (17.8 cm).

Optional: For a larger piece, you can make several motifs and sew them to a tote or blanket edge. The pattern itself is one motif.

Final Blocking

  1. Weave in all ends along stitches of the same color.
  2. Soak the motif in cool water for 10 minutes. Press out the water in a towel without wringing.
  3. Lay it RS up on the blocking mat.
  4. Pin the body straight. It should be 5 in (12.7 cm) long.
  5. Spread each fan evenly and pin the tip of each scallop. The width should be 6.25 in (15.9 cm) and the height 7 in (17.8 cm).
  6. Open the waist notches slightly so the upper and lower wings read as separate wings.
  7. Curve each antenna outward and pin the ball tips about 1.5 in (3.8 cm) apart.
  8. Let the motif dry completely, for 12–24 hours.

Final Quality-Control Checklist

  • The body is 0.75 in (1.9 cm) × 5 in (12.7 cm), with 25 visible ridges.
  • Each wing side has 4 shells and 4 fans (2 large on top, 2 small on the bottom).
  • The waist notch sits at row end 13 on both sides.
  • Border Round 1 has 24 loops per side and 56 sc in total.
  • Border Round 2 has 24 scallops per side and 246 sts in total.
  • Both antennae have firm, round bobble tips.
  • The left and right halves mirror each other exactly.
  • The finished size is 6.25 in (15.9 cm) × 7 in (17.8 cm).

Troubleshooting

Wings cup or ruffle.
– If they cup, your fans are too tight. Loosen your tr tension.
– If they ruffle, your ch-1 sps are too long. Keep them snug.

Shells don’t line up with the planned row ends.
– Recount the body rows. It must have exactly 25 rows.

The border pulls inward.
– Lengthen the loops to ch 4. Keep the same loop count.

The border waves.
– Use a 4.5 mm hook for Round 2 only.

The notch disappears.
– Make sure you worked an sc, not a tr, at row end 13 in Wing Row 2.

Antennae flop.
– Work the sl sts tightly, then shape them while wet.

Uneven halves.
– Compare the stitch counts for each wing row. Each side should have 33, then 29 sts.

Care

Hand wash in cool water and lay flat to dry. Reshape the scallops and antennae while the motif is damp.

Blue and magenta crocheted butterfly displayed on a wooden windowsill beside a mug of coffee and succulents.

Final Notes

The measurement chain is simple:

  1. A 25-row body at 0.75 in (1.9 cm) × 5 in (12.7 cm).
  2. Two wing rows that bring the width to 4.75 in (12.1 cm).
  3. A two-round border of 56 sc, then 246 sts, that adds 0.75 in (1.9 cm) all around.
  4. A finished motif of 6.25 in (15.9 cm) × 7 in (17.8 cm).

Check the body first, and everything else will fall into place.

Happy crocheting!

Leave a Comment