The Blush Swan Hanging Basket is a wall basket made of a flat filet-mesh swan panel and a shell-stitch basket hung in front of it. The swan’s head turns forward over the basket. She has a solid cream head and neck front, a pink beak, an embroidered closed eye, and a ruffle of pink scallops running down her back.
The palette is soft cream and blush pink. The basket has a pink single-crochet band at the bottom, then layered cream fans, each tier outlined with a pink round. The result looks romantic and a little vintage, and it holds rolled washcloths or guest towels.
This pattern uses US crochet terms. The finished basket stands about 8.5 in (21.6 cm) tall without the hanging loop and 10 in (25.4 cm) with it. The rim is about 9 in (22.9 cm) across.
You’ll make three pieces: an oval base in pink, a basket body worked in joined rounds, and the swan panel worked in rows with the head added afterward. Then you sew the base to the body, stitch the body to the panel, and work a loop at the top.
Finished Size and Construction
- Finished size: 8.5 in (21.6 cm) tall without the loop, 10 in (25.4 cm) with it; rim about 9 in (22.9 cm) across
- Skill level: Intermediate
- Terminology: US
- Yarn weight: #3 light / DK cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 3 (swan panel, basket body, oval base) plus a loop worked onto the panel
- Layout: panel at the back, basket body in front of it, base sewn under the body
- Piece sizes: base 7.25 × 3 in (18.4 × 7.6 cm); basket body 4 in (10.2 cm) tall; panel 8 in (20.3 cm) wide including the scallops
- Size before border: panel mesh 7.2 × 8 in (18.3 × 20.3 cm); basket body 3.8 in (9.7 cm) tall
- Border depth: the panel outline adds 0.2 in (0.5 cm) per edge, and the back scallops add 0.4 in (1.0 cm); the basket rim round adds 0.2 in (0.5 cm)
Materials
Use a smooth mercerized or matte cotton in DK weight. Cotton keeps the shells crisp and stands up to damp bathroom air better than acrylic does.
- Cream: 60 g, about 135 m
- Blush pink: 50 g, about 110 m
- Black embroidery floss: about 1 m, for the eye
Tools: 3.5 mm (E-4) hook, tapestry needle, embroidery needle, 6 stitch markers, rust-proof pins, blocking mat, spray bottle.
The quantities include a margin of about 15% for gauge swatches and differences in tension.
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- sc2tog: single crochet 2 together
- dc: double crochet
- tr: treble crochet
- st(s): stitch(es)
- sp: space
- RS / WS: right side / wrong side
Special stitches:
- Mesh: one dc plus ch 1 over a skipped st or sp. One mesh is 2 sts wide.
- Mesh dec at start of row: sl st in the first ch-1 sp and the next dc, ch 4 (counts as dc + ch 1), then dc in the next dc. This removes 1 mesh.
- Mesh dec at end of row: leave the last mesh unworked and turn. This removes 1 mesh.
Gauge and Checkpoints
- Sc: 20 sts × 22 rows = 4 in (10.2 cm)
- Filet mesh: 10 mesh × 10 rows = 4 in (10.2 cm), so each mesh is 0.4 in (1.0 cm) square
Make the base first and use it as your gauge test. Measure your work at each of these checkpoints:
- Base after Rnd 8: 7.25 × 3 in (18.4 × 7.6 cm)
- Basket body Rnd 1: 18 in (45.7 cm) around, matching the base
- Panel Row 1: 7.2 in (18.3 cm) wide
- Panel after Row 10: 4 in (10.2 cm) tall
- Panel after Row 20: 8 in (20.3 cm) tall
If your work comes out too big, go down 0.5 mm in hook size. If it comes out too small, go up 0.5 mm. Don’t change the stitch counts, because the pieces are joined stitch for stitch.

Oval Base (Pink)
Ch 24.
Rnd 1: Sc in the 2nd ch from the hook and the next 21 ch (22 sc). Work 3 sc in the last ch. Rotate and work along the opposite side of the chain: sc in the next 21 ch, then 2 sc in the last ch (the same ch as the first sc). Join with a sl st to the first sc. (48 sc) This gives 21 sts on each straight side and 3 sts at each curved end. The first sc of the round is one of the end stitches.
Rnd 2: Sl st in the next st, ch 1. Sc in the same st and the next 20 sts. Work 2 sc in each of the next 3 sts, sc in the next 21 sts, then 2 sc in each of the last 3 sts. Join. (54 sc) From now on, every round starts at the first st of a straight side.
Rnds 3–8: Ch 1. Sc in the first 21 sts. Around the first curved end, work [sc in the next X sts, 2 sc in the next st] 3 times. Sc in the next 21 sts. Repeat the bracket once more around the second end. Join.
- Rnd 3: X = 1 (60 sc)
- Rnd 4: X = 2 (66 sc)
- Rnd 5: X = 3 (72 sc)
- Rnd 6: X = 4 (78 sc)
- Rnd 7: X = 5 (84 sc)
- Rnd 8: X = 6 (90 sc)
Each round adds 3 sts at each end, which keeps the curves flat. Fasten off and leave a 24 in (61.0 cm) tail.
Basket Body
Rnd 1 (pink): Ch 90 and join with a sl st, taking care not to twist the chain. Ch 1, then sc in each ch. Join. (90 sc)
Rnds 2–4 (pink): Ch 1, sc in each st, join. (90 sc) Fasten off. This makes a pink band 0.75 in (1.9 cm) tall.
Rnd 5 (cream): Join cream in any st. Ch 1 and sc in the same st. Skip 2 sts, 5 dc in the next st, skip 2 sts, sc in the next st. Repeat from * around. On the last repeat, end with skip 2 and join to the first sc. (15 shells; 15 sc + 75 dc = 90 sts)
Rnd 6 (cream): Sl st in the next 3 sts to reach the center dc. Ch 1 and sc in the same st. Skip 2 sts, 7 dc in the next sc, skip 2 sts, sc in the center dc of the next shell. Repeat from * around and join. (15 sc + 105 dc = 120 sts) This is the flare round: each 6-st repeat becomes 8 sts.
Rnd 7 (pink): Join pink in the first sc. Ch 1, sc in each st, join. (120 sc) Each 8-st repeat now has 1 st over the valley and 7 sts over the shell. The 4th of those 7 sits over the shell’s center.
Rnd 8 (cream): Join cream in a st above a shell center. Ch 1 and sc in the same st. Skip 3 sts, 7 tr in the next st (over the valley), skip 3 sts, sc in the next st (over a shell center). Repeat from * around and join. (15 sc + 105 tr = 120 sts) The new fans sit between the old ones in a brick pattern.
Rnd 9 (pink): Join in the first sc. Ch 1, sc in each st, join. (120 sc)
Rnd 10 (cream): Work as for Rnd 8. (120 sts)
Rnd 11 (pink): Work as for Rnd 9. (120 sc)
Rnd 12 (cream): Work as for Rnd 8. (120 sts)
Checkpoint: The body should measure 3.8 in (9.7 cm) tall, with the rim about 24 in (61.0 cm) around. The rim round comes in the Border section.
Swan Panel (Cream)
Ch 40.
Row 1 (RS): Dc in the 6th ch from the hook. Ch 1, skip 1 ch, dc in the next ch. Repeat from * 17 times. (18 mesh) The end of Row 1 is the front (breast) edge. Odd rows end at the front edge, and even rows start there.
Every later row: Ch 4 (counts as dc + ch 1) and turn. Dc in the next dc, then ch 1, dc in the next dc across. Work the last dc in the 3rd ch of the turning chain. Apply the shaping listed for each row below.
- Row 2: Dec at the start and at the end. (16 mesh)
- Row 3: Dec at the start and at the end. (14 mesh)
- Row 4: Dec at the start (front). (13 mesh)
- Row 5: Dec at the start and at the end. (11 mesh)
- Row 6: Dec at the start (front). (10 mesh)
- Row 7: Dec at the start and at the end. (8 mesh)
- Row 8: Dec at the start and at the end. (6 mesh)
- Row 9: Dec at the start (back). (5 mesh)
- Row 10: Dec at the end (back). (4 mesh)
- Rows 11–20: Work even. (4 mesh) This forms the neck, 1.6 in (4.1 cm) wide.
That’s 7 decreases on each edge, and 18 − 14 = 4 ✓. The body tapers to a point at each lower corner. Fasten off.
Head
Row 1: With the RS facing, join cream at the front end of Row 20. Work 2 sc into each row-end of Rows 20, 19 and 18. (6 sc)
Row 2: Ch 1 and turn. Work 2 sc in the first st, sc in the next 4 sts, and 2 sc in the last st. (8 sc)
Rows 3–4: Ch 1, turn, sc in each st. (8 sc)
Row 5: Ch 1 and turn. Sc2tog, sc in the next 4 sts, sc2tog. (6 sc) Fasten off.
The head stands 1.6 in (4.1 cm) tall and reaches 0.9 in (2.3 cm) forward from the neck.
Make All Pieces
| Piece | Color | Qty |
|---|---|---|
| Oval base | Pink | 1 |
| Basket body | Pink band and accents, cream shells | 1 |
| Swan panel | Cream; beak and scallops in pink | 1 |
Layout, seen from the front:
[ loop ]
[ head ][ neck ]
[ swan mesh panel ]
[ basket body, Rnds 5–13 ]
[ pink band, Rnds 1–4 ]
[ oval base, underneath ]
Border
Work the borders before you join the pieces. The border gauge matches the sc gauge: 5 sts per 1 in (2.5 cm).
Panel Outline (Cream)
Rnd 1: With the RS facing, join at the bottom-back corner. Work sc as follows:
- Bottom: 3 sc in the first foundation ch, 1 sc in each of the next 35 ch, 3 sc in the last ch (41 sc)
- Front edge: 48 sc, made of 2 sc per row-end for Rows 1–17 (34) plus 2 sc across each of the 7 stepped mesh (14)
- Under the head: 5 sc, one per head row-end
- Head front: 3 sc in the first st, sc in the next 4 sts, 3 sc in the last st (10 sc)
- Top of the head: 5 sc
- Top of the neck: 1 sc in each of the 9 sts of Row 20, with 3 sc in the last st (11 sc)
- Back edge: 54 sc, made of 2 sc per row-end for Rows 1–20 (40) plus 2 sc across each of the 7 back steps (14)
Join. (174 sc)
Why the math works: each mesh row-end and each step is 0.4 in (1.0 cm) wide. At 5 sts per inch, 2 sc fill exactly that space, so the edge lies flat.
Beak (Pink)
Join pink in the 4 center sts of the head front.
- Rows 1–2: Sc 4. (4 sc)
- Row 3: Sc2tog, sc 2. (3 sc)
- Row 4: Sc 3. (3 sc)
- Row 5: Sc2tog, sc 1. (2 sc)
- Row 6: Sc2tog. (1 sc)
The beak is 1.1 in (2.8 cm) long. Weave in the ends along the beak’s edges.
Back Scallops (Pink)
Join pink in the center sc of the top-back corner. Sc in the same st. Skip 1 st, 5 dc in the next st, skip 1 st, sc in the next st. Repeat from * 14 times, ending in the first sc of Rnd 1. (14 scallops; 15 sc + 70 dc)
This works over 57 sts: the corner center, 1 more corner st, the 54 back-edge sts, and the first sc of the round. Since 1 + 14 × 4 = 57, the last scallop ends exactly at the bottom corner.
Front Neck Band (Cream)
The front edge has 48 sts, and the last 14 of them sit along Rows 11–17. Join cream in the first of those 14 sts.
Rows 1–3: Sc 14, then ch 1 and turn after each row. (14 sc)
Sew the top of the band to the underside of the head. The band adds 0.5 in (1.3 cm) of solid neck.
Basket Rim (Rnd 13, Pink)
Join pink in the first sc of Rnd 12. Ch 1, sc in each st, join. (120 sc: 60 across the front half and 60 across the back half)
This round is 1 sc per existing st with nothing added: fifteen 8-st repeats give 120 sts.
Eye and Loop
Eye: With the floss, backstitch a curved closed eye with 3 short lashes in the center of the head.
Loop: Join cream in the middle st of Row 20. Ch 16, sl st in the same st, turn, work 22 sc into the loop, and sl st to finish. The loop is 1.5 in (3.8 cm) long.
Joining
- Base to body: Hold the base under Rnd 1 of the body with the WS together. With pink, work sc through both pieces, 1 st to 1 st. (90 sc) Line up the base’s back 37 sts (Rnd 8 sts 83–90 and 1–29) with 37 body sts centered on the body’s seam.
- Body to panel: Lay the panel behind the body. With cream, whipstitch the 37 back sts of Rnd 4 to outline sts 3–39 along the panel bottom, 37 to 37.
- Rim: Tack the rim to the panel at 3 points: where it crosses the front edge, where it crosses the back edge, and at the center of Row 9.
Keep your tension relaxed so the seams lie flat and don’t pucker. Check that the back of the basket measures 7.4 in (18.8 cm) across.
Final Blocking
- Mist the whole piece until it is evenly damp.
- Pin the panel flat, then ease the neck into a gentle S-curve.
- Angle the beak slightly downward and pin it in place.
- Open out each of the 14 pink back scallops.
- Stuff the basket with towels so the fans round out.
- Let it dry for 24 hours before you hang it.
Final Quality-Control Checklist
- Base: 90 sts, 7.25 × 3 in (18.4 × 7.6 cm)
- Every fan round and the rim: 120 sts
- Panel outline: 174 sc
- Back scallops: 14, evenly spaced
- Neck band lies flat against the head
- Eye symmetrical
- Loop holds firm when you tug it
Troubleshooting
- Base is cupping: Your tension is too tight; go up a hook size.
- Base is rippling: Make sure each round adds exactly 6 increases.
- Fans are curling: Block them over the stuffed basket.
- Scallop count is off: Recount the 54 back-edge sts.
- Panel is leaning: Compare where you placed the decreases with the row list.
- Basket is too heavy and tips forward: Add a fourth tack point at Row 11.
Care
Hand wash in cool water and lay flat to dry. Reshape the scallops while the basket is still damp.

Final Notes
The measurements depend on each other. The 90-st base matches the 90-st body, and the 120-st fan tiers carry through to the 120-st rim. The 18-mesh panel makes a bottom 7.2 in (18.3 cm) wide that is joined to the 37-st back of the basket, and 20 rows give the panel its 8 in (20.3 cm) height.
Happy crocheting!