These hanging baskets combine a chunky rope cable texture with a simple, practical shape. Each basket is a firm little cylinder with eight twisted cables around the body, a rolled rim and a teardrop handle that hooks onto a wooden dowel with a leather strap. Hung in a row of three, they hold brushes, combs, small bottles or desk supplies.
The set is worked in one solid burgundy color, which keeps the cables crisp and lets the texture stand out. The yarn is a bulky cotton blend, so the baskets hold their shape without any lining or stiffener.
This pattern uses US crochet terms. Each finished basket measures 5 in (12.7 cm) across the base, about 5.25 in (13.3 cm) across the rim and 5.75 in (14.6 cm) tall without the handle. The handle peak sits about 4.75 in (12.1 cm) above the rim.
For each basket, you crochet a flat round base, a separate cabled tube body and a handle strip. You join the base to the body with a round of single crochet, work a rolled rim, then sew the handle to the back. Make three baskets and hang them from a dowel with leather straps.
Finished Size and Construction
- Finished size (each basket): 5 in (12.7 cm) base diameter × 5.75 in (14.6 cm) tall
- Skill level: Intermediate (front post cables)
- Terminology: US crochet terms
- Yarn weight: Bulky (#5) cotton blend
- Hook: 6.0 mm (US J-10)
- Number of pieces: 3 baskets, each made of 3 crocheted parts (base, body, handle) = 9 crocheted parts in total
- Layout: 3 baskets in a single row on a 20 in (50.8 cm) dowel
- Piece size: base 5 in (12.7 cm) diameter; body 16 in (40.6 cm) circumference
- Size before border: body 5 in (12.7 cm) tall, 48 stitches around
- Border (rim) depth: 0.5 in (1.3 cm)
Materials
Choose a smooth bulky cotton or cotton-blend yarn with good stitch definition. Fuzzy or very soft yarn will blur the cables and make floppy baskets. The amounts below are based on a yarn of about 120 m (131 yd) per 100 g.
- Burgundy: 250 g / 300 m (328 yd) for all three baskets (about 70 g / 84 m (92 yd) per basket)
The quantities include a margin of about 15% for swatching and tension differences.
Tools and supplies:
- 6.0 mm (US J-10) crochet hook
- Tapestry needle
- 4 stitch markers
- 3 brown leather straps with snap closures, about 0.75 in (1.9 cm) wide
- 1 wooden dowel, 20 in (50.8 cm) long and 0.75 in (1.9 cm) in diameter
- 2 wall brackets or cup hooks for the dowel
- Measuring tape
- Blocking pins and a spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- fsc – foundation single crochet
- FPdc – front post double crochet
- FPtr – front post treble crochet
- rev sc – reverse single crochet (crab stitch)
- st(s) – stitch(es)
- rnd(s) – round(s)
Special stitch – Rope Cross (RC): Skip the next 2 sts. Work FPtr around each of the next 2 sts. Then, working in front of the 2 sts you just made, work FPtr around each of the 2 skipped sts. This uses 4 sts and makes 4 sts, so the count does not change.
Gauge and Checkpoints
Gauge:
– Single crochet: 12 sts and 12 rnds = 4 in (10.2 cm)
– Cable pattern: 12 sts and 8 rnds = 4 in (10.2 cm)
That means 3 sts = 1 in (2.5 cm) in both fabrics. Each cable-pattern round adds 0.5 in (1.3 cm), and each sc round adds 0.25 in (0.6 cm). (The 3 sts per inch measurement applies across the stitches. Single crochet rounds are about 0.33 in (0.8 cm) tall on a flat swatch, but a round sitting between cable rounds compresses to the 0.25 in shown in the height checkpoints.)
Make one complete base first and check it before starting anything else. It is the quickest way to confirm your tension.
Checkpoints:
– Base after Rnd 6: 3.75 in (9.5 cm) across
– Base after Rnd 8: 5 in (12.7 cm) across
– Body after Rnd 1: 16 in (40.6 cm) around when laid flat as a loop
– Body after Rnd 10: 4.75 in (12.1 cm) tall
– Body after Rnd 11: 5 in (12.7 cm) tall
– Finished basket: 5.75 in (14.6 cm) tall
If your piece is too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. Don’t change the stitch counts. The base and body must both stay at 48 sts so they join one to one.

Base (make 3)
The base is worked in continuous joined rounds and is not turned. The right side faces you throughout.
Rnd 1: Make a magic ring. Ch 1, work 6 sc into the ring, then sl st to the first sc. (6 sts)
Rnd 2: Ch 1, work 2 sc in each st around, then sl st to the first sc. (12 sts)
Rnd 3: Ch 1, sc in next st, 2 sc in next st; repeat from * 6 times in total, then sl st to the first sc. (18 sts)
Rnd 4: Ch 1, sc in next 2 sts, 2 sc in next st; repeat from * 6 times, then join. (24 sts)
Rnd 5: Ch 1, sc in next 3 sts, 2 sc in next st; repeat from * 6 times, then join. (30 sts)
Rnd 6: Ch 1, sc in next 4 sts, 2 sc in next st; repeat from * 6 times, then join. (36 sts)
Checkpoint: the base should measure 3.75 in (9.5 cm) across.
Rnd 7: Ch 1, sc in next 5 sts, 2 sc in next st; repeat from * 6 times, then join. (42 sts)
Rnd 8: Ch 1, sc in next 6 sts, 2 sc in next st; repeat from * 6 times, then join. (48 sts)
Checkpoint: the base should measure 5 in (12.7 cm) across. 48 sts ÷ 3 sts per inch = 16 in (40.6 cm) around, which is a diameter of about 5 in.
Fasten off, leaving a 6 in (15.2 cm) tail. Weave in the center tail. Leave the outer tail for now.
Body (make 3)
The body is a separate tube, worked in joined rounds with the right side facing you. The ch 2 at the start of each round doesn’t count as a stitch. Place a marker in the first stitch of every round.
Rnd 1: Work 48 fsc. Join with a sl st to the first fsc, taking care not to twist the strip. (48 sts)
Checkpoint: the loop should measure 16 in (40.6 cm) around.
Rnd 2: Ch 2, hdc in each st around, then sl st to the first hdc. (48 sts)
Rnd 3 (cable setup): Ch 2, hdc in next 2 sts, FPdc around each of next 4 sts; repeat from * 8 times in total, then join. (48 sts: 16 hdc + 32 FPdc)
Rnd 4 (cross): Ch 2, hdc in next 2 hdc, RC over next 4 FPdc; repeat from * 8 times, then join. (48 sts: 16 hdc + 32 FPtr)
Rnd 5 (even): Ch 2, hdc in next 2 hdc, FPdc around each of next 4 post sts; repeat from * 8 times, then join. (48 sts)
Rnd 6 (even): Repeat Rnd 5. (48 sts)
Rnd 7 (cross): Repeat Rnd 4. (48 sts)
Rnds 8–9 (even): Repeat Rnd 5 twice. (48 sts)
Rnd 10 (cross): Repeat Rnd 4. (48 sts)
Checkpoint: the body should measure 4.75 in (12.1 cm) tall. That is 0.25 in for the fsc round plus 9 cable-pattern rounds at 0.5 in each.
Rnd 11: Ch 1, sc in each st around, then join. (48 sts)
Checkpoint: the body should measure 5 in (12.7 cm) tall and 16 in (40.6 cm) around.
Don’t fasten off. Leave the working loop on a stitch marker. You will work the rim from here after joining the base.
Every cross on Rnds 4, 7 and 10 goes in front, in the same direction. This makes the twisted rope look shown in the photo, with three twists in each cable.
Handle (make 3)
Row 1: Ch 37, sc in 2nd ch from hook and in each ch across. (36 sts)
Row 2: Ch 1, turn, sc in each st across. (36 sts)
Row 3: Ch 1, turn, sl st in each st across. (36 sts)
Fasten off, leaving a 12 in (30.5 cm) tail for sewing. The strip should measure 12 in (30.5 cm) long. The sl st row firms up the edge so the handle doesn’t stretch under load. When folded in half, the strip forms the teardrop loop shown in the photo.
Make All Pieces
Per basket:
– 1 base (48 sts)
– 1 body (48 sts)
– 1 handle (36 sts)
For the set:
– 3 bases
– 3 bodies
– 3 handles
All parts are burgundy.
Hanging layout on the 20 in (50.8 cm) dowel, seen from the front:
|----------------- Dowel 20 in (50.8 cm) -----------------|
[Strap 1] [Strap 2] [Strap 3]
Basket 1 Basket 2 Basket 3
at 3.5 in at 10 in at 16.5 in
(8.9 cm) (25.4 cm) (41.9 cm)
Strap centers are 6.5 in (16.5 cm) apart. This leaves about 1.25 in (3.2 cm) of space between neighboring rims.
Joining
Method: Join with a round of single crochet on the outside, worked through both layers. This makes the bottom ridge seen on the finished baskets.
- Place the base under the body with the wrong sides together. The right side of the base faces down and out.
- Line up the 48 sts of base Rnd 8 with the 48 fsc stitches of body Rnd 1. Place a marker at every 12th stitch on each piece and match the 4 markers.
- Join the yarn at any marker. Ch 1, then work 1 sc through each matching pair of stitches (one base st plus one fsc st) all the way around. Sl st to the first sc. (48 sts)
Stitch logic: The base has 48 sts and the body has 48 sts, so every stitch pairs one to one. You don’t need to skip or add any stitches. Between each pair of markers you should have exactly 12 joining sc.
Tension: Keep the joining stitches at your normal sc tension. Pulling tight makes the base cup upward. Working loosely makes a wavy bottom edge.
Checkpoint: The basket should stand flat with no rocking. It should measure 5 in (12.7 cm) across the base and 5.25 in (13.3 cm) tall at this stage.
Fasten off and weave in the ends, including the outer tail of the base.
Border (Rolled Rim)
Border gauge: 3 sts = 1 in (2.5 cm), the same as the body.
Pick up the live loop at the top of body Rnd 11. Place markers to divide the 48 sts into 4 quarters of 12 sts each.
Rnd 12: Ch 1, sc in each st around, then join. (48 sts: 12 per quarter)
Rnd 13: Ch 1. Without turning, work rev sc in each st around, moving from left to right (if you crochet right-handed). Join with a sl st to the first st. (48 sts: 12 per quarter)
Fasten off and weave in the ends.
Why the math works: The rim count is exactly the same as the body count: 48 = 8 cable repeats × 6 sts. Because the rim has no increases or decreases, it doesn’t flare or pull in. The reverse sc rolls into the thick cord edge seen in the photo. The two rim rounds add 0.5 in (1.3 cm), which brings the basket to 5.75 in (14.6 cm) tall. The slight roll makes the rim about 5.25 in (13.3 cm) across.
Attaching the Handle
- Pick a background hdc column at the back of the basket and call it the back center.
- Mark 2 points on the inside of the basket, at Rnd 11. Each point sits 4.5 sts from the back center, so the two points are 9 sts or 3 in (7.6 cm) apart.
- Fold the handle in half without twisting it. Overlap each end by 1 in (2.5 cm) on the inside of the body at one of the marked points.
- Use the long tail to sew each end down with small whipstitches through both handle rows and the body fabric. Stitch a box shape for strength.
- Checkpoint: the handle peak should sit about 4.75 in (12.1 cm) above the rim.
Final Blocking
- Lightly spray each basket with water until it is damp, not soaked.
- Stuff the basket firmly with a rolled towel or a 5 in (12.7 cm) jar to set the cylinder shape.
- Pinch each cable gently forward and straighten the background columns so they run straight up.
- Smooth the rolled rim into an even curve.
- Lay each handle flat in a teardrop shape and pin it to 12 in (30.5 cm) along its length.
- Let everything dry completely, for at least 24 hours, before removing the forms.
Final Quality-Control Checklist
- [ ] Each base measures 5 in (12.7 cm) and lies flat
- [ ] Each body has 48 sts and 8 cables, with crosses on Rnds 4, 7 and 10
- [ ] All crosses twist the same way
- [ ] The joining round has 48 sc and the bottom stands without rocking
- [ ] The rim has 48 sts with an even rolled edge
- [ ] Each basket is 5.75 in (14.6 cm) tall
- [ ] The handle ends are 3 in (7.6 cm) apart and securely boxed-stitched
- [ ] All three baskets match in height and width within 0.25 in (0.6 cm)
- [ ] All ends are woven in on the inside
Troubleshooting
The cables pull the body narrower than 16 in (40.6 cm): Front post stitches tighten the fabric. Work the hdc background a little looser, or go up 0.5 mm in hook size for the body only.
The base cups or ruffles: If it cups, your tension is tight, so go up a hook size. If it ruffles, your tension is loose, so go down a hook size. Recount to make sure you have exactly 6 increases per round.
The joining round puckers: Recheck the marker alignment. Each quarter must have exactly 12 sts on both pieces.
The rim flares: You may have added stitches in Rnd 12. Recount to 48 sts.
The handle stretches: Make sure Row 3 is worked in firm slip stitches. You can also line the handle with a second row of sl sts along the foundation chain.
The cables lean sideways: Cross in front on every cross round. Don’t alternate between front and back.
Care
Hand wash in cool water, press out the excess water in a towel, and dry the baskets over a form to keep their shape. Don’t tumble dry. The leather straps should be removed before washing.

Final Notes
The whole set rests on one number: 48. The base grows to 48 sts and measures 5 in (12.7 cm) across. The body starts and ends at 48 sts with 8 cables of 6 sts each, 16 in (40.6 cm) around and 5 in (12.7 cm) tall. The joining round matches 48 to 48. The rim keeps 48 sts and adds 0.5 in (1.3 cm) to reach 5.75 in (14.6 cm). If you check your gauge on the first base and confirm each checkpoint, the three baskets will match and hang evenly on the dowel.
Happy crocheting!