Buttercup Fan Hanging Basket Crochet Pattern

The Buttercup Fan Hanging Basket is a soft, sunny storage basket that hangs from a peg rail. It is sized to hold three standard toilet-paper rolls, and it works just as well for washcloths, cotton pads or small toiletries. The walls are made of staggered open fans, and the top edge is scalloped with a neat rope-twist trim.

The whole piece uses one pale butter-yellow worsted cotton. Two natural wooden rings give it a calm, Scandinavian-bathroom look, so the basket blends in without disappearing.

This pattern uses US crochet terms. The finished basket measures 13.5 in (34.3 cm) long, 4.75 in (12.1 cm) deep and 5.5 in (14.0 cm) tall at the scallop peaks. Each strap is 8 in (20.3 cm) long before folding.

Construction is simple. You crochet a solid oval base in joined rounds, turn the wall up with a back-loop round, and work three solid rounds. Then you work six rounds of staggered fans and finish with a two-round rim. Last, you crochet two flat straps, fold each one around a wooden ring, and sew them inside the back wall.

Finished Size and Construction

  • Finished size: 13.5 in (34.3 cm) long × 4.75 in (12.1 cm) deep × 5.5 in (14.0 cm) tall
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 3 (1 basket body, 2 straps)
  • Layout: Straps sewn inside the back long wall, 6.5 in (16.5 cm) apart center to center
  • Base size: 13.5 × 4.75 in (34.3 × 12.1 cm)
  • Wall height before rim: 5.2 in (13.2 cm)
  • Rim depth: 0.4 in (1.0 cm)

Materials

Yarn: Use a firm, smooth worsted-weight cotton or cotton blend at about 190 m per 100 g. Cotton keeps the fans crisp and holds the basket’s shape. Avoid acrylic, which tends to sag when the basket is loaded.

  • Pale butter yellow: 200 g, about 380 m

Tools:
– 4.5 mm (US 7) crochet hook
– 2 wooden rings, 2 in (5.1 cm) outer diameter
– 4 locking stitch markers
– Tapestry needle
– Scissors
– Measuring tape
– Rust-proof pins and a blocking mat
– Optional: fabric stiffener

The yarn quantity includes about a 15% margin for swatching and tension differences.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • BLO – back loop only
  • rev sc – reverse single crochet (crab stitch)
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • rep – repeat

Special stitch – Open Fan (OF): Work (dc, ch 1) 4 times, then dc, all in the same stitch. Each OF has 5 dc and 4 ch-1 sps, so it counts as 9 sts. The center dc is the 3rd dc, which is the 5th stitch of the fan.

Rev sc: Work single crochet from left to right (right-handed): insert the hook into the next stitch to the right, yarn over, pull up a loop, yarn over and pull through both loops.

Gauge and Checkpoints

Gauge: 16 sc and 18 rows = 4 in (10.2 cm) in sc.

Fan gauge: One fan repeat (10 sts) = 2.5 in (6.4 cm) wide, and 6 fan rounds = 4.5 in (11.4 cm) tall.

Use the base as your swatch. Measure it at each checkpoint before you go on:

  • After Rnd 5: 11.25 × 2.5 in (28.6 × 6.4 cm)
  • After Rnd 10: 13.5 × 4.75 in (34.3 × 12.1 cm)
  • After Rnd 13: the wall stands 0.7 in (1.8 cm) tall
  • After Rnd 19: the wall stands 5.2 in (13.2 cm) tall

If your piece is too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. A base that is more than 0.25 in (0.6 cm) off will not fit three rolls well, so restart rather than push on.

Close-up of beige crocheted textile showing detailed stitching and looped yarn patterns resting on wood.

Basket Base

The base is worked in joined rounds and is not turned. Join each round with a sl st to the first sc. The ch 1 at the start of a round does not count as a stitch.

Foundation: Ch 38.

Rnd 1: Sc in 2nd ch from hook and in next 35 ch, 3 sc in last ch. Working along the opposite side of the foundation ch, sc in next 35 ch, then 2 sc in the same ch as the first sc. Join. (76 sts)

Each straight side now has 35 sts and each curved end has 3 sts. Place a marker in the first and last stitch of each curved end.

Rnd 2: Ch 1, 2 sc in first st, sc in next 35 sts, 2 sc in each of next 3 sts, sc in next 35 sts, 2 sc in each of last 2 sts. Join. (82 sts)

Rnds 3–10: For each round, let k = round number minus 2.
Ch 1, [sc in next k sts, 2 sc in next st] once, sc in next 35 sts, [sc in next k sts, 2 sc in next st] 3 times, sc in next 35 sts, [sc in next k sts, 2 sc in next st] twice. Join.

This adds 6 sts per round, all on the curved ends. The straight sides stay at 35 sts.

Stitch count for each round:

Rnd Total sts
3 88
4 94
5 100
6 106
7 112
8 118
9 124
10 130

Check that the base lies flat and measures 13.5 × 4.75 in (34.3 × 12.1 cm). The perimeter should be about 32.5 in (82.6 cm), which matches 130 sts at 0.25 in (0.6 cm) each.

Basket Wall

Rnd 11 (turning round): Ch 1, sc in BLO of each st around. Join. (130 sts)

The unworked front loops make a crisp fold line, and the wall starts to rise.

Rnds 12–13: Ch 1, sc in each st around. Join. (130 sts)

This is the solid bottom band.

Rnd 14 (first fan round): Ch 1, sc in first st, sk 4 sts, OF in next st, sk 4 sts, sc in next st. Rep from * 12 more times, leaving out the final sc on the last repeat, and join to the first sc. (13 OF + 13 sc = 130 sts)

Rnd 15 (staggered fan round): Sl st in each of the next 4 sts (2 dc and 2 ch-1 sps), then sl st in the center dc of the first OF. Ch 1, sc in the same center dc, sk 4 sts, OF in next sc, sk 4 sts, sc in center dc of next OF. Rep from * 12 more times, leaving out the final sc on the last repeat, and join to the first sc. (13 OF + 13 sc = 130 sts)

Each new fan sits in the valley sc between two fans of the round below. Each sc lands on a fan’s center dc. This offset creates the staggered fan pattern.

Rnds 16–19: Repeat Rnd 15. (130 sts each round)

You now have 6 fan rounds. The wall should measure 5.2 in (13.2 cm) from the fold line. The fans of Rnd 19 form the scallops at the top edge.

Make All Pieces

You need 3 pieces, all in pale butter yellow:

  • Basket body: 1
  • Straps: 2, each folded around one wooden ring

Layout, looking at the back wall from inside the basket:

   [ring]                  [ring]
     ||                      ||
   strap                   strap
     ||                      ||
|----+----- back wall -------+----|
 3.5 in        6.5 in          3.5 in

Strap (make 2)

Foundation: Ch 6.

Row 1: Sc in 2nd ch from hook and in each ch across. (5 sts)

Rows 2–30: Ch 1, turn, sc in each st across. (5 sts)

Row 31: Ch 1, turn, 2 sc in first st, sc in next 3 sts, 2 sc in last st. (7 sts)

Row 32: Ch 1, turn, sc in each st across. (7 sts)

Row 33: Ch 1, turn, 2 sc in first st, sc in next 5 sts, 2 sc in last st. (9 sts)

Rows 34–36: Ch 1, turn, sc in each st across. (9 sts)

Fasten off and leave a 20 in (50.8 cm) tail.

Strap checkpoint: The strap is 8 in (20.3 cm) long, 1.25 in (3.2 cm) wide at the top and 2.25 in (5.7 cm) wide at the flared end.

Attach the ring: Thread Rows 1–9 (2 in / 5.1 cm) through one wooden ring. Fold that end down against the strap and whipstitch it flat across the row ends and Row 1. Use a separate length of yarn for this.

Joining

Method: Whipstitch the straps to the inside of the back long wall.

Placement: Center each strap 3.5 in (8.9 cm) in from each end of the basket, so the straps are 6.5 in (16.5 cm) apart center to center. Choose the long side whose fan pattern looks best as the front, and use the other long side as the back.

Stitch-to-stitch logic: Lay the flared Rows 30–36 (1.5 in / 3.8 cm) flat against the inside of the wall, with Row 36 pointing down toward the base. Whipstitch all 9 sts of Row 36 to the wall. Then sew up both edges of the strap, catching one stitch of the wall for each strap row end. Sew through the solid parts of the fans and the dc posts, not through the ch-1 spaces, which would stretch.

Tension: Keep the stitches snug, but don’t let them pucker the wall. The fans should lie smooth over the strap.

Size checkpoint: About 4.4 in (11.2 cm) of each strap should show between the ring and the rim. Hold the basket up by both rings. The rim should hang level, with no tilt.

Border

The rim is worked around the top of the basket after the straps are sewn on. It has no corners, so the counts are given per scallop: 13 scallops in total, 10 base sts each.

Border gauge: Each scallop is 14 sts, spread along a 2.5 in (6.4 cm) fan arc.

Rnd 20 (trim round): Join yarn in any valley sc of Rnd 19. Ch 1, sc in same st, [sc in next dc, 2 sc in next ch-1 sp] 4 times, sc in next dc, sc in next valley sc. Rep from * around, leaving out the final sc on the last repeat, and join.

  • Per scallop: 10 sts worked 1-per-existing-st + 4 extra sts (one extra in each ch-1 sp) = 14 sts
  • Total: 130 + 52 = 182 sts

Rnd 21: Ch 1, rev sc in each st around. Join and fasten off. (182 sts)

Why the math works: Each fan’s top edge curves, so it is longer than the 10 sts it sits on. The 4 extra sts in each scallop give the trim enough length to follow that curve. Without them the rim would pull in and flatten the scallops. With more than 4 extra, the rim would ruffle. Rnd 21 then works one rev sc into each of the 182 sts, so the twisted edge keeps that length without adding stitches.

Final Blocking

  1. Weave in all ends, running each one through at least 2 in (5.1 cm) of solid sc.
  2. Soak the basket in cool water for 10 minutes, then press the water out gently in a towel. Do not wring it.
  3. Optional: brush fabric stiffener over the walls, following the label.
  4. Stuff the basket firmly with towels, or a box about 13 × 4.5 × 5.5 in (33.0 × 11.4 × 14.0 cm).
  5. Shape the base into a flat, even oval. Pin each scallop peak so it points straight up.
  6. Pin the straps flat and straight, with the rings at the top.
  7. Let it dry completely, which takes 24–48 hours, before you remove the pins.

Final Quality-Control Checklist

  • The base measures 13.5 × 4.75 in (34.3 × 12.1 cm) and lies flat.
  • There are 13 fans in every fan round, and every round counts 130 sts.
  • Each fan sits centered over the valley below it.
  • The rim counts 182 sts and has 13 even scallops.
  • Both straps are 8 in (20.3 cm) long before folding, and each ring is sewn flat into its fold.
  • The straps are 6.5 in (16.5 cm) apart, and the basket hangs level.
  • Three rolls fit side by side without stretching the walls.

Troubleshooting

  • The base cups upward: your tension is too tight on the curved ends. Redo the increase rounds slightly looser, or go up a hook size.
  • The base ruffles: your increases are too loose. Go down a hook size.
  • The fans don’t line up: recount the 4 skipped sts. Remember that ch-1 sps count as stitches.
  • The rim flares out: you added extra sts in places other than the ch-1 sps. Check for 14 sts per scallop.
  • The walls slump: use the fabric stiffener, or block over a box.
  • The basket tilts when hanging: re-measure the strap placement and sew both straps at the same depth.

Care

Hand wash in cool water and lay flat to dry, shaped over a box. If you used stiffener, re-stiffen after washing.

Pale yellow crocheted basket hangs from wooden rod, holding three white toilet paper rolls in a bright bathroom.

Final Notes

The measurement chain is short and easy to check:

  • Gauge: 16 sc = 4 in (10.2 cm)
  • Base: 130 sts, 13.5 × 4.75 in (34.3 × 12.1 cm)
  • Six fan rounds of 13 repeats: wall 5.2 in (13.2 cm)
  • Rim: 182 sts, finished height 5.5 in (14.0 cm)
  • Two 8 in (20.3 cm) straps sewn 6.5 in (16.5 cm) apart

If each stage matches its checkpoint, the finished basket will hold three rolls and hang level.

Happy crocheting!

Leave a Comment