Coral Blossom Letter S Keychain Crochet Pattern

This letter S keychain is quick to make and full of personality. The letter is a single coral strip with a ribbed texture, outlined with a soft cream edge. Three tiny lilac flowers with green leaves finish it off. A gold split ring and a short chain turn it into a bag charm.

The colors are warm and gentle: coral pink for the letter, cream for the outline, lilac for the flowers, buttery yellow for the flower centers, and sage green for the leaves. It has a sweet, handmade look and suits a backpack, pencil case, set of keys, or gift wrap.

The pattern uses US crochet terms. The finished letter is about 3.5 in (8.9 cm) tall and 2.6 in (6.6 cm) wide, including the border.

The construction is simple. You work one foundation chain and one shaped row of double crochet. Increases curve the top bowl one way, and decreases curve the bottom bowl the other way. One round of cream single crochet outlines the whole letter. Then you make three flowers and six leaves, sew them on, and add the hardware.

Finished Size and Construction

  • Finished size: 3.5 in (8.9 cm) tall x 2.6 in (6.6 cm) wide
  • Skill level: Easy to intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK (light worsted, #3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 1 letter, plus 3 flower and 6 leaf appliqués
  • Layout: One letter on its own, no joining
  • Band width before border: 0.5 in (1.3 cm)
  • Band width after border: 0.9 in (2.3 cm)
  • Size before border: 3.1 in (7.9 cm) tall x 2.2 in (5.6 cm) wide
  • Border depth: 0.2 in (0.5 cm) on every edge

Materials

Choose a smooth mercerized or combed DK cotton. Cotton holds the curves well, shows the ribbing clearly, and stands up to daily life on a bag. Avoid fuzzy or brushed yarns, which hide the stitch detail. Use the same yarn line for all five colors so the stitches are the same height and thickness. Scraps work well here, since every color needs only a few grams.

  • Coral pink (Color A): 10 g / 23 m
  • Cream (Color B): 5 g / 12 m
  • Lilac (Color C): 3 g / 7 m
  • Sage green (Color D): 2 g / 5 m
  • Yellow (Color E): 1 g / 2 m

Tools:

  • 3.5 mm (E-4) crochet hook
  • Tapestry needle
  • Scissors
  • 2 stitch markers
  • 1 in (2.5 cm) gold split ring with a short chain about 0.75 in (1.9 cm) long, plus 1 small jump ring
  • Rust-proof pins and a foam blocking board
  • Spray bottle with water

All quantities include extra for a gauge swatch and weaving in ends.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • dc2tog – double crochet 2 together
  • st(s) – stitch(es)
  • RS – right side

Special stitch – dc2tog: Yarn over, insert your hook in the next ch, pull up a loop, yarn over, and pull through 2 loops. Yarn over, insert your hook in the following ch, pull up a loop, yarn over, and pull through 2 loops. Yarn over and pull through all 3 loops on the hook. This uses 2 chains and makes 1 stitch.

Gauge and Checkpoints

Gauge: 10 dc = 2 in (5.1 cm) wide, and 1 dc row = 0.5 in (1.3 cm) tall, worked in DK cotton with a 3.5 mm hook.

To check gauge, chain 13 and work 1 dc in the 4th chain from the hook and in each chain to the end (11 sts in total, including the skipped chains). Measure across 10 stitches and measure the height of the row.

Make one letter as a test before you buy hardware. The curves depend on how tall your stitches are compared with how wide they are, so even a small gauge difference changes the shape.

Checkpoints:

  1. Foundation chain: 40 ch should measure about 8 in (20.3 cm), unstretched.
  2. After the top bowl (the 18 increase dc): The strip should curl into a hook about 2 in (5.1 cm) across on the outside. The band should be 0.5 in (1.3 cm) wide.
  3. End of Row 1: Gently shaped by hand, the S should measure 3.1 in (7.9 cm) tall x 2.2 in (5.6 cm) wide.
  4. After the border: The letter should measure 3.5 in (8.9 cm) x 2.6 in (6.6 cm).

If it’s too big: Go down 0.5 mm in hook size, or check that your chains aren’t loose. If it’s too small: Go up 0.5 mm. For a charm, being within 0.25 in (0.6 cm) of the target is fine. If the bowls curl too tightly or not enough, see Troubleshooting.

Textured crocheted coral five with purple flowers, yellow centers, and green leaves on wood.

Letter S

The foundation chain becomes one edge of the strip. On the top bowl, the chain is on the inside of the curve. On the bottom bowl, it’s on the outside. That’s why the top bowl uses increases and the bottom bowl uses decreases.

With Color A (coral), ch 40.

Row 1 (RS): Dc in the 4th ch from the hook (the 3 skipped ch count as the first dc), then dc in the next ch. (3 sts so far: top end.)

2 dc in each of the next 9 ch. (18 dc in this section; 21 sts so far: top bowl.)

Dc in each of the next 6 ch. (6 dc in this section; 27 sts so far: diagonal middle stroke.)

Dc2tog 9 times over the next 18 ch. (9 sts in this section; 36 sts so far: bottom bowl.)

Dc in each of the last 2 ch. (2 dc in this section: bottom end.)

Row 1 total: 38 sts. To check your chain use: 3 + 2 + 9 + 6 + 18 + 2 = 40 ch.

Fasten off, leaving a 6 in (15.2 cm) tail.

Shaping tips: Place a stitch marker in the first increase dc and another in the first dc2tog. If you lose count, these let you check each section quickly. Work every increase pair the same height. Uneven increases make the top bowl lumpy.

Lay the strip RS up. The top bowl curls with the chain on the inside, and the bottom bowl curls the opposite way with the chain on the outside. Ease it into an S. Each bowl turns about 200 degrees, which gives the classic letter shape with small, open centers.

The dc posts lie across the band side by side, which creates the ribbed look. On the top bowl they fan out toward the outer edge. On the bottom bowl they gather toward the inner edge.

Border

Border gauge: 5 sc = 1 in (2.5 cm) along the edges. This matches the dc gauge, so 1 sc per stitch or chain loop keeps the edge flat. The sc round adds 0.2 in (0.5 cm) on every side.

Border Rnd 1: With the RS facing, join Color B (cream) in the top of the last dc of Row 1 (the bottom end).

  • Side A (stitch tops): 2 sc in the last dc (corner), sc in each of the next 36 sts, then 2 sc in the top of the beginning ch-3 (corner). (38 sts worked + 2 extra = 40 sc.)
  • End 2 (top end): Turn the piece and work 2 sc evenly down the post of the beginning ch-3. (2 sc.)
  • Side B (foundation chain): Working in the free loops of the chain, work 2 sc in the first free loop (at the base of the first dc), sc in each of the next 35 loops, then 2 sc in the last loop. (37 loops worked + 2 extra = 39 sc.)
  • End 1 (bottom end): Work 2 sc evenly up the post of the last dc. (2 sc.)

Join with a sl st to the first sc. Round total: 40 + 2 + 39 + 2 = 83 sc.

Fasten off, leaving an 8 in (20.3 cm) tail.

Why the math works: Side A has 38 stitch tops, so it gets 38 sc plus 2 corner extras. Side B has 37 free loops, because the first 3 chains became the beginning ch-3. Every free loop gets 1 sc, and each of the 2 corners gets 1 extra. The increase sections and the dc2tog sections both still have exactly 1 free loop per chain, so the count doesn’t change. Each end is one dc post, 0.5 in (1.3 cm) long. The 2 sc on each end plus the corner increases next to them make a neat, rounded tip. The corner extras are counted in Side A and Side B only, never again in the ends.

The tops of the cream sc sit along the edge and form a neat, braided-looking outline.

Flowers (Make 3)

With Color C (lilac), make a magic ring.

Rnd 1: Ch 1, work 5 sc in the ring, and join with a sl st to the first sc. Pull the ring closed. (5 sc.)

Rnd 2: (Sl st, ch 2, 2 dc, ch 2, sl st) all in the next sc; repeat from * 4 more times. (5 petals.)*

Fasten off, leaving a 6 in (15.2 cm) tail. Each flower is about 0.75 in (1.9 cm) across.

Center: With Color E (yellow), make one French knot (2 wraps) in the center of the ring. Secure it on the back.

Leaves (Make 6)

With Color D (sage green), ch 5.

Row 1: Sl st in the 2nd ch from the hook, sc in the next ch, hdc in the next ch, and sc in the last ch. (4 sts.)

Fasten off, leaving a 6 in (15.2 cm) tail. Each leaf is about 0.5 in (1.3 cm) long, with a pointed tip at the sl st end.

Assembly

Lay out the appliqués on the RS of the blocked letter before you sew anything:

  1. Flower 1: Place it on the top end, near the upper right tip, with 2 leaves tucked behind its right side.
  2. Flower 2: Place it on the left edge where the top bowl meets the middle stroke, with 2 leaves tucked behind its left side.
  3. Flower 3: Place it on the bottom bowl at the lower right, with 2 leaves tucked behind its right side.

Let each flower overlap the cream border slightly, and let the leaf tips stick out past the outline. Pin everything in place. Sew the leaves first, then the flowers, using small stitches through the flower center and between the petals. Keep your stitches shallow so they don’t show on the back.

Hardware: Sew a small jump ring through the cream border at the top of the upper bowl, about 0.75 in (1.9 cm) to the left of Flower 1. Link the chain and split ring to it.

Final Blocking

  1. Weave in all ends along the back of the coral band.
  2. Mist the letter lightly until it’s damp, not soaked.
  3. Lay it RS up on the blocking board.
  4. Shape the S so the coral body measures 3.1 in (7.9 cm) x 2.2 in (5.6 cm).
  5. Pin the outer curves first, then ease the inner curves so the cream edge lies flat.
  6. Check the overall size: 3.5 in (8.9 cm) x 2.6 in (6.6 cm).
  7. Let it dry completely, which takes about 4 to 6 hours.
  8. Sew on the appliqués and hardware only after the letter is dry.

Final Quality-Control Checklist

  • Row 1 has 38 sts.
  • The border has 83 sc: 40 + 2 + 39 + 2.
  • The band is 0.9 in (2.3 cm) wide after the border.
  • The letter measures 3.5 in (8.9 cm) x 2.6 in (6.6 cm).
  • Both bowls open evenly, with no twisting.
  • The cream edge lies flat on both the inner and outer curves.
  • All three flowers have 5 petals and a yellow center.
  • All six leaves are attached, two per flower.
  • The jump ring goes through the border, not just the coral stitches.
  • All ends are woven in and trimmed.

Troubleshooting

The top bowl doesn’t curl enough: Your dc may be too short. Pull up a slightly taller first loop, or use a 4.0 mm hook for Row 1 only.

The top bowl curls into a spiral: Your dc are taller than gauge. Go down 0.5 mm.

The bottom bowl cups: Your dc2tog tops are too tight. Loosen the final yarn-over pull.

The border ruffles on the outer curves: You may have added extra sc. Recount, making sure you work only 1 sc per stitch or loop.

The border pulls on the inner curves: Your sc are too tight. Go up 0.5 mm for the border round.

The letter twists: Block it flat with a pin every 0.5 in (1.3 cm) and let it dry fully.

The flowers flop forward: Add one stitch through each petal tip into the border.

Care

Spot clean or hand wash in cool water with mild soap. Take off the hardware if you can, then press the letter flat in a towel and dry it flat.

A crocheted coral S-charm with purple flowers and green leaves hangs from a denim backpack near a warm latte.

Final Notes

Every measurement builds on the one before it. A 40-chain foundation at 5 stitches per inch gives a 38-stitch Row 1 that curves into an S measuring 3.1 in (7.9 cm) x 2.2 in (5.6 cm). The 83-stitch cream border adds 0.2 in (0.5 cm) on each side, bringing the letter to 3.5 in (8.9 cm) x 2.6 in (6.6 cm). Three lilac flowers and six leaves finish the charm.

Try different colors to match a favorite bag.

Happy crocheting!

Leave a Comment