The Coral Lagoon holder is a long teal wall panel with three round lattice baskets stacked down the front. Each basket holds one standard toilet paper roll, and the whole piece hangs from a wooden ring, so it works on a towel hook, a door hook or a single wall knob.
The colors are a warm coral peach and a deep teal. The baskets are mostly peach, with crossed double crochet stitches forming a diamond lattice over thin teal stripes, so small teal diamonds show between the crosses. A thick teal rim finishes each basket. The panel is solid teal single crochet with a smooth peach border and a peach hanging tab.
This pattern uses US crochet terms. The finished panel measures about 7 in (17.8 cm) wide and 24.1 in (61.2 cm) long, or about 27 in (68.6 cm) including the tab and ring. Each basket is about 5.25 in (13.3 cm) across at its widest point and 4.25 in (10.8 cm) tall.
Construction is simple. You make three baskets in the round from the base up, then the panel in rows from the bottom up, ending with a narrow tab. You add a two-row border to the panel, fold the tab over the ring, and sew the baskets in place.
Finished Size and Construction
- Finished panel size: 7 in x 24.1 in (17.8 cm x 61.2 cm)
- Overall hanging length: about 27 in (68.6 cm) including the ring
- Skill level: Intermediate
- Terminology: US terms
- Yarn weight: Worsted (#4), cotton recommended
- Hook: 5.0 mm (H-8)
- Number of pieces: 4 crocheted pieces (1 panel, 3 baskets) plus 1 wooden ring
- Layout: 3 baskets stacked in a single vertical column on the panel
- Basket size: 5.25 in (13.3 cm) across at the widest point, 4.25 in (10.8 cm) tall
- Panel size before border: 6 in x 23.6 in (15.2 cm x 59.9 cm)
- Border depth: about 0.5 in (1.3 cm)
Materials
Yarn: Use a worsted-weight 100% cotton or a cotton blend. Cotton holds the basket shape well, doesn’t stretch out under the weight of the rolls, and handles bathroom humidity well. Avoid very soft or loosely plied yarns, which make floppy baskets.
- Color A, Deep Teal: 150 g, about 240 m (262 yd)
- Color B, Coral Peach: 150 g, about 240 m (262 yd)
Quantities include a margin of about 10% for gauge swatches and differences in tension.
Tools:
– 5.0 mm (H-8) crochet hook
– 1 wooden ring, 2.5 in (6.4 cm) diameter
– Stitch markers (at least 4)
– Tapestry needle
– Scissors
– Measuring tape
– Rust-proof pins and a blocking surface
– Optional: spray bottle
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- inc: 2 sc in the same stitch
- sc2tog: single crochet 2 together
- BLO: back loop only
- MR: magic ring
- st(s): stitch(es)
- RS / WS: right side / wrong side
Special stitch, Crossed Double Crochet (Xdc): Skip the next st, dc in the following st, then, working in front of the dc you just made, dc in the skipped st. One Xdc uses 2 sts and makes 2 sts.
Color change: Work the last yarn over of the joining sl st with the new color. Don’t cut the unused color; carry it up inside the basket at the join.
Gauge and Checkpoints
Gauge: 16 sc x 18 rows = 4 in (10.2 cm) in sc worked flat. A crossed double crochet round measures about 0.5 in (1.3 cm) tall.
Test one piece first. Make one complete basket before anything else. It is the best gauge check you have, because the roll has to fit inside it.
Checkpoints:
– Basket after Round 6 (36 sts): 2.9 in (7.4 cm) across
– Basket after Round 10 (60 sts): 4.8 in (12.2 cm) across, lying flat
– Basket after Round 12 (66 sts): 16.5 in (41.9 cm) around
– Finished basket: 4.25 in (10.8 cm) tall, rim 4.8 in (12.2 cm) across
– Panel after Row 7: 6 in (15.2 cm) wide
– Panel after Row 79: 17.6 in (44.7 cm) long
If your piece is too big, switch to a 4.5 mm hook. If it is too small, switch to a 5.5 mm hook. Don’t add or remove stitches to fix size, because the lattice repeat and the border math both depend on these exact counts.

Basket (Make 3)
Begin with Color B. Join each round with a sl st to the first st. Ch 1 at the start of sc rounds does not count as a stitch. Keep all joins in a straight line; this seam becomes the back of the basket, against the panel.
Base
Round 1: With B, MR, 6 sc in ring, join. (6 sts)
Round 2: Inc in each st around, join. (12 sts)
Round 3: Sc 1, inc 6 times, join. (18 sts)
Round 4: Sc 2, inc 6 times, join. (24 sts)
Round 5: Sc 3, inc 6 times, join. (30 sts)
Round 6: Sc 4, inc 6 times, join. (36 sts)
Round 7: Sc 5, inc 6 times, join. (42 sts)
Round 8: Sc 6, inc 6 times, join. (48 sts)
Round 9: Sc 7, inc 6 times, join. (54 sts)
Round 10: Sc 8, inc 6 times, join. (60 sts)
The base should lie flat and measure 4.8 in (12.2 cm) across.
Turn-Up and Belly
Round 11: Ch 1, sc BLO in each st around, join. (60 sts) The free front loops make a crisp edge where the base meets the sides.
Round 12: Ch 1, sc 9, inc 6 times, join. This conversion round works 60 sts one-for-one and adds 6, for 60 + 6 = 66 sts. Change to A at the join.
Lattice Sides
Round 13: With A, ch 1, sc in each st around, join. (66 sts) Change to B.
Round 14 (Lattice A): With B, ch 2 (does not count), Xdc 33 times around, join to the first dc. (66 sts: 33 crosses) Change to A.
Round 15: With A, ch 1, sc in each st around, join. (66 sts) Change to B.
Round 16 (Lattice B, offset): With B, ch 2 (does not count), dc in first st, Xdc 32 times over the next 64 sts, dc in last st, join. (66 sts: 1 dc + 64 + 1 dc) The offset puts each new cross between two crosses of Round 14, which builds the diamond lattice. Change to A.
Rounds 17–20: Repeat Rounds 13–16. (66 sts each round) At the end of Round 20, keep B.
The teal sc rounds sit low between the raised peach crosses, so they show only as small teal diamonds.
Rim
Round 21: With B, ch 1, sc 9, sc2tog 6 times, join. (60 sts) Change to A and cut B.
Rounds 22–24: With A, ch 1, sc in each st around, join. (60 sts each round)
Fasten off and leave a 36 in (91.4 cm) tail of A for sewing. Weave in the other ends on the inside.
The basket is 4.25 in (10.8 cm) tall, with a rim 4.8 in (12.2 cm) across and a slightly wider belly. A standard roll about 4.5 in (11.4 cm) across should slip in easily.
Backing Panel
Work in rows with Color A. Ch 1 at the start of each row does not count as a stitch.
Rounded Bottom
Row 1 (RS): With A, ch 13, sc in 2nd ch from hook and in each ch across. (12 sts)
Row 2: Ch 1, turn, 2 sc in first st, sc across to last st, 2 sc in last st. (14 sts)
Row 3: Repeat Row 2. (16 sts)
Row 4: Repeat Row 2. (18 sts)
Row 5: Repeat Row 2. (20 sts)
Row 6: Repeat Row 2. (22 sts)
Row 7: Repeat Row 2. (24 sts)
The panel is now 6 in (15.2 cm) wide and the curve is about 1.6 in (4.1 cm) deep.
Straight Section
Rows 8–79: Ch 1, turn, sc in each st across. (24 sts each row, 72 rows)
The straight section is 16 in (40.6 cm) long, and the panel measures 17.6 in (44.7 cm) from the bottom.
Taper
Row 80: Ch 1, turn, sc2tog, sc across to last 2 sts, sc2tog. (22 sts)
Rows 81–82: Ch 1, turn, sc in each st across. (22 sts)
Repeat these 3 rows (1 decrease row followed by 2 plain rows). Decrease rows fall on Rows 83, 86, 89, 92, 95, 98, 101 and 104, with these counts:
- Row 83: 20 sts
- Row 86: 18 sts
- Row 89: 16 sts
- Row 92: 14 sts
- Row 95: 12 sts
- Row 98: 10 sts
- Row 101: 8 sts
- Row 104: 6 sts
Rows 105–106: Ch 1, turn, sc in each st across. (6 sts)
The taper covers Rows 80–106 (27 rows) and is 6 in (15.2 cm) long. The teal body is now 23.6 in (59.9 cm) long. Fasten off A.
Hanging Tab
Rows 107–118: Join B, ch 1, sc in each st across, turning each row. (6 sts each row, 12 rows)
The tab is 1.5 in (3.8 cm) wide and 2.7 in (6.9 cm) long. Fasten off and leave a 12 in (30.5 cm) tail.
Make All Pieces
Totals:
– 3 baskets: Color B for base, lattice and Round 21; Color A for stripe rounds and rim
– 1 panel: Color A body; Color B tab and border
– 1 wooden ring
Layout (front view):
( ring )
[tab]
/taper\
| |
| TOP | base on Row 52, rim to Row 71
| |
| MIDDLE| base on Row 28, rim to Row 47
| |
| BOTTOM| base on Row 5, rim to Row 24
\_____/
Each basket spans 19 rows, or 4.25 in (10.8 cm). The gaps between baskets are 4 rows, or about 0.9 in (2.3 cm).
Joining
Complete the Border (next section) and attach the ring before sewing on the baskets. The border is much easier to work while the panel is flat.
Ring: Fold the tab over the ring to the WS. Whipstitch Row 118 across the back of Rows 101–104, matching 6 sts to 6 sts.
Method: Whipstitch with the A tail on each basket. Place each basket with its join seam centered against the panel. Pin it so the base edge (Round 11) sits on the starting row from the layout, and the rim top lines up with the ending row.
Stitch-to-stitch logic:
1. Rim: Sew the center-back 12 sts of Round 24 to the center 12 sts of the panel row. One rim st goes to one panel st. This 3 in (7.6 cm) seam carries most of the weight.
2. Back line: From the center of the rim seam, sew straight down the basket’s join seam. Catch one panel st per sc round, and one per half-height of each Xdc round, down to Round 11.
3. Base: Sew the 6 back sts of Round 11 to the starting row.
Tension: Pull each stitch snug but not tight. The panel should stay flat, without puckering behind the basket.
Size checkpoint: After all three baskets are sewn on, the panel should still measure 7 in (17.8 cm) wide at the straight section. The baskets should be spaced evenly, with gaps of about 0.9 in (2.3 cm).
Border
Border gauge: Along the straight edges, 16 border sc = 4 in (10.2 cm) of row ends. Because 18 rows = 4 in, you work 8 sc for every 9 row ends.
Work the border in rows with Color B. It starts and ends where the tab meets the body.
Border Row 1 (RS): Join B in the row end of Row 106 on the right edge. Ch 1, then work:
– Taper (Rows 106–80): 1 sc in each row end. (27 sts)
– Straight section (Rows 79–8): Sc in next 8 row ends, skip 1 row end 8 times. (64 sts)
– Curve (Rows 7–1): 1 sc in each row end. (7 sts)
– Bottom: 2 sc in the first foundation ch, sc in the next 10 ch, 2 sc in the last ch. (14 sts)
– Up the left edge, mirror the right edge: 7 + 64 + 27. (98 sts)
Totals: right side 98, bottom 14, left side 98, for 210 sts.
Border Row 2: Ch 1, turn, sc in each st, working 2 sc in each of the 4 corner sts (the 2-sc pairs at the bottom). Totals: right side 98, bottom 14 + 4 = 18, left side 98, for 214 sts. Fasten off.
Why the math works: The straight section has 72 rows at 4.5 rows per inch, which is 16 in. Working 8 sc in every 9 row ends gives 64 sc. At 4 sts per inch, that is also 16 in, so the edge neither ruffles nor pulls. The taper and curve edges run on a diagonal, so each row end is longer and gets a full sc. The corner increases let the border turn around the rounded bottom smoothly.
Two sc rows add about 0.5 in (1.3 cm) all around. The panel goes from 6 in to 7 in (15.2 cm to 17.8 cm) wide and from 23.6 in to 24.1 in (59.9 cm to 61.2 cm) long.
Final Blocking
- Remove the baskets from blocking if you blocked before sewing. Otherwise, block the finished assembly.
- Spray the panel lightly until it is damp but not soaked.
- Lay the panel face up and pin it to 7 in x 24.1 in (17.8 cm x 61.2 cm). Keep the taper symmetrical and the bottom evenly rounded.
- Push a toilet paper roll or a rolled towel into each damp basket to set the round, bellied shape.
- Check the rims of the baskets. Pinch each teal rim into an even circle 4.8 in (12.2 cm) across.
- Let everything dry completely, usually 12–24 hours for cotton, before you hang the holder.
Final Quality-Control Checklist
- Each basket has 60 sts in Round 10, 66 sts in Rounds 12–20 and 60 sts in Rounds 21–24.
- The lattice crosses alternate position on every peach round.
- The basket join seams face the panel and are hidden.
- The panel has 24 sts in Rows 7–79 and 6 sts in Rows 104–118.
- The border has 214 sts in Row 2.
- The panel is 7 in (17.8 cm) wide.
- The tab is sewn securely and the ring doesn’t twist.
- The baskets are centered with gaps of about 0.9 in (2.3 cm).
- All ends are woven in on the WS or inside the baskets.
Troubleshooting
The basket base cups upward. Your tension is tight. Go up a hook size for Rounds 1–10 only.
The base ruffles. Your tension is loose. Go down a hook size for the base.
The lattice looks like stripes, not diamonds. You skipped the offset on Rounds 16 and 20. Each of those rounds must start with a single dc.
Too much teal shows. Pull the teal sc rounds snugly. The crosses should lie over them.
The roll doesn’t fit. Check that the rim has 60 sts and you didn’t decrease twice.
The panel edge waves. Recheck the 8-in-9 spacing along the straight section of the border.
The baskets droop forward. Add a second whipstitch pass across the rim seam.
Care
Hand wash in cool water and lay flat to dry, reshaping the baskets over a roll. Don’t hang the holder until it is fully dry.

Final Notes
The measurement chain is short and checkable. Gauge is 16 sc x 18 rows = 4 in (10.2 cm). The basket base is 60 sts and 4.8 in (12.2 cm) across, and the belly is 66 sts and 5.25 in (13.3 cm) across. The rim is 60 sts and 4.8 in (12.2 cm) across, and the finished basket is 4.25 in (10.8 cm) tall. The panel is 24 sts and 6 in (15.2 cm) wide, and 106 rows or 23.6 in (59.9 cm) long. The border adds 0.5 in (1.3 cm) all around, for a finished panel of 7 in x 24.1 in (17.8 cm x 61.2 cm). If each checkpoint matches, the three baskets will sit straight, hold their rolls, and hang neatly from the ring.
Happy crocheting!